Connection issue of AIR-AP1141N-A-K9.

Dear all,
I have some connection trouble with AIR-AP1141N-A-K9.
I put a IP camera in my home and connect to AIR-AP1141N-A-K9 via wireless.
After a while about 1 week, the wireless will be dissociated.
Does anyone have the same issue of wireless?
Below are some information & log message of AP.
Please give me some suggestion to resolve this issue, thanks.
AP information
Product/Model Number: AIR-AP1141N-A-K9
Top Assembly Serial Number: FTX1533KDNF
System Software Filename: c1140-k9w7-tar.124-21a.JA1
System Software Version: 12.4(21a)JA1
Bootloader Version: 12.4(23c)JA1
System Uptime: 3 days, 2 hours, 39 minutes
Log message
sh syslo               loo   gg
SEKISUI_184#sh logging
Syslog logging: enabled (1 messages dropped, 2 messages rate-limited,
                0 flushes, 0 overruns, xml disabled, filtering disabled)
    Console logging: level debugging, 84 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
                     filtering disabled
    Buffer logging: level debugging, 84 messages logged, xml disabled,
                    filtering disabled
    Logging Exception size (4096 bytes)
    Count and timestamp logging messages: disabled
    Trap logging: level informational, 85 message lines logged
--More--
Log Buffer (4096 bytes):
6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Sending station has left the BSS
May 18 16:03:56: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 16:04:39: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Sending station has left the BSS
May 18 16:04:44: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 16:06:08: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Sending station has left the BSS
May 18 16:06:13: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 16:40:27: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:40:27: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Previous authentication no longer valid
May 18 16:40:27: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:40:42: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 16:43:03: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
--More--                           May 18 16:43:03: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Previous authentication no longer valid
May 18 16:43:03: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:43:18: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 16:45:35: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:45:35: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Previous authentication no longer valid
May 18 16:45:35: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:45:50: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 16:48:01: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:48:01: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Previous authentication no longer valid
May 18 16:48:01: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 16:49:43: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 17:00:37: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
--More--                           May 18 17:00:37: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.287a Reason: Previous authentication no longer valid
May 18 17:00:37: %DOT11-4-MAXRETRIES: Packet to client f07d.6806.287a reached max retries, removing the client
May 18 17:03:39: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.287a Associated KEY_MGMT[NONE]
May 18 17:10:12: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.286e Reason: Sending station has left the BSS
May 18 17:10:12: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.286e Associated KEY_MGMT[NONE]
May 18 17:10:30: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.286e Reason: Sending station has left the BSS
May 18 17:10:35: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.286e Associated KEY_MGMT[NONE]
May 18 17:10:54: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.286e Reason: Sending station has left the BSS
May 18 17:11:00: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.286e Associated KEY_MGMT[NONE]
May 18 17:15:23: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f07d.6806.286e Reason: Sending station has left the BSS
May 18 17:15:29: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   f07d.6806.286e Associated KEY_MGMT[NONE]
SEKISUI_184#    =

f07d.6806.286e
Is this the MAC address of your wireless camera? A D-Link?
If this is so, can I ask you to post the output to the command "sh dot11 assoc f07d.6806.286e"?

Similar Messages

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

My MacBook Air has recently started having substantial WiFi connectivity issues. How do I fix this?

For the last couple weeks my MacBook Air has started having some mighty substantial connectivity issues.
When I wake it from sleep, or if I'm using it for an extended period (say, more than 5-10 minutes), the connection will become extremely unreliable. This primarily happens with browsers, or the Twitter application. For example, if I start a call on Skype the call will continue to function just fine, but I won't be able to connect to any websites through any browser. I've tried Safari, Chrome, and Firefox while the connectivity problems are occuring. When they do occur, a full shut down and cold boot are required to make it work again for a short while.
Does anyone know what might be causing this? I've done numerous checks for malware using Clam Xav and Sophos Anti-Virus. (I didn't suspect that this would be the issue, but it was still something that I decided to rule out.) Additionally, I've tried connecting using both the 2.4GHz and 5GHz bands on my wireless router. Neither seems to be more successful than the other. (Note: The 5GHz works perfectly and without interruption on my iPad and desktop PC. The 2.4GHz works perfectly with my iPhone 4S and Xbox 360. I feel that with that in mind, I can safely rule out the router as the root of the problem. Both of these examples go on for very extended periods of time. I game regularly using both my PC and Xbox 360.)

Hi Jollified,
Does your sound work when you try to use head/earphones? If so, try the following:
Plug your Headphones into your Mac.
Play a sound through them (a song for example), then stop the sound.
Make sure 'Preferences' is isn't open. If it is, Quit.
Launch System Preferences > Sounds.
While the Sounds tab is open and set to 'Headphones', pull out the Headphones from the jack.
You should see your Mac reset to 'Internal Speakers'
Also, I see you have tried resetting the PRAM, have you tried resetting the System Management Controller (SMC)? Resetting the System Management Controller (SMC) on your Mac - Apple Support
As for your MacBook not sleeping when you close the lid, there are many reasons this can occur.
First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following:
A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
Energy Saver > Schedule > Startup or Wake - Uncheck.
Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
Good luck!

Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??

Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??

iOS: Troubleshooting Personal Hotspot - Apple Support

Im having trouble with my ipad wifi connection my mac air has no issues but ipad not working

hello,
Im having trouble with my wifi connection.
Ive reset the router, reset all my connections, still no good.
It keeps spinning when trying to connect
my mac air and other apple products are fine on same internet connection
the cellular connection works just having issue with ipad3

i did the reset of network settings.. still no good. recently upgraded to new os 6.1 version any way to go back to older version of os?

Setting Up air-ap1141n-a-k9?

I recently acquired a air-ap1141n-a-k9 but I do not know how to set it up. I know this is probably really simple but I looked through the manual and couldn't figure it out.
It says "Assign a static IP addresss by conencting to its console port and accessing the access point CLI"
I connected an ethernet cable to the console port and my computer. How do I access the access point CLI though?

@Josh,
Basically you need to get yourself a console cable (Cisco Blue Cable) and connect that using a Serial port on your computer or a USB to Serial dongle. After doing so power up the AP then you should get console access to the AP. If you don't know the IP address assigned to the management interface on the AP this is the only way to get it working.
After you get console access issue the following commands to setup your managment interface IP address to something you want or to suit it to your network.
AP>en
password: (Enter the password default is "Cisco")
AP#show ip interface brief (This will show you the IP address assignments for the interfaces)
Interface                  IP-Address      OK? Method Status                Protocol
Dot11Radio0                unassigned      NO unset up                    up
Dot11Radio1                unassigned      NO unset up                    up
FastEthernet0              unassigned      YES DHCP   up                    up
NOTE: If Fa0 is unassigned DHCP, this makes it bit easier to configure. Basically just by plugging in the AP ETHERNET port into your network which has a DHCP server will assign a IP address for that interface. Then you can run the same command "show ip interface brief" to see the IP address the interface grabbed from the DHCP server. After finding out the IP address you can just use a web browser and access the AP GUI using that same IP address. https://xxx.xxx.xxx.xxx, this should get you access to the management.
If the interface is NOT set to DHCP then you need to manually set the IP address that suit your network. Following command will assist in doing that for you.
AP#lwapp ap ip address ?
A.B.C.D static IP address
AP#lwapp ap ip address xxx.xxx.xxx.xxx
Also more information on manual configuration and reseting with troubleshooting can be found @ the link below.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a00808e2d27.shtml
Hope this helps and please rate.
Cheers
Lal Antony
www.lalantony.com

HT1338 cannot connect my MacBook Air to a projector -does not detect and 2nd monitor. I have a new Mini port to VGA cable made by apple. When I read online I see that many people have the same problem - Is this an Apple defect??????????????????

I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

IS THERE ANY TRICK TO CONNECT THE MACBOOK AIR TO A VGA PROJECTOR? (I HAVE PROPER APPLE CABLE)

Is there any trick to connect the macbook air to a vga projector?
(I have the Apple right cable).
I'm a professor in Brazil and just starting using the macbook air...

Hi LCMONTANARI,
If you are having issues connecting an external display or projector to your MacBook Air, you may find the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?

It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

4S Verizon Network / Internet Connectivity Issues?

I have been having problems with what appears to be Verizon Network/Internet Connectivity issues. I am located in northern Colorado, using an iPhone 4S with a Mophie Air battery backup/case.
I am in a solid 4G area (even though the phone is 3G) and I have not had any problems with any connection issues, until last night. I still see three bars of 3G service on the phone indicator area...so it is decieving.
I can still recieve emails, text messages, and phone calls, but nothing that uses the internet will work. All apps seem to try to open and try to update, but the whizzy-wheel indicator just sits and spins until I get a "Network Error" message or a time out error of some kind. Most error pop-ups are saying to check the internet settings and try again. Ugh!
Also, since it seems to be trying to recognize the network all the time (even when all tasks are killed and nothing should be running), my battery is going down MUCH faster today! I took it off of the charger at 7am and it was down to 20% battery in only 4 hours! Then I turned on the battery backup, and it is quickly using that up too! At this rate my phone will be completely DEAD by the time I leave work today, and I haven't even used it for anything all day (except to try to connect to the web a few times - testing)!
I have tried the following so far to try to regain internet through the Verizon network, to no avail:
checked for software updates...phone was up to date with iOS 6.0.1
checked my firmware version (it is 3.0.04)
killed all background/running apps (with the home button double-click/hold icon/end)
"reset" my phone via a couple of methods (both the regular power off option and the force-power off option).
*228, option 2 (to reset Roaming)
cleared all data cache areas/cookies/etc.
Cellular data is set to "On"; Roaming is set to "On" for all options;
I have a 64GB device (57.3 usable capacity) of which I still show 46.2 available.
WiFi is set to "Off" (although I can use WiFi at home with no problem if I need to, but I shouldn't have to!)
Airplane Mode is set to "Off"; Restrictions are set to "Off"; Bluetooth is set to "Off"
Basically, there is NO REASON my phone should be having connection issues!
PLEASE HELP?!!

I tried everything you did and more, i thought i had it working, but i got a voicemail today and when i went to open it earlier it just has the wheel loading forever and then says it cant onnect to voicemail. the searching does make it wear down the battery faster as well. i can get calls, texts etc, but i cant help but think there are a few bugs with the ios 6.01 software

Air-ap1141n-e configuration

HI
We have bought an air-ap1141n-e to change another cisco AP.
I really dont know how to start configuration, I just need the AP to be connected to my network
switch so the people in the office have wireless as we have before the otrh AP crashes,
Thanks

You can find other guides that can help you here:
http://www.cisco.com/c/en/us/support/wireless/aironet-1140-series/products-configuration-examples-list.html
http://www.cisco.com/c/en/us/support/wireless/aironet-1100-series/products-configuration-examples-list.html
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Proximity issue with Air Tunes

Hi-
I have read several posts about this but nothing directly related to what I have found.
I have been using an Airport Express for years specifically for steaming music wirelessly via Air Tunes. In the last several months I have noticed that intermittently Air Tunes cuts out. Recently I have found that this has to do with the proximity of my iPhone or other devices proximity to the Air Port Express.
As soon as I get within a few feet of the Air Port Express the music will cut off, when I move further away it resumes. I have tested this extensively and can replicate it without issue so it really seems to be a proximity issue.
This never used to happen, but now happens all the time. I have an IPhone 5 but the problem occurred with my iPhone 4. It also occurs with my wife’s iPhone 3GS and my iPad (first gen).
Has anyone else noticed this proximity issue with streaming wirelessly?

Thanks Chris for this link.
Before launching this action, I have one question : as I am french, I want to install the french
localized version of Community Help.
With the procedure you sent, will it be possible to have such a version, or does-it point only on
the US help version ?
Or should I connect to an adobe.fr site ?Thanks again for our help.
JM
Message du 14/03/11 19:31
De : "chris.campbell"
A : "JM Jarrige"
Copie à :
Objet : Issue with AIR and Help for PSE/PRE
Hi,
Could you try following the instructions in http://kb2.adobe.com/cps/842/cpsid_84215.html and see if it helps?
Thanks,
Chris
>

HT4356 why does it takes so long for my ipad to connect to my air printer i have a up to date bt router

why does it take so long for my ipad to connect to my air printer when i need to print something i have a up to date bt router.

Good Afternoon Geraldine,
I understand you are wondering why you did not receive an email receipt instantly for an iBook purchase made on March 2nd. Is this the first time you've noticed a delay? I would suggest contacting the iTunes Support team to report the issue. With your permission, they can access your account and possibly shed some light on this particular transaction.
See your purchase history in the iTunes Store - Apple Support
https://support.apple.com/en-us/HT204088
Report a problem with an item purchased from the iTunes Store, App Store, Mac App Store, or iBooks Store - Apple Support
https://support.apple.com/en-us/HT204084
Regards,
Judy

I am having wireless connectivity issues with my time capsule

Over the last 3 days my wireless devices have been having issues with connectivity.
Network setup:
Modem - Motorola SB5102 Cable Modem
1 TB Time Capsule 802.11n (second generation)
The devices are approximately 3 feet apart.
Wired Device:
Mac Pro (2008 build) running OSX 10.6.8, Airport Utility 5.6.1
Wireless Devices:
Playstation 3
Macbook Air
iPhone 5c
iPhone 4
I am having issues with internet connectivity. The wireless signal strength is fine as all devices can find the network. However when connected to the network accessing the internet on the Macbook Air, or either iPhone is slow and streaming services such as Netflix cannot connect. I have intermitant connectivity to the Playstation Network on the PS3.
I have wired both the Macbook Air and PS3 directly to the Time Capsule and have no issues, internet is accessible and streaming services are fine.
I have power cycled all the devices (Time Capsule, macbook, iphones, PS3, modem) to no result.
I am looking for any other suggestions that may help me with my wireless connectivity issue.

A Gen2 TC is probably on its last gasp.. and it is well overdue for replacement.
If you want to get more life out of it you normally need to repair or replace the internal power supply.. This is not done by apple or any of their repair centres.
Just do ebay search and you will find sellers with replacement supplies.
Otherwise to test, do a full factory reset..
I would also downgrade the firmware.. 7.5.2 will work just as well for you and has less bugs than 7.6.x firmware.
To downgrade hold down the option key when you select firmware version.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Connection issue of AIR-AP1141N-A-K9.

Similar Messages

Maybe you are looking for