Connection Issue with the DR Server

While trying to create a session to my DR server, I am getting following error -
SQL> conn sys as sysdba
Enter password:
Could not load program oracleEPPRD01:
Symbol resolution failed for /usr/lib/libc.a[aio_64.o] because:
Symbol kaio_rdwr64 (number 1) is not exported from dependent
module /unix.
Symbol listio64 (number 2) is not exported from dependent
module /unix.
Symbol acancel64 (number 3) is not exported from dependent
module /unix.
Symbol iosuspend64 (number 4) is not exported from dependent
module /unix.
Symbol aio_nwait (number 5) is not exported from dependent
module /unix.
Symbol aio_nwait64 (number 6) is not exported from dependent
module /unix.
Symbol aio_nwait_timeout (number 7) is not exported from dependent
module /unix.
Symbol aio_nwait_timeout64 (number 8) is not exported from dependent
module /unix.
System error: Error 0
Examine .loader section symbols with the 'dump -Tv' command.
ERROR:
ORA-12547: TNS:lost contact
Where can be the problem?

Is it possible you don't have AIO configured or enabled? Did you run rootpre.sh at installation time? See the installation guide for the prerequisites for Oracle server on AIX.
Werner
Not exactly your error stack (and even not Oracle), but it sounds similar:
http://www-01.ibm.com/support/docview.wss?rs=634&context=SSGU5D&dc=DB560&dc=DB520&uid=swg21253974&loc=en_US&cs=UTF-&lang=en&rss=ct634db2
Edited by: oradba on 22.04.2010 17:37

Similar Messages

Itunes wont connect me with the iphone server to upgrade

I am getting really ticked about this one. I had this in both tiger and now in Leopard. I cannot connect with the itunes store to access my iphone update. the request times out, and then itunes gives me an error message saying I do not have permission to access the requested source. Anyone have clues about this? I didn't start having problems until I got the iphone. I also have frequent error messages from the store saying that my connection was lost and the it has reset. I have checked all firewall issues, and no connection issues with the internet.
Does anyone out there have help?

Yes, that's the case. Just as my iPhone 3G has topped out at version 4.2 while the newer iPhones, iPod Touches, and the iPads are on 4.3.

Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
It happened immediately following the update. I was sending emails and browsing before the update without a problem.
from apple:

I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless. (deleting a top site means you are blocking it from that page) Have not had the message since so it must have had something to do with top sites activity.
Just a note: Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

Network connectivity issues with the iphone 5

has anyone had issues with the iphone 5 in terms of network connectivity

yep loads of postings if its re the wifi issue

Having a connection issue with the WRT54GS Wireless Router

We just recently got Broadband internet. We had issues with it at first, because the Ethernet cable included wasn't working properly, and instead, the guy got us connected via USB cable. Now, I just bought this Router yesterday, and made the mistake of unplugging the USB and plugging in the extra cable. I did everything as instructed in the Easylink Advisor program. My connection was messed up, and I could not connect at all. After calling Tech support, they reset our modem and everything (cable modem and internet-wise) is as good as new. I went out and bought a new Ethernet cable, so now I have 2 perfectly new cables, and left the USB cable plugged in, so I don't throw it off as I did yesterday. I still can't get the Port 1 light to come on. the WLAN light is on, as well as the Internet light, but no Port lights will turn on. Anyone have any ideas? Thanks in advance! -Chris-

Are you getting online via ethernet with the modem now? Make sure your local area network is enabled. Go to control panel then network connections.
Message Edited by Pio04 on 07-11-2007 11:47 AM

Bluetooth connectivity issue with the car hand free

I started having a problem when I updated my software to the latest version. The Bluetooth is keep connecting and disconnecting in an annoying way once I start any music with my mobile Z3 device.

You may need to remove the handset from car's Bluetooth memory, then re-add it. Also, remove the car from the handset's Bluetooth memory, then re-add.

Connectivity issues with the 10.4.7 update????

Hello all,
Just wondering, has anybody else out there been having problems connecting using WPA or WEP after applying the latest 10.4.7 update on the Macbook?
I have a Dlink DI-524 router connecting 3 WinXP PCs, 1 Macbook, and 1 Ubuntu Linux machine and cannot get the Macbook to connect to the router/network. All other machines have no problems. It will only connect when the encryption is removed. I had zero problems before this patch. Thanks for you help.

Thanks all for your help but I may have found something. I "downgraded" my firmware on my Dlink DI-524 from the current "3.20" back to its original as shipped version of "3.02" and only enabled wpa for security and using the static IP DHCP addressing by mac id assignment enabled. I picked up the tip from another posting on this forum. Do a search for "di-524" and you will find it.
I have left mac id filtering off, ssid broadcasting on, "g" version only. So far it has held onto the network and has reconnected on its own after sleeping and restarting. I will do some more testing and give my results.

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

IMac isn't loading a specific website (can't connect to that server), regardless of browser, though the same website will load on other computers on same network. Is it an issue with the iMac's settings?

Our iMac isn't loading a specific website (we get a message saying it can't connect to that specific server), regardless of browser (I've tried it in Chrome, Safari, and Firefox). However, the same website, which is for a major medical provider, loads without any issue on our other computers on the same wireless network. Is it an issue with the iMac's settings? All other websites seem to be loading without issue on the iMac.

... Is it an issue with the iMac's settings?
Possibly. Make sure you are not using a proxy server. Look in Safari Preferences > Advanced > Proxies > "Change Settings..." This will take you to the applicable Network Preferences. Make sure that nothing is selected in the "select a protocol to configure" list. It should look like this:
Still not working?
Locate your Terminal app. It is in your Utilities folder. Open Terminal.
In Terminal, copy (triple-click) and paste the following line:
osascript -e 'tell application "System Events" to get name of every login item'
This will produce a list of all your account login items.
While you are in Terminal, copy (triple-click) and paste the following line:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
This will produce a list of all non-Apple kernel extensions. There will be few, if any.
Post the results of the above.

I have Snow Leopard 10.6.8 on my MacBook. Constantly dropping internet connection or message "error connecting to the network" comes up. No wireless connectivity issues with windows 7 laptop or iphone.

I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.

Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Connection Issue with the DR Server

Similar Messages

Maybe you are looking for