Connection key doesn't recognize Contribute Installation

I generated a connection key via Contribute, to try and test
a problem that a user is having. When I tried to use the key, I got
an error message saying "Please install Adobe Contribute CS3 using
setup.exe". Well, obviously it's already installed. Any
ideas?

I've got the same problem.

Similar Messages

Itunes crashes when iPod is connected and doesn't recognize it (iPod touch)

Help! Whenever I plug my iPod in my iTunes freezes! Both my iPod and iTunes work perfectly fine it's just when my iPods connected. It also doesn't recognize it but it appears on my computer. It was fine before and this problem only occurred very recently. I have the newest iTunes. Any ideas on what I could do? Thanks for your help

My problem still isnt solved however I have got further. This has taken me many hours but by searching for ages, i tried the msconfig idea on itunes. After following the instructions, i found that it stopped my itunes from crashing. I then found the root of the problem - it was the Apple Mobile Device which was interfering and crashing my itunes. So i deleted it and yes my itunes was not crashing however I need it to sync my ipod..hmm.. so if I reinstall it, it crashes my itunes and if I dont, I still cannot sync my ipod.
Im not too sure what to do now however I feel a sense of achievement for getting somewhere.. Thanks for your help again X

Connection key doesn't work

Hi, I have Contribute CS3/Dreamweaver CS3. When I create a
connection key, then send it to a user (or try to use it myself) I
get the message "Your FTP username or password is incorrect." In
testing: I create a key in DW/CS3, place it on my Mac deskcop, then
open Contribute CS3, double-click the key, I get the message. If I
create a new connection in Contribute CS3 as admin, I can get in to
edit site. I create a connection key, place it on my Mac desktop,
remove the connection in Contribute CS3, then double-click the new
key, I get the same message. Same problem for clients. All sites,
all clients. I can walk a client through manually adding the
connection and it works just fine. Anyone with any ideas why the
keys don't work???

Thanks for sharing.
John
"Art Shotwell" <[email protected]>
wrote in message
news:C28C938F.14B2D%[email protected]..
> It took several days of back-and-forth with Adobe
support, but I finally
> got
> an answer and so I thought I'd post it here for
everyone. Contribute 4.11
> has a problem storing FTP passwords that include special
characters such
> as
> & or *, which I always use in my FTP passwords.
Changing passwords fixes
> Adobe's problem. Support told me this was a known
problem and their
> engineers are working on it.
>
>
> On 5/31/07 10:33 PM, in article
f3ob3i$gv7$[email protected], "Art
> Shotwell" <[email protected]> wrote:
>
>> Hi, I have Contribute CS3/Dreamweaver CS3. When I
create a connection
>> key,
>> then
>> send it to a user (or try to use it myself) I get
the message "Your FTP
>> username or password is incorrect." In testing: I
create a key in DW/CS3,
>> place
>> it on my Mac deskcop, then open Contribute CS3,
double-click the key, I
>> get
>> the
>> message. If I create a new connection in Contribute
CS3 as admin, I can
>> get in
>> to edit site. I create a connection key, place it on
my Mac desktop,
>> remove
>> the
>> connection in Contribute CS3, then double-click the
new key, I get the
>> same
>> message. Same problem for clients. All sites, all
clients. I can walk a
>> client
>> through manually adding the connection and it works
just fine. Anyone
>> with any
>> ideas why the keys don't work???
>>
>
>

X201 Access Connections doesn't recognize WiFi card

Hi
A week or so ago I ran Lenovo System Update, which prompted me to update the drivers for my WiFi card (Intel 6200-AGN). After the update Access Connections can no longer recognize the card. Windows still connects automatically to wireless networks through the built-in software, but Access Connections not working is really bothering me.
I've tried rolling back the wireless drivers (my current version is now 14.3.0.6, dated 10/27 2011), but with no luck. As far as I can see, there have been no updates to Access Connections for quite a while (it's hard to tell due to system update itself recently being updated), but is it worth a try uninstalling it and reinstalling an older version? My current version is 5.97, oddly the version listed on the support page for the x201-3626 is 5.62, but all my Lenovo software comes from Lenovo System Update.
Thanks in advance for any and all suggestions.
Solved!
Go to Solution.

It's a new version AC related issue. Uninstall it and install previous version 5.93, manually.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Contribute connection key

What and where is the Contribute connection key?

Moved to Contribute General Discussion
From Set up site connection | Contribute
Use a connection key
Connection keys are files created by site Administrators that sets up the site connection automatically. Connection keys have the extension STC. For example, connection1.stc. A connection key includes connection information for a site, as well as the group which a user is assigned for that connection.
Please see the above document for more information.

TS1591 i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarte

i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted. Does anyone have any other suggestions?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I just bought an iPod nano 7th gen. When I connect it to my laptop, it doesn't recognize the ipod. I tried charging it, but now it won't turn on when i push the power button. Please help me! I don't want to have to return it.

I just bought an iPod nano 7th Generation. When i connect it to my laptop, it doesn't recognize the ipod. I tried charging it but when I hold the power button, nothing happens. I don't want to have to return it. Please help me!

Hi dnix257,
Welcome to the Support Communities!
What version of the Windows Operating System do you have?
What version of the iTunes software?
The troubleshooting steps below may help you with this:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Judy

I have a Mac Mini, and it won't accept connecting my Sony video camera. So I got a SD mem card reader to unload my movies from. It worked the first time I used it a few months ago. This time it says it doesn't recognize the format I am trying to use?

I have all thenecessary updates. I have switched over from a PC to Mac back in April and have nad nothing but problems adapting. I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all. And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!

Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.

I can't connect my camera to my Mac tower - final cut doesn't recognize the connection.

I have a Canon AH X1 video camera which uses the older 6 pin firewire - I have a 6 pin to 9 pin adapter, but when I connect the camera and go to Capture and Log, it doesn't recognize the camera is connected. Even when I click NOW, it does nothing. My camera output settings have been set by the manual for this type of connection, HD and downgrade OFF, or something like that (don't have the camera in front of me this moment). Any ideas?
Thank you!

Thanks for the quick response! I have a smokin' Mac Tower - 2 x 2.4 GHz Quad-Core, 10GB RAM, Mac OS 10.6.7.
I am running 6 pin firewire using a 9 pin adapter. I have one internal hard drive - 999GB, formatted Mac OS Extended (Journaled) - 914G are free.
Camera Settings - Playback STD - Comp out 1080i/480i
HD Down Conversion - OFF
When I start up Final Cut Pro, it says
External A/V Unable to locate the following external devices:
Apple FireWire NTSC (720 x 480)
Your system configuration may have changed, or your deck/camera may be disconnected or turned off.
Please check your connections and click "Check Again" , or click "Continue" to set external device detection to None.
Then, when I go to Log and Capture, I get:
Unable to initialize video deck. You may still log offline clips or use Capture Now.
Beneath that, "Initializing Device Control..." stays up and frozen.
THEN, if I click OK and Capture NOW, I get a quick flash of a screen that disappears, and nothing happens.
Thanks in advance...

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

I've got a problems with my Iphone 4, I've recently upgraded to the new software (5.1), since then the iTunes doesn't recognize my iphone, as the error comes up:' iTunes could not connect to this iPhone because an unknown error (ex8000022)

I've recently upgraded to the new software (5.1), since then the iTunes doesn't recognize my iphone, as the error comes up:' iTunes could not connect to this iPhone because an unknown error (ex8000022).
Are you guys facing the same problem?
Let me know your opinions, solutions and even problems.
Thank You !

http://support.apple.com/kb/HT4137
How to restore as new.
and this for itunes message
http://support.apple.com/kb/HT1808

I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

I cannot connect my iPhone 5 32GB IOS 6.02 to iTunes 11.01 on a Mac Book Pro. The screen freezes and doesn't recognize the iPhone at all. Thank you for your help.

Read here.
http://support.apple.com/kb/TS1591

My itunes doesn't recognize my ipod touch because I've never connected it before and it is disabled, it won't let me restore it, it says to enter a passcode in order to connect and I can't because it is disabled

My ipod touch is disabled and it says to connect to itunes to restore. I have never added the ipod to my devices on my itunes so when I connect it says that itunes doesn't recognize the device. I then put it in recovery mode and connected it to itunes and I clicked restore and it says that itunes can't connect until I put in the passcode, but I can't put in a passcode because it is disabled!!! I don't know how to fix it and it is only a month old, should I take it back?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

TS2776 when I connect my I phone to my computer, I Tunes says it doesn't recognize my device. It did just a few days ago! Help

I need help. When I connect my I phone 5 to I Tunes it doesn't load it and I get the message that It doesn't recognize this device. To unplug and try again. I have done this 5 times and always get the same message, but when I plug it in it offers the option to download my pictures. What do I do to get it to reload and Sync?

Reset the device.
Try a different cable.
Try a different USB port.
Reboot the computer.

My iPhone 3G charges with a charger, but not when connected via USB to my computer and iTunes doesn't recognize it.

Hello, my iPhone charges when I charge it with the wall plug but not when connected to a computer via USB and my iTunes doesn't recognize my iPhone either. iTunes recognizes my iPod and iPad just fine. I have been to Apple iPhone support page and I have restarted my iPhone, the computer, tried different USB ports, etc. I have also tried my iPhone on different macs even with different versions of iTunes and no luck. This all started when I was cleaning out some lint from the usb connector, could I have damaged some part of the docking connection? But why does it charge with a wall plug then?

I fixed the problem. When I was trying to clean the connector of the iPhone I must have bent some pins. I have straightened them to the best of my ability and now it syncs. If your iPhone charges, but doesn't sync, most likely you have a similar problem, because the iPhone doesn't need all of its pins to charge, but it does need all of them to sync.

Connection key doesn't recognize Contribute Installation

Similar Messages

Maybe you are looking for