Connection lost with DKU-2 USB cable for 6230

I got tired of trying to solve connectivity problems
with the bluetooth device and bought a new cable.
It seems that neither the Bluetooth or the Cable can transfer more than a few MegaBytes in one shot ("Connection to mobile phone lost").
I have upgraded to the newest 6230 firmware (05.35).
I'm Running Windows XP Home Edition SP2.
I don't think this is a PcSuite problem since this
error accurs when I use the usb drivers too.
Suggestions?
Thank you.

Hi onearmfrog
Did you let PC Suite 6.83 update over 6.82 or did you uninstall it and Nokia Connectivity Driver first? I think remnants are left behind unless it is done manually and PC Suite Cleaner is used to clean up computer first.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Can I connect TC with ethernet to USB cable?

    Can TC work as HD only by connecting to my Imac with ethernet to USB cable?

    Please confirm that you have at least two good ethernet cables, which will be needed for the installation.
    I understand that you do not need for the Time Capsule to provide a wireless network, and it will only function as a hard drive, correct?
    The step by step that we provide will allow you to backup to the Time Capsule using the current modem/router that you have now and also backup using ethernet if you connect the computer directly to the Time Capsule.
    This is what you want, correct?

  • DKU-2 Usb cable connection

    Hi all,
    Just purchased a DKU-2 usb cable for my Nokia 6230, i installed the pc suite software which came with it and then tried connecting my phone to the pc as the wizard stated, it then froze while attempting to connect the phone to the pc. I then had to restart the program and i then clicked on connect me at the bottom right and it then came up with an error message "there is no available connection type, and therefore connection to the phone cannot be established, the wizard will exit. The phone itself is still recognized as new hardware by the computer.
    Can anyone solve my problem?
    Thanks

    Hi at all,
    I have the same problem of GOWZY after installation. When I press OK on the message "failure to detect available connection type, please reinstall pc suite", another error message appear "Connection to Nokia PC suite not result. Reinstall Nokia PC suite. (code: Init IMediaControl2)". Can we help me about this problem?.
    For information my system configuration is as follow:
    Phone Nokia 6680
    Operating system:
    Microsoft Windows XP
    Creation 2600
    Service Pack 2
    Language: Italian (Standard)
    Language for programs not Unicode: Italian (Standard)
    International formulations: Italian (Standard)
    Input language: Italian (Standard)
    Nokia PC Suite:
    Build 6.81.13.0
    Language: Italian
    Connectivity Cable Drivers:
    Build 6.81.1.2
    Microsoft Outlook:
    Build 11.0
    Creation 8000
    tanks and regards.

  • How to communicate with a PC through a DKU-2 USB cable?

    Could you please give me some hints on how to send data to a PC through the DKU-2 USB cable on my Nokia 6630 phone? I suppose I will need a J2ME MIDlet application on the phone and a J2SE application on the PC to receive the output but I am a beginner with J2ME and can't figure out where to start from. Can the javax.microedition.io.Connector class be used to achieve this? Any suggestions would be greatly appreciated. Thanks in advance for your time.

    Hello Ellen,
    Welcome to Apple Discussions.
    b BOTH you AND your PC buddies
    will need to meet ALL the requirements of Ralph John's FAQ titled How do I Get Video and Audio Chats with PCs ?. This is crucial to your success. Double check everything.
    For more info, also see Ralph's
    b GREAT
    iChat Personal Web Pages. (You may want to bookmark Ralph's site as a primary iChat AV reference.) Particularly, the "... girlfriend ..." section gives specific info on setting up to video with a PC from the very beginning.

  • Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

    Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
    Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

    Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
    Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

  • I lost the USB cable for charging. Where should I buy it from?

    I lost the USB cable for my ipod shuffle and I can't charge right now. Where can I get it back or buy it from?

    Buy it from Apple.
    http://store.apple.com/us/product/MC003ZM/A?fnode=MTY1NDA0OQ
    B-rock

  • Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

    thanks

  • DKU-2 USB Cable

    Hi all,
    I have a DKU-2 USB cable I used with my lost S60 Nokia 6620 (6600 european equivalent). Is it compatible with my new S40 Nokia 6133 (6131 equivalent I think)? I am not willing to pay for the new recommended cable if it is just OK to use the old DKU-2 (even if it is slower).
    Thanks,
    JPRola
    Canada

    Thanks to both of you, Petrib and the_mik.
    I was just afraid of even trying it. Actually I do have to use it because the driver for the new cable won't even install. It complains telling that I already have another driver installed. Not true, I un-install the 2 year old PC Suite and DKU-2 driver and run a registry clean-up before attempting to install the latest PC Suite. My XP Windows installer is the version 3 something.
    And that's true, the 6133 package in Canada comes only with the phone and the charger.
    Thanks,
    jprola

  • What version of pc suite supports a dku-5 usb cabl...

    Hi,
    My problem relates to establishing a connection between my Nokia 6100 and a desktop running Windows XP Home SP 2 - 2 Go RAM and fitted with all the bells and whistles....
    Advised by an "expert", I bought a dku-5 usb cable to discover that my current pc suite version (5.1) does not support this kind of cable but on the contrary requires a serial cable (dku-2 type). I believe this is also the case for versions 5.8 and 8.5
    I found out that the installation program linked my dku-5 cable with com port #4 on my computer.
    Am I bound to buy a dku-2 cable or is there any way to establish a virtual connection between an usb port and a Com port ?
    Any help will be highly appreciated.
    Regards to all.

    25-Mar-2008 06:42 AM
    manta wrote:
    by firmware I mean imbedded software, not hardware.
    The important thing to understand is that most new Nokia phones that have a possibility to connect a cable are real USB devices, but some are not, although physically you connect the phone in PC side to USB port.
    See this list:
    http://europe.nokia.com/A4678148
    to check what cable is suitable for what phone.
    The only NOkia cable that needs a separately installed cable driver is the old DKU-5. All other NOKIA cables require you to install Nokia PC Suite and the cable drivers are included in the PC Suite package.
    There are countless non Nokia cables available at the market, some of them seem to work OK with Nokia cable drivers, but some require their own driver and some seem not to work at all.
    Hello, Manta,
    Here I am again still trying to connect my Nokia 6100 with my desktop. After a Google search about "Nokia 6100 driver update", I ended up onto a site offering a download of an updated version of Nokia PC Suite 5.8 clearly mentionning the 6100 model as being eligible for connection. I subsequently downloaded this program which is actually a .exe file.
    My problem now is : what is the proper installation sequence ? I have 2 cables available: DKU-2 and DKU-5. Should I install the .exe first ? At what point should I connect my phone and which cable should I use ? I'm afraid I cannot use the "hardware installation" option since I don't know what directory the new drivers will be written to.
    I hope you will not tell me my situation is desperate ....
    Thank you for your atttention/help.
    Regards

  • USB cable for i-pod nano 3rd generation

    I recently bought a new i-pod 3rd gen and used my USB cable for the i-pod classic 80 GB which seemed to be working fine.But after when I tried to use the original USB cable for the i-pod nano it wouldn't connect to the i-pod.
    Does anyone know whether it is OK to use the cable for the i-pod classic and why the original cable does not fit with my i-pod nano?

    can somebody help me?

  • Shorter USB cable for the Dinc 2

    Looking for a shorter length USB cable than the one that came with the phone.
    Does anyone know if they make a short length (less than 3') USB cable for the Dinc 2?
    If so where could I get one?
    Thanks again.

    You have heard of 'Tethering' witch is only available on the iPhone but not in the US (thank you AT&T). That is only for using the iPhone to connect a computer to the internet. Sorry

  • My brand new Xperia Z2 won't connect to the PC via USB cable.

    My PC is running XP 64bit OS, my old Xperia U connects fine through the same USB cable and my Xperia Z2  recognizes flash drives connected to it via the supplied adaptor cable... Any ideas guys? does the phone perhaps not like my old version of windows?

    Hi Jake, thanks for the response.I gave your suggestions a go and found that restarting the PC with the phone already connected via USB caused the phone to briefly flash up "connected to computer" in the notifications bar.This occured immediately on start-up of the PC, during motherboard Bios, and dissapeared as soon as windows began to boot up. Upon windows starting, no mention of the phone is found anywhere under "my computer", device manager or in the task bar... More on the issue...the very first time i connected the phone to the PC, the computer was already running. The phone immediately asked me if i wanted to install PC Companion 2.1. Following the installation, the connection just went and hasn't come back since. I have noticed that PC Companion will not start on my PC. I've tried re-installing it several times from Sony website but when i try to run it I just get an hourglass for 5-10 seconds, then nothing. checking back through the system requirements for Pc Companion I've noticed that it asks for every OS except mine (XP 64bit)... could this be the problem with the software not running and perhaps the phone not being recognised?

  • I have a Powerbook G4. I want to use an iMac desktop, the model that is shaped llike a lamp, as an external monitor. Can I do this with firewire or USB cable or do I have to have a different cable?

    I have a Powerbook G4. I want to use an iMac desktop, the model that is shaped llike a lamp, as an external monitor. Can I do this with firewire or USB cable or do I have to have a different cable?

    You need a network connection and a product such as ScreenRecycler. All such products require a bootable OS on the iMac.
    (58362)

  • Playbook only works with charger or USB cable despite batter showing 100% charge

    After 2 years of faithful service, playbook only works with charger or USB cable despite batter showing 100% charge. As soon as the cable/charger is unplugged, it just switches off. When cable is plugged in again, and start button pressed, it reboots. I have reinstalled sftwer from scrathc via Desktop Manager, but the problem persists. I saw this problem raised in the fora several times, but never any explanation why it happens. Any ideas?
    Solved!
    Go to Solution.

    A high resistance between battery lead and motherboard would allow trickle charge but not power discharge.
    If you want to risk it, prise off the back of the playbook using an old credit card, locate the two screws holding on the battery lead, remove, clean up, then replace.  replace back carefully as the antennae connectors are pressure pads.
    Sarah.

  • Which is better a bluetooth or usb cable for conne...

    i'm using a GPRS for my internet connection. i'd like to ask which is better a bluetooth or usb cable for connectivity? does a bluetooth or usb cable affect the performance of my connection? which one got a better data transfer rate and does not always drop a connection?

    USB is better and faster

Maybe you are looking for