Connection Mac mini with lcd 32' (daewoo sensi)

Hi
i m trying to connect a lcd daewoo 32 to a MacMini
this works with dvi/sub 15 but there is no access to zoom ,panorama or 14/9
only 4/3 and 16/9 are available
the lcd give access to these options when connected to a dvdplayer with yuv
i bought a dvi/yuv adaptator for the macmini but there is no image on the display
should i connect the mac mini with dvi/hdmi link to access
Has anyone successfully connected a lcd with these options ?
Thanks in advance

Thanks Anne for the answer
i allready downloaded this before posting , i'm not sure it helps
let me try to be more specific
the problem is to use front row on the mini with a 16/9 display (32') for films
with the dvi/yuv adaptator , it seems that the mac ( or the card) can not send this signal . Too bad , the tv with yuv connection accepts zoom , 14/9 ...
with the dvi/vga adaptator , the signal is ok on tv , at least for movies (1280x1024) , but the tv (plugged with vga ) does not give access to zoom , 14/9 so movies are "small"
not overscanned , but small
so i'm looking for somebody who plugged this successfully ( mini front row and movies in full screen ( or max available) without deformation of the image
Another option could be dvi to composite adaptator ...but going out from the mini in dvi to display on a 1366x768 LCD does not seem to be the best

Similar Messages

Using Mac mini with LCD TV

I intend to use the mac mini with a 26" HD LCD TV with a resolition of 1366 * 768. Can anyone tell me if this will give a good quality display?

I intend to use the mac mini with a 26" HD LCD TV
with a resolition of 1366 * 768. Can anyone tell me
if this will give a good quality display?
That would depend on the quality of the TV. I am using my mac mini with a Samsung 26 inch HD tv. It works fine at that resolution using the VGA connector on the TV but If I use a DVI to HDMI connection to samsung wont let me use the native resolution which is annoying. So until there is a fix for this I have to use the VGA connection.

Connecting mac mini with windows

I am trying to connect my mac mini with a windows laptop, to share a printer and some files. My mac mini works fine with my macbook, but when I try to connect to the laptop, or viceversa, I can get it to work. I am ussing the mini a the server so I want the laptop to share the printer, but I can find a way to make it work. How do I make my mini to recognize the windows laptop? I tried connecting both directly with a ethernet cable, but nothing. I will like them to work throgh my wireless network, but I do not know how. HELP!!!

Firstly, confirm both the Mac mini and the Windows laptop are in the same Windows Workgroup. The Windows Workgroup is set using the Directory Access utility (Applications > Utilities) under SMB/CIFS. Also, make sure Windows File Sharing is turned on and your Firewall is set correctly.

How to connect Mac Mini with LG 19LS4D LCD TV?

Hi all,
I just purchased my Mac Mini and tried connecting to my LG 19" HD TV using the supplied DVI to VGA adapter. When I first booted the machine "No signal" was displayed on my TV. I plugged in another 15" monitor and played around with resolutions and cable swapping and it works at 1024 x 768 at 60Hz (not ideal but better than nothing). Everytime I turn off the Mac Mini or it goes to sleep the resolution is reset and "No signal" appears again.
I have tried connecting via VNC to play around with the settings remotely but this has no effect on my TV monitor and is only resolved by the solution above or by leaving my Mac awake and not sleeping.
The documentation for the TV says that all the resolutions I have tried, and more are supported and Detect Displays under System Preferences shows these but defaults to a resolution that produces a "No signal" box.
Any ideas would be greatly welcomed.
Thanks in advance

Hi BSteely,
Thanks for the reply. To answer your questions, the LG shows on the mini as it should do i.e. there is a specific code (the LG model number) and lists the resolutions and refresh rates listed in the manual. Adobe Photoshop complains of a bad colour profile but I think that was only because when the LG is finally lit up it is as a result of me connecting the 15" monitor then hot swapping before OS X has change to realise.
When using VNC with the LG attached 1024 x 768 at 60Hz is shown but selecting that does not show the screen on the LG.
I did install SwitchResX from looking at other forums but was unable to save a usable state as the profile and resolutions were from a different monitor effectively despite my LG being connected. The P&D file that it gave back is listed in full below although I suspect this is for my 15"monitor (Excuse the length but I am unsure as to which bits are most useful).
The LG manual lists 1440 x 900 at 60Hz as the native default however the mini fails to recognise this. The easiest resolution I can get after hot swapping monitors is 1024 x 768 at 60Hz although the other day (not sure how) I did get 1280 x 1024 (at 60Hz?). The LG does not however have a DVI port. It does have HDMI so a DVI to HDMI cable could work but without buying a cable I don't know.
Here is the LG's information file:
DDC block report generated by SwitchResX version 3.8.4 for display
VGA/SVGA Display
------------------- RAW DATA ------------------------
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 09 AD 38 02 BD E7 00 00
1 | 30 0B 01 01 08 1E 18 64 E8 17 26 A0 61 58 9A 2E
2 | 27 54 39 AD CE 00 01 01 01 01 01 01 01 01 01 01
3 | 01 01 01 01 01 01 C3 1E 00 20 41 00 20 30 10 60
4 | 13 00 1E 16 00 00 00 1E 64 19 00 40 41 00 26 30
5 | 18 88 36 00 1E 16 00 00 00 18 00 00 00 FD 00 3C
6 | 4B 1F 3C 08 00 0A 20 20 20 20 20 20 00 00 00 FE
7 | 00 46 58 57 4A 31 42 30 32 35 39 33 32 35 00 66
< 00FFFFFF FFFFFF00 09AD3802 BDE70000 300B0101 081E1864 E81726A0 61589A2E 275439AD CE000101 01010101 01010101 01010101 0101C31E 00204100 20301060 13001E16 0000001E 64190040 41002630 18883600 1E160000 00180000 00FD003C 4B1F3C08 000A2020 20202020 000000FE 00465857 4A314230 32353933 32350066 >
Valid EDID block: checksum passed
------------------- MAIN EDID BLOCK -----------------
EDID Version........1.1
Manufacturer........BMM
Product Code........14338 (3802) (0238)
Serial Number.......0000E7BD
Manufactured........Week 48 of year 2001
Max H Size..........30 cm
Max V Size..........24 cm
Gamma...............2.00
Display Supported Features:
Power Management: Active off Power Management: Suspend Power Management: Standby
Display type:
RGB color display
Display is non continuous frequency
Default color space is not sRGB standard
Input signal & sync:
Analog input with: 0.700V / 0.300V
Composite Sync
Color info:
Red x = 0.625 Green x = 0.345 Blue x = 0.180 White x = 0.329
Red y = 0.380 Green y = 0.604 Blue y = 0.154 White y = 0.225
Established Timings:
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1024 x 768 @ 75.029Hz
Pixel Clock............. 78.75 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 16 pixels 1 lines
Sync Width.............. 96 pixels 3 lines
Back Porch.............. 176 pixels 28 lines
Blanking................ 288 pixels 32 lines
Total................... 1312 pixels 800 lines
Scan Rate............... 60.023 kHz 75.029 Hz
Image Size.............. 30 mm 22 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #1 is Timing definition:
Mode = 1024 x 768 @ 60.004Hz
Pixel Clock............. 65.00 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 24 pixels 3 lines
Sync Width.............. 136 pixels 6 lines
Back Porch.............. 160 pixels 29 lines
Blanking................ 320 pixels 38 lines
Total................... 1344 pixels 806 lines
Scan Rate............... 48.363 kHz 60.004 Hz
Image Size.............. 30 mm 22 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......31-60 kHz
Vertical frequency range.........60-75 Hz
Maximum bandwidth unspecified
Descriptor #3 is ASCII data:
FXWJ1B0259325

Mac mini with LCD?

My brother has just purchased this TV ... http://www.swedx.se/productinfo.php?productsid=70 ... he was asking about buying a Mac and I was wondering if he would be able to use it with this screen!?
I did try looking on the mac mini site to find any requirements for the screen but couldn't find anything... does anyone know what it needs... and if you're feeling really kind... does this TV have it!?
cheers, matt

ok cheers... he just wants it as a web browser/media hub type thing so that sounds fine... cheers for your help!
another question... what is the start up time/speed like on the mini!?
i searched it on youtube and the only video i found had a start up of over a minute which seems awful compared with my macbooks 20 seconds or so!
which model would you suggest ... the 1.66 or 1.83Ghz?!

How to connect an external HD to a 2007 Mac Mini with FireWire

I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
monoprice.com is a good place to find these cheaply and in the length you need.

Can I use my iMac with a thunderbolt connection as an Display for my new Mac Mini with thunderbolt ??

Can I use my new Mac Mini with Leopard and thunderbolt in connection with my new iMac as a display ?

If it's a 27" iMac. I don't believe Target Display Mode is supported on the 21" model. But not with a Mac Mini running Leopard. It would need to be running Lion.

HT4628 I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?

I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?

Is it the same user/iTunes account or...?
Syncing to a new computer should give you the opportunity to replace the exisiting contents with the new.

Connect an amplifier (Rotel RA 12) to the mac mini with USB plug?

Is it possible to connect the mac mini with an amplifier via usb?

Hillbille
I have a Mac Mini and a Rotel RA12. As you have found out, you can use the optical out from the 3.5 mm output jack to act as an optical input on the RA12.   This option works fairly well to give you a pretty clean sound. However, there are other options available to you.
One option is to use the headphone out as an analog signal using a tradtional 3.5 mm to RCA (split) cable, and running it to the analog inputs on the back of the RA12. This will provide sound, but not quite up to the quality you will be getting using the optical out. The reason being that the music signal is being processed by the internal DAC on the Mac instead of the better DAC in the Rotel. The other obvious reason is the quality of cable is typically not up to snuff using that route (although, you can get some high end 3.5 mm to RCA cables).
Another option would be to use USB output from the Mac Mini and hooking it up to the USB input on the front of the RA12. This is how I play music from my iPad mini through my Rotel and it works well. Again, however, you are using the DAC of the Mac equipment instead of the Rotel and are limited as to what type of fileyou can play. For example, you can't play FLAC or 24 bit 88kHz files.
A third option, as someone already mentioned, is to get a USB/SPDIF converter, then run a COAX cable to the back of the Rotel RA12. Depending on the quality of the converter, this is your BEST option for audio quality.   Using something like an M2Tech Hiface 2 converter will provide a high quality, jitter free signal between the Mac and the RA12.
Within that third option are two "sub-options" for music playback. You can use iTunes to play back the music through the USB/SPDIF converter directly, or you can use a third party application that will bypass the volume control of the MAC to give you a much purer signal. An example would be Amarra or Audirvana.
If you choose to use iTunes only, the sound will still be "okay", but you will not be able to play FLAC files or SACD ISO files.   You also won't have much control over the signal processing.   Either of thrid part applications I mentioned will give you the option to play other audiophile grade files, and give you a far better sonic experience compared to iTunes, and they can also be integrated with your iTunes library. They will also allow you to utilize Direct Integer mode, upsampling, etc ... so that you can have a 44.1kHz file upsample to 192kHz at the Rotel, or have it upsampled to 192kHz in the Mac (using the 3rd party software) before it is sent out to the Rotel. It just give you much more control over the signal.
The last option option above will give you an audiophile grade signal that will allow your Mac Mini to be used with very high end audio equipment with no comprise to the sound. It will rival the very best of CD or SACD players on the market. It also sounds incredible and you can use it in conjuction with the Apple remote app to control your music through an iPad.

Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

Are you following these instructions?
http://support.apple.com/kb/ht4796
Have yo tired by connecting both to same network vice direct ethernet connection?
There is no direct USB connection

Using the mac mini with a dial up internet connection

How do I go about using my mac mini with a dial up internet connection? I am soon to be moving to a rural area and dial up will be my only internet option. Please be very specific in your answer as I am not a very tech savvy fellow. Thank you for your help.

The last time I needed to use dial up I used this amazing device from actiontec:
http://shopping.netsuite.com/s.nl/c.ACCT122499/it.A/id.72/.f
Very hard to find one now, but it has the advantage that it connects to the ethernet ports of up to two computers, rather than using a less reliable usb connection.

I have the serial number for my mac mini but I do not have the connection cord. Is there a way I can find specs of this mac mini with just the serial number?

i have the serial number for my mac mini but I do not have the connection cord. Is there a way I can find specs of this mac mini with just the serial number?

Enter the SN here:
Apple - Support - Check Your Service and Support Coverage
Also:
How to identify Mac mini models

Mac mini -Samsung lcd TV and projector Acer

Hello,
Would someone be so kind and explain me why my Samsung tv lcd is not able to show the picture from Mac mini. If I connect Mac mini to projector it is working without problems.
Kind regards,
Tom

Yes, ofcourse... I tried with connector (dvi/vga and dvi/hdmi) both not working on Samsung and both working on projector.
Tom

Tablet with Mac mini with bluetooth?

Hi,
I was going to use an iPad with my Mac mini using blue tooth but I learnt I would have to also use a blue tooth keyboard etc to use it.
Is there any other brand of tablet that I could connect to my Mac mini with bluetooth without using another blue tooth device?

I was going to use an iPad with my Mac mini using blue tooth but I learnt I would have to also use a blue tooth keyboard etc to use it.
This makes no sense. The use of a Bluetooth keyboard has nothing to do with the iPad. You may use either a USB keyboard or a Bluetooth keyboard. Period. The iPad connects to the computer by USB for syncing and updating. But just having an iPad connected does not limit you to a Bluetooth keyboard.
Is there any other brand of tablet that I could connect to my Mac mini with bluetooth without using another blue tooth device?
What did you want to do with the tablet that needs Bluetooth connectivity? Other than backing up my apps and syncing my iTunes library, my iPad is hardly ever connected to my Mac. It gets used independently of my computer through it's Wi-Fi connection. (Yahoo Mail, Gmail, Google Calendar Sync, etc.) One of the few apps I have that connect the iPad to the Mac is to turn the iPad into a large trackpad for the Mac. That uses a Wi-Fi connection, so still no need for Bluetooth. I admit, it would be nice to sync my iTunes library over Bluetooth, similar to my Windows Mobile phone to my PC, but what do you need to do over Bluetooth?

Mac Mini with OSX server still OK?

HI All,
I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
Any ideas would be much appreciated.
Thanks,

Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
Goodluck!
Jeffrey

Connection Mac mini with lcd 32' (daewoo sensi)

Similar Messages

Maybe you are looking for