Connection Managers for N-series devices

Does anyone know of a connection manager like the Birdstep SmartConnect program that is available for say the N95 8GB? I currently have a Nokia E71 which has the Birdstep program availble from the Download! application but I wasn't able to find it on the N95 8GB.
Nokia E71-1 (254.03)
110.07.127
RM-346

It's not possible and it won't happen ! I would think there is a good chance we may get a tiny overspill from Symbian^3, but that's the best you can hope for, the N97 has neither the memory or the processor speed to perform much better. More likely that memory management may be improved in later updates and would think there will be at least another 12 months support from Nokia, but that's about it. That said, it's only my opinion , but I wouldn't hold your breath !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

SCB-68 Reference Label for M series devices

What's the difference between the SCB-68 Reference Label M series devices connector 0 and connector 1? I'm installing a NI PCI-6221-M series Multifunction DAQ and the SCB-68 connector block, and I don't know how to make the physical connections. With the SCB-68 kit, I received the Reference Label for the E-series devices. In the NI site, there is info about the connector 0, but what is the connector 0 and connector 1?
Thanks,
ZeK

Good question Zek. The M series family uses a smaller version of the 68-pin connector used on E series so that two connectors can be located on the same board. The second connector is available on certain M seriies boards in order to provide connectivity to additional channels. In the case of the 6221, there is only one connector.
The 6221 is fully compatible with the SCB-68. The following link provides a revised version of the SCB-68 label adapted for M Series devices:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/61ed77983ad7cca386256f66008215f1/$FILE/SCB68%20M%20Series%20Connector%200.pdf
For pinout specific to a particular M Series device, you can refer to the M series help available at either one of the following locations:
http://digital.ni.com/manuals.nsf/websearch/9477D6DF1FE5A72986256FAB00633DE4?OpenDocument&node=132100_US
http://digital.ni.com/manuals.nsf/websearch/3AE9D4533E03A6EF86256FE300809FE6 (HTML format)

Can any one suggest me how to use drawPixels method for 40 series devices

Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .

If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry.

Qualified Disks for px-Series Devices

Note: The following information pertains only to px-Series network devices. If you have any other StorCenter network device, including ix-Series devices, this does not apply to you.
Before adding new hard drives to your StorCenter px-Series network device, please be sure to familiarize yourself with the following information. If you still have any additional questions about this topic, feel free to post them below.
Supported Drives:
For the current list of drive brands and models that have been tested with the StorCenter px devices and are supported for use, please visit https://iomega-na-en.custhelp.com/app/answers/detail/a_id/26012. Our approved hard drive list is still growing! Please check back with the list often or subscribe for updates by clicking on the "Notify Me" button on the above link.
Important: All disks within a single storage pool must meet the following requirements:
Same manufacturer
Same rotational speed
Same capacity
Failure to meet these requirements may result in unpredictable device behavior and will not be supported by Iomega. If you need technical assistance, please be prepared to backup your data and remove any unsupported drives or configurations.
Pre-Installed Drives:
If you purchased your px device either fully or partially populated with drives, the device’s operating system resides partially on the drives. To replace all of the drives from the original configuration, follow the steps here: https://iomega-na-en.custhelp.com/app/answers/detail/a_id/27190

What model px4 do you have? Version 4.0.8.23976 is the latest LifeLine firmware release for the px2-300d and px4-300d network storage devices while Version 4.1.4.24001 is the latest for the px4-400d.
There is not any supported way to disable or restrict the services you are referring to. Debian is the operating system of the device so it would not be able to disable that unless by turning the device off.
Apache is the web interface of our devices so if you disable Apache you will not be able to access the web management console and would have to do any configuration by SSH at that point. It might be able to disable Apache if you really wanted to, but the device may just restart the service after disabling it as it is a main function of the device.
I'm not sure about OpenSSL and PHP, but if you are concerned about the Heartbleed bug, it only affects the px4-400d and px4-400r. Please see the following release from Lenovo: OpenSSL Heartbleed security vulnerability
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Maemo / MeeGo for N series devices?

Hi,
is there a chance Nokia offers an update of N series devices like the N97 to Maemo / MeeGo? I think this would offer a whole new world of software to these devices. I am pretty sure one or the other engineer has already played with this idea in his lab

It's not possible and it won't happen ! I would think there is a good chance we may get a tiny overspill from Symbian^3, but that's the best you can hope for, the N97 has neither the memory or the processor speed to perform much better. More likely that memory management may be improved in later updates and would think there will be at least another 12 months support from Nokia, but that's about it. That said, it's only my opinion , but I wouldn't hold your breath !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How to use one dynamic connection managers for multiple parallel data flow tasks

hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables.

SCB-68A Reference Label for R series

Cannot find anywhere a working pdf/lisf for SCB-68A for R series devices.
Thanks

Let's try this KnowledgeBase Article:
Where Can I Find NI SCB-68A Quick Reference Labels?
Joey S.
Software Product Manager
National Instruments

Ribbon cable for M-Series VHDCI connector

Looking for ribbon cable for NI's new M Series boards which use VHDCI
connectors. These are 68 pin connectors, 34 on each side, 0.8 mm
pitch cable.
Connectors can be obtained fom DigiKey # 787131-3 or from Honda
Connectors who carry 4 with different wire gauges (HDRA series).
Steve

Sean,
I think the SHC68-68-EP is for E series. The SHC68-68-EPM is for M
series (VHDCI connector).
I simply need a short length of bare ribbon cable so I can attach it
to my existing bare conector and bring out its digital outputs. I've
not been able to locate ribbon cable with this 0.8 mm wire spacing.
Steve
On Mon, 18 Oct 2004 17:12:29 -0500 (CDT), "Sean C."
wrote:
>National Instruments only makes 1 type of cable for M-Series devices
>(SHC68-68-EP). If you would like a ribbon cable, you will need to
>build one.

Demand Paging for E-Series

When will nokia develop new firmware with demand paging for e-series devices like e61i, e65 and e90 ? we already know that n95 has demand paging. Even n73 has it in the latest firmware. This had sped up n73 tremendously (note: n73 is older than most e-series & it does not have wifi)
so my question is :
1) is demand paging exclusive for n-series ?
2) will future versions of firmware for e-series devices have
demand paging ?
3) will there be new versions of firmware for e-series devices as
fast as nokia has developed new firmware for n-series
almost every 3-6 months for each n-series model.

Jaakko Kaidesoja
N-Gage boss: 'We're not scared of the PlayStation phone'
N73 will be one of the mobiles supporting the new n-gage platfrom
http://www.pocketgamer.co.uk/r/N-Gage/N-Gage+(next+gen+platform)/news.asp?c=5917
The N82 and both N95 handsets will be next in line for the commercial launch, but bad news N73 owners: you're going to have to wait a while.
"We promised the N73 earlier, but we found some memory issues, as it has a lower memory spec than other devices," says Kaidesoja. "That gives some headaches, but we'll deal with that, and will release for the device during the second quarter."
so clearly from here we can understand that something drastic is going to be done to the n73 yet again... to support the new n-gage platfrom and improve its performace.... why these improvements are never made to the e-series ?
PS : can anyone enlighten me on the processor specs for both n73 and e61i...
Message Edited by jananan on 02-Mar-2008 08:25 PM

Developing Blackberry connect for N-Series

Hello,
I understand that Nokia has restricted the "Blackberry connect" software to the E-devices for strategic reasons but since both N and E serries are running on the s60 platform it should be technically able to have a blackberry client run on all devices. So is there a hack out there to do that or would it be hard to develop an blackberry client for N-series or is there somthing hardware related which prevents doing this.? If it is possible is there a blackberry SDK out there for S60?
Any replies are greatly appreciated.
Cheers,
Rob

Dear development team
i absolutley agree that it makes no sense to prevent a N Series Blackberry client to be developed.
I have a, quite expensive, N82 phone and would very much appreciate to have a BlackBerry Client on it.
How long do we have to wait?

My ipad 1 for no apparent reason no longnet. Our home wireless connection is working for all other devices. Any clues?

My Ipad 1, for no apparent reason, no longer connects to the Internet. Our home wireless connection is working for all other devices.Any clues?

You can also try to reset your network settings on the iPad. Go to Setings>General>Reset>Reset Network Settings.
Good Luck!

HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

VMS 2.3 Device package for 3800 Series

hi
We are having VMS 2.3 installed which is not able to monitor or to perform any operations on 3800 series routers.
How we can add device pack for 3800 series routers ?
And from where to download the pack ?

The device pack is available for download on Cisco.com and you can get it if you have correct licence. After downloading the pack stop the cisco works deamon manager service and and apply the pack.

TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1386 My i-phone is not being recognized or appearing under "devices" in my i-tunes account when I connect it for syncing. Any suggestions n what to do??

My i-phone is not being recognized or appeadring under "devices" in my i-tunes account when I connect it for syncing and updates. Any suggestions on what I can do???

http://support.apple.com/kb/TS1538 for windows.

Connection Managers for N-series devices

Similar Messages

Maybe you are looking for