Connection message/problem?

I got a Nokia 5233 for my birthday a week and a bit ago, and I few days after I got it, I started getting this message;
"Connection Needed:
Connect to 'Internet' via 'VF AU Internet'?
Accept and set 'Use access point' to 'Automatically''
Everytime I unlocked it, this would come up;
it's been like this for about a week now, and I don't know how to get rid of it.
Help?
Solved!
Go to Solution.

Do you want Internet on your phone or not ? If YES then accept the request once.. If NO then check for Access Points settings (Refer Pg. No. 94 of User_Guide ) and if any Access Points are defined then delete one-by-one.. Reboot the phone and check...

Similar Messages

Last few days connection & messaging problem

The last couple of days I've had this problem pop up a couple of times. My phone will show full bars and 3G so no clue as to a problem but if I try to make a call it fails or if I try to send a text it will fail. I have to restart the iphone and then it will work again and I'll have a bunch of missed texts that pop up. This last time happened while it was charging and it showed that it wasn't fully charging then when I restarted it showed a full charge.
And I'm not sure if this is connected but the last couple of weeks I'll get off a call at home and notice that it says I'm on an "o" network then it goes to Edge then back to 3G.
I've had my iphone for over a year and this has never been a problem before. Any ideas? Is it related to 3.1?

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Nokia C2-00 : Connectivity , Messaging problems so...

I bought nokia c2-00 just 2 days ago (16-jul-2011). The phone looks nice. Just having 3 problems.
1. I can't edit gprs settings manually. And this phone is not receiving settings from "AIRTEL" (India) only. If I insert other operator's sim-card then ii's automatically receiving the configaration settings. But having problems with "AIRTEL"
2. During web browsing it's constantly showing "Full Memory".
3. I can't register my phone with nokia. I tried several time. Nokia is not sending me verification message to this phone.
Please help. Thanks.

I recently bought a c200 and was having problem with airtel gprs settings. I tried with manual settings but nothing worked. I restored to factory settings but the problem got more wide. Now i am unable to add manual settings aswell. It says memory full.
It's not an attitude....it's the way I am.

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Connection Message Archiver problems

Hoping someone can help.
I'm attempting to capture voicemail messages from multiple users. I need to preserve message headers and voicemail messages.
I've downloaded and installed the Unity Connection Message Archiver program from http://www.ciscounitytools.com/Applications/CxN/MessageArchiver/MessageArchiver.html
I followed all the step for configuration.
I can login and search for and select a mailbox or messages for archiving.
However, when I click the "Archive", I see the processing message, but then it reports an error.
Here is the error from the log file: "Failed establishing IMAP connection in the ConnectionMessageBackupFunctions constructor:Failed to attach to Connection server on port 7993 for IMAP login in AttachViaImap"
I've attached the full log file.
I've verified that the IMAP service is running. I've also followed all troubshooting steps found here: http://www.ciscounitytools.com/Applications/CxN/MessageArchiver/Help/MessageArchiver.htm
Can anyone point me in the right direction.
Thanks in advance.

Hi Jonathan,
I would move this thread over to the Unified Communications
Applications sub-forum as tool designer/engineer and Unity Connection
guru Lindborg will most likely have a great answer for you
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application?view=discussions
Cheers!
Rob
"May your heart always be joyful
And may your song always be sung
May you stay forever young "
- Dylan

I get message, Problem scanning. Something went wrong. Please try again.

My printer was working fine when scanning, but now I get a message:
Problem scanning. Something went wrong. Please try again. I turned my printer off, rebooted my computer...updated the printer from hp website...but nothing. I can see the document in preview, and I hear the scanner working. HELP!!

Hey there @leandermw , Welcome to the HP Forums
I understand you're having scanning problem with your Deskjet 2540, on Windows 8.1 and would like to help you.
I would first suggest that you run the Print and Scan Doctor, and choose "fix scanning" to see if the tool can correct the issue. Send me the results in your reply as well.
If you have the printer connected to a network, either wireless or ethernet, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try scanning.
You can also power reset the printer itself:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Try scanning from the HP scan software on your computer, and also make a copy from the front of the printer.
Write me back with the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Internet Connection Message at startup and various moments of the day

I started out using a dial-up connection, then later upgraded to ethernet. Now, everytime I start up my iMac I get a Internet Connection message. Here's what it says, The selected communications device does not exist. Please verify your settings and try again. I click ok and my wirless still works. Then, later during my session I get the message again. Any thoughts on how to get rid of this message? Thanks in advance.
p.s. is this the right place for this question?
Thanks,
mdawg

Yes, this is the right place for such a question.
The issue with your problem is working out specifically which 'communications device' the Mac is complaining about. It's presumably the modem, but that's not necessarily the case.
The first place to look would be in System Preferences -> Network.
What network ports are enabled there? If the modem is still listed and is the preferred connection (it's at the top), then the Mac is going to try to use the modem and fall-back to the ethernet network if the modem fails.
If that is the case the solution is simple - just use the Show popup menu in Network Preferences to select Network Port Configurations. Here you can enable and disable different ports, as well as change their priority (by dragging them up/down).
Either drag the ethernet port to the top of the list or, if you never expect to go back to the modem, disable the modem option.

Wi fi not connected message

My ipad 2 wi fi is not working, I get a Not Connected message. Has anyone had this problem? if so what is the solution to be able to reconnect.
Thanks

Bghawes-
I suggest you unplug your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will then need to re-connect the iPad to WiFi.
Fred

I get an untrusted connection message when trying to connect to gmail

Every time I try to navigate to gmail in Firefox, I get an untrusted connection message. There is no option to bypass the screen and I can get to gmail without any trouble in Chrome.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

!MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.jface".

Hi experts,
when in Design Studio, I have selected, Tools, Preferences and then Backend Conections, appears this problem with eclipse,
What happend?,
Thanks in advance,
!ENTRY org.eclipse.jface 4 2 2014-05-27 12:37:08.751
!MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.jface".
!STACK 0
java.lang.NullPointerException
at com.sap.ip.bi.zen.connectivity.ConnectivityPlugin.getRouterDescription(ConnectivityPlugin.java:68)
at com.sap.ip.bi.zen.ui.internal.preferences.SapLogonLabelProvider.getColumnText(SapLogonLabelProvider.java:24)
at org.eclipse.jface.viewers.TableColumnViewerLabelProvider.update(TableColumnViewerLabelProvider.java:70)
at org.eclipse.jface.viewers.ViewerColumn.refresh(ViewerColumn.java:152)
at org.eclipse.jface.viewers.AbstractTableViewer.doUpdateItem(AbstractTableViewer.java:400)
at org.eclipse.jface.viewers.StructuredViewer$UpdateItemSafeRunnable.run(StructuredViewer.java:485)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:49)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.viewers.StructuredViewer.updateItem(StructuredViewer.java:2167)
at org.eclipse.jface.viewers.AbstractTableViewer.createItem(AbstractTableViewer.java:278)
at org.eclipse.jface.viewers.AbstractTableViewer.internalRefreshAll(AbstractTableViewer.java:758)
at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:650)
at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:637)
at org.eclipse.jface.viewers.AbstractTableViewer$2.run(AbstractTableViewer.java:593)
at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1443)
at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1404)
at org.eclipse.jface.viewers.AbstractTableViewer.inputChanged(AbstractTableViewer.java:591)
at org.eclipse.jface.viewers.ContentViewer.setInput(ContentViewer.java:280)
at org.eclipse.jface.viewers.StructuredViewer.setInput(StructuredViewer.java:1690)
at com.sap.ip.bi.zen.ui.internal.LocalUihandler.createUiForBWConnectionsFromSapLogon(LocalUihandler.java:162)
at com.sap.ip.bi.zen.ui.internal.LocalUihandler.createUiForPreferencePageBackendSystems(LocalUihandler.java:119)
at com.sap.ip.bi.zen.ui.internal.preferences.PreferencePageBackendSystems.createContents(PreferencePageBackendSystems.java:88)
at org.eclipse.jface.preference.PreferencePage.createControl(PreferencePage.java:232)
at org.eclipse.jface.preference.PreferenceDialog.createPageControl(PreferenceDialog.java:1502)
at org.eclipse.jface.preference.PreferenceDialog$14.run(PreferenceDialog.java:1259)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:49)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.preference.PreferenceDialog.showPage(PreferenceDialog.java:1253)
at org.eclipse.ui.internal.dialogs.FilteredPreferenceDialog.showPage(FilteredPreferenceDialog.java:675)
at org.eclipse.jface.preference.PreferenceDialog$10.run(PreferenceDialog.java:709)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.preference.PreferenceDialog$9.selectionChanged(PreferenceDialog.java:705)
at org.eclipse.jface.viewers.StructuredViewer$3.run(StructuredViewer.java:888)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:49)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.viewers.StructuredViewer.firePostSelectionChanged(StructuredViewer.java:886)
at org.eclipse.jface.viewers.StructuredViewer.setSelection(StructuredViewer.java:1726)
at org.eclipse.jface.viewers.TreeViewer.setSelection(TreeViewer.java:1139)
at org.eclipse.jface.preference.PreferenceDialog.selectSavedItem(PreferenceDialog.java:1055)
at org.eclipse.ui.internal.dialogs.FilteredPreferenceDialog.selectSavedItem(FilteredPreferenceDialog.java:730)
at org.eclipse.jface.preference.PreferenceDialog$4.run(PreferenceDialog.java:376)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.preference.PreferenceDialog.createContents(PreferenceDialog.java:372)
at org.eclipse.jface.window.Window.create(Window.java:432)
at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1104)
at org.eclipse.ui.internal.dialogs.WorkbenchPreferenceDialog.createDialogOn(WorkbenchPreferenceDialog.java:102)
at org.eclipse.ui.dialogs.PreferencesUtil.createPreferenceDialogOn(PreferencesUtil.java:192)
at org.eclipse.ui.dialogs.PreferencesUtil.createPreferenceDialogOn(PreferencesUtil.java:116)
at org.eclipse.ui.internal.handlers.ShowPreferencePageHandler.execute(ShowPreferencePageHandler.java:57)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290)
at org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56)
at org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243)
at org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224)
at org.eclipse.e4.core.contexts.ContextInjectionFactory.invoke(ContextInjectionFactory.java:132)
at org.eclipse.e4.core.commands.internal.HandlerServiceHandler.execute(HandlerServiceHandler.java:167)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:499)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508)
at org.eclipse.e4.core.commands.internal.HandlerServiceImpl.executeHandler(HandlerServiceImpl.java:213)
at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem.executeItem(HandledContributionItem.java:850)
at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem.handleWidgetSelection(HandledContributionItem.java:743)
at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem.access$7(HandledContributionItem.java:727)
at org.eclipse.e4.ui.workbench.renderers.swt.HandledContributionItem$4.handleEvent(HandledContributionItem.java:662)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$9.run(PartRenderingEngine.java:1113)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:997)
at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:138)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:610)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:567)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:150)
at com.sap.ip.bi.zen.ui.internal.application.ZenApplication.start(ZenApplication.java:36)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:354)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:181)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:636)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:591)
at org.eclipse.equinox.launcher.Main.run(Main.java:1450)

I just tried it on my machine; no issues in Local mode
I recommend opening a ticket/incident with SAP Support to better troubleshoot what the issue might be.
Be sure you installed the support pack with 1.2 and not the new install

Getting "refused connection" message; can't video or audio chat

I have searched and read posts on this forum but I am somewhat at a loss, perhaps due to my lack of sophistication on these issues. Here are the facts:
My son is living in Belgium this summer, and we had hoped to iChat with him using audio and video. He has a 15" PowerBook G4 running 10.4.6 and iChat 3.14, and an external iSight.
This computer, behind an AirPort Express Base Station, worked well all year for video iChatting at college (USA).
He now has the same computer (firewall off), the same AirPort Express Base Station in his Belgian apartment. The apartment is connected via a Prestige 841 DSL modem (I believe this is a Zyxel unit).
We get the "the user refused the connection" message when audio or video chat is attempted. We are able to chat text-only. Also, Skype works (wasn't installed until after these problems were noted).
At my end I have a MacBook Pro running 10.4.6, built-in iSight camera, iChat 3.1.4, behind an AirPort Extreme. I am able to video and audio chat with other people behind this configuration.
Also my son can't audio or video chat with iChat with other users, so clearly the problem is at his end.
I had him change the port that iChat works on from 5190 to 443 but that didn't help. QuickTime streaming speed has been adjusted on both his computer and mine.
It appears that the prestige 841 is not actually a router but just a dsl modem, so I don't think there is any port issue with that unit. The airport express isn't doing any port forwarding, to my knowledge, at his end, but I admit to being a bit confused.
I tried looking at the Ralph Johns' ichat pages but I couldn't figure much out from them, especially since I in am the USA and my son's machines are in Belgium. Hopefully I have provided enough information to get a step-by-step solution from the local genuises here - please?
Thanks for any help.

Hi Andrew,
I can not see the 841 listed on this site.
http://portforward.com/routers.htm
This may be that it does not Route or it could mean it is recently new and not on the list yet.
However we can find out by doing a few things.
If you go to System Preference > Network.
There are two drop downs near the top.
Choose the Airport option in the second drop down.
Now click the TCP/IP tab
It should then look like the Pic Molly and I have been swopping in this thread http://discussions.apple.com/thread.jspa?messageID=2531947#2531947
(your IP as 10.0.1.xxx and the "router" being 10.0.1.1 fro the Airport)
An Airport device does not do Port Forwarding as such.
in it's default mode is does NAT everything. This means it does point all data to a specific IP from one side (modem or ISP if modem is in Bridge) to the other (LAN = Computers).
This can mean problems if the modem does route and is DOING DHCP.
IF he takes the Airport out of the connection set up and connects direct to the modem does it work ?
Get him to repeat the above in System Preferences > Network.
This time he will have to select Built-in Ethernet from the drop down.
We will need to know the IP that now shows up. Refere to the thread I linked you to and the posts to Molly about how to tel if the modem is in Bridge from the IP numbers he gets.
There are test accounts and real live testers listed in the 3 tables on this page
http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html
Which ones can you get to and can your son when connected direct to the modem ?
IF the Modem is routing then it will be simply a question of turning DHCP Off in the Airport and making it a Wireless Access point.
Go to Applications/Utilities
Open Airport Admin Utility.
Log on to the Airport in the first window.
Then go to the Network tab in the main window.
Deselect Distributing Addresses (This is the Airport's DHCP)
If you repeat the System Preferences > Network > > TCP/IP tab thing you should now see the same or at least similar IPs as when connected directly to the modem
Keep the Quicktime setting to match the download speed.
As it is a Zyxel keep the port at 443.
Also get him to Check if his MAc Firewall is On
( System Prefereces > Sharing > Firewall tab)
Also check the Advanced Button here and theat it is Not set set to "BLock ALl UDP Traffic"
1:47 PM Wednesday; June 14, 2006

10.5.2 failed to fix wireless connection dropping problem

10.5.2 did not fix wireless connection dropping problem. I lose wireless connection whenever my MBP restarts or wake up from sleep in the building where I am and have to retype password about 10 times a day. I had not had this problem when I used Tiger. Everyone who has upgraded to Leopard or has it installed on their Mac is experiencing the same problem. Is there any solution or trick to resolve this problem? Thank you.
Message was edited by: FrenchQuarter
Message was edited by: FrenchQuarter

Amularya,
Please read the post I made in this thread earlier. No less than a dozen solutions are offered in the link I provided for wireless issues. Troubleshooting wireless issues requires individual attention because of the plethora of issues which can't be tested for. So please start a new topic thread here:
http://discussions.apple.com/forum.jspa?forumID=1225&start=0
So you can get a wider audience, and won't confuse the original poster with solutions that don't apply to them.
There literally hundreds of different WiFi adapters.
Dozens of different virus and firewall combinations.
Possibilities for damaged WiFi cards and routers, as well as routers whose firmware is not to spec with the latest wireless standard.
To top it off, bad RAM, hard disk being too full, and bad preference, cache or or logfiles can make various aspects of the operating system misbehave, and/or even the directory leading to those files.
Until each person starts their own thread looking for solution individually, chances are they won't find one. Yes, 10.5.2 addresses WiFi for some people. Obviously it doesn't for everyone. The point is, there are some people, like myself who have never had a WiFi issue either with Intel or PowerPC Macs that they couldn't resolve without a little bit of troubleshooting. I'm happy to help you walk through it, but only if you start your own thread asking for help.

Picture messaging problems for EnV 3

In the past few days, I have been having picture messaging problems. When a Non-Verizon person sends me a picture, it says connecting (as it should) but just continues to say connecting. I never receive the picture. It just says failed if I let it continue to connect. When I receive a picture message from a Verizon person, it also says connecting and I allow it to go until it stops. It never shows a loading bar like it used to but the "connecting" screen will eventually disappear and I can view the picture. It works but, its very slow and it doesn't show the loading bar like it used to.
I also have problems sending picture messages. Again, the connecting screen comes up when sending a picture but no loading bar. I usually let it go for 30 seconds and I'll end up cancelling it. BUT, a friend of mine did end up receiving the picture even though it never said message sent on my phone.
Any help with these problems? I haven't done anything different than I used to and I have had the phone for almost a year and a half now. Everything has been fine until now.

Yay!! It's so nice when it's a simple fix!
You can do the *228 reset every month or so just for maintenance and to keep your phone updated.

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

BT Home hub not connected message

We use my wife's XP sp3 laptop wirelessly at home, but when we use it away from home on a 'paid for' wireless providers network (as no BTFon is avaliable at that location), we occasionally get the BT Home hub not connected message come up in an IE page. How can it be turned off, there is no solution in BT FAQs?
Regards
Solved!
Go to Solution.

Just for good measure, I would install another web browser while you still have internet access. Then if you have the same problem, try the other web browser and see if that works.
I noticed that you said it says that the Hub is switched off. This is the message that appears when there is no internet connection at all.
Maybe the WiFi had dropped and there was no signal for a small period of time, then when it went to go to the 'page cannot be displayed' screen it redirected you to the 'hub is switched off' message because it had been cached previously.

Connection message/problem?

Similar Messages

Maybe you are looking for