"connection not available" message on E71

My Nokia E71 stopped connecting to the internet on 5th of this month and talks have been on with my operator. My phone is able to connect to the internet using another service. I just thought of resetting the phone with a hope that everything can work fine. After I restored the phone, I am getting a message “connection not available”. I have the settings from the operator and I saved them. But still when I try to connect to the internet it’s giving the same message “connection not available”. What could be the fault and what can I do to it? Thank you.

Frankly to say, i do not have much knowledge on the stuff relating to the phone. But, will provide the information what all i can basing on your questions.
My phone is approximately 6 months old.
I am on the firmware 500.21.009
Whenever i open my browser it asks me how i want to connect to the internet. There are three access points. So, may be there is no default access point set.
My carrier is vodafone.
I have never used wi-fi on my mobile.
Data plan is activated on my mobile.
Thank you.

Similar Messages

  • Secure Connection not Available E71

    Hi,
    I have nokia E71
     When clicking to local SharePoint site, I get:
    Web: Secure connection not available    :robotsad:
    Thanks

    I am getting this error on N97 mini. Can some one help me to get rid of this?
    Thanks,
    Gopichand Pai

  • "NOT AVAILABLE" Message keeps popping up on tv

    Hello!
    I have had my television for about two years not, and the past year, the "NOT  AVAILABLE" message has been popping up.  At first not so much, but now more often than not.  The message become quite annoying as it stays displayed on the screen while watching tv.  It also disables the remote control.  How can this be fixed?
    Thanks
    Liss

    I found how to fix it myself.
    In my case, something was wrong with the signal comes from the button control on the left side of the TV.
    ========================
    What I did
    ========================
    unplug the power cord.
    Remove back cover.
    Look into the motherboard ( biggest green at the center).
    First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
    I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.
    I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
    I then disconnect the nearby connector that comes from the side control buttons.
    Turn on the TV by remote, press menu button on the remote to check. The menu stays.
    DONE.
    I use electric tape to seal off the connector and let it hanging there.
    Close the TV back panel
    I have been watching TV for 3 nights without menus/channels scrolling.
    NOT AVAILABLE red message when watching DVD is no longer existed.
    Hope this help someone else.

  • N95 - connection not available help!

    can anyone help??
    i have updated to the new firmware and if i try to connect via wireless network or mobile internet i get the message "connection not available"
    i tried to download the settings from nokia and when the text arrives it says unknown message format - cannot open
    any ideas anyone?
    im on o2 contract

    Use the settings wizard located in the tools folder and it will setup your O2 GPRS connections for you amongst other things.
    Useful links: Phone firmware update | Nokia support site

  • N97 Locked or unlocked? msg "connection not availa...

    I have just purchased a N97. Sold as "Unlocked" but when I put in my sim card and try to use the phone the message "Connection not available" appears. I have contacted the seller and they assure me the phone is unlocked. Is there a way to find out if it is locked or am I doing something wrong? When my sim card is inserted, the phone shows the network tag when in service area but the "Connection not available" still appears. I have been advised to "Cold start" which I have done a couple of times but still no good.

    Calling your vendor in Sydney is likely the best and only way to go. Most of us buy an iPhone and then use it in the country where we bought it. Buying one in Australia and taking it to Thailand to use is unusual to put it mildly. Few if any will have relevant experience.
    Good luck to you
    Phil

  • Each time i order a book, it says "network connection not available". Any tips to troubleshoot?

    Each time I try to order a book, it says "network connection not available". Any tips to troubleshoot?

    As the error message says, you computer cannot connect to the network.
    It is difficult for us to give advice since we do not know your network setup. Try the network diagnostics utility:
         Open System Preferences -> Network ;
    At the bottom of the window is a button labelled "Assist me", press it, then in the drop down panel press "Diagnostics" and inspect your network status.

  • I am getting a Mobile Network Not Available message when trying to make phone calls

    I am getting a Mobile Network Not Available message after phone was drained for a few days. Texting works, internet works, I just cannot make calls.

    Statosphere II
    I've reset most everything, taken out battery/replaced, also set up roaming (all)
    Can't check voicemail either
    Thank you!

  • EDI: Partner profile inbound not available Message no. E0337

    Hi Friends,
    I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
    EDI: Partner profile inbound not available
    Message no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /0040000010/LI/VN/INVOIC/MM///
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
    When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
    None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
    Please let me know your thoughts, what could be possible reason and a solution.
    Thanks
    Deepak

    Hi Deepak,
    I am facing the same problem with a different message type.
    But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
    Have you found the reason for this?
    Thanks,
    Florian

  • "connection not available error code - 4161" what...

    Hi
    I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
    Thanks

    I did a comparison, and your connection string is different
    than mine. Mine does not show any password/userid entries, but
    perhaps that's the difference between using SQL and SQL Express.
    (I'm using SQL.) I am, of course, assuming that you have actual
    values for "servername," "database," etc.
    Given that you can't get in from RSC Explorer, it would seem
    that either you are not using the same userid/password as the one
    you set up for the administrator when you created the DB, or else
    there's something wrong with the DB itself.
    Try creating a test DB. Be careful to specify the same
    administrator name and password as the login you use to get on the
    RSC server. After you've created the test DB, open it up from RSC
    Explorer. If you can do this successfully, then everything ought to
    be working OK. From that point, I'd start over and create a new DB,
    and upload to that one. (In fact, I've actually gone through
    exactly that total exercise before.
    G

  • N80 IE always gives "Connection not available"

    Hello!
    I have a Nokia N80 IE with latest software (V 5.0719.0.2).
    I used to be always able connect to the internet with it through GPRS and WLAN. I have the browser settings set to "Always ask" for "Access point" settings.
    These days, something went wrong with my mobile; each time I start the browser and request a page, I get "Connection to server needed. Connect?", and as soon as I press yes, I get "Connecting" and then instantaneously, I get "Connection not available" as if the device never bothered to do a thing. it doesn't give me a GPRS connection nor an option to find WLAN networks.
    I have Gmail applicaiton installed, and when this problem started, the Gmail application also has the same behaviour when connection to the internet
    PLZZ HELP!

    delete the access points, & redo what you did before in establizing connections! other access points most likely are interffering, using the same channel.
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Connection Not Available! [NOKIA E63]

    i am using NOKIA E63.
    I have just update My Software(Firmware) using NOKIA SUITE just tommorow.
    but now i couldn't Access internet using my NOKIA E63 Mobile.
    i have following error when i brows any website in Defaoult browser comes with NOKIA E63.
    Error:Connection Not Available!   
    Pelase help!!!! (SOS)

    Have you check your access point settings? You may need to setup your access points again. Also check the internet settings in the browser to make sure it is pointing towards a working access point.

  • CIMC on C210 server throws Error 2001: Service not available message

    I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available"  message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
    Thanks in advance!
    Jess

    I got it working on one of the servers, and havent tried the same solutions on any other server.
    What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
    I'm not sure if it will work on the rest of the servers, but it's worth a try
    Regards
    Alex

  • In App Purchase showing "Service Not available" Message box with error code 805a01f4

    Hi all ,
            I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
    in a bit . This error code may be helpful : 805a01f4 ." 
    Please tell me how to resolve .
    Thank you

    Thanks for your response .
    I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After  few seconds got a message on my number that "Dear customer,
    thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ? 

  • I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

    I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

    Welcome to the Apple Community Michael.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Why do people using other brands of smart phones get a "not available" message when they try to view vids that I made on my iPhone 4s?

    I made a video on my iPhone 4S and e-mailed to another party to view. The other party told me he could not view it. He said he got a "not available" message when trying to view it. Next I sent the video to him in a text message. He had the same problem again.

    I have the same exact problem. let me know if you figured anything out

Maybe you are looking for

  • How do I create a new window for the iTunes store?

    Hi, I have the latest iTunes update on a Windows PC, but I can't seem to open any new windows for the iStore like you used to be able to, so you have to come out of your iTunes library (annoying if you want to check that you haven't already purchased

  • Invoking presentation method from a screenflow

    i am using ALBPM object presentation which shows some images one by one on pressing 'Next' button.but when all the images are shown(stored in a predefined directory), i want to set the visibility of the image component false and show a warning in a t

  • White screen when I turn on the computer

    My Macbook Pro would not let me click on anything so I restarted my computer by holding down the power button, but then it stayed at a white screen for awhile, then turned to a blue screen before my login screen poped up. It let me log in but then wo

  • How to insert chinese data into MS SQL Server 2000 through JDBC

    I am trying to insert chinese data into MS SQL server 2000 using JDBC. how to do this? can anybody help me. thanx.

  • Leopard long file name windows support

    I have a Windows 2003 file server and Leopard client 10.5.5 build 9F33. One leopard client is able to see more than 27 caracteres file name and others are not able to see more than 27 caracteres on NTFS partitions. Any Idea how to setup all Leopard c