Connection not recognized by computer after 15 minutes

How do I change settings so that I don't have to go through the continuous process of turning the wireless device off and then back on again in order to continue with a connection that my computer recognizes? The connection must go into a state of dormancy after a short period of inactivity and the startup process is combersome and lengthly.

Hi Nick,
I expect that the connection would go dormant but the reconnect never occurs through my computer. I always need to turn the modem off and then on to the point of alternating green and red flashing (modem) before trying to reconnect by way of my computer; my computer then will go through a diagnosis of the bad connection and finally reconnect. That appears to be the only process whereby I can achieve any connection at all. The process takes 5 or more minutes at the "Blazing" speed that I'm running at. This inconvenience is getting old real fast to the point where I'm considering another internet option.
Barrie

Similar Messages

  • Ipod Nano not recognized by computer (or itunes) but charging.. so connected

    worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
    connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
    can't find it looking in Explorer
    but, it is charging so... it is connected
    have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
    would that make any difference?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • Charging icon appears but not recognized by computer  help!!!

    Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
    Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
    What's going on???
    HELP!!!!

    Have you tried a different cable?
    This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
    Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
    MJ

  • Curve not recognized by computer

    hello, i baught a blackberry curve on ebay (big mistake!) it functions as phone, but is not recognized by computer. when i plug it in via USB it connects for a second and then stops, i.e. synchronization is not possible.
    i reset the device, reinstalled the DM software, spent hours trying to solve this issue nothing works - any help?
    btw, under 'manage connecetions', USB does not appear at all.
    thank you so much for any input

    prior to doing anything, you need to install the USB drivers.
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
    after you have checked everything is okay, you can do the next step, that is install the Desktop Manager.
    Moreover, ou can wipe your device so that there is no remains from the previous owner.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • IPOD Shuffle not recognized by computer, and caused a  USB power surge

    Device is not recognized by computer, and I tried the listed support recommendations.
    The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

    Hi JBR,
    Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
    Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
    After that, open itunes and life should be good.
    Hope this helps!

  • My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Ipod touch not recognized by computer or ITunes

    Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Ipod not recognized by computer or self

    Ipod touch shows the apple screen but will not start, I did the hold power button then hold home button etc didnt work. the apple does stay on screen and flashes here and there but still no changes. Also, is not recognized on computer.  Help??

    sounds like a currupted iPod if its stuck like that or you Jailbreaked it.

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

    Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
    I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

    My new iPhone 6 paired perfectly with my Mercedes system.  That said, on your iPhone 5, reset your network settings and then try to pair it again.

  • My iphone 4s is stuck on connect to itunes, is not recognized by computer or itunes

    my iphone is stuck on the "connect to itunes" loading screen, and when it's plugged into my computer, itunes and the computer are not able to recognize it. when it is plugged in, it gets a "USB device not recognized" and in device manager, it shows up as an "unknown device". I have read and tried everything in http://support.apple.com/kb/TS1538, as well as uninstalling and re-installing itunes and all it's components several times, but nothing has helped. Please help!!!

    The iPhone has gone into recovery mode and you have to restore by connecting to a computer with iTunes and follow the instructions in http://support.apple.com/kb/HT1808.  If you do not have a computer with iTunes, a friend with a computer with iTunes, can you get to an Apple store genius bar and see if the techs will restore for you?

  • After upgrading to 8.1 in windows, my ipod is not recognized in computer or itunes

    I upgraded to Windows 8.1 a while back, and just tried to synch my ipod with itunes and now my ipod is not being recognized in my comuper or itunes. Does anyone know why this is and/or how to fix it?
    Thanks!!
    Amber

    Hello Amber,
    I would be concerned too if my iPod was not recognized by iTunes.  I found a couple of articles that might help with this.
    If you don't see your iPod in the My Computer or Computer section of Windows, follow the steps in this article:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    If Windows recognizes your iPod but iTunes does not, follow the steps in this article:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • IPhone 5 will not boot up past startup screen after attempted update to iOS 8. Not recognized by computer.

    Like everyone else today, I attempted to make the move to iOS 8, using my Mac's iTunes. All was running smoothly, the progress bar was nearing the end when I received the error that "the iPhone software update server could not be contacted." With a now useless phone, I restarted it, hoping for the best as I could do nothing. I am now stuck with a phone which will turn on to the white startup screen and black Apple Logo, then instantly shut down, leaving me to repeat the process. If I hold down the home button, I can enter what seems to be "Recovery Mode," with a red iTunes Logo, as opposed to the usual blue. From here, all internet sources I have found suggest that I should restore the phone, but that's really where I hit the problem. When I plug the phone in, when in Recovery Mode, I simply receive the "iPhone software update server could not be contacted" error again, leaving the phone not recognized by iTunes. In non-recovery mode, the phone appears to simply turn off so fast that iTunes has no time to find it.
    Any one with similar problems or solutions?

    This what happened to my iPhone 5 after I updated to iOS 8.0;
    The update process was done smootly without problems thru
    Over the Air.
    Now when I cold start/boot my iPhone 5, my apple logo appears as it was
    in iOS 7, but after 30 seconds or so, my Apple Logo dissappears the
    screen goes black for 5-6 seconds, but then viola! I am at the Log-On
    screen... Then I start using my iPhone.
    Just like Chris above, I have done 10 reboots, (complete shut down and
    restart), its always the same...
    Other than this, my iPhone works just fine. I will not re-install the iOS.
    From my past experience, re-installing the iOS does not change
    these minor differences...

  • Iphone 4 is not recognized by computer anymore. I've tried everything and it still wont connect. What can I do?

    My phone stopped syncing a couple of months ago, but ive used the computer to charge it. Last time i used the computer to charge it was 2 weeks ago. This past week i tried to use the computer to sync it with the new IOS5, but now the computer doesnt even recognize it. Ive tried to re-install itunes, use a different cord and different computers. But it is still not recognized. I dont know what else to do. Please help

    If you're running on a Windows machine, here's the troubleshooting guide:
    http://support.apple.com/kb/TS1538
    There are many things to inspect there.  Try them all as indicated.

  • TS1363 iPhone (4S) not recognized by computer (PC, Windows 7).  Previously connected and able to sync.

    Seeking help to sync iPhone with Windows 7.  Previously able to do this with mophy.  Need help identifying and correcting problem.

    Hello Crystal,
    The following article contains useful information and helpful steps that can help get iTunes and your iPhone back on good terms again.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

Maybe you are looking for

  • ITunes Stream Stuttering and Crackling Noises (Temporary Work Around Option

    Note: If you don’t take the time from your busy schedule to address these suggestions being provided in this and future upcoming series, then by all mean continue with what you were doing before and continue to experience the frustrations and problem

  • Upgrading from OS 8.1 to 9.1 on a PB 2400

    My PB 2400c running OS 8.1 has some problems Techtool can't fix. Is it possible to upgrade directly to 9.1 by copying the installer files from a 9.1 CD to the PB, booting off the PB's Disk Tools diskette, and running the installer? Do I need to first

  • Document finder Customizing information

    I need some information about document finder customizing. I have already read .. http://help.sap.com/saphelp_nw04/helpdata/en/83/ca943a25aa8623e10000000a114084/content.htm .. but it is not working. Thanks very much in advance.

  • Xml images look pixelated =/

    Hi, I made a site for a friend that uses an xml gallery. If you click the "view portfolio" planet, you will see that the loaded thumbnail images and the full images are pixelly. However, they look fine in the stand-alone swf. I though it might have s

  • JDI/DC approach for WebDynpro examples

    Hi , Can someone send me URL for WebDynpro examples using DC approach? and if I have DTR in my portal, is there anyhting else to check form the licence side to go ahead for the NWDI approach?