Connection Object Delta Load not happening

Hi Gurus,
I am doing integration between ISU and CRM 5.0. I have achieved integration both sides for BP , Contract Account. I have also done initial load for Connection Objects using object 'SI_CONNOBJ'. We are able to see IBase getting created for the Connection Objects but when I change the data in a particular Connection Object it is not trigerring Delta Load for the Object.
Please help me for the same.

Hi Aishuman,,
Please check for the following entry in R/3 table TBE31:
EVENT    IBSSICON
LAND
APPLK    BC-MID
FUNCT    ECRM_CONTRACT_COLLECT_DATA
which brings the delta change to CRM.
Also,in CRM txn:R3AC1,check for the filter setting for object SI_CONNOBJ.
Also,in R/3 table CRMRFCPAR ,make sure that for object SI_CONNOBJ(or *) for consumser CRM(or *),value of DISCARDDAT is not set to X.If set to X,would prevent delta change to flow to CRM.
Also,check for the queue registration in txn:SMQR.If your queue is de-registered or lock is set,then entry will not be processed in CRM.
Hope this helps!
Regards,
Shanthala Kudva.

Similar Messages

Contract Account delta load not happening

Hi Gurus,
I am doing integration between ISU and CRM 7.0. I have achieved integration both sides for BP . I have also done initial load for Contract Accounts using object 'BAUG_MAIN'. We are able to see Business Agreement getting created for the Business Partner in CRM but when I change the data in a particular Contract Account in ISU or create a new Contract account after the initial load it is not trigerring Delta Load for the Object.
Please help me for the same.
Regards,
Nasreen

Hello Nasreen,
A possible reason for this issue could be that no module is assigned to the event 1030 in FQEVENTS. If you want to report FKKVK changes to BW (i.e. update the DataSource 0CACONT_ACC_ATTR_2) then the module FKK_EVENT_1030 should be activated here. The similar is valid for changes of FKKVKP table (= DataSource 0UC_ACCNTBP_ATTR_2) -> activate
the module ISU_EVENT_1030.
I hope this is helpful for you.
Kind Regards
Olivia

Errors occurred during extraction of UD Connect object field- table not fou

Hi,
In BI 7.0 system I can't select any UD Connect source object on the "Extraction" tab page of the DataSource maitenance screen. If I type the table name (which is "UDITEST") into it and then hit the "Proposal" tab page, I get the following error:
Errors occurred during extraction of UD Connect object field-list: Errors occurred during extraction of UD Connect object field-list: UDCADAPTERROR::RSSDK|200|Table: uditest not found|
Message no. RSDS_ACCESS036
Analysis:
1) We have tested the BI JDBC Connector using the URL:
http://xxxabcdev03:50000/TestJDBC_Web/TestJDBCPage.jsp
We got the list of tables displayed (UDITEST table is also displayed)=> connector is configured properly.
2) When we are trying to configure the Source system in rsa1->modelling->source systems-> UD connect -> create,
a) RFC Destination: We are using an RFC Connection that is already in place of type 'T' between the J2EE engine and BI ABAP engine. We tested this connection from SM59 -> TCP/IP connections and it is working fine.
How do we test whether the RFC between J2EE engine and BI ABAP engine is a 2 way RFC connection?
b) Logical System Name: We have manually typed in free text 'UDC_local'. Could you please clarify do we need to type in manually or select the logical system name from the F4 help?
Which logical system name should we enter here exactly.. pls clarify.
Do we have a seperate logical system name for the J2EE server...?
c) Type of Connector : JDBC
d) name of connector: SDK_JDBC
e) Source system name: SDK_JDBC
f) Type and Release : blank
Thanks to any answers in advance!
Best regards,
Syam

Hi,
Tried to give the Logical System Name in uppercase ie: UDC_LOCAL.
Now, when I click on the F4 of 'UD Connect Source Object' in Extraction tab, I get the message as below:
"Extraction of existing UD Connect data source objects".
But no list of tables is being displayed. When I entered the table name (UDITEST) manually, it gives the same error as :
" Errors occurred during extraction of UD Connect object field- table not found"...
Could you please specify from where is the UD Conenct source object fetched from?
Rgds
Syam

Delta Update not happening

Hi Experts ,
We have a master data InfoObject for which daily delta load is being done. But i have noticed that if there are any changes in the attributes,in R/3 ,then its not getting updated into the infoobject.If i am doing a full update then its getting updated. but when i am running a delta update its not. Can u please suggest what may be the possible reason??
Samir

Hi........
1) First check the datasource whether it is delta enable or not...
2) If the load is through PSA.......then check the PSA...whether data is there or not......is data is updated in PSA then check the Infopackage scheduler........whether the update mode is only till PSA.........if so then go to IP monitor........then in the Status tab clck on Process Manually to push data to the target...
3) If everything is fine.........then check whether you hav done intialization befor delta load.........if that is also done ...then check the delta queue(RSA7).......total field.......is the datasource suppose to pick any records or not......if it is 0....it means there is no new records........if the datasource suppose to pick records.......then may be ur delta mechanism is corrupted.........then do re-init.......
3) Then after loading the data..........run attribute change run to activate the master data........to do this use the program : RSDDS_AGGREGATES_MAINTAIN...........give the infoobject name and execute in background........
Every time after loading master data u hav to activate the data using attribute change run..........since upon activation os master data SID will generate.....otherwise transaction data load will fail due to SID issue.......
Hope this helps......
Regards,
Debjani......
Edited by: Debjani Mukherjee on Nov 8, 2008 9:39 AM

Delta load not picking the changes to Custom Fields in 0CRM_QUOTA_ORDER_I

We have enhanced the structure of CRM datasource 0CRM_QUOTA_ORDER_I for some additional fields that are held on the quotation. These are being successfully extracted when the quotation is being created. We have been running with this exctract for some time but we have been made aware that the additional fields on the append structure are not being updated when the quotation is being changed. Therefore delta changes are not being picked up making the reports incorrect.
The user exit we are using to extract the information is EXIT_SAPLRSAP_001
Does anyone know how we can enable this change so that delta changes are picked up by the extractor.
Many thanks
Gareth
Edited by: Gareth Aspinall on Jan 14, 2010 2:04 PM

Hi Gareth,
Can you please check that the custom fields were added as described in question 4 in the SAP note
692195? If yes and there is still a problem please check that the SAP note 1319891 has been applied
in your system, it is a pilot note so you will need to raise a message with SAP to get added to the pilot
note.
Best Regards,
Des Gallagher.

G4 iMac w/ethernet connection to Linksys router - not happening.

Hi,
My main goal is to provide wireless service to a new Toshiba notebook. I haven't been able to do that completely.
I bought a Linksys WRT54G broadband router in order to connect to my Westell Wirespeed modem (Verizon dsl service) and subsequently connect (via ethernet cable because I don't have an airport card ) my G4 iMac to the router and transmit signal to the new notebook from the router. My iMac has always had connection when connected to the Westell modem but it now won't connect when wired to the Linksys router. Is it a compatibility issue between the iMac and the Linksys router? Or something else?
This is the way the Linksys instructions say to connect everything. I have tried many times to restart, power down, power up all the components.
Thank you.
vanessa_b

Nevermind. When in doubt, call technical service...that's my new motto!

Passivation of Connection Object in Stateful Session Bean

Hi all,
I am developing a Stateful session bean that has a Connection object as its instance variable. And this bean starts transaction that spans across multiple method calls and finally either commit or rollback.
BeanClass
UserTransaction utx;
Connection conn;
ejbCreate()
allocateconnection();
ejbRemove()
closeconnection();
ejbActivate()
allocateconnection();
ejbpassivate()
closeconnection();
StartTransaction()
utx = getusertransaction();
utx.begin();
Method1()
do something with database
Method2()
do something with database
CommitTransaction()
utx.commit();
For example, the typical usage of this bean would be:
bean.StartTransaction();
bean.Method1();
bean.Method2();
bean.CommitTransaction();
Here are my two questions:
1. General Question: In order for a Connection object to join a Transaction, Do I have to create the connection after the transaction has started?
2. If the answer to the above question is yes, then: I understand that when this bean get passivated, the UserTransaction instance object would be passivated. And since the connection object can't not be passivated, I have to recreate the connection object in ejbactivate() method, would newly created connection participate in the same Transaction that was being passivated and now activated?

>
Hi all,
I am developing a Stateful session bean that has a
Connection object as its instance variable. And this
bean starts transaction that spans across multiple
method calls and finally either commit or rollback.
BeanClass
UserTransaction utx;
Connection conn;
ejbCreate()
allocateconnection();
ejbRemove()
closeconnection();
ejbActivate()
allocateconnection();
ejbpassivate()
closeconnection();
StartTransaction()
utx = getusertransaction();
utx.begin();
Method1()
do something with database
Method2()
do something with database
CommitTransaction()
utx.commit();
For example, the typical usage of this bean would be:
bean.StartTransaction();
bean.Method1();
bean.Method2();
bean.CommitTransaction();
Here are my two questions:
1. General Question: In order for a Connection object
to join a Transaction, Do I have to create the
connection after the transaction has started?Strictly NO. In fact, the connection is obtained first and then can a transaction begin.
2. If the answer to the above question is yes, then: I
understand that when this bean get passivated, the
UserTransaction instance object would be passivated.
And since the connection object can't not be
passivated, I have to recreate the connection object
in ejbactivate() method, would newly created
connection participate in the same Transaction that
was being passivated and now activated?
The answer to first question being NO, your argument for question 2 does not hold true. According to the EJB specification, a stateful session bean can only be passivated between the transaction and not within a transaction. Your implementation for the stateful EJB is good to work.

CRM IBASE mismatch for Connection object - premise

Hi Experts,
In our ECC system we have a two connection objects connected to two different premises. While in CRM if I go to IBASE of Connection object 1 we get both premises attached to it and the connection object 2 does not show any premises. I would request help in correcting this. I am very new to CRM and have little knowledge of how this works.
Thanks in Advance,
Hitesh

Solved!
Apparently after creating new IBase Component and new Product (assigned to the newly created IBase Component) it is required to execute transaction save and commit for the object of newly created Product. After that system sees newly created objects.
Required code (after creation of a new Product):
DATA:
lo_core TYPE REF TO cl_crm_bol_core,
lo_new_product TYPE REF TO cl_crm_bol_entity,
lo_factory TYPE REF TO cl_crm_bol_entity_factory,
lo_transaction TYPE REF TO if_bol_transaction_context.
lo_core = cl_crm_bol_core=>get_instance( ).
lo_factory = lo_core->get_entity_factory( 'Product' ).
lo_new_product = lo_factory->create( )
lo_transaction = lo_core->get_transaction( iv_entity = lo_new_product ).
lo_transaction->save( iv_force_save = abap_true ).
lo_transaction->commit( ).

Help with delta load

Hi Gurus!
I have a problem and I am not sure how to solve it.
Every month we receive a flat file with 2 months of accounting data. This data goes into a ODS. The next month we receive a new file and it contains the new month and the previous (again) but with some new values for the pervious month. My problem is that I don't want the full value to go from the ODS the second time but just the difference. Simplified example:
File 1 (period, amount):
200602     2000
200601     1000
File 2
200603     1500
200602 2200
I want the ODS to delta load to another ODS like this:
After first file:
200601 1000
200602     2000
After second file
200603     1500
200602      200
Do not sound like rocket science but I am not sure how to solve it best? Grateful for any suggestions!
Best Regards
Pontus

Hi Roberto!
I totaly agree on that I wont lose my 200601 data. I just wrote the records in the delta load (not the records in the ODS). Sorry if it was not to clear.
I now realize that I have to write some ABAP. I thought there was a way to solve it without that.
Thanks for your answer (you will be rewarded).
Regards
Pontus

Middleware - Delta load is not working from CRM to R/3

Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.

Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga

Delta load " material" object ?

Hi ,
I'm new to middleware ,i was trying to download the object material for delta load between R/3 to CRM ,in R3AS it is running more than 2 days &still ...
I am new to this middleware,i am like to know this process takes how much time to excute ?
2)we trying to dwnload saledocument in CRM,sender:r/3 receiver :CRM,but when we start excute for salesdocument it shows error :"no filiter citeria specfied (VBAK-ERDAT),object will not be loaded?
Please let me know about this issue..
Thanks,
Vasu

Hi Vasu,
It all depends upon the mass of the data. I recommend you to put some filter and then do the initial load through R3AS. Since your load is running for more than 2 days I will suggest to check the CRM inbound in transaction /nSMQ2. Some time it happens that the queue got stuck due to some error entry.
regarding the salesdocument you should only download the sales document once the load of BP, MATERIAL,CONDITIONS etc are completed. You should also put some filter that till what date you want to load the sales document. To do that you use the Transaction /nR3AC1 and select the object salesdocument and put the filter.
Hope this will help..
Allot points if my post helps!!
Best regards,
Vikash.

Sales Document Delta Load Error - Status procedure could not be set

Hello,
I am getting the following error message during the sales document delta loads. It errors out in SMQ2 with this message - "Error in Validation (Details: transaction SMW01)"
In SMW01, I get this message:
The status procedure CRMORD_I could not be set from item category XXX.
Message no. CRM_ORDERADM_I503
Diagnosis
Possible causes are:
1. The system administrator has not assigned the status profile CRMORD_I to the object type.
2. Initial statuses that should be set in the status profile CRMORD_I cannot be set at present.
3. The current user RFCUSER does not have the authorization to set application statuses.
Detailed error messages can be found in the following error log for status management.
System response
The status profile is not set in the document.
Procedure
Set the status profile in Customizing so that these cases do not occur.
This status profile has been assigned to the item category mentioned and the RFCUSER has full authorization (SAP_ALL)
Do any of you know what else could be the problem here?
Thanks,
MAX

Dear All,
I met similar error before, it happens when you change the item category in ECC but there is a status profile assigned to the item
category in CRM with an active status set.
In CRM, when the item category is changed, the system can only change (or delete) the status profile if there is no user status set for this item. So for example, if there is already a status set for an item (Say, E0001 'Open' is active) in CRM, so a change of the user status profile is impossible. If you need to change the item type, then you have to make sure that there is no active user status in the item.
Please see note [1113116] point 2. This is a restriction in CRM. If you try to make the same changes directly in CRM you will also get the same error.
It is not allowed to change the item category if the document has been saved and the status profile of the new item category is different from the old one.
That is the reason why the error occurs when the data reaches CRM frm ECC.
In order to prevent that there are sysfails in the inbound queue you can implement note [1438966] - after this is implemented you will not have the queues failing but you will get the error message in the sales order in CRM.
You should ensure that the configuration for alternative item categories is R/3 is the same as in CRM and in this case all the alternative item categories should have no status profile or all the same status profile configured.
I hope this could be helpful.
Best regards,
Maggie

Delta Loads are not working: 0FI_GL_10 With enhancement : HR Data in source

Hello Friends. Thanks for your answer on theory which I know, Please help me with this situation. I read all the sdn response to my message and have below for your suggestion
QUES1: Why the 0RECORDMODE is not coming in Standard DSO and hence it is not there in Transformation in between Infosource and DSO. What do I need to include 0RECORDMODE in standard DSO. What is the correct OSS to Implement on SP 10 to solve this.
Ques2. As suggested by you If I run the Delta loads after waiting for 1 hour of Init load. say init load was done at 11 am . i will do the delta at 12:10 am to psa via Infopack and then wait for an hour to run the DTP from PSA to DSO. Delta Records come in but it also bring in the records in DSO that are not changed from about 7 hours in ECC. and make our total Balance incorrect.
Ques3: We have this Cocatenation of Keys in DSO since we exceeded the total number of 13 key in DSO.
Cocatenation#1 GL ACCT and CHRT OF ACCTS
Cocatenation#1 SEGMENT AND CONT AREA
Cocatenation#1 Version, Value Typem, Valuation view, Currency Type.

Since business want to include HR Data in Keys Like Employee Number, Emp Code, EMPSPIMCODE. Payroll ID and I can not remove these fields from Key in DSO as per the business.
Also the above fields GL ACCT , CHRT OF ACCTS, SEGMENT, CONT AREA
exist in Data FIELDS OF DSO. so what are the steps to modify the design to fix this asap.
Please email me at [email protected] if you have any docs to resolve the above
Thanks
Soniya
null

Did the full load bring all records from sourcesystem to PSA?
Was this an issue with the first delta you have tested ?
Concatentaion of multiple keys into one should not be an issue here as that must have been happening in DSO and delta brings incorrect records to PSA itself.
Are you validating delta records against FAGLFLEXT inputing the timestamp value or RSA3 ..how ?
Check if this note helps
Note 1002272 - NewGL-DataSource 0FI_GL_10, 3FI_GL_*: Missing record.
Is delta bringing incorrect records to PSA or DTP brings incorrect records to DSO from PSA ?
May be you should revisit the logic behind for the enhancement of 0FI_GL_10.
I am facing a similar issue as well but here delta doesnot even bring a single record ( ODS has 20 keys )...will update if resolves and you do the same.
Message was edited by:
Jr Roberto

Load balancing not happening on UDQ in weblogic 11g

Hi Team,
I have a 2 clusters with two managed servers each on different machines
Cluster A(On machine 1)
Managed server A (on machine 1)
Managed server B(on machine 2)
I have created 2 JMS servers
JMS Server A on Managed server A
JMS Server Bon Managed server B
and a JMS module on Cluster A
and JMS connection factory targeted on Cluster A and a uniform distributed queue targeted on JMS server A and JMS Server B
But load balancing is not happening only one managed server is loaded at a time.. Using weblogic 11(aka 10.2.3)
Tried disabling server affinity but it did not help ...Can any one please let me know how to fix this?

Hi,
When you say load is not balanced and reaching only one managed server.
I assume both the UDD's targets are reachable and are visible in JNDI tree ?
also , what kind of application is it - i,e is it clustered app that would be seen as consumers on each UDQ ?
take a look at the app and check if its clusterred . along with that also take a look at the number of consumers on UDQ instances.
Let me know what you find.
Sri

I can not make delta load for some component of public sector management

Hello All:
I´am using these three data source 0PU_IS_PS_31, 0PU_IS_PS_32 and 0PU_IS_PS_42 and I realize that I can not make delta loads. When I make the full load everything is correct even when I made the delta, the problem is that the Delta load is not extracting any new data or changed data.
Do you have any idea to fix this issue?
Thanks
Message was edited by: Víctor Olivera

Hello Victor,
As u have already tried the delta load,I assume that u have already done the init load too.As system will not allow u to do delta load without doing an init load first.
The first datasource u talked about..31..it needs new records created in table FMIOI table.
What happens is..if u run a delta load immediately after an init load,there might not be new or changed records created in the system..therefore there arent any records in the delta queue.
Could u try creating some commitment document transaction data,so that records get added in FMIOI table.Then see if the delta queue for this datasource shows any records.
Links to BC pages for these datasources are below..
http://help.sap.com/saphelp_nw04/helpdata/en/1a/8c425e8afe11d496d80000e835339d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1a/8c42618afe11d496d80000e835339d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e1/46a53ec5f0c0428fa8b9cfcdcd9fcd/frameset.htm
Note that for 42 datasource..page says that delta update is not supported(though it does talk about updating delta queue).
For 32 datasource source tables are FMIFIIT and FMIFIHD.
For 42 datasource table is FMBDP.
cheers,
Vishvesh

Connection Object Delta Load not happening

Similar Messages

Maybe you are looking for