Connection object repliction from isu to crm

Dear Experts,
I want to replicate the connection object from ISU to CRM could you tell me what are the configuration steps to be maintain in the CRM sytem so that the connection objects replicates to CRM.
Thanks & Regards
Boyz.
Moderator note:  thread locked - no research done, available in other threads.

Hello,
Please see note  632749 for help with this issue.
Please also check the foloowing points:
1.  Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
2.  Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
3.  The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
I hope this is helpful.
Regards
Olivia
Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

Similar Messages

  • Migration from ISU to CRM

    Hi,
    We are populating SAP ISU via Emigall and proposing to replicate all customer data including BP, CA and Contract and all technical master data including CO, Premise and Device.  This is a lot of objects and data to replicate from ISU to CRM which will mean our migration takes a long time. 
    Are there any other options to populating data into CRM? Would you advice LSMW load into CRM and Emigall load into ISU?
    KR,
    Michelle

    Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
    BP
    CA
    Contract
    CO
    Premise
    Device
    Reg Structure
    Documents
    Dunning etc
    We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
    BP
    CA
    Contract
    CO
    Premise
    Device
    My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
    KR,
    Michelle

  • From ISU to CRM

    hi frnds
    My requirement is below
    I have created a BOR object in ISU which is related to CRM order item
    and in which the import parameters are date and status
    now when i enter them and execute object then according there should be reflected in CRM program crm_order_read but i dont know why these are not reflected
    i have also checked the FM it is retueming the correct values to CRM
    Can anybody has reason why these are not reflected.

    Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
    BP
    CA
    Contract
    CO
    Premise
    Device
    Reg Structure
    Documents
    Dunning etc
    We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
    BP
    CA
    Contract
    CO
    Premise
    Device
    My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
    KR,
    Michelle

  • Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

    Hi All,
    I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
    The following Errors/Warnings occured. Do you want to continue?
    Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
    DNL_CUST_PROD0: Object will not be loaded
    After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
    Please help me fixing the issue.
    Thanks in Advance.
    Cheers,
    Rj

    Hello RJ,
    Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
    R3AI_DNL_CUST_PROD*.
    Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
    Then try to re-load the object.
    I do not see any other reasons for the above error message.
    Best Regards,
    Shanthala Kudva.

  • Initial Load of contract from ISU to CRM

    Hi All,
    We are working on the replication of contract from ISU to CRM.
    We have done all the necessary setting,like assigning default product,running ecrm_generate_everh report etc
    When we are running initial load on SI_CONTRACT,only single BDOC is getting generated which is error free but still it contains no data.
    Since its without an error ,we are not able to figure out whats the error is.
    Regards
    Nikhil

    Hello Nikhill,
    Could you resolve the problem?? I've a similar error, the BDoc is empty. The table everh is filed but the fields contractpos and contarcthead have value '0000000000000000' i think that is the problem. ANd the recport ECRM_CHECK_EVERH say that are misiing contracts.
    Could you help me please!!!
    Thnks!!

  • Contract replication from ISU to CRM

    Hi Experts
    I have sucessfully replicated BP master data between ISU and CRM, Contract Account replication is done as well, i would like to replicate Contract from ISU to CRM. Any help will be highly appreciated.

    Hello,
    Please see note  632749 for help with this issue.
    Please also check the foloowing points:
    1.  Are there any contract account entries existing in the table 'TFK_BUAG_REF' (IS-U System).
    2.  Check the contract account entries in your IS-U system with the transaction 'CAA3'. Are they existing ?
    3.  The buag class entry in table 'TFK_BUAG_REF' (IS-U System) is corresponding to the buag class entry in your business agreement (CRM system).
    I hope this is helpful.
    Regards
    Olivia
    Edited by: Olivia Walsh on Jan 24, 2011 5:40 PM

  • Classification View in BP is not replicating to from ISU to CRM

    Hi All,
    I am very new to SAP CRM Middleware. We are upgrading to CRM 7 in out project.
    When we run a request load to replicate BP (Busines Partner) from IS-U to CRM, It successfully replicates all the data from ISU to CRM.
    But only the Classification Data is not getting replicated to CRM. Please see screen shot sbelow:
    ISU Screen shot: XD03--> Additional Data
    In CRM after Replication:
    Attribute 4 is not copied. Can anybody suggest me any solution to this problem?
    Thanks in advance,
    Suman

    Hi Ramana,
    You need to set up CRM middleware for Initial and delta load of Business Partners from R3 to CRM.
    This link may help you ->
    http://help.sap.com/saphelp_crm40/helpdata/en/1c/924555855849ba896b0af806cd343c/frameset.htm
    Cheers,
    Ashish

  • Replication of Business Partner from ISU to CRM

    Hello,
    I am creating the Business partner through 'BP' transaction and it is getting replicating to CRM,
    But when I am creating the Buiness Partner through 'Emigall' transaction it is not replicating to CRM.
    Also I added the many fields like u2018TIME_ZONE, ADDR_DATE_TO, ADDR_DATE_FROM, TEL_CNTRY, FAX_CNTRY etc.u2019 in the structure of business partner in 'Emigallu2019 transaction,
    and the business partners were created successfully in ISU, but it is still *not replicating in CRM*.
    Please help me to solve this issue.
    Regards,
    Darshana

    Hi Darshana,
    1st step: Check SAP delivery: IS Migration ->  Settings -> SAP Settings
    CRM_REPL_OFF     X     X     Deactivate CRM Replication (only IS-U)
    2nd step: Check project settings (superseding standard setting): IS Migration ->  Settings -> Customizing Settings
    - if you can't find the parameter CRM_REPL_OFF: standard setting is valid
    - if there is a parameter CRM_REPL_OFF: check whether what the parameter value is (space or X)
    Kind regards,
    Fritz

  • Need to help in initial data loading from ISU into CRM

    One our client has requirement as
    All ISU data applicable (BP, BA, the appropriate technical data, Contracts, Products, Product Configuration and their correspoinding price Keys and Price Amount) to CRM  should be loaded into CRM as the part of the intial load.
    Eventhough ECRM_GENERATE_EVERH  in ISU but its documentation is not available.
    Is any provision like Report or RFC or function module present in SAP.
    I would appreciate  for you all quick reply with positive and appropriate solution. mailto [email protected]

    Got my answer.We can clear the data using MDX.

  • ISU-CRM Initial load of connection object

    Hi All,
    Currently we are working on replication  of connection object from ISU to CRM
    We have followed the settings as metioned in cookbook-ISU/CRM replication of technical object.
    During initial download,BDOC's are going into error with with the error "General error (exception) in product API" and "Validation error occurred: Module VALIDATE_MSGBDOC_FOR_CONNOBJ, BDoc type SI_CONNOBJ.
    We have created subcategories for  connection object and POD in the hierarchy R3PRODSTYP.
    What other setting are we missing?
    Regards
    NIkhil

    Hi ,
    The number range is maintained.
    I was debugging the code and one function module COM_PR_SET_CHECK_ALL is giving error "Assign a base category to the product"
    Diagnosis "When you create a product you must assign it a category. This category is used for number assignment and must be from the hierarchy assigned to the application Product (see also No hierarchy assigned to the application Product)."
    Procedure :Assign the appropriate category to the product.
    Any idea about the error?
    The replication is working perfectly fine in our sandbox system and FM is returning no error.
    Regards
    Nikhil

  • Delta Download from ISU BP to CRM BP doesn't work

    Hi Experts,
    We are currently new implementing a CRM7.0 system which is connected to an existing ISU system. We now have an issue about the BP delta download from ISU -> CRM.
    Replication Scenario:
    ISU BP -> CRM BP, NOT SD Customer -> CRM BP. As ISU is the leading system to create BPs and in ISU a MKK BP will be created first then a SD customer will be generated based on a template. So the change of a BP is via BP transaction for MKK role, not via XD02 SD Customer.
    Issue:
    The middleware setting is done and initial download from ISU BP -> CRM BP is done and successful. However when I trying to change a BP (change a MKK BP via BP transaction) in ISU, the change is not replicated to CRM (no queues, no BDOCs). It seems the delta download is not triggered at all.
    However, I have maintained all the settings based on the ISU Specifics on the Set-Up-and-Load Guide for BP. So the followings are maintained:
    - ISU: COM_BUPA_CALL_FU maintained based on the Guide
    - CRM: CRMC_BUT_CALL_FU maintained based on the note 757955
    - CRM: V_SMOFEVOB maintained based on the Guide
    - ISU: BTE table (T-code: BF31) maintained based on the Guide
    After setting above, the initial load is working (necessary table like CRMCONSUM,  CRMRFCPAR etc. are maintained otherwise the initial download won't successful). However, the delta download from ISU BP (MKK) to CRM BP doesn't work.
    The only uncertain thing for me is the setting for ISU : CRMC_BUT_CALL_FU. In the Guide only one sentence saying CRMC_BUT_CALL_FU needs to be maintained both in CRM and ISU and details refer to note 757955. However, the note 757955 only talks about FMs for CRM not for ISU/ECC. So in ISU/ECC the table CRMC_BUT_CALL_FU I activated for the following entries:
    BPOUT BUPA  0100000 COM_BUPA_MWX_CREATE_MAIN  
    X
    BPOUT BUPA  1000000 BUPA_OUTBOUND_MAIN        
    X
    BPOUT BUPA  2000000 BUPA_CREATE_CHANGE_POINTER
    X
    BPOUT BUPA  3000000 BUPA_OUTBOUND_ALE_MAIN    
    X
    BPOUT BUPX  1000000 MDS_BUPA_OUTBOUND         
    X
    CLEAR BUPA  0100000 COM_BUPA_MWX_CLEAR_FLAGS  
    X
    CLEAR BUPA  1000000 BUPA_OUTBOUND_CLEAR_FLAGS 
    X
    CRMIN BUPA  1000000 BUPA_INBOUND_MAIN_CENTRAL 
    X
    CRMIN BUPA  2000000 ABA_FSBP_INBOUND_MAIN     
    X
    CRMOU BUPA  1000000 BUPA_OUTBOUND_BPS_FILL_CENTRAL X
    CRMOU BUPA  1000010 ABA_FSBP_OUTBOUND_BPS_FILL
    X
    CRMOU BUPA  2000000 ABA_FSBP_OUTBOUND_BPS_FILL
    X
    MERGE BUPA  1000000 MERGE_BUPA_CENTRAL        
    X
    MERGE BUPA  2000000 MERGE_BUPA_FINSERV        
    X
    MERGE BUPR  1000000 MERGE_BUPR_CENTRAL        
    X
    PXYIN BUPA  1000000 BUPA_INBOUND              
    X
    XIIN  BUPA  1000000 ABA_BUPA_MAP_PROXY_TO_DDIC
    X
    XIIN  BUPA  2000000 ABA_FSBP_MAP_PROXY_TO_DDIC
    X
    XIIN  BUPA  2100000 ABA_FSBP_MAP_PROXY_TO_DDIC_1   X
    XIIN  BUPA  3000000 ABA_FSBP_MAP_PROXY_TO_DDIC_1   X
    XIIN  BUPR  1000000 ABA_BUPR_MAP_PROXY_TO_DDIC
    X
    XIOUT BUPA  1000000 ABA_BUPA_MAP_DDIC_TO_PROXY
    X
    XIOUT BUPA  9000000 ABA_FSBP_MAP_DDIC_TO_PROXY
    X
    XIOUT BUPA  9000010 ABA_FSBP_MAP_DDIC_TO_PROXY_1   X
    XIOUT BUPR  1000000 ABA_BUPR_MAP_DDIC_TO_PROXY
    X
    Not sure if the above setting is correct or not (some of the setting may not necessary, is that will impact the delta download from ISU to CRM)
    Also what's the purpose of maintain two tables in ISU/ECC (COM_BUPA_CALL_FU and CRMC_BUT_CALL_FU)?
    Also I have read some notes that the ISU BP -> CRM BP delta download is not triggered by above tables, it is triggered by BADI PARTNET_UPDATE, is this true, a bit confused.
    I am looking forward a solution from you experts.
    Thanks,
    Laurence

    Any inputs experts?

  • Update CRM contract from isu contract

    Hi!!!
    I'm try to update the data of crm contract from sap isu contract, but isn't works fine, the status and the description of CRM contract is not updated. The Bdoc SI_CONTRACT is generated correctly, and the Badi's DOWNLOAD on ISU and CRM are enhanced, but the info is not updated in crm when initial load is launched or when a move-out it's do it in isu.
    Can you help me please?
    Regards,
    David

    Hi David,
    Even though you have a green Bdoc it doesnt mean that the information was updated correctly in CRM, it simply means that the Bdoc passed the information to the queue. Check if there are any sysfails in the queues - you get the queue name from the Bdoc - and also if there are any dumps that might be related. Have you ever been able to load data from ISU to CRM?
    Kind regards,
    Vanessa.

  • IPC error when displaying product config for order replicated from ISU

    Hi all,
    I am trying to set up ISU contract replication from ISU to CRM and I am having the problem sending product configuration. I am able to send all the nessesary settings for product config from ISU: when I look in resulting Bdoc in smw01 I see correct CUVAL values, CUCFG and CUINS. CRM order gets created without no problem. However, when I try to go to product configuration tab while displaying my order I see error message:
    ISA Framework: Internal Error: java.lang.NullPointerException
    I assume something might be wrong with the configuration values I am sending, however I have no idea how to get more details what caused this error. IPC apparently runs on separate server and I do not have direct access to it.
    May be somebody can give me a hint where to look or what to do?
    Any help is much appreciated,
    Vitali

    Hi Vitali,
    Have you resolved this error? I have the same message (but under different circumstances) and am curious how to resolve it.
    Thanks,
    Peter

  • CRM/ISU: Notes (or Texts) at Connection Object Level and replication

    Hi there,
    I am trying to replicate to CRM (and back to ISU) the Text objects linked against the Connection Object in ISU.
    The idea is to have two texts area in the Connection Object in the WebIC that can be replicated back to the related ISU's ones.
    The requirement is to replicate those texts (multiline texts, textarea, notes) linked against the Connection Object from CRM to ISU.
    The connection object in CRM is a "casted" Individual Object that can be linked against Notes (or Texts), isn't it?
    So the IObjects can have a Notes Assignment Block.
    The problem is that from an WebIC point of view the Notes Assignment block obviously are not shown.
    Have someone of you done something like that before? Any idea?
    Thanks.
    Regards,
    Carlo.

    Hey Bill, thanks for the links.  Question - is the Utilities Check Cockpit available externally?  I try the link but receive an authorization issue using my new S-id
    I am trying the following link:
    https://service.sap.com/~sapdownload/011000358700001040272011E
    Thanks,
    James

  • Unassing a Premise froma Connection Object

    Hi ISU Experts!
    I juste wanted to ask you if it is possible to unassing a Premise from a Connection Object.
    A user created a new ConnObject/Premise/Installation, but when creating the Premise he assigned it to another Connection Object. Is it possible to reassing the premise? Or Unassign the Premise from the Actual Connection Object?
    Or the should create a new Premise/installation again?
    Thak you very much in advance,
    Best regards
    LUCAS

    Hi,
    There is no reversal process where you can reverse the assignment of a premise with connection object. You need to create a new set of these technical master data once more.
    You can set the 'Delete' flag available at connection object/premise/installation level. It will be archived from the system during archive run.
    Thanks.
    Nirmalya

Maybe you are looking for

  • I see the license agreement as HTML source code

    Hello, I downloaded a trial version of Adobe Acrobat 9.0, but after I had installed it and start it, it wants me to agree on the license agreement. but my problem is that I can't click on Agree nor Disagree because I see only HTML source code see the

  • Function Module to find Reference Employee Number (PERNR)

    Hi All, Is there a FM to get employee's reference PERNR (employee number) in case employee was assigned a new employee number due to inter-company transfer or anyother reason. Thanks

  • Why can't I contact apple support?

    It says I have to have the latest browser for Mozilla, Firefox or IE, and I do!! I checked! Why can't I contact apple support? I get trapped in a frustrating circle!

  • HT2905 iPad iTunes duplication

    I downloaded from iCloud last night all my songs to my iPad. Now I have a mess of about 80% of my iPad library full of duplicate songs. How do you get rid of the duplicates?

  • No dark UI in Dreamweaver CC?

    All other CC software has dark UI theme, but Dreamweaver doesn't, why is that?