Connection of BD Player?

Just got the LG BD390 Player. Tried to connect to my Airport Extreme Network. No go. Couldn't find the connection. BD player finds the network, I type in the password, but can't connect. I suspect I need to add the BD to the Airport, but can't figure out how. I have one Airport Express running my iTunes over the home stereo, so I know other wireless devices can be connected. What about non-Apple devices like the BD player? Any help appreciated.
S

Hello srikarbaljekar
What are the settings for your router and do they match the recommend settings in the article below. You should also check the second article for additional troubleshooting, as there is a section for unable to connect as well as Unable to automatically join.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Regards,
-Norm G.

Similar Messages

How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44

What cables do I need to connect my DVD/VCR recorder through my QIP 7100 to see on my TV? I would appreciate any assistance with this since I am a novice.
Thanks
Solved!
Go to Solution.

You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.
Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.
Depending upon the TV, VCR and DVD player, the connections possible are:
1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.
2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.
3). S-VHS cable from DVD player or VCR to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

How do I connect a phono player?

How can I connect my phono player to my macbook pro?

you will need some kind of pre-amp (either separate or built-in to your stereo). you can get a phono pre-amp from somewhere like radio shack and plug directly into your mac line-in. or you can plug the record player into your stereo phono input, then take an output from the stereo into the line-in on your mac.
here's a cheap pre-amp: http://www.google.com/products/catalog?q=phono+pre-amp&num=50&hl=en&prmd=imvns&b iw=1231&bih=940&um=1&ie=UTF-8&tbm=shop&cid=11452916062981367069&sa=X&ei=72n8T82W E8Ha2AXjqOHhBg&ved=0CHcQ8wIwAA

How to connect flash video player(like youtube) to live streaming video the programm like

How to connect flash video player(like youtube) to live
streaming video the programm like webcamXP?
Or through a browser to look in a videoplayer video from
other usual personal computer with the program for a video
broadcasting from the web chamber.

you can use google to search for tutorials on skinning the component.

Connecting a DAT player to iMac G5

I want to connect a DAT player/recorder to my iMac G5. It looks like I might have to do this through a coax cable. Does anyone know if garageband, or maybe Soundtrack or iTunes, will acknowledge the files? Really, I could just use some suggestions for a method for converting the audio to save and listen to on my computer. Thanks!

You can't copy the 'files' from a DAT machine in the way that you can from, for example, an MP3 recorder. You have to connect the analogue or digital output from the DAT machine and copy the recording in real time, recording it into GaragBand or an audio editor.
If the DAT machine has an optical (TOSlink) output you can connect that to your iMac's optical input. However, note that DAT usually records at 48kHz: GarageBand only recognizes 44.1kHz. Your best bet in this case would be to record into an audio editor and convert the resultant file to 44.1.

Connecting my MP3 Player to a Ste

I want to connect my mp3 player to my "CX-CD375 Coby Micro Stereo System" but the only jack it has is a headphone jack. So I can't connect it. Or unless there's another way. I already tried a 3.5 mm to 3.5 mm cable but it didn't work.
<IMG height=49 src="http://www.pigselectronics.com/graphics/small/cbmsms.JPG" width=200> 3.5 mm to 3.5 mm cable.
I think I'm going to have to buy a new stereo. I found one that has a Y Audio input, will that work?
http://www.walmart.com/catalog/produ...duct_id=365445
And another one that has a AUX Input but I don't know how I would connect it to that. It said that It'll play music from an external device.
http://www.walmart.com/catalog/produ...uct_id=3953053

Connecting to the headphone jack of a stereo won't work, as this is an output.
If the other stereos have line-ins, aux-ins etc. chance are they'll have 2 RCA/phone sockets, so you'll need something like this cable:
<IMG src="http://www.cableuni'verse.co.uk/catalog/images/sda-hqs-3458-25.gif">

I have an ipod nano(4gb) (generation unknown as it doesn't say anywhere - I need a compatible dock to connect to stereo player etc - what adapters do I need?

I Have an ipod nano (4gb)(generation unknown as it doesn't say anywhere on or with device) - I need a compatible dock to connect to stereo player etc - what adapter do I buy?

She bought it on eBay. It came in what appeared to be normal iPod packaging with documentation and CD.

After Flash 11 install: Adobe Connect requires Flash Player 10.1 or above.

Adobe Connect will not run on my XP Pro workstation. Flash (11.1.102.63) has been installed several times, with and without AVG. We get the Flash Successful Installation Screen, try to launch Connect again, and always bounce right into the same message:
Adobe Connect requires Flash Player 10.1 or above.
Its like the system is not recognizing the Flash install. How do we get beyond this? Thanks for your help!

John
I have tried to invite my sister-in-law to join me in a Connect Now meeting. Every time she tries to respond to the dialogue box that comes up when she clicks on the hyperlink I send her, she gets a message saying that she has to install Flash Player. We have tried doing this on a number of occasions, but always end up with the same response.
I've noted from your advice above that Internet Explorer and Google Chrome require different versions of Flash Player. She tells me she has both browsers on her machine. From the description she has given me, she appears to have downloaded both versions of Flash Player.
Despite the fact that it appears she has now install both versions of Flash Player, however, she is still getting the same request to install Flash Player when she responds to my hyperlink request.
Please help.
As my sister-in-law is not technically minded, a simplified set of instructions would be appreciated.
With my thanks and kind regards,
Nicholas.

Connect to Flash Player using proxy

Notice: My English is bad, so sorry if there wrong words.
Hi
I'm connect to internet using proxy. and there's no problems to view webpages in browser. But when i'm trying to open a online flash game like DDTank and Gamezer Billiards it connect without problems but after playing for 5-10 minutes it tell me the connect was lose.
I'm using Windows 7, i was using Proxifier to connect to Flash Player using proxy and there was no problems.. i can playing any Online Flash Game.
But now, i have reinstall Windows 7 and install proxifier to connect to Flash Player again but the same problem come again!
Before i reinstall Windows 7, i googled my problem and i have found the soultion. it's (Install Proxifier and setting it to connect to proxy server 127.0.0.1 and port xxxx) i forgot what should insert in port!
So this is my problem i want to know how i connect to Flash Player and playing any Online Flash Game without any problems. i have try and insert random numbers in "Port" in proxifier but still the problem.
i remember it's 9002 or something like that .. but not work maybe i forgot
also i try to googled my problem again .. but not found that soultion was work for me. maybe i forgot what i googled exactlly.

Any help?

Is there a cable that can be used to connect a vhs player to an iMac?

Greeting all,
I am trying to find out if there is a cable that can be used to connect a vhs player to an iMac? I have some old tapes that I would like to transfer and convert to dvd.
Thanks

If you have access to a digital video camera that has pass thru capability you can use it in lieu of the ADVC110. Plug the VCR into the camera and the camera into the Mac and import into iMovie.
OT

Dv6-LT069av has a input connector for mic or other input devices, to connect a LP player

Pavillion dv6 has an input connector for mic or other input devices next to headphones connector on left side, to connect a LP player or other device thru the mic connector, what kind of cable is required? I used an RCA to male cord but no input on the notebook. And how to make it record from that mic input connector? Any settings need to be changed in Win7 to make it work? Thanks in advance.

Get one of these ...
http://www.amazon.com/Audiovox-Corporation-CRF907-RCA-Modulator/dp/B0014KKV7W/ref=dp_cp_ob_e_title_0
Connect the RF (Coax) output of the STB to the Coax-in on the modulator
Connect the Coax-out on the modulator to the TV
Connect the Video-out and Audio-out RCA jacks on the DVD/VCR to the Video-in and Audio-in on the modulator.
The STB signal will flow thru the modulator and allow you to watch TV as normal.
When you turn the DVD/VCR on, the modulator will sense the signal coming from the device and override the signal and inject it onto the coax (converting it to RF first) so that it shows up on the TV instead of the STB output. When you're done and turn the DVD/VCR off, the signal from the STB will automatically return to the TV.

How do I connect a DVD Player or game console to the X-Fi Platin

Perhaps the answer is simpler than I think, that's why I didn't find the answer anywhere. Sorry if it's a stupid question. So, how do I connect my DVD Player, PlayStation 2 and Gamecube to the X-Fi Platinum. I use optical cables for the first two and analog stereo cables (Red and White) for the Gamecube. I plug them in, but I can't get any sound out. What do I do? Thanks in advance.

months later and I still can not get the sound from the tv to sync with the sound from the pc over the digital link.
edit to say I just saw this post
"The Audigy features BUILT IN decoding, you are almost talking like it is being done through software, this is a built in hardware function of the audigy"
It is being done in software on the host CPU. No Creative soundcard has hardware based decoding. If you don't believe me try it yourself. Check the CPU utilisation in SPDIF mode and DVD playback software decoding mode. There won't be any difference in CPU utilisation between the two modes. In fact on my machine with the X-Fi doing the decoding the CPU utilisation is higher than the nVidia audio decoder.
no there's something else I didn't check before buying. there goes blind faith in a company you have used for over 8 years.
The way that the x-fi is being marketed is very aggresi've. I will know not to trust anything this company say on their box, especially until I have read second and third opinions online. Vreati've, you have just lost this customer. Next year I will buy a card that just does what I need and not one that looks like something I should have and at a ridiculous price for a sound card that doesn't actually do hardware decoing that a ?50 piece of plastic can do.
ENd rant - off to buy a home theatre system to play movies through.Message Edited by scotsmist on -03-200604:56 PM

Where did button go for new itunes to connect speakers/ dvd player through airport?

where did button go for new itunes to connect speakers/ dvd player through airport?

I realize this question is ubiquitous in this forum....I guess I'm specifically interested in knowing WHY won't the Extreme software recognize the Express unit?

Connect a DVD player through SPDIF? (Audigy 2

Hi
I have a SB Audigy 2 ZS and a Cambridge Soundworks 550 set. I often watch DVD movies using the PC DVD-dri've, but since it's impossible to get widescreen TV output from nVidia cards, I've been thinking about getting an external DVD player. The ones I've been looking at only have digital output for sound, so I'm wondering if there's any way to connect it to the sound card and get 5. sound (speakers doesn't have digital inputs)?

I've a Audigy2zs and i use the internal connection on the card with the name "CD-Digital" it's a sp/dif input on the card.
Perhaps you can make (just like i did) some nice cables to a 5inch baycover front(that's on the computercase)
connect a rca panelconnector to a sp/dif computercable(disconnect on one side the 2 pole sp/dif compu connector and solder the rca connector to it.(beware of + & - are right,the center of rca=+ the outside=-). Mount the rca panelconnector to the 5inch baypanel of your computercase. Insert the original side of the sp/dif computer cable in the CD-Digital in of the internal connector on the card. And you're done. Then you've a sp/dif input on your pc.
Connect the sp/dif audio out of the dvd-player(hifi external) with a rca coax wire to the yourself build sp/dif in rca panelconnector on the plastic 5inch baycover that you've made.
Then in the surroundmixer use the CD-Digital slider.
You can check/control the sp/dif signal in AudioHQ>Device Controls>Bit accurate mode Message Edited by www_96KHz_tk on 02-03-2005 08:42 PM
technically sp/dif = highquality stereo but let the hifi dvd-player send dolby signals to the sp/dif and just see what the Audigy2zs encodes/found on it's CD-Digital...(i've a Philips DCC730 with sp/dif connected this way works perfect 8bit/48KHz but stereo (it's the digitalcassettedeck that sends stereo, instead of more(dolby)channels)Message Edited by www_96KHz_tk on 02-03-2005 08:46 PM

Connecting a DVD player

What are the connections for a DVD player to the cable box? My video out is used to the TV, what's left is the Y Pb Pr plugs. Can the DVD player be connected to the cable box or do I have to go directly to the TV?

You need to go directly to the TV. All the inputs on the back of the STB are disabled.
====================================================================================
Error exists between keyboard and chair.

Connection of BD Player?

Similar Messages

Maybe you are looking for