Connection of iPod to iMac - USB or Firewire

I recently got the 80 gb iPod. It came with a cable that connects to the usb port of the computer. My computer is an iMac G4 so I think it's got the older usb ports (not 2.0). I was wondering if I could obtain a wire that hooks into the iMac's firewire port. I am thinking this would allow for quicker iPod updates. Is there such a cable? Will it improve the speed of my iPod updates?

Yes, the Nano and the 5th Generation iPods can both charge via Firewire. Especially helpful for users who still have those older firewire A/C adapters lying around from previous model iPods

Similar Messages

  • Computer reboots when I connect my iPod to a USB 2.0 slot

    Here are my specs:
    - I have the new iPod 60 GigaByte hardrive version.
    - Operating System on my PC: Windows XP
    - CPU: AMD Athalon XP 1.8 gHz
    - My PC is several years old and has four built-in USB 1.1 slots. My iPod works on all of these USB 1.1 ports, albeit slow. (And when I connect iPod to these slots, I get the message telling me I have a high speed device connected to a non-high speed USB port, which I understand.)
    - I just installed a Dual-Link USB 2.0 and Firewire PCI card (from ADS tech) into an empty PCI slot on my PC. It has 3 USB 2.0 slots and two Fire-wire slots. The card is properly installed because windows immediately recognized it.
    Now, I have tested two other devices on my new USB 2.0 slots. I have tested my mouse and a logitech gaming controller (although these devices are actually based on the older USB 1.1 technology), and these devices work in the USB 2.0 slots.
    But, when I connect the iPod to any of the USB 2.0 slots, I get the little bell sound meaning that the computer is recognizing it. The iPod then displays the "Do not disconnect" message. But then the computer will begin rebooting by iteself. It will then attempt to reboot windows and almost gets there, but then reboots again. It continues this never-ending cycle of rebooting until I disconnect the iPod and then the computer reboots completely. Inserting the iPod will cause it to reboot again. This happens whether or not I have the iTunes program running.
    Can anyone give me insight for resolving this problem? Has anyone else had this problem before?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Connecting my ipod to imac os9.2.2

    I am trying to connect my Ipod 15gb dock to my imac slot loading powerpc g3 mac os9.2.2 with the usb cable from the ipod dock, but my imac won't recognise my ipod. on my imac i installed itune software 2.0.4 (the latest itune version for mac os9), but itune does not recognise my ipod. later i tried to install ipod software 1.3 on my imac, but with no success as my imac does not recognise my ipod. My ipod runs on ipod software 2.3.
    does anyone know how to resolve this problem ?
    many thanks
    bernard

    my ipod 15gb dock is a full size third generation ipod.
    when i connect my ipod to my imac, finder does not recognise it as an external hard disk
    from previous postings made by niel i found out i could resolve my problem from downgrading my ipod's firmware from 2.3 (the actual version) to 2.0x. does anyone know how i can downgrade my ipod's firmware?
    many thanks
    bernard

  • IPod 4th Gen: USB yes - FireWire no. Who can help??

    Got an iPod 4G for my wife to have it connected to her vintage PowerBook G3 "Pismo" (no USB 2.0 - as required by Apple - but at least two FireWire ports).
    Problem: iTunes does not recognize the iPod when connected via FireWire. iPod is being charged (from the computer), but does not show up in either iTunes or the Finder.
    Tried three different setups: MacPro (10.6.2, iTunes 9.0.2), MacBook Pro (10.6.2, iTunes 9.0.2), PowerBook G3 (10.4.11, iTunes 8.x.x). No luck. USB works fine on all machines (too slow on the PowerBook, though, that's why I wanted the sync via FireWire).
    Reset the iPod. Installed iPod Software 3.11. Performed iPod self-diagnostic test for FireWire. Result "NOCONECT".
    Anyone having any idea what elso to try?
    Thank you so much!!
    P.S. Put iPod into disk mode manually - doesn't show up in Finder...

    Try a different cable?
    If you are near an Apple store, make an appt at the Genius bar and they can have a look and at least verify the iPod works correctly.

  • After I connect an ipod thro a usb cable, firefox will not load, but other browsers work fine.?

    Firefox works fine and is my preferred browser, but after I connect an ipod to my computer it will not load. Even after the ipod has been removed firefox will still not load until the pc is restarted.

    Open the Windows Task Manager > Processes Tab and see if there is a '''firefox.exe''' process running, when you can't open Firefox and you find it necessary ti restart your PC. When you try to open Firefox and a firefox.exe process is "hung", you should get a warning message that ''' "Firefox is already running" '''.

  • On connecting my ipod to the usb port in my car, the ipod menu is inaccessible

    please help me to access the menu.

    Hello shashankj3,
    Have you tried *resetting* your iPod classic with it still connected to the USB port in you car?  To do this, press and hold the *Select* (Center) and *Menu* buttons together until the Apple logo appears.  Don't be afraid to try this more than once if necessary.
    If no luck there, try a different cable as well as contacting the manufacturer of your car to see if there is anything they can suggest as well.
    B-rock

  • How to connect old 3rd gen firewire ipod to pc w/o firewire?

    Just got out my ancient 3rd gen 20GB windows-formatted ipod and its Firewire Cable (6pins on each side). I charged it, and now can't figure out how to connect it to my pc. I don't have any kind of dock - only the 6pin firewire cable (identical on each end).

    OK - just figured out that this is a 2nd generation ipod (20GB). It has a firewire port at the top with a cover over it. I just got off the phone with Apple Tech support and they suggested I try the forums, etc. They didn't know how to connect this ipod to a USB port. Anyone have any ideas?

  • Using Old First Generation Firewire iPod With Laptop USB

    I was hoping that someone could help me out here.
    I have an old 1st generation iPod that I bought back in 2003. It holds 10G. It used the Firewire cable, but now I have a Dell Inspiron laptop that has only USB. I tried to plug in this iPod using a USB/Firewire hub, but the device is not recognized by iTunes and furthermore, the iPod does not seem to respond with the "Do Not Disconnect" message. It seems like there's no communication at all. My questions are the following:
    1) Can a 1st generation iPod be recognized in iTunes?
    2) Can I use a USB/Firewire hub to connect my iPod to the USB?
    I really don't want this 1st generation iPod to go to waste! I hope I can still use it with up-to-date technology.
    Anyone care to lend me some assistance as to what I can do to make it work with USB?
    Thanks a lot for your support.
    Dell Inspiron B120   Windows XP   1st Generation iPod

    A firewire iPod isn't going to work with USB so you
    can drop that idea. However, your notebook has a PC
    Card slot, right? If so, you should be able to find a
    FireWire PC Card which will let you sync your iPod
    with the notebook.
    Thank you Chris and dwb. Your feedback is very valuable. Chris, thanks for reassuring me that iTunes will still recognize my OOLLLDDD iPod. Dwb, thanks for referring me to the PCMCIA Firewire card.
    Take care.

  • (MacOSX Lion 10.7.4) The problem of connecting the audio interface (USB and FireWire), grained acoustic distortion!?

    When you connect the audio interface to usb or firewire grained acoustic distortion, there is no loud noise in the acoustics! In the old "iMac24 Snow Leopard" was not like this!
    Just bought the iMac21 lion, installed the new drivers and the two interfaces of different firms is presented, this acoustic problem.
    I understand it comes from a usb and firewire!?
    Help Me_____
    Sorry for my english

    Well, it's been a few days and with no response I thought I'd look for another solution. I've been trying this software called iVPN, apparently it's like a front-end to OS X's built-in VPN server. Anyway, I disabled the VPN Server from the Server app, turned on iVPN and was VPN-ing from my iPhone over 3G in notime. It's a great app, though it kinda ***** that the server can't do what it's built to do. Since VPN was the big reason I got Server in the first place, I'll probably uninstall it and stick with OS X's built-in file sharing and iVPN.

  • USB or Firewire Interface for Logic

    Hi,
    I have a new iMac 20" dual core and am after a new audio interface to use with logic pro. Which would be the best to use with the iMac USB or Firewire?? I heard that the firewire ports are shared or something and I already have an external drive in one of the firewire ports so I was after some advice.
    Many thanks

    What you've probably heard is that the firewire bus is shared, not the actual port. All firewire ports on all Macs share the same bus. What this means is that if you are running a FW800 device and a FW400 device, the entire bus will only be running at 400.
    I'd personally recommend going firewire. You can always daisy-chain your devices and the firewire connection is better suited for audio in terms of consistent speed.
    There are plenty of posts throughout the board that talk about which ones are the most recommended. A simple search should yield an abundance of information on which interfaces are the best suited for what you want to do.

  • When i connect my iPod nano 4th gen. to my PC, it shuts down, restarts and says "restore via iTunes" or it completely deletes all my music. What to do?

    I know my iPod is an oldie, but maybe someone can help
    I restored it 10-times, but it isnt working.
    The Problem just happens, if i connect my iPod to a USB-30-pin cable, not when i connect it to my dockingstation.
    I have the newest iTunes Version, newest Windows 7 Update and the newest IPod-OS.
    Help me please ;(

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • Connecting 5G Ipod to Computer Speakers

    I have a 5G Ipod, and my computer speakers have a USB Port on the external Volume Controls. I wanted to know if i could use my Computer Jack to connect my Ipod to that USB hub and to have it play through the speakers. These are my speakers
    http://www.creative.com/products/product.asp?category=4&subcategory=27&product=4 912&nav=1
    Please get back to me

    well i tried it but i dont see how i would do it. is there a setting on the ipod to send the audio feed out of the bottom port? not quite sure. I played the music like i normally would and could only hear it out of the earbuds.

  • Can i plug my ipod 4gen via usb into my ps3 and play zombies off the app

    Hi is there an app for cod zombies online so i can plug my ipod 4 gen into my ps3 and play it

    Just what do you mean by play? You can likely charge you iPod if you connect the iPod to a USB port on the PS2. The USB cable in on the dock cable does not support out except syncing

  • When I connect my ipod, i'm disconnected from internet

    When I connect my new ipod nano 4GB to my computer, my internet disconnect always and when i close the ipod by itunes, it's correct..
    What is the problem and how can I repair that?
    Thanks!

    ok..no problem...I explain you exactly what happen..
    I connect my ipod photo by usb cable to my pc(not mac)..
    I have the latest itunes version(7.0.2)and the latest ipod driver version.
    I have usb "fastrate" modem and adsl connection (not wireless router)
    when i connect my ipod..during the synchronize my internet disconnect always.
    my uploads and downloads rate is flat(zero)
    I don't know why..and i never read anything like that
    My Internet connection still shows online in the task bar....very strange....
    but if i Want to reconnect i have take off the usb modem cable and then re-boot the modem..
    the sincronize between ipod and itunes is ok..work good..
    tell me what do you want to know about my pc to resolve that problem..
    thanks
    Fabrizio

  • Trouble connecting my ipod

    i connect my ipod to the USB port and i even have itunes open but the ipod or itunes won't respond. do you have any advice on what it could be and how to fix it?
    all help will be noticed and appreciated.

    Can you see your iPod in My Computer or Device Manager? If you can, right click on it, select disk management, and format it (FAT32, not a quick format) then Restore it in iTunes. You will lose all data on the iPod.

Maybe you are looking for

  • Getting error message in tomcat server

    Have a look at the following programs: AuthenticationFilter_ import javax.servlet.*; import java.io.*; import java.sql.*; public class AuthenticationFilter implements Filter      ServletContext sc;      Connection con; public void init(FilterConfig f

  • How to make Messages appear on a specific View?

    Hi, we are bulding a webdynpro application which uses several views in different components. We are using the IWDMessageManager to display messages. The strange thing is, that the messages do not always appear in the view You would expect. For exampl

  • Can I use regular Oracle Client version with Oracle XE Database?

    Should it work? Should it be legal or not?

  • Can't update E61 (prod code 0538289) to firmware v...

    Hi, I've been trying to update my E61 phone (prod code 0538289) to the latest v3 firmware build for over 3 weeks now. The phone came factory flashed with firmware v2 and would like to take advantage of the enhanced SIP capabilities present in v3. At

  • E71 Update to 300.21.012 Report

    Did install new Firmware, this is the report... what- or who-ever it might help. Did have 200.21.118 and did install 300.21.012.. it said something about improved performance, which i need because maps and sporttracker running in parallel does not wo