Connection of more then one device to a PC

Hi,
I have a product which need to work with 4 devices (no specific model - each time can be a different device[s]), at the moment we are using the PC Suite, and we found a limitation that only one device can be connected to each server.
Is there is away to connect more then one device to a PC using the PC suite?
Thanks,
Idan

As far as I know the short answer is no. The same applies with acyive sync and windows mobile. You can only sync one device at a time as far as I know.

Similar Messages

  • Configure more then one device at the JMF??

    Hello every body..
    I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
    I hobe that any one can hep me..
    The problem:
    If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
    I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
    If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
    I don't know how i can solve this problem??
    please help me !!
    For reply or any information contact me at my e-mail
    [email protected]

    Thanks for reply sir omcgovern..
    I read what you say but i wondered while this problem from 2003 there is no any solution to this problem??
    Now , what i can do to trick this problem???
    Please if there are any solutions help me as fast as can !!!!!

  • Is Apple TV able to connect to more then one tv

    I was wanting to get Apple TV but I have 3 TVs can I connect Apple TV to all of them or do I have to buy a seaprate Apple TV for each tv.

    Ideally you'd need one for each TV unless you want to unplug and move it around for each set you want to watch on.
    It only has one TV output, which is HDMI - you might find some kind of HDMI splitter to run HDMI to all 3 TVs but that would not be cheap when you'd payed for all the boxes and cables, plus you'd have the same content on each TV.
    AC

  • Can't connect to more then one server in a java appl.

    Hi:
    I'm connecting to OCS via java as the administrator without problems. But, even if I close the first connection
    I can't open the second one without getting an user unknown error. If I connect only to one or the other everything works.
    Here's part of the code:
    // Get system properties
    Properties props = System.getProperties();
    props.setProperty("oracle.mail.sdk.esmail.encryption", "false");
    props.setProperty("oracle.mail.sdk.esmail.driver_type", "thin");
    props.setProperty("oracle.mail.ldap.connectssl","true");
    props.setProperty("oracle.mail.ldap.sslport","636");
    props.setProperty("oracle.mail.ldap.admin_dn","cn=xxxx");
    props.setProperty("oracle.mail.ldap.admin_password",xxxx);
    session = Session.getDefaultInstance(props, new OracleAuthenticator());
    // Connect to the mailstore (Oracle)
    OracleStore store = (OracleStore)session.getStore("esmail"); // esmail is the Oracle provider name
    store.connect(owserver, -1, owuser, null);
    store.close();
    owserver="anothermachine";
    owuser="anotheruser";
    store.connect(owserver, -1, owuser, null);
    System.exit(0);
    Please help.
    Regards,
    Jerry

    Almost forgot, here is the error I am getting.
    ESDS error code - 10010] User Doesn't Exist
    at oracle.mail.ldap.ESDSContext.cacheUserAttrs(ESDSContext.java:690)
    at oracle.mail.ldap.ESDSContext.cacheCallerParams(ESDSContext.java:534)
    at oracle.mail.ldap.ESDSContext.<init>(ESDSContext.java:145)
    at oracle.mail.ldap.ESDSDirServerAccess.ESDSClientLogon(ESDSDirServerAccess.java:829)
    at oracle.mail.sdk.esmail.OracleStore.connect(OracleStore.java:921)
    at WriteOJMA.connect(WriteOJMA.java:52)
    at ReadOJMA.main(ReadOJMA.java:123)
    Exception in thread "main" javax.mail.MessagingException: [ESDS error code - 10010] User Doesn't Exist
    at oracle.mail.sdk.esmail.OracleStore.connect(OracleStore.java:1023)
    at WriteOJMA.connect(WriteOJMA.java:52)
    at ReadOJMA.main(ReadOJMA.java:123)

  • How do I plug in more then one device at on

    I was just wondering how to plug in headphones and speakers at the same time, I can only get one or the other to play at a time, is there any way to do this? Is there anyway to assign what each plug does?

    I take it you don't have a mike/headphone jack on the front of your pc.
    Dell XPS 600 Intel Pent D 830 3.0ghz
    Chipset- Nvidia nForce4 SLI Intel Edition
    WD 60gb HD
    2gb Ram
    DVD-ROM
    DVD-RW (Plextor 760A)
    Creative XF-I Extreme Music
    Logitech X-540 speakers
    EVGA 7950GT
    Dell 2007WFP (I-SPS panel)
    Win XP SP2
    BIOS A

  • More then one device??

    I first updated my daughters ipod touch with new software and set it all up including icloud and imessages as she shares account with me. we share songs and apps already, but thats all i want to share with her. she also needs to have own imessagews but cant work out how to do any of this

    I have the same issue....set up her ipod touch but now she has my contacts, apps etc plus we both get duplicate imessages..hopefully someone has a solution.

  • Put disk on more then one device?

    I have iwork disk from when I bought our mac desctop and I just ordered a mac book pro (cant wait for it to get here) and was wondering if i can use the same disk for the laptop as well?

    Only if it's a family pack.
    (79710)

  • Catalyst 520 more then one mac address

    How do I allow more then one device on all ports of the 520 Switch. When I hook another switch to any port on the switch it will only allow one Mac address/ or device to that connections. How would I disable that. Any step by step instructions would be great.

    Sounds like mac based port security is enabled. I've never worked on the Catalyst 520 but there must be a config section under security. However, be very careful connecting switches to other switches. An Ethernet loop can ruin your day.
     

  • Express won't connect to more than one devise

    I got an airport express used and it won't connect to more than one device. First only my MacBook and would not allow my iPad on. And now the playstation is connected and the MacBook can't get Internet. Any advise?

    Kyle-BHD wrote:
    I got an airport express used and it won't connect to more than one device.
    Please identify the model number of your AirPort Express (A1084, A1088, A1264?), the brand(s) and model number(s) of your other networking equipment, and how it's all connected. When you launch AirPort Utility and put the AirPort Express into "manual setup" mode, what value do you see for "Connection Sharing" in the Internet panel, "Internet Connection" tab?

  • Why won't my Time Capsule allow me to connect more than one device to the network at a time?

    Ok here is the shortest story I can come up with...
    Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
    I replaced that network with a new TIME CAPSULE and it is doing the same thing.  I took my old AirPort Extreme to my work and it works like a charm.  My ISP says it is an Apple problem but I have had the same settings both at home and at work.  Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
    Any suggestions?

    I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
    Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
    I am using a 2TB Time Capsule running DHCP in Bridge Mode.  I can't find the software version but updated it while installing it within the last two months.
    Under Network Tab
    Enable NAT Port mapping is checked
    Under the Wireless Tab
    we have a 5ghz Network
    Radio mode is set to:  802.11a/n-802.11b/g/n (Automatic)
    2.4 GHz is Auto
    5 Ghz is Auto
    I hope this helps....

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • More than one device connected?

    I am testing out a project for a mobile device and  when I package the apk and attempt to launch it on my phone, I get an error message sying that it can't be done because I have more than one device connected. I only have one device connected.
    I've tested this project before n my phone and it launched as it was supposed to, but I added a document class to the project and think that might be causing the problem. Previously, I added all of my action script to a keyframe on the timeline, and everything worked fine.
    I'd like some feedback as to whether or no the document class issue is the likely problem and how to get around it. If that's not the problem, I'd like to what what might be going on. As always, any help is greatly appreciated. Thanks.

    using a document class is not the problem (though your document class may be a problem if it has errors).
    use a file explorer to see if your computer lists more than 1 connected device.  or restart your computer to reset its external connections.

  • Can you connect more then one external screen to a mac with one mini display point?

    Does any one know if you can connect more then one external screen to a mac, with one mini display point?

    This company has a dual monitor solution for DisplayPort;
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • Can I connect more then one cDAQ-9188 in the same network?

    Hi, I have one question for you.
    Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
    thanks in advance for any response.

    You will need a network switch and make sure they are different IP Addresses, but same subnet.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Simultaneous connection of more than one unit of GPIB device

    Dear all out there,
    Would anyone has any idea/ solution in programming of ATE that makes Simultaneous connection of more than one unit?
    What's the better, if not the best, way of initialisation, acquisition and report generation for such system? without significant delay incurred.
    For instants,
    1. Initialise X number of, say, Agilent 34401A multimeter (GPIB)
    2. Acquiring of meter readings from each meter, limit check and write to respective report
    Any idea/ sample code/ solution is very much appreciated.
    Regards
    ian.f k
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com

    albert geven wrote in message news:<[email protected]>...
    > The connection of multiple multimeters to the gpib bus is normal, the
    > only thing you need to do is switch them each to a unique address on
    > this bus.
    > Your program can best initialise all multimeters once in the beginning
    > of your program and read out those meters when appropriate.
    With many instruments there are two types of "initialise."
    One type, which is a reset, choose range, etc., as you suggest can
    be done at the beginning of a program or section of a program.
    However, the other type of initialize is to sent the SCPI INIT command
    to the instrument. This command tells the instrument to take a measurement
    (or scan of measurements).
    When dealing with multiple multimeters, there are at least 2 ways of
    handling measurements. The slow way deals with one instrument at a
    time -- using the SCPI commands INIT, wait FETCH?, or perhaps just READ?
    sent to each instrument. It is slow because each instrument must wait
    for the previous instrument to finish before it can start.
    The better way is to set up each instrument for the desired measurement.
    If simultaneous triggering is needed, either use some type of external
    trigger or BUS trigger if the instrument can use it. After all instruments
    are set up, issue the INIT command to each instrument, then trigger.
    when all measurements are completed, use the FETC? command to get the
    results from each instrument. Note that there may be Plug&Play drivers
    to issue these commands for your instrument.
    [email protected]
    www.CompleteTest.com

Maybe you are looking for