Connection only with Hub 5 but nothing else?

Trying to use an alternative to Hub 5. TP-Link Archer D7. But it will not connect to internet?  HH5 connects but range and speed not good.
Help appreciated please.

have you set username to [email protected] and if password required then anything will do - many just use BT
should also be set to pppoa for adsl not pppoe
can you post any stats
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Sound with cd rom but nothing else

    my problem is my sound works only with my cd rom
      and nothing else
     running windows me
     windows 98 se and windows xp works fine but nothing with windows me
     i have loaded all the drivers and updated them
     in the device manager it says with a ? mark beside it
       via pci to usb enhanced host controller
    is this why my sound wont work ?
     ms-6738 motherboard
     athlon xp 2400 plus processor
     512 mb 3200 ddr 400 ram
     40 gig segate hard drive
     sound blaster sound card
     ati rage 128 fury pro video card
     400 watt power supply
     any information would be very helpful

    well guys thank you but im selling this board ,
       went to the store and bought a new board
    using the same processor though and ram
     they were trying to get me to bring it in there and let them look at it
     but i had decided to get a new board  
    not that i didnt like this one , but i have another processor to go with it
     1.4 gig duron
    thank you
    A7N8X-X motherboard
    2400 athlon xp plus
    512 400 ddr ram
    40 gig
    60 gig
    80 gig
    sound blaster
    ati rage 128 fury pro video card
    cdrw

  • I get a Software Update message that says "Update Available" A Security and stability update for Firefox is available: Firefox 8.0.1 ...when I click the link I get a message that Firefox is connecting to the update server but nothing else happens.

    When I click the link Firefox shows a status bar and states that it is connecting to the update server, but the status never changes and nothing seems to be happening.

    Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

  • I was trying to update my ipad mini from 7.0.4 to 7.1.1. after updating it went for restarting and from then its showing only the apple logo but nothing else. i can't restart my ipad. i tried to restore from my back up. its not working.......what should i

    help me out

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • The bookmark feature has stopped working, I can only bookmark my homepage (google search) but nothing else.

    Firefox is simply unresponsive when I try to save a page as a bookmark, I have tried clicking the star in the URL bar, using ctrl-D, right clicking on the page, and saving from the bookmarks tab. None of these options do anything at all.
    I have tried turning off different add ons but have not had any success. The only time I can get it to save a bookmark is if I bookmark my homepage, then it will save that, but nothing else.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Facetime works with USB UVC gearhead webcam but nothing else does

    I have a gearhead USB 2.0 webcam that facetime easily see but nothing else does
    It is a model WC4750AFB from gearhead it uses USB 2.0 Connectivity with UVC and Facetime sees it but I can not get any other applications to use it
    Why can one app on my mac mini find and use it suxxesfully and others can't. This is really stupid. There is no basic instruction onhow to setup facetime or find out how it can see the webcam and it would be nice to know so I can get it working with my other app on my MAC mini

    Logitech - HD Webcam C615
    http://www.bestbuy.com/site/logitech-hd-webcam-c615/2588445.p?id=1218337862339&s kuId=2588445
    Logitech - C920 Pro Webcam
    http://www.bestbuy.com/site/logitech-c920-pro-webcam/4612476.p?id=1218501788204& skuId=4612476
    I know FOR A FACT that those two WILL WORK with Mt. Lion and ALL Mac Apps that use a cam.
    Skype too.
    I really like the 920. It shoots in 1080p HD. EXCELLENT picture quality and video quality.

  • When I start iWeb only the Navi Bar appears but nothing else. What to do?

    when I start iWeb only the Navigation Bar appears but nothing else and I can't use the program. I have the latest version and I use iLife11

    Try the following:
    close iWeb.
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
    go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    Lastly, select an album in iPhoto and use the Share ➙ iWeb ➙ Photo Page menu option. It might take a couple of tries.
    OT

  • I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
    Mylenium

  • TS1702 i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    The users guide says:
    Spotlight searches the following:
    Contacts—All content
    Apps—Titles
    Music—Names of songs, artists, and albums, and the titles of podcasts and videos
    Podcasts—Titles
    Videos—Titles
    Audiobooks—Titles
    Notes—Text of notes
    Calendar (Events)—Event titles, invitees, locations, and notes
    Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
    Reminders—Titles
    Messages—Names and text of messages
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsynce all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock.  How to I get it to open from there?

    After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock.  How to I get it to open from there?

    Hello,
    See if it'll Safe Boot from the HD, (holding Shift key down at bootup).

  • Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

    Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

    Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I'm sure I'm being a bit dense here but I cannot seem to transfer music of shows I have downloaded onto my iPad with my library.......it syncs app but nothing else! Help please?

    I'm sure I'm being a bit dense here but I cannot seem to transfer music of shows I have downloaded onto my iPad with my library.......it syncs app but nothing else! Help please?

    Thanks for this. I also found out that all I needed to do was right click on the device and select download purchases! I new I was being dense......thanks again.

  • My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

    My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • ACE 4710: Possible to allow a user to clear counters but nothing else?

    Hello all,
    Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc.  We would also like to allow this user to clear the interface error counters as well, but nothing else.  Is this possible?
    Thanks!

    Hello Brandon-
    Network-Monitor only lets you browse outputs, it is a not a role that allows a user to make any changes including clearing stats.  You can create custom roles and domains to get closer to what you want, but you cannot zero in on a single command like that.
    i.e.
    ACE# conif t
    ACE(config)# role MyRole
    ACE(config-role)# rule 1 permit modify feature ?
      AAA             AAA related commands
      access-list     ACL related commands
      connection      TCP/UDP related commands
      fault-tolerant  Fault tolerance related commands
      inspect         Appln inspection related commands
      interface       Interface related commands
      loadbalance     Loadbalancing policy and class commands
      pki             PKI related commands
      probe           Health probe related commands
      rserver         Real server related commands
      serverfarm      Serverfarm related commands
      ssl             SSL related commands
      sticky          Sticky related commands
      vip             Virtual server related commands
    You can create a permit or deny rule, within that, create/debug/modify/monitor each feature seperately.
    Domains allow you to create containers for objects.  You can place specific rservers, serverfarms, etc. into it - then apply it to a role so that the user assigned to it can only touch those objects.
    Regards,
    Chris Higgins

Maybe you are looking for