Connection only works one way

I've been using LogMeIn for about 5 years. I renewed my subscription 2 weeks ago and can now only connect to my HOME PC from WORK.I am no longer able to connect to my WORK PC from HOME. Any suggestions ?

I am having the same issue. With both computers in my office I can connect with my school PC to my MacBook, but I cannot connect from my MacBook to my PC. "Could not connect. Check your internet connection" is the error message I get. Fix?

Similar Messages

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

I added a contact to my iphone 4s and when I did a sync manually it is not showing up on my MAC in address book - please help....I checked off sync all contacts in iTunes - does it only work one way from computer to phone?

Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer.

Lightning Connector Only Works One Way

I have two lightning connector cables, and the new 30 pin to lightning adapter, all direct from Apple.
I've found that if I plug them in one way, my iPhone won't charge, but, if I plug it in the other way, they work.
It'sprobably a software issue, as the pins aren't being reassigned. I found that if I have the plug in, and it's not working, I can restart my iPhone 5, and the cable will begin working for this orientation, but not the other way.
I've seen others mentioning this issue, but haven't found a solution yet. I've tried a hard and soft reset so far, and all that does is set the pins to work for one direction on the cable, not both.

I recently tried resetting all my settings. This did not work either.
The cable may appear to be charging, but no juice is flowing. If I reverse the cable, however, it starts charging.
I can't be the only one with this issue, as it appears to be firmware related. There's a chance it's hardware related, but my iPhone was working fine for weeks, with all cables. Now, all my "reversible" lightning cables only work one way.

Google Account BlackBerry Sync only works one way

Hey I just got my BB yesterday... I set up my Google Account on my BB and it downloaded all the data to my device. Then I set up an new Test-Contact and a Test-Appointment (calender) on my BB and it was synced to my google account... everything was fine... After that I set up another Test-Contact and Test-Appointment in my google account to check whether it would be synced to my BB... But that did not work at all... NOTHING WAS SYNCED... I waited for houres but it just would not sync the data to my BB... Same situation if I read or delete an Email in my google account the Email still appears as unread on my BB... But when I read one on my BB it appears as read on my google account... seems like sync is just working one way!
Any ideas?

I'm still new with BB, using it as a loaner phone when my Android got waterlogged. I have the same problem, sort of - in my case, I noticed with Emails that it takes a good amount of time for one read on the BB to show as read in my Gmail. And it's the same the other way except maybe a tad faster.
But I'm not able to sync my google calendar any longer. I read that google was dropping support for BB sync options sometime around 6/1/12, and somewhere in these support forums there's a thread on the topic, stating you can use your BIS account to get them to sync, and in looking for that thread I ran across your post. If I find it, I'll come back and link to that thread.

IP phones only working one way

Sorry, I'm a complete VoIP novice...
We have a bit of a weird problem in that when you dial an extension which is our other office (connected by 2 x 2mpbs MPLSs) the caller can hear the recieving person's voice but the the recieving can't hear the caller. This happens both ways, i.e. when we call them and when they call us. We do have an access-list in place and I have opened up the ports that were logged as being denied when the calls were placed (namely 51000 range) and now nothing is being logged as denied.
Apparently this has worked when initially tested, so I'm not sure what could have changed.
Any ideas? Has anyone come across this before? We are using Avaya phones.
Many thanks,
J2026

Thanks for your response Martin, much appreciated.
1) I have removed all filters and re-tried: same result.
2) Definitely connectivity is OK, OSPF routes in place, lots of traffic passes between the 2 regularly. Verifyied by ping as suggested.
3)This could be an issue...I've looked at the interfaces in question, and some of them have a large amount of drops - input queues leaving from here and output queues from the other offices, e.g.
Output queue: 0/1000/64/1067272 (size/max total/threshold/drops)
However, I have cleared the counters and tried again, with same results, yet no more packets had been dropped.
4) We currently only have 4 IP phones (1 at this site, 3 at other) as we are still setting it up. The problem is with all 4 phones, when going between offices. They work fine within the same office (to IP and standard analogue phones). Also, I can use the IP phone here to dial out to my mobile with no problems (this does not traverse the 2mpbs MPLS).
We will be implementing some QoS queueing tools but I was under the impression that we should be able to get at least some, albeit choppy, audio working. Do you think it's likely/reasonable that this problem won't go away until proper queuing is implemented?
Many thanks for your help.
Regards, J

Audio only works one way

My friend and I tried audio chat today. In the past it worked fine. He has a new Powerbook and I have a G3 iBook, both of us are running Tiger.
He can hear me fine on audio chat but I cannot hear him at all. I have tested my headset and both the audio and mic work fine. He said his mic appears to be working correctly too.
Some additional info:
- he is on an ISDN connection
- I am on a broadband connection
Previously, he was on broadband but has had to switch to ISDN.

Check syst. pref's sounds panel for correct settings and also go to ichat pref's & over to video.
Does it say "Ext. mic/Line in" or does it say, "Sound Input" above the Bandwidth Limit menu?
if you are using a line or ext. mic please change the setting accordingly (namely to "Ext. Mic" if you are using an external source for audio input as indicated above in your post).
Hope this helps but if not then you may have a network port issue. Either way please feel free to post back.
SDMacuser

File Sharing on a Network and it only works one way

I recently configured a new wireless network, and want to fileshare between my Mac and old PC. I have followed several tutorials, and I can read/write to the Mac from the PC. However, when I try to connect to the PC from the Mac, it asks for username and password. I type in the only user name and password setup on the PC, and it says I do not have access to that server. Any ideas?

There is a "Server" service, and it is running on the laptop. The file I needed to move was ~150GB - wifi would be faster than OneDrive. You can appreciate my desire for full gigabit speed :)
I can connect to the laptop from the desktop over wifi. So the functionality of sharing is all there for me. But I am completely unable to set the wired network's location to "Private", which essentially enables Windows Firewall rules under the hood that
block any file sharing connections.
I can manually edit the firewall rules, but these apply only to network location profiles, i.e. "Domain", "Public", "Private", or "All".
I'll post a few screenshots to try and make this more clear.
Here is my wifi connection. Highlighted in red you can see the option to enable file sharing. Prett slick.
Here is a screenshot of my wired connection. As you can see, the option to enable sharing is completely missing.
The only explanation I can come up with for this is that it is an "Unidentified network", however on the other end of the cable is a desktop with the same connection settings running the same OS with the same updates and on that machine the network is set
to "Private" and has file sharing enabled. The option to enable or disable file sharing does not appear on the desktop either. The only difference between the two is that the network was enabled on the desktop prior to updating to Windows 8.1 (from Windows
8), the laptop had Windows 8.1 clean installed.

IChat only works one way for me

Hello,
I have an IMac running on OS X10.4.11 with IChat 3.1.8 (445). My son has a new MacBook running OS X 10.5.1 with IChat 4.0 (601). My son can invite me to video chat from the MacBook and I can accept from the IMAc. Everything is good. However when I initiate the invitation, it doesn't work. His "accept" button is not blue like it should be. I have a .Mac account whereas he is using AIM. we are on each other's buddy list, both active and can see each other's video-ready icon on each other's buddy list. We've both downloaded the latest software. I have set both machine's QuickTime to 1.5mbps. I have set IChat bandwidth on both machines to NONE (no success) and then to 500 for comcast, which is our ISP. I'm stumped. Help!

Hi
In Leopard the Accept Button is not Blue.
Has he got any Firewall set ?
It is likely that he can call out through this but not accept incoming calls.
9:46 PM Monday; December 10, 2007

Scolling on wireless mouse. only works one way

from time to time, my mouse will not scroll up, but will continue to scroll down. This is when i use firefox (as my main browser). In the past, I'd oddly open up safari and scroll and problem solved. but not now.. not sure if its a hardware or software issue. I have gone into settings for mouse and reset as well..

It's possible that the scroll ball just needs cleaning. Take a look here:
http://support.apple.com/kb/HT1537
Hope it helps.

Traffic only allowed one-way for VPN connected computers

Hello,
I currently have an ASA 5505. I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine. They just can't access the internal LAN (192.168.250.0). They can't ping the inside interface of the ASA, or any of the machines. It seems like all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN. It seems the traffic only allows one way. I have messed with ACL's with no avail. Any suggestions please?
DHCP Pool: 192.168.250.20-50 --> For LAN
VPN Pool: 192.168.250.100 and 192.168.250.101
Outside interface grabs DHCP from modem
Inside interface: 192.168.1.1
Current Running Config:
: Saved
ASA Version 8.2(5)
hostname HardmanASA
enable password ###### encrypted
passwd ####### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: end

Hello,
I seem to be having the same kind of issue although I cannot ping from either end.
Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
I tried running:
access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list NAT_0
but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
Any help would be much appreciated
This is a part of my config:
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network AD1
host 192.168.1.31
description AD/RADIUS
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network vpn_hosts
subnet 192.168.2.0 255.255.255.0
access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list split-acl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 ########## 1
no vpn-addr-assign aaa
no vpn-addr-assign dhcp

Active Syn works one way only with calendar

I need some help. I have a Treo755P with Sprint and I remotely syn my email, contacts, and calendar with my office Exchange Server. Everything works great except my Outlook calendar only syns "one way!" Input into my Outlook Calendar syns with my Treo755 Calendar, HOWEVER, input into my Outlook Calendar DOES NOT syns back to my Treo755. By the way everything else syns fine both ways!!! I have checked with our Exchange Server Administrator and everything is going on fine from there end, so it seems to be in the phone. I just discoved this issue but it appears by my Outlook Calendar that it has been going on a few months. Please help.
Post relates to: Treo 755p (Sprint)

Hello and thank you for using the Palm Help Forums!
One thing you can try is delete the server sync profile and then recreate it. Make sure you have all the server information needed before doing this. I'll continue researching this issue for other means of resolution.
Post relates to: Treo 800w (Sprint)

What are the limitations of AMS5 only allowing one-way broadcast for the video capture support?

I am interested in a tool that can access a clients webcam and begin recording from their device. When the time is up, it should store that recorded video to a server. Then, of course, the files can be accessed. Streaming is of less significance than simply capturing and accessing video from a client
Can I do this with only Adobe Media Server Standard Edition?
Bearing in mind, I may need to be capturing video from multiple clients at one time. Is this limited by the fact that Standard only allows "one-way broadcasts?"
Thanks,
Carl

Thanks for the suggestions. I've tried using DVCPRO HD in the past, but the picture quality of the captured screen footage turns out blurry. The only codecs I've found that provide a perfectly clear image are H264, Animation and Uncompressed 8-bit. The problem with the latter two is that video files lasting only a few seconds measure in the 100s of MBs. Working with files that large would slow my editing and rendering down to a non-workable length.
I just don't understand why I can't edit H264 video if my sequence codec is set to H264. The 'Codec error' I get is baffling.

My Apple wireless mouse only scrolls one way. I've tried cleaning the

My Apple wireless mouse only scrolls one way. Any ideas on how I can set it up so it scrools up and down?

I am having the same problem also. I've tried cleaning the ball, but still not working. This happened a couple of times before....and by accident I hit some button and it started working again. So frustrating........sorry I'm not any help. Just venting.

Why my wifi connection is unstable? I have an ipad 4 wi-fi and my net connection only works very close to my router!

My wifi connection only works well if i am really close to my router. My notebook connection runs great either close or far from the router! What can i do about that? Thank you!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Linksys E1000, make connection only to one web page

Hi,
I have Linksys E1000 wireless router . I would like to know or it's possible to make - other people, who find my wireless connection can connect only to one my personal web site. Maybe you know how make that and you can help me.
Thank you in advance

Sorry, this is not possible.

Connection only works one way

Similar Messages

Maybe you are looking for