Connection printer to time capsule with wifi ... Problem

Sorry i am french... so my english is verry bad
I have buy yesterday a new printer with wifi connection, my problem is the wifi software into the printer dont find the time capsule...
Can you find a solution?

The new 7.6.3 firmware and 6.2 utility is supposed to provide WPS which is probably what the printer is requesting to do connection.. but you can use WPS without the new firmware. WPS is available.. just tricky to get at.
http://support.apple.com/kb/HT3500
The manual setup method suggested in the above article is the best.. just plug the printer into the computer by usb and use the setup disk that came with the printer.. I have done a few of these and it works fine.
I do recommend before you start.. setup TC with SMB type names.. ie short, no spaces and pure alphanumeric.

Similar Messages

MacBook Pro won't automatically connect to my Time Capsule for WiFi

My 2012 MacBook Pro (non-retina) won't automatically connect to my Time Capsule for WiFi. I had issues with my Comcast router before, and i reset my time capusle a few times, is that th reason why now everytime i wake my macbook up it dosent automtically connect?

Yes.. wireless after sleep or reboot is a problem. See the info from Tesserax.
https://discussions.apple.com/community/wireless/airport?view=documents
Unable to connect after sleep .. you will see it in the list.

HT2250 Installing printer to time capsule with bonjour: failure message 1802

"When installing printer to time capsule with bonjour the fault message 1802 pops up:
"You have insufficient access to your computer to make connection with selected printer

We have no replies.... now what do we do?

Can I connect and use Time Capsule with two printers?

Can I connect and use Time Capsule with two printers?

Sure, if the printers connect using the Ethernet port, you have 3 ports on the Time Capsule.
If the printers connect using wireless only, the Time Capsule will support up to 50 connections.
If your printers connect using USB, then you will need a powered USB hub. Something like this, for example:
Dynex 4Port USB 2.0 Hub DX-THUB16 - Best Buy

I cannot access the external hard drive connected to my time capsule via wifi

I have two external hard drives (a WD mybook and an older Seagate, both HFS+ formatted) connected via a USB hub to my time capsule (which is also my wifi router).
Here's the funny thing: If I a connect my mac mini to the time capsule via an ethernet cable, both disks show up as normal in Finder - along with 'Data' under Time Capsule under Shared.
But if I disconnect the ethernet cable and connect to the router via wifi, there's no sign at all of the two disks - not in Finder, and not under 'Disks' in the Airport Utility.
Anyone out there with a solution?!

Hi William, and thanks for replying.
I do have a guest network set up (for exactly that reason that guests don't get access to shared disks) but am definitely not connected to it.
So sadly it has to be something else.

HT201250 cannot connect to my time capsule anymore wifi still works

Time capsule wont connect for backups anymore worked great for years. The wifi still works, green light was on (not now since i've tried to troubleshoot by erasing the disk and resetting). Any help would be appreciated.

PC and well every device other than Apple do not like the names that Apple tends to use.
Reset the TC and redo the naming..
Names for TC, wireless and hard disk .. should be short, no spaces.. pure alphanumeric.
It also helps if you lock the wireless channels.. and even set the 5ghz to a different name to 2.4ghz.
There are only 3 non-overlapping channels on 2.4ghz.. 1, 6, 11, test each in turn and pick the best.
WPA2 Personal security with 8-12 character passkey.. pure alphanumeric of course is a must.

Time Capsule with WiFi ONLY?

Is it possible to set the time capsule up without ever hooking up the Time Capsule itself to a router? I use my neighbor's WiFi (with permission), but I never have access to their router. Please help me!

James,
You can only connect to one network at a time with any computer...
If you want to connect to their network for the Internet, then you would have to choose their network.
If you want to backup to your TC, then you would have to change from the above network and choose your other TC network... To me, that is a pain in the rear but that is up to you.
Good Luck...
Joseph Kriz

Need help connecting 5th gen Time capsule via wifi to existing wifi network(non-apple) and use ethernet out to AV receiver?

Could anyone help advise me how to use my 5th gen time capsule airport to connect to my existing wireless modem(non-apple) over the wireless network (NOT using the WAN port with a cable) and then connect with an ethernet cable to give internet connectivity to my AV Receiver? I would also like to be able to back up my macbook pro with the time machine/time capsule benefit. I know that many AV setups have recommended using airport express to receive wireless connectivity to pass on internet through the ethernet port to AV setups, but I thought I would try to add the extra functionality of the over-the-air backups with the time capsule at the same time. Is this possible without connecting with a wire to the modem which has no ability for a wired connection where the TV and AV setup is? Any help would be much appreciated:)

It doesn't work except to another apple router. Sorry.
The express does work.. that is a difference between Express and Extreme/TC.

Connecting iPad2 to Time Capsule(Apple WiFi router)?

I have an iPad 2 and I'm having trouble connecting it to my Time Capsule router. I have the 4.3.1 (8G4) version, not the iOS 5. What do I do? And how do I go about doing it?

Not really, you still need the Time Capsule's device password to configure it remotely. You can disable that feature or ignore the status message, as you choose.

Time Capsule With Windows Problems

Hi,
I have a problem with my TC, i read every thread here and in other forums.
I spent Days and nights try to figure it out but with no luck at all.
I desperate here as i just paid $500 to buy the TC and isn't working.
*The Problem:*
1.I configured my TC many times with all possible configuration, the airport is working fine (LED always GREEN) but whenever i try to access the HDD it gives me: Username/Password Error, Netbios problem (Win 7) OR Semaphore timeout period expired (Win XP)...
2.When I restart the TC or the LinkSys It works one time perfectly but as soon as i change anything on TC or restart the computers cannot access again.
3. I used 3 Laptops to test, i even changed the router but with no luck.
4. Windows search and Minimum LAN Settings as suggested in the forums are changed but with no luck also.
Settings:
1. LinkSys (WAG120N)- Primary Router - connected to TC WAN port via Ethernet Cable.
2. TC Firmware 7.5.1 - Came 7.5 and updated to 7.5.1
3. Dynamic WAN IP, TC in Bridge mode, Static LAN IP (192.168.1.100)
4. TC Conf: Create Wireless Network
5. IP4 Conf is Manual, I put the router address 192.168.1.1 in the router address and in the DNS fields
Please someone help me ....
Tamer

thnx Meherally posted as advised...
moreover, i can access the airport utility perfectly, i can even erase the hard disk.
and whenever i try to access the disk via the ip address, i gives me "Path not found" and when i diagnose this it gives me "the resource \\192.168.1.100 does not accept incoming connection for file sharing"
Any Idea Please?

Time Capsule with WiFi

I have done something during attempting to connect another imac to time machine and have lost all wireless connectivity. IP ports still work. Any suggestions for restoring? Signal strong, Airport only says "No configured AirPost base stations have been found".

James,
You can only connect to one network at a time with any computer...
If you want to connect to their network for the Internet, then you would have to choose their network.
If you want to backup to your TC, then you would have to change from the above network and choose your other TC network... To me, that is a pain in the rear but that is up to you.
Good Luck...
Joseph Kriz

TS1398 I can't connect to my Time Capsule wi-fi with my iPhone.

I recently got internet through Time Warner which I believe is DSL. I connected everything up to my Time Capsule, and the light is green. I got onto my Macbook and updated the firmware for the Time Capsule and am able to get on the internet connected to the Time Capsule with no problem what so ever. I got my iPhone 4 and my iPhone 4s and try to connect to the Time Capsule, I enter the password and all it does is have the loading ring and won't connect to it. On my iPhones I've tried to renew the lease, reset my network settings, turn off and on the wifi, hard reset, turn off the phone normal, and still nothing. On my Time Capsule I've tried to disconnect and reconnect everything, I've tried to restart my modem and reconnect it. It's still the same problem I can connect just fine with the wifi on my Macbook, but my iPhones just have the loading ring and never connect. What can I do?

I had the same issue. Our iphone 4s connected to the time capsule just fine, but the older iphone 4 would not. I turned off the wireless n setting in the time capsule and set it for 802.11b/g only and it worked fine. The time capsule should have negotiated the 802.11g setting for the iphone 4 but it did not. Not a great solution but the g was fast enough to support our cable internet speed of about 25Mbit/s.

Wifi connecting drops on Time Capsule when I sync iMac with appletv

I've had this issue ever since I got my 27" iMac and I can't figure it out.
My setting:
I live in a 3 bedroom apartment. Livingroom is at the right as you go in. Followed by room 1, then room 2 and right before the kitchen at the end is room 3(mine). I Have an apple tv in the living room, a 21" iMac and a time capsule that I use only as an airport base. I also keep a macbook in the livingroom. In my bedroom, room 3, I have my 27"iMac. Everything is connected to the Time Capsule for wifi as well as a couple of iphones and an ipod touch. Everything is updated with the latest software updates.
My problem is that every time I try syncing my apple tv with my 27" iMac, the time capsule looses the wifi connection and immediately starts blinking orange. I have to restart the time capsule by unplugging it and then the wifi connection is restored. For a while now I've been using a 50' ethernet cable that connects the 27" imac and the time capsule with the wifi off on the imac. This is the only way the wifi connection isn't affected when I sync to the appletv. I've tried resetting and restoring the time capsule several times without helping the issue. I also tried all 11 channels on the wifi connection as well as automatic setting for the channel but that doesn't seem to help. I clean installed snow leopard on my 27" iMac as well with no luck. At this time I don't know what to do, any help would be appreciated. I'm really tired of having that cable laying around. Thanks
~C

please read this about possible sources of _*wireless interference*_, which may well be your problem.
wireless signals, if they have to travel over long distances or through obstacles (such as concrete walls or steel structures), will lose power. especially on the 5 GHz band you virtually need +line by sight+ in order to get a clean and reliable signal.
consequently, many users (including myself) resort to hardwired connections where possible. except my two airport express units and my iPod Touch, i have all my equipment hardwired to my TC.
additionally, syncing large amounts of data between devices heavily taxes your wireless bandwidth.
best of luck !
JGG

Time machine ethernet backup to time capsule works, wifi does not

Hi all.
I recently updated my old time capsule to one of the new tall ones ME182X/A with a 3GB drive. I transferred over the backup file of my Macbook Pro according to the Apple instructions (Time Machine: How to transfer backups from the current backup drive to a new backup drive) and whilst connected via an ethernet cable, time machine works fine with the new time capsule.
However, when I disconnect the ethernet cable and connect to the time capsule over wifi, time machine hangs on "preparing backup". I do not get to "xxMB of xxMB" or any error messages. I've tried the following:
reconnecting via ethernet after restarting my Macbook Pro (running 10.9.5) allows time machine to start and complete the backup.
I've tried deleting the ".inprogress" file, as per some websites, but this doesn't solve the problem
turning off spotlight, doesn't help
I have no anti-virus software running
restarting the computer, resetting SMC, restarting the time capsule - no help.
The wifi side of the TC is working perfectly otherwise. I can "see" it with Airport Utility, and mount the drive and explore it without any problems.
Any suggestions?
Thanks again,
John

Here are the steps I would use.. do not connect by ethernet at all whilst you do them.
Factory reset the TC.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup with different names. Short, no spaces and pure alphanumeric. eg TCgen5 as base station name. TCwifi for wireless name.
Make sure the password for disk and wireless etc.. are 8-20 characters pure alphanumeric mix of case and numbers.
Reset TM then to the new drive location.
See A4 pondini for a full reset.
http://pondini.org/TM/Troubleshooting.html
Strongly recommend you also verify the backup and install the Widget.. A5 and A1. The log you get from the widget is a big help to see what is going wrong.
Ensure the ipv6 is set to link-local only in wireless.
I would do the whole lot but you can test at each step if you want.. I just had it happen to me.. first time in 12months and regular posting in this area. Doing the above got me going again.. although it takes a bit of patience to work through the lot.

Time Machine/Time Capsule with ext hard drive backup probem

I installed Time Capsule with no problems. A 1 TB LaCie hard drive is attached by usb cable to the TC. The LaCie is seen by finder and I can open, edit and save files to it and so can the Macbook Pro on my network.
Time Machine backed up my internal hard drive on my Mac just fine, but Time Machine refuses to see the external Lacie drive so it cannot back it up.
Here is the situation:
1. If I go to Time machine preferences and click Options there are no volumes or folders listed as Do Not Back Up. nothing is there.
2. If I click Change Disk the name I gave my Time Capsule is listed as it should be but the LaCie drive is listed also as if it were possible for me to back up to that also. The LaCie's name is there with the name of the Time Capsule in parenthesis. Isn't that odd?
3. When I select the LaCie icon on my desktop and select Get Info in the Sharing & Permissions section it says, "You have custom access" below it says
Name Privilege
(unknown) Read & Write
everyone No Access
I am new to Mac in general and this permission and sharing thing is still a bit mysterious to me so I don't know if these sharing & permission settings are usual or weird and could be contributing to why the back up of the LaCie drive is not happening.
This is the final hurdle I have in absolutely convincing my small but vocal office that switching to Macs all around was a great idea.
Any help would be appreciated.

External hard drives connected to Time Capsule are not backed up by time machine. I solved this by connecting the hd directly to my mac and sharing it. That's not the solution I was hoping for but it will do for now.

Connection printer to time capsule with wifi ... Problem

Similar Messages

Maybe you are looking for