Connection problem between sap bw and EAI

Hi
Please
I'd like to know why people who work on the part of my EAI project say there is a connection problem between eai and SAP BW. He explained that the connection is good at 12h AM and 16h PM the system was disconnected, he receive this error message:
System.ServiceModel.Security.MessageSecurityException: The HTTP request is Unauthorized with customer authentication scheme 'Basic'. The authentication header received from the server was' Basic realm = "SAP NetWeaver Application Server [DB1/100].
I like to know if this is a problem with sap bw (misconfiguration of authorisations) or at the eai.
Cordialy

Hello,
we have 2 possiblities in BW to get data into BW.
1) pull
2) push
I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
and
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
All of these possibilies are decribed in the online help and in howto papers.
hope this helps
Michael

Similar Messages

PI Configuration and connection settings between SAP ERP and peoplesoft

Can someone please share some docs or the link for the PI Configuration and connection settings for the connection between SAP ERP and people soft system. Thanks in advnce
Regards
krish

Hello,
The following links will be helpful in this regard:
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/f3d22f01c741bdb0e62a2f4205411c/content.htm

Connection Problems Between iChat 3 and iChat 4 Workaround

Maybe this info will help others:
iChat 4/Leopard users must initiate video chat to iChat 3/Tiger users:
I have discovered that if an iChat 4/Leopard user initiates the video chat to an iChat3/Tiger user, it works, but if the iChat3/Tiger user initiates the video chat with an iChat 4/Leopard user it fails with a message saying that the receiver declined the invitation (even if the receiver tried to accept). This happens on a LAN as well as across the Internet.
Likewise, to make conference video chats, make sure the iChat 4/Leopard user initiates, then adds the other parties.
This post is NOT about iChat Server, although the problem occurs there too. If you are using iChat Server (part of OSX Server) see http://discussions.apple.com/thread.jspa?messageID=5995966 ).
Hope this helps.
ppj

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

Connection Problem between BiW Server and BPC Server

Dear all,
Situation,
We have a CSV file dumped in BI Application server in directory defined by us for all Transaction data. Now this CSV file needs to be moved to BPC Server.
Connection/Link between BI and BPC server is missing. So we need one link between BI and BPC server, so that we can automate the movement of CSV from BI server to BPC server.
Is there is any Tool from which can establish connection between two.(i.e. BiW and BPC server).
OR
Do we have any alternate solution of Transfering Transaction data from SAP R/3 or BiW Server to BPC Server.
Thanks in advance
Hardik

Hi all,
I installed the Content Server with DB instance. ECC on AIX and the Content Server on Windows are on different domains and wanted to integrate. After the installation what I did is as follows...
I am trying to create the Content Repository using the Tx- OAC0, given the the following details as
Content Repository name--- DMS_xxxx
Document Area - DMS
Storage Type -- HTTP Content Server
Version -0046
HTTP Server --- fully qualified host name of the Content Server
Port Number --- 1090
HTTP Script --- ContentServer\ContentServer.dll
Physical Basic Path--- (initially) -
/usr/sap/<ECCSID>/SYS/global/
(modified) --- E:\ContentServer\ -
not available, thought it will create, even created later
Physical archive path --- SAME as Physical Basic Path
When I check the connection, I am getting an error "Content repository DMS_xxxx does not exists.
When I check Tx- CSADMIN-- it gives an error saying the "HTTP error : 4010 (authorized) ' Permission denied: adminContRep&configSet"
I am not sure what user should i use for this and what should be the information of ContentStorageHost, ContentStorageName and Storage need to be provided.
Please help me in this....
Regards
Krishna

Bluetooth connectivity problems between Macbook Pro and iPad

Good afternoon All,
I am having problems sending files between my macbook pro (retina display) purchased today and my ipad (also purchased today).
They will connect and pair, but when attempting to send a file my macbook will tell me that it is not possible due to "The device does not have the necessary service."
Anyone know of a cure for this problem?
Thank you!

Bluetooth in iPad was designed only to work with keyboards, earphones or speakers. It was not designed to, nor will it work as a file sender from one device to another. Either sync the files to your iPad from your Mac via iTunes sync, or email them, or get a cloud service like Dropbox on your Mac and then download the Dropbox app on your iPad. Put the files in your Drobox account on your Mac, then access them via the Dropbox App on your iPad.

Wireless Connectivity problem between BT HomeHub and AirPort Express

Hi Guys,
I'm new here, and have just bought my 1st Apple product!
I'm afraid I haven't had a very good start though, and would really appreciate some assistance please.
My problem is with connecting my Apple AirPort Express ("APX") to my BT HomeHub ("BTHH") wirelessly, whilst also being able to use the internet. I can only get the internet to work, whilst also streaming music from itunes to APX, by connecting the APX to the BTHH via an Ethernet cable. Perhaps I should state my equipment:
*Room #1*
Computer: Laptop
Operating System: Windows XP, Service Pack 2
Modem: BT Homehub (the curved version with blue lights)
Above Connection Method: Wireless.
*Room #2*
Hi-Fi (Linn)
Apple AirPort Express
Above Connection Method: Digital (mini to regular toslink).
*What I Want:*
- To be able to wirelessly connect to the internet (PC to BTHH)
- To be able to wirelessly stream music to the APX from iTunes
- to be able to do both of the above simultaneously.
Problem:
Once my laptop has found the APX network, as soon as I then connect to it, my BTHH internet connection disappears. or the APX disappears and I have to do a factory restet before my computer can discover it again. (It leaves me having access to only one network or the other). Hence, I cannot stream music to the AirPort and use the internet simultaneously. One or the other. I am trying to "Join an Existing Network" via the AirTunes software.
Very depressed as I don't know much about networking and had hoped it would just configure automatically. I have fiddled but it always loses the presence of the AirPort altogether until I do a factory reset for it to reappear as an available wireless network again.
Please please help a struggling newby - anybody got an idiot's, step-by-step guide to the perfect settings? thank you to anybody who can assist.
Message was edited by: kerrnice

Is no one able to help me please?

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

That is not possible.

Connection mode between SAP and PI

Hi Experts,
i now have the below question.
we know normally there are three ways of connection between SAP ECC and PI.
1. proxy
2. RFC
3. IDoc
then what is the connection mode for these three connections?
eg. ABAP connection, HTTP connection, TCP/IP connection?

Hi Aditya,
As far as I know:
1. proxy    uses type 3 connection (ABAP)
2. RFC       uses type T connection (TCP/IP)
3. IDoc      uses type 3 connection (ABAP)
However, let us wait for the response of others.
Regards,
Mark

Connection Between SAP GTS and Legacy systems

Hi GTS Experts,
Could you please let me know how to connect between SAP GTS and Legacy systems.
This is for transfer of Customers, Vendors,Materials(Products in GTS),Transaction Data.
Could you please provide any documentation on this and is it PI team will do or functional guy.
One more question:
Customer created a sales order with sold to and ship to(both contains same address) in legacy system.
Then it will be sent to SPL screening in GTS.
Now he will change ship to address and this should not be passed to SPL screening-- how to do this.
Regards,
Murali

Hi Murali,
Apart from what Dave mentioned as above, although there is no such document available apart from SAP Standard content document but its something that is very standard to other modules as well.
Actually, you need to have a middle ware like SAP PI or any non SAP Product between SAP and Non SAP Legacy system. Also, mapping should be defined well in advance in this. Then it will also involve the EDI at the SAP GTS system end and Web skills( or applicale connection skills) at the Legacy system end to ensure appropriate mapping and interchange of realistic data.
Here, I would like to know if your legacy system had already some SAP system connected to it?.
Regards,
Aman

Establishing a connection between SAP SRM and MM

Dear All,
I am working for a multi-national company and now we are thinking to implement SAP SRM but I have some questions about communication between SAP MM and SRM. Firstly I want so share with you our as-is status and then my doubts and question that I have.
In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this two sap system mostly codes are and descriptions are different for all materials and now we want gather all data and we want to have one global code system and (local code also will remain). I mean we want to call same materials with one global unique code instead of two different codes. We are thinking to implement something like coding center that will take local master data from local organization then will assign global code, update table then with somehow will update SAP SRM.
For example:
We have local master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
I am thinking to develeop a tool (excel,access etc.) that will take new item creation manually or auto from local organization then will assign a global code and category then will update SAP SRM automatically
Regarding to tool I have some questions:
1)     which are the standard communication channel between R/3 and SRM or How they can speak with each other ?
2)     Is there any standart batch file (BI or BAPI) to be able to perform this.Is it possible to develop tool using excel or access etc. which will manage coding task.
3)     When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
4)     how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
5)     standard program (transaction) for aligning available ?
6)     ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
7)     Where the translator (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
8)     How we can build the communication transaction?
Thank you very much
Any comments and answers will appreciated and rewarded
Regards,

Hi,
Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
Cheers
Rob

Step by step procedure to establish connect between SAP APO and SAP PI

hello All,
Can any one provide me link or step by step procedure to establish or exchange messages between SAP APO and SAP PI.
Thanks
Rajeev

Hi,
>>>Can any one provide me link or step by step procedure to establish or exchange messages between SAP APO and SAP PI
sure
a) if you want to use idocs
http://www.sappress.com/product_basic.cfm?account=&product=H3059
b) if you want to use ABAP proxies
check out blogs on sdn on ABAP proxies
only those two are used
Regards,
Michal Krawczyk

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Wireless connection lost between my router and printer (hp officejet 4620)

My hp officejet 4620 printer has been working fine but now the wireless connection has been lost and I can't get the wireless connection back. The blue light for the wifi flashes blue. I can't get the connection back between the router and the printer because my wifi is actually working fine with my laptop. Any suggestions about what i can do to get the connection back so I can print again?
Is it something I need to do on the printer screen or laptop to fix the problem?

Have you powered off everything and power up again? Power off printer and router. Power on router and wait 2 mins. Power up printer and see if it connects to your SSID.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT1222 ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : Bambangtjio@yahoo.o.id) Thanks

ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks

Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

Connection problem between sap bw and EAI

Similar Messages

Maybe you are looking for