Connection-problem Notebook- APExpress- NAS
Hey guys,
My problem is that I can not access the NAS with my notebook.
The airport express is configured as following:
firmware version: 7.6.3
Wi-Fi:
sending mode: automatic; 802.11a/n-802.11b/g/n
channel: automatic
security key type: personal WPA2
Internet:
Internet-Connection:
Connect via: Ethernet
using connection together (don't know if this is the right translation): off, bridge-mode
TCP/IP:
IPv4: manual
IP-adress: 192.168.2.164
Subnetting reference (hope it is the right word): 255.255.255.0
Router adress: 192.168.2.1
DNS-Server: 192.168.2.1
Music:
AirPlay activated
advanced:
IPv6:
IPv6-mode: only link-local
my notebook OS is windows8
I think maybe the ethernet-port of the APExpress is deactivated but I am not sure. I googled for hours and tried different settings but I didn't find a solution. I hope you can help me.
Sincerly
stuetzi96
Sorry for my bad English but I am a native German Speaker
I
Based on your provided diagram, the router would be providing IP address for all network clients connected to either the router or to the Express. What is the make & model of this router?
It is a "linksys broadband router wireless g 2.4 ghz". Yeah the router provides the IP adresses.
I don't know if it is important but the router and the APExpress are connected via two dLAN adapters from devolo.
Similar Messages
-
Since I updated firefox to 29.0.1 on my desktop, I am unable to access my email account at Yahoo.com from my ASUS notebook. "Connection problem" pops up when it tries to get new mail. I was getting mail on the ASUS on 3/12/13, but starting today I get that message and no new mail comes to the ASUS.
I deleted the account on my ASUS email at settings. The ASUS appeared to delete the Yahoo email account, but when I clicked on the shortcut, my yahoo email had updated and everything looks good.
Thanks for your suggestions! -
Bluetooth Connection Problem Logitech V270 Cordless Optical Notebook Mouse
I just start using the Logitech® V270 Cordless Optical Notebook Mouse for Bluetooth with my Ibook g4. The Ibook has internal bluetooth module installed. The mouse is easy to install. It pairs with the computer and both buttons and scrollwheel works.
However the Bluetooth connection gets lost occasionally. Most of the times it reastablish the connection quickly after. I think this is strange as the mouse is always near my iBook.
Does anyone has an idea how this problem can be solved? Or what might be the cause of this bluetooth disconnection? The mouse doesn't need drivers for operation on a mac. Some people have the same connection problems?I have use the same mouse and I have never had a dropped connection. Have you tried replacing the batteries in the V270 to see if that might avoid the drop out?
-
Is there a way to connect to Synology 212j NAS through router?
Since I upgraded from Mountain Lion 10.8.5 to Mavericks OS X 10.9.1 I cannot connect my Synology 212j NAS via my router.
Diskstation/iMac Works fine when connected directly with ethernet cable. When connected via router with ethernet no connection is possible.
find.synology.com does not find the NAS, the synology assistant finds the NAS, can configure the IP address, but displays "connection failed" at the end of the process.
When wifi is enabled I can share files through finder. At no point am I able to display DSM configuration interface at 192.168.1.XXX:5000.
All firmware up to date, all devices reset and rebooted several times
The router lists the diskstation IP address in devices (in router configuration ui)
Tried fixed IP and DHCP
Tried port forwarding all services
MacBook Air with Mountain Lion 10.8.5 connects flawlessly to diskstation.
I think there is a problem with the way the IP addresses are being managed between Mavericks OS X and the router is there a way to work around this?dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634 -
2504 controller + 2602 APs = wireless clients connectivity problems
Hello, everybody!
I have a connectivity problems of wireless clients. The symptoms are:
1) Some clients receive 169.254.x.x., instead a correct DHCP addresses, less in a minute connection drops, and in controller's "Monitor" > "Clients" tab these clients are marked as "Excluded".
2) Most of the clients receive the correct addresses from DHCP (192.168.2.x), but also loose connection soon.
3) Wireless clients with correct addresses can't ping each other, gateway and an address of the controller's dynamic interface (all of them are in same subnet).
4) And the most suspicious problem is that some machines are unable to connect to APs after several attemps to do that. I mean, I configure controller and change some options, trying to understand, whether they were applied or not and constantly connect and disconnet certain PC to the SSID. After five or ten attempts I can't connect to the SSID. During these attempts, the others PCs stay connected, without interruptions, and they could be reconnected again. It's like some kind of port security works, but I'm not sure...
Do you have any ideas which options should I configure?
My configuration:
I have three interfaces on the controller: virtual, management (default) and dynamic (it is set to the WLAN)
I have one SSID, WPA/WPA2, AES/TKIP, authentication PSK.
My clients are a/b/g/n, all are permitted on the controller. No custom security policies were applied.
All the devices are in a single room: controller, one AP and different clients: desktop, notebooks, iPad, Nokia Lumia, etc.
I have an internal DHCP Server on the controller and it works perfectly well.
I can provide all the screenshots required from web-interface of the controller...
Many thanks in advance for all ideas that you have about these problems...Hi, there!
The problem was solved.
1) APIPA address receives only single machine with Win8 - I think there are some firewall issues
2) Other devices have been loosing connection because they were mobile devices, like iPad and Lumia. If you keep working with it, it doesn't drop the connection
3) The dynamic interface address and gateway address were inaccessible because i had not used an appropriate port on the controller. =)))) Firstly, it was just a guess, but it proved.
Now, everything works with WPA2, AES, PSK...
It is a very good day!)
The only question remains: why I can't connect machines, which have a static IP? During the controller initialization, I said "yes" for permitting static IPs...
Guys, many thanks for your help! -
Can't connect to my LG NAS after downloading LION
Hi all - first post.
Can't connect to my LG NAS after downloading LION. Basically thats it, since downloading Lion for some reason I can't access my NAS. Anyone got any suggestionI have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you. -
hi, we have a wirelss router G wrt54gs and a wirelss b notebook adapter for the lap top. a short time ago while using lap top linksys shut down and wouldnt re-open , kept saying it didnt exist, i find that odd from surfing ok to nothing on a few mins.i tried to un-install linksys so i could reinstall.control panel told me it had been uninstalled but it was still showing , when i put the disc in it wouldnt auto run so i went in through my comp , clicked set up and it told me it couldnt install as something was already installed, its just taking me round in circles...with a bit of advice i searched the files /folders and eventually got a connection, problem is now i dont have the status page which shows when your connected and what network. im at a loss now and really need some help on how to get the whole lot out so i can re install , how to get this status page back, and now it drops its connection every few mins.and to top it all im not exactly sure if and when it is connected if it is secure...
go to start -> programs -> linksys wireless-b notebook adapter and click uninstall
if no luck, from here as well....seems that the program has gone into the registry of the laptop and u need a registry cleaner program to get it uninstalled properly.... -
HOME LAN CONNECTION PROBLEM
I set up a 2 unit home net with a Linksys WRT54G Router, One PC hardwired to Port 1 and a Notebook conected via the wireless port. Both PC are Pentium and WXPPRO.
When I try to browse the local workgroup ("MICASA") I get the following error message: "You have no access to "WorkGroup". You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server list for this workgroup is not accessible at this moment."
Wireless has MAC filter enabled and security disabled
I restricted DHCP adresses to only 2 => 192.168.1.100 and 192.168.1.101
Win XP Pro Firewall is disabled in both PC
I worked as ADMIN with proper password in both boxes. Full file security enabled.
Shared both C disks with proper local and share permits.
In registry both PCs have: HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa/"restrictanonimous"=0
I could see both PCs in "my network places" for a couple of days, with full and proper file sharing, and then both pc's dissapeared. Both PC's access internet properly.
The obnoxious message listed at the beginning began appearing when I click "Workgroup" in "my network places". I tried everything, including unsetting and re-setting file sharing for C disks. Nothing happens.
The W2K Resource Kit Browser Monitor reports no brouser on the LAN.
I can ping one adress from the other and I can log onto the other box shares by typing the name in Windows Explorer (\\Pentium or \\PCdeLidia)
Any clue will be welcomeThank you, timelord.
I checked the Node setting (ipconfig /all) and it is "broadcast".
So, I decided to start all over again.
1) I un-shared all shares in both computers (The notebook and the desktop).
2) I reset the linksys router and used the Linksys setup wizard to reconfigure it from 0 (cero) - dropped (disabled) ALL security - Left only admin setup password - Changed the workgroup SSID from "MyHome" To "Home" - just to be sure.
3) Run network setup wizard in desktop (WXP Pro). Sharing Printers and files enabled.
4) Stopped and Disabled the WXP firewall in the Desktop (it was disabled, but the network wizard enables it and leaves it running)
5) Rebooted the Desktop
6) At this point, I finally could browse the local lan and see my desktop listed
My Network Places / All the Net / Microsoft Windows Network / "Home" / "Pentium" (my desktop)
7) Went over to the notebook and re-checked all file-sharing was off, then I erased the WI-FI profile in it (uses the Intel wizard), changed the workgroup name from "My Home" to "Home", Rebooted it and connected it to the Wi-Fi "Home" net that was detected. ALL security disabled, including WXP Firewall.
8) Now, the whole net is visible from both PC's
My Network Places / All the Net / Microsoft Windows Network / "Home" / "Pentium" (my desktop)
My Network Places / All the Net / Microsoft Windows Network / "Home" / "PCdeLidia" (my wife's notebook)
9) I enabled a couple of shares in both machines and I could browse them and connect to them
10) Finally, all goes to hell: I shut-off both PCs and the LinkSys router. Then I powered the linksys, and then the Desktop. The notebook still OFF. And Voilá, same awful post:
"You have no access to "WorkGroup". You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server list for this workgroup is not accessible at this moment."
I'm not even able to see myself.
One tip: I used the browser monitor from W2K. Before, I was able to see 3 (three) lines listed, no browser. Unfortunately, i did not write it down. Now I can see only the following 2 (two) lines:
MiCasa \Device\NetBT_TCPIP_ {€ unknown (Not an Euro sign, something like that)
MiCasa \Device\NwlnkNb unknown
Now I have to quit, no more time, I'll continue later and keep you posted
Thank you again -
Rocketfish webcam connectivity problem
I have a (Best Buy) Rocketfish Notebook Web Camera RF-NBCAM which comes with its own software: Webcam Monitor. I stupidly downloaded macam version 0.9.0 and now my Powerbook won’t recognise that a camera is connected in any programme except Webcam Monitor (eg in Skype and ichat)... I think there is a connectivity problem, but don't know how to rectify it. I have tried to uninstall all the programmes and reinstall Webcam Monitor and Skype to no avail. I would really appreciate advice. eg. are there preference/configuration files lurking that might be looking for macam, and if so how do I access them? Thank you!
powerbook g4 Mac OS X (10.4.8) 1.67 GHzDid you install http://www.ecamm.com/mac/iusbcam/ to get the cam to work.
-
Connection problems, computer Locked
hello
I'm having a lot of trouble connecting with iCloud, Apple id, idAdobe, etc. . . . I can not go into Apple Store and I do not work Safari
If I enter www.icloud.com, I can see my devices and the MacBook Pro appears as "locked"
Can someone help me out?
Thank you so much
MacBook Pro - Yosemite 10.10.3
MacMini - Yosemite 10.10.3As far as I know Wireless USB is not offered by Toshiba so if you have connection problems either contact wireless USB manufacturer or your internet provider.
Check also all WLAN settings on your notebook and router (if you have one). I am pretty sure your described issue is related to some wrong WLAN settings. -
WLC 2504 Connectivity Problems
This is a tricky one.
I installed a 2504 WLC with three AP's. Two SSID’s were configured, one with WPA2/AES-TIKIP and the other with Web Auth.
After installation, customers could connect to WLAN without problem and .
The problem that is occurring is that since the beginning of week, customers PDA's, cell phones and iPad and cannot access Internet with any of the two WLAN but clients who used laptop have no connection problems. Also the DHCP Server is assigning IP's correctly.
This problem also occurs with test SSID I created which is Open Auth. I see associated Cell phones and IPAD to the WLC but none of these answers ping from the WLC.
This is a WLC 2504 with IOS 7.4.100.Hello everyone!
Today I did a test with my Cell phone Samsung Note 2 and I have the same conectivity problem.
I have installed the APK ipconfig from the Play Store for Android in my cell phone and y see that I getting IP Address, Mask and Gateway.
This is what I´ve got from the APK:
IP ADDRESS 192.168.8.181
MASK: 255.255.255.0
GATEWAY: 192.168.8.2
DHCP SERVER: 192.168.8.16
DNS1: 192.168.6.16
DNS2: 192.168.2.16
I have connected my laptop to the WLAN with no issue and I´m getting this:
The IP address of the DHCP Server is 192.168.8.16 and 192.168.6.16 and is a Microsoft Server.
I´ve created a test WLAN with OPEN AUTH but the problem remains.
Here is the OUTPUT you requested:
show wlan 1
WLAN Identifier.................................. 1
Profile Name..................................... APS-PT-01
Network Name (SSID).............................. APS-PT-01
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 16
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... APS-Admin-WLC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show w?
wgb wlan wps
(Cisco Controller) >show wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... APS-Visitas-PT
Network Name (SSID).............................. APS-Visitas-PT
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 1
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... APS-Admin-WLC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled
IPv4 ACL........................................ Unconfigured
IPv6 ACL........................................ Unconfigured
Web-Auth Flex ACL............................... Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional but inactive (WPA2 not configured)
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Disabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
(Cisco Controller) >
(Cisco Controller) >show wlan 3
WLAN Identifier.................................. 3
Profile Name..................................... Prueba
Network Name (SSID).............................. Prueba
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... APS-Admin-WLC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Enabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Disabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Enabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Disabled
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Disabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
Internet connection problem with MacPro, only. PC fine
I have a Netgear 600n. My notebooks, Vista PC and MacPro, are connected to it. There is no connection problem with the PC, but there is with the MacPro. Weekly, I have to delete the "system configuration file," or it keeps dropping the connection. I heard it had to do with Windows configuring the netgear router. is this true and is there a solution. I use the PC and the Mac at the same desk, so there is no location issue.
Thanks!!Some operators block the option to use your phone as a modem, as this will use up a lot of data. It might be worth checking your contract to see if it mentions anything about data use, or give your operator a call to see if they have any limitations.
Please try to use the phone with a different SIM card to see if this is related to your operator after all, or if it's something else. If it doesn't work with a different SIM card either, try the following to see if the issue lies in Nokia Suite or in the phone itself:
Install Nokia Suite on a different computer or laptop and check if you can use your phone as a modem on that computer. If this works, try reinstalling Nokia Suite on your current computer and see if this makes a difference.
If this doesn't work, try connecting a different Nokia device to Nokia Suite and try to use it as a modem. If you can connect a different phone with your SIM card to the modem but connecting with yout 6700 Classic fails, then please visit a local care centre where your phone can be checked on any errors.
You can find a care centre by going to your local Nokia web page and clicking on Support.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too. -
Timeouts and connection problems after 5.1(2) upgrade
AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?I don't know specifically, but I did notice that 5.1(3) was released today.
-
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
RFC Receiver adpater Connection problem , Help us to solve ?
Hi Friends ,
Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given <b>Maximium connection property to 1</b> .
While multiple set data passed to rfc will connection problem will come ?
Most data not uploaded . I am getting the following error.
<b> If i set max connection to 5 . It is 5 times or more than that it is pusing the data .</b>
i am getting the following error <b>while i set the Max connection to 1 .</b> . <b>Any other place i need to change configuration ?</b>
<i><b> - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.</b></i>
Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan<b></b>
Message was edited by:
ranga rajanHi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
Akshay Jamgaonkar
Maybe you are looking for
-
How to remove the display of DECIMALS in ALV? Any Falg?
Hi Experts, One simle dount that, I am getting some values in some fields as 12.34; 11.22 etc - 2 decimals, but, am looking to hv as 12; 11 - NO DECIMALS. So, I looked any flag in Fileds catalog, Lay out in SLIS, but, did not find any flag? now, am g
-
Pls fix this in my title And why dont you support mirroring in other devices than ipad 2 And in ios 5 it keeps crashing
-
Volume too low on 6300, and listening to podcasts
I believe this question has been asked so many times, but is there ANY way to make the allowable volume any higher on headsets? I'd like to listen to music while riding my bicycle and even the sound of the damn tires on the road is louder than the ma
-
Best settings for music collection
Best settings for keeping your Itunes music collection nice and organized? I dont like the setting that has 2 sets of folders and 1 of them all folders are empty.
-
how do i right click on mouse