Connection problem with my nokia 6230i

I try to connect my nokia with a nokia cable to my computer. I already did this on my mobile without any problem. When I try to do the same on my desktop I receive the following message :
there was a problem during the installation of your material nokia 6230i
this name is already in use as a service name or service name for display.
What can I do? Thanks for your help

My guess is you need to reinstall your drivers.
This is a pain, but not too complicated.
- first, un-install everything Nokia-related from the PC via Contol Panel - be sure you include the Cable drivers!
- restart the computer (yes, really)
- install PC Suite as normal*
- restart the computer
* NB: it is VERY important that after you're prompted to plug in the phone during the PC Suite installation, you WAIT until ALL of the drivers are installed.
This will take AT LEAST 2 or 3 minutes, probably longer.
If you interrupt this process, you will get your connection problems again.Message Edited by patc on 14-Nov-200702:23 PM

Similar Messages

Wifi connection problem with my nokia X7

i have nokia X7 for almost 3 weeks at first i can connect to wifi and can brows to internet but now after a week i can still connect to wifi but when im trying to brows or open internet i cant connect?
and when i check status connect it says (inactive) i do restore the factory setting but still the same problem can someone from nokia can help me to solve this problem?

hi ajaydavidson,
thank you for ur Assistance, i follow ur instructions
settings>connectivity>settings>destinations in that you will find the Wifi access point in might be in the internet option tap the Wifi access point then options>advanced settings>ipv4 settings in that make sure that the number is present.
in IPv4
Phone IP address
Automatic
DNS address
Automatic
when i open/tap IPv4 i only see 0.0.0.0 and i dont know what to do next, help pls?
looking forward to hear from you soon
thank you
leajas

Nokia X6 connection problem with ovi suite

I had recenly bought a nokia x6 16gb and I have connection problem with my ovie suite.I am using cable to connect to the pc.When I open my ovie store it says connect ur device under the ovie suit toolbar. And I connect it but it actually worked but it work for about 5sec and it auto dissconnected.I had tried reconnecting it but turn out the same.But when I am using my laptop and I connect it using Bluetooth it work (ONLY FOR TRANSFER SONG AND PHOTO).I cant update my phone software because I am using bluetooth.I also tried using cable to my laptop but it is same like how I connected to my pc.I am using Windows XP SP2(PC).Thank you for those who helped me and spending time reading it.(Reason=Because I wanna update my phone Software).Again Tks

Hi PhoneNerdies,
Firstly, I recommend to update your Windows XP to Service pack 3. Nokia Ovi Suite do not support fully the XP with service pack 2.
Then use the latest Ovi Suite available, current version is 2.2.0.245 and available from Nokia.com and Ovi.com download pages. You Ovi Suite version you find from help menu and About the Ovi Suite tag.
Then update your X6 to the latest SW available.
After these steps your X6 would work fine.
Regards
HHaapis

I am experiencing some problems with my Nokia 701

I am experiencing some problems with my Nokia 701.
1)While updating OS with Nokia suit its restart then phone becoming dead and need to remove battery and insert it again in order to work and i need to run without completing full update
2)I am getting "Memory full please some applications and try it again" while watching videos after each 5-10 mins where as no apps are running in the background.
3)Getting System error while loading any apps from Ovi Suit or Nokia Store after Downloading
4)Disconnecting automatically from ovi suit apps and many times not connecting with the apps while usb is still connected and ovi suit option is selected from the phone .
5)Cant download any apps from Nokia store web page getting "Downloading error)
6)Some time apps are closing automatically
7)Camera at low light without flash is not working well more bad than 2 mp Rs 3000 phones
8)Many other problem with Nokia Suit
9)Sound is too low with loud speaker lower than any other smartphones even lower than other's Nokia 701.
And its my first smartphone from Nokia
Come on Nokia please help me out

If an update failed, but you can still access the phone, do a reset. Dial *#7370# followed by 12345 if required, the phone will set to out of the box, but you'll have to set it up again manually and reinstall your apps. Before doing this, connect to Nokia Suite and update to the latest available software, then set up, you should then find everything works fine.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Internet connection problem with MacPro, only. PC fine

I have a Netgear 600n. My notebooks, Vista PC and MacPro, are connected to it. There is no connection problem with the PC, but there is with the MacPro. Weekly, I have to delete the "system configuration file," or it keeps dropping the connection. I heard it had to do with Windows configuring the netgear router. is this true and is there a solution. I use the PC and the Mac at the same desk, so there is no location issue.
Thanks!!

Some operators block the option to use your phone as a modem, as this will use up a lot of data. It might be worth checking your contract to see if it mentions anything about data use, or give your operator a call to see if they have any limitations.
Please try to use the phone with a different SIM card to see if this is related to your operator after all, or if it's something else. If it doesn't work with a different SIM card either, try the following to see if the issue lies in Nokia Suite or in the phone itself:
Install Nokia Suite on a different computer or laptop and check if you can use your phone as a modem on that computer. If this works, try reinstalling Nokia Suite on your current computer and see if this makes a difference.
If this doesn't work, try connecting a different Nokia device to Nokia Suite and try to use it as a modem. If you can connect a different phone with your SIM card to the modem but connecting with yout 6700 Classic fails, then please visit a local care centre where your phone can be checked on any errors.
You can find a care centre by going to your local Nokia web page and clicking on Support.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Memory problem with my Nokia 3220

Hi,I am new here and I have a memory problem with my Nokia 3220.I deleted all of my stuff in galery exept the BlueSquare theme and Nokia Tune but it says that i only have 483kb free memory and galery has 1,7mb memory taken. What should i do ?...I hope you understood my problem and i hope you can help me!
Shibuy
Thank You!!

I have the same problem recently. I bought my nokia 3220, 3 years ago and all was ok but now I download some free themes from a web site and suddenly I realized that my cellphone has less memory. In the phone options says that I have 2,2 MB in my Gallery when actually I have only 800 KB in my Gallery. I don't know what happen!! Maybe it's a virus or what is the solution?? Can I restart the cellphone ?

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

Connectivity problems with Windows 7

I have connectivity problems with a Windows 7 machine. It's just lose the wireless connection from time to time, usualy "forgeting" Default Gateway. Any ideas? Please not the same machine did work very well on previus router: the problems did start after I installed Time Capsule as the main gateway. Thanks a lot.

Make sure you setup the TC with SMB compliant names.. short .. no spaces.. pure alphanumeric.
Use fixed channels.. not auto. Set a different name for 5ghz so it doesn't get mixed up between bands.
Check you have the latest drivers for the particular wireless card in the PC.. eg if a laptop don't download drivers from the laptop manufacturer.. get the ones from the wireless card.

Problem with a nokia 5310 xpress and a bluetooth

i have problem with a nokia 5310 xpress and a bluetooth!i can transfer anything from my phone to pc with or without pc suite! but when i want to transfer files from pc to phone i doesen"t work! with pcsuite soethings work but very slow! i want to transfer files witout pcsuite !
the blue tooth adapter it is dongle and it the software that i use is BlueSoleil 2.6.08
CAn anyone help me?

I'm having bigger problems...
the screen goes all white and off after a lil while....
Not even the vendor could do anything....

Having connectivity problems with itunes

Hi i'm having some connectivity problems with itunes i can open up the itune folder on my desktop but it will not connect to the itunes store,
Any ideas of how I can get round this both my laptops will connect but not the desktop and of course thats where all the music is

This forum is for troubleshooting compatibility issues between Macs and Windows. Please post your question in the iTunes discussions:
http://discussions.apple.com/category.jspa?categoryID=150

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

I finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

i finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

In the iPhoto preferences verify that yo have the correct print products country selected.
Do you have any firewire software such as Little Snitch?
Is your internet connection working ok?
LN

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Any wifi connection problems with new Macbook Pro 13" models?

I currently use a 15" Macbook Pro (about 3.5 years old) that has intermittent WiFi connection issues (intermittently loses signal). This seems to have been a very common problem with this laptop model. My kids, who use Macbooks, have no connection problems. In any case, I'd love to buy one of the new model 13-inch Macbook Pro's but hesitate because of my many issues with WiFi connectivity on my older Macbook Pro. Just wondering if anyone is experiencing connectivity problems with the new model?

I've never had Wifi connection problems with a Macbook and now with the 13" MacBook Pro I was flabergasted when I took my MacBook down the street to a coffee house with free WiFi. I went to connect to their WiFi and found my own WiFi connection listed. I thought this odd even though I was on the same block as my apartment, my apartment is six stories up. I connected to the Coffee Shop WiFi but it was really slow so I wondered if I could connect to my own home connection. I switched it over and lo-and behold I did connect! It was a good 300 feet away! I NEVER saw this with previously owned MacBooks including the black MacBook and the MacBook offered just before they moved the MacBook up to the Pro series.
So I'd say they have improved the WiFi nicely.

Connection problem with my nokia 6230i

Similar Messages

Maybe you are looking for