Connection problem with wlan router wrk54g

Hi there,
i have tow lenovo notebooks with similar equal systems and vista and same network adapter,
now the problem:
i set up the exact same wlan connetction with the right wep passcode but one notebook got the connection the other not.
the notebook with no connection has only "limited connectivity" and the dhcp seems not to work for this notebook.
i also retried a lot of times to reenter the 64bit 10 hex digits but not successfull.
the firewall settings are ok.
could anybody help?

if the problem laptop has windows xp sp2 , then try this command on the DOS prompt
netsh winsock reset catalog

Similar Messages

Connection problems with WRT54G Router PLEASE HELP!!!!

Hello all,
Im having a huge issue and im hoping that someone can help me. Awhile ago i changed what i believe to be my router settings using 192.168.1.1 and i believe i added WEP secuirty. I changed my password i know that much. Anyway my problem is this - When i try connecting a router to my computer, i cannot access the internet OR the 192.168.1.1 setup. I just get a yellow caution sign on my wireless settings (running Windows 7), but when i connect my cable modem (Comcast) to my computer, i can access the internet. I have reset both the router and my cable modem MANY times (hard resets) and STILL cannot get the setup page for the router. I have TWO WRT54G rourters and BOTH do the same thing when connected to my desktop , yet BOTH work fine on an old machine running XP, so it is something i did with this computer. Can someone please help me solve this issue? any hlep would be appreciated as i am stumped and do not know how to fix this and cannot use WI-FI or my Xbox 360 until i can fix this..Thanks.

Check the IP address of your computer and see if it's in range with the router's IP.
To learn how to do so, click here.

Connection problem with EA3500 router

System consists of cable modem connected to EA3500 dual router and also have a Linksys range extender. Have several wireless devices including desktop PC, cell phones, and tablets that all connect to wireless network without any problem. Have password set up on system. Having a problem with one Acer laptop - when I view my wireless connections I can see HOME and HOME-EXT and it will connect fine with the EXT (range extender) signal but will not connect with the base router that is shown as HOME even though the home connection shows a stronger signal that the ext link. Have checked to make sure that router password is correct - laptop will sometimes connect to HOME for a few seconds and then display "limited connection"
No problems with wireless connections with any other devices. Have rebooted everything in the system with no luck.
Have also tried deleting HOME connection and then reconnecting it.
Any suggestions?
Thanks for any help that anyone may offer.

On the laptop did you try to forget the HOME network and reconnect?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Problem with rg60se router

I have problem with this router, when I connect to the internet wirelessly it works fine but when I try to connect my pc to router via cable I can't connect to the internet. maybe someone can help with this problem.

>> Posting Guide <<

Connectivity problems with Windows 7

I have connectivity problems with a Windows 7 machine. It's just lose the wireless connection from time to time, usualy "forgeting" Default Gateway. Any ideas? Please not the same machine did work very well on previus router: the problems did start after I installed Time Capsule as the main gateway. Thanks a lot.

Make sure you setup the TC with SMB compliant names.. short .. no spaces.. pure alphanumeric.
Use fixed channels.. not auto. Set a different name for 5ghz so it doesn't get mixed up between bands.
Check you have the latest drivers for the particular wireless card in the PC.. eg if a laptop don't download drivers from the laptop manufacturer.. get the ones from the wireless card.

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Internet connection problem with MacPro, only. PC fine

I have a Netgear 600n. My notebooks, Vista PC and MacPro, are connected to it. There is no connection problem with the PC, but there is with the MacPro. Weekly, I have to delete the "system configuration file," or it keeps dropping the connection. I heard it had to do with Windows configuring the netgear router. is this true and is there a solution. I use the PC and the Mac at the same desk, so there is no location issue.
Thanks!!

Some operators block the option to use your phone as a modem, as this will use up a lot of data. It might be worth checking your contract to see if it mentions anything about data use, or give your operator a call to see if they have any limitations.
Please try to use the phone with a different SIM card to see if this is related to your operator after all, or if it's something else. If it doesn't work with a different SIM card either, try the following to see if the issue lies in Nokia Suite or in the phone itself:
Install Nokia Suite on a different computer or laptop and check if you can use your phone as a modem on that computer. If this works, try reinstalling Nokia Suite on your current computer and see if this makes a difference.
If this doesn't work, try connecting a different Nokia device to Nokia Suite and try to use it as a modem. If you can connect a different phone with your SIM card to the modem but connecting with yout 6700 Classic fails, then please visit a local care centre where your phone can be checked on any errors.
You can find a care centre by going to your local Nokia web page and clicking on Support.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

Problem with Advanced Routing in WRT320N

Hi, everybody.
First of all, sorry for my poor English.
I've a problem with Advanced Routing in router. My provider using routing and it looks like that:
route add -p 172.16.2.0 mask 255.255.255.0 10.1.0.2
route add -p 172.16.5.0 mask 255.255.255.0 10.1.0.2
route add -p 10.0.0.0 mask 255.0.0.0 10.1.0.2
Everything is working well in XP (or other OS), but then I try to setup a Routing in router:
1.
2.
I'm realy tired to flashing and reflashing between 1.00.02 and 1.00.03, changing browsers, and hard reseting.
Anybody'll gimme a shot trick to my tired brains?
Solved!
Go to Solution.

1. Yes.
2. netstat:
C:\Users\dan>netstat -rn
===========================================================================
Список интерфейсов
31...........................inet
12...00 40 f4 76 95 bd ......VIA Rhine III Fast Ethernet адаптер
11...00 1d 92 2c 23 02 ......Realtek RTL8168B/8111B Family PCI-E Gigabit Ethern
et NIC (NDIS 6.20)
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #2
21...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #2
13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
14...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4
19...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #3
18...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP
16...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #3
20...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #4
===========================================================================
IPv4 таблица маршрута
===========================================================================
Активные маршруты:
Сетевой адрес Маска сети Адрес шлюза Интерфейс Метрика
0.0.0.0 0.0.0.0 10.1.0.2 10.1.3.42 4501
0.0.0.0 0.0.0.0 On-link 91.203.178.26 21
10.0.0.0 255.0.0.0 10.1.0.2 10.1.3.42 4246
10.1.0.0 255.255.0.0 On-link 10.1.3.42 4501
10.1.3.42 255.255.255.255 On-link 10.1.3.42 4501
10.1.255.255 255.255.255.255 On-link 10.1.3.42 4501
91.203.178.26 255.255.255.255 On-link 91.203.178.26 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
172.16.2.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
172.16.2.10 255.255.255.255 10.1.0.2 10.1.3.42 4246
172.16.5.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 10.1.3.42 4502
224.0.0.0 240.0.0.0 On-link 91.203.178.26 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 10.1.3.42 4501
255.255.255.255 255.255.255.255 On-link 91.203.178.26 276
===========================================================================
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
172.16.2.0 255.255.255.0 10.1.0.2 1
172.16.5.0 255.255.255.0 10.1.0.2 1
10.0.0.0 255.0.0.0 10.1.0.2 1
===========================================================================
IPv6 таблица маршрута
===========================================================================
Активные маршруты:
Метрика Сетевой адрес Шлюз
16 1125 ::/0 2002:c058:6301::c058:6301
11 276 ::/0 fe80::f88b:9485:52cd:caaf
1 306 ::1/128 On-link
13 58 2001::/32 On-link
13 306 2001:0:4137:9e50:2846:3ccb:a434:4de5/128
On-link
16 1025 2002::/16 On-link
16 281 2002:5bcb:b21a::5bcb:b21a/128
On-link
11 276 fe80::/64 On-link
13 306 fe80::/64 On-link
13 306 fe80::2846:3ccb:a434:4de5/128
On-link
11 276 fe80::b9aa:b87b:89ea:fcdd/128
On-link
1 306 ff00::/8 On-link
13 306 ff00::/8 On-link
11 276 ff00::/8 On-link
===========================================================================
Постоянные маршруты:
Отсутствует
C:\Users\dan>
2. ipconfig:
C:\Users\dan>ipconfig /all
Настройка протокола IP для Windows
Имя компьютера . . . . . . . . . : druh
Основной DNS-суффикс . . . . . . :
Тип узла. . . . . . . . . . . . . : Гибридный
IP-маршрутизация включена . . . . : Нет
WINS-прокси включен . . . . . . . : Нет
Порядок просмотра суффиксов DNS . : mannet.lan
Адаптер PPP inet:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : inet
Физический адрес. . . . . . . . . :
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv4-адрес. . . . . . . . . . . . : 91.203.178.26(Основной)
Маска подсети . . . . . . . . . . : 255.255.255.255
Основной шлюз. . . . . . . . . : 0.0.0.0
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Включен
Ethernet adapter lanHOME:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : VIA Rhine III Fast Ethernet адаптер
Физический адрес. . . . . . . . . : 00-40-F4-76-95-BD
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Ethernet adapter 1000LAN:
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Realtek RTL8168B/8111B Family PCI-E Gigab
it Ethernet NIC (NDIS 6.20)
Физический адрес. . . . . . . . . : 00-1D-92-2C-23-02
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Локальный IPv6-адрес канала . . . : fe80::b9aa:b87b:89ea:fcdd%11(Основной)
IPv4-адрес. . . . . . . . . . . . : 10.1.3.42(Основной)
Маска подсети . . . . . . . . . . : 255.255.0.0
Аренда получена. . . . . . . . . . : 17 октября 2009 г. 17:37:10
Срок аренды истекает. . . . . . . . . . : 18 октября 2009 г. 17:37:09
Основной шлюз. . . . . . . . . : fe80::f88b:9485:52cd:caaf%11
10.1.0.2
DHCP-сервер. . . . . . . . . . . : 172.16.2.2
IAID DHCPv6 . . . . . . . . . . . : 234888594
DUID клиента DHCPv6 . . . . . . . : 00-01-00-01-12-43-2B-71-00-1D-92-2C-23-02
DNS-серверы. . . . . . . . . . . : 172.16.2.2
Основной WINS-сервер. . . . . . . : 172.16.2.2
NetBios через TCP/IP. . . . . . . . : Включен
Туннельный адаптер Reusable Microsoft 6To4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Reusable ISATAP Interface {543B8BBE-84D2-471B-B8FB-F73600B4A8
2B}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети* 5:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2001:0:4137:9e50:2846:3ccb:a434:4de5(Осно
вной)
Локальный IPv6-адрес канала . . . : fe80::2846:3ccb:a434:4de5%13(Основной)
Основной шлюз. . . . . . . . . :
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер 6TO4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.mannet.lan:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.{AE6B314F-94BA-478F-8751-74DEB5AB1888}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети*:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2002:5bcb:b21a::5bcb:b21a(Основной)
Основной шлюз. . . . . . . . . : 2002:c058:6301::c058:6301
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер isatap.{8B513FFA-4355-406F-B999-1701EE42D5B9}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
3.
4. without privider's cable:
4. with provider's cable:

Having connectivity problems with itunes

Hi i'm having some connectivity problems with itunes i can open up the itune folder on my desktop but it will not connect to the itunes store,
Any ideas of how I can get round this both my laptops will connect but not the desktop and of course thats where all the music is

This forum is for troubleshooting compatibility issues between Macs and Windows. Please post your question in the iTunes discussions:
http://discussions.apple.com/category.jspa?categoryID=150

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

I finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

i finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

In the iPhoto preferences verify that yo have the correct print products country selected.
Do you have any firewire software such as Little Snitch?
Is your internet connection working ok?
LN

Any wifi connection problems with new Macbook Pro 13" models?

I currently use a 15" Macbook Pro (about 3.5 years old) that has intermittent WiFi connection issues (intermittently loses signal). This seems to have been a very common problem with this laptop model. My kids, who use Macbooks, have no connection problems. In any case, I'd love to buy one of the new model 13-inch Macbook Pro's but hesitate because of my many issues with WiFi connectivity on my older Macbook Pro. Just wondering if anyone is experiencing connectivity problems with the new model?

I've never had Wifi connection problems with a Macbook and now with the 13" MacBook Pro I was flabergasted when I took my MacBook down the street to a coffee house with free WiFi. I went to connect to their WiFi and found my own WiFi connection listed. I thought this odd even though I was on the same block as my apartment, my apartment is six stories up. I connected to the Coffee Shop WiFi but it was really slow so I wondered if I could connect to my own home connection. I switched it over and lo-and behold I did connect! It was a good 300 feet away! I NEVER saw this with previously owned MacBooks including the black MacBook and the MacBook offered just before they moved the MacBook up to the Pro series.
So I'd say they have improved the WiFi nicely.

Carmel advisors: skype connection problem with the...

Hi everyone i use regularly skype but during this week i have a problem weither i call or receiving a call,when i call it rings 2 times then it cuts. showing me a message connection problem with the device
Thank you in advance for your help
Carmel advisors

Greetings, Carmel Advisors, and welcome to the Community!
Please start by posting back with clarifications and more detailed information:
Which device or computer are you experiencing this on? Please note the device or computer, its operating system, and which version of Skype you are using.
You ticked the "WiFi" label; does this mean you are referring to the Skype for WiFi feature?
What has changed or altered from previous weeks when Skype worked well for you?
Thanks and regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Connection problem with wlan router wrk54g

Similar Messages

Maybe you are looking for