Connection problem zd1211 with rc.conf

Hi!
I have had some problem with wireless network configuration (on my girlfriend pc).
With zd1211 drivers the wireless configuration through rc.conf doesn't work, sometimes iwconfig shows AP not associated and sometimes apparently everything is OK but there isn't connection.
This is an example of her rc.conf:
ath0="ath10 192.168.1......
wlan_ath0="ath0 essid....
INTERFACES=(lo ath0)
The only way it works is with manual configuration, like this:
ifconfig ath0 up
ifconfig 19.... netmask 255....
route......
iwconfig essid.......
The strange thing is that with newest patch of 2.6.22 kernel also my wifi card (driver bcm43xx) doesn't work with rc.conf configuration.
Have you an idea?
Antonio

Im have exatly the same problem with same driver.å.. hmm bug?

Similar Messages

Wifi connection problem better with full battery

I have a macbook air I bought in 2012 (1.7 GHz Intel Core i5, 4 Gb memory) I know there are a lot of problems with other users complaining of wifi connecting problems. I have experienced the same problem but only when my battery charge is less than 98%. After my macbook has been on sleep for several hours, and has not been plugged in, the battery slowly drains and when I try to use it, it refuses to connect to any wifi connection. But as soon as I charge it up to 100% then it automatically connects, without having to restart it. Just wondering if anyone else has experienced this and if there has been any other answers from Apple regarding a potential fix for this issue....

Try this and it should reset your printer. On the front panel press the * and the # key at the same time, then press 1,2,3 in that order on the touch screen touch the left arrow button twice which will take you to the reset menu then press ok. Press the left arrow two more times and it should say "semi-full reset" press ok and this will be performed. The printer should shut down and will have to be turned back on, it will ask you for your language and your country the printer should initialize itself and should print an alignment page. NOTE: any speed dial numbers will be lost when you perform the semi-full reset.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

ZyXEL iChat connection problem solved with updated firmware

Hi,
bought a new ADSL modem (ZyXEL Prestige 660H-61) and was unable to do video iChat with one particular person. She was/is using ZyXEL modem as well. Tried every setting with no success and noticed, when trying to find solution here, that other people are having problems as well with ZyXEL modems.
The firmware I had was V3.40(PE.9). As a last resort I updated the firmware to V3.40(PE.10) and it indeed helped. I can now call and receive iChat video calls also from the person using ZyXEL modem.
HTH,
Seppo

Hi Seppo,
Welcome To The Apple Discussion Pages.
And this was without changing the port in IChat to 443 ?
Sounds like Zyxel have pulled their finger out at last.
10:55 PM Tuesday; March 7, 2006

Xcelsius Connection problem working with diferent dimensions

Hello to everybody,
Itu2019s my first post in this forum. Hope you can help me.
Iu2019m working with:
- BEX query designer
- BEX Analyzer
- Xcelsius (5.3.0.0) executing one query through web services.
Example 1
In my first example everything works fine.
The query Iu2019ve designed is very simple:
   In Rows: I set one dimension (Products)
   In Columns: I set a Ratio
I run Xcelsius (with the connection configuration well done) and I can see the results.
Example 2
In this second example, I would like to get the relationship between two different dimensions.
Iu2019ve designed the query as follows:
   In Rows: I drag & drop the dimension (Country sales) after I drag & drop the dimension (Products)
   In Columns: I set a Ratio
In case I run the query in BEX Analyzer I see the results
But when I run it from Xcelsius (with the same connection I have configured in the Example 1) web services close the connection and I receive an error message from Adobe with the title:
   u201CCanu2019t access to external data.u201D
Once I click u201Coku201D to the message, Adobe let me to change the global security from the Security Configuration Panel. Even setting u201Callow accessu201D to everything in Adobe, Iu2019m still having the same error message.
Iu2019m working with the same Xcelsius for both queries.
In both examples when I run the query from BEX Analyzer I get the results without any error.
Iu2019m lost, because I donu2019t know:
   - Where is the error?
       In BW, Web service connection, Xcelsius or Adobe.
In my humble opinion there is no relation with Adobe, because Iu2019m working in the same environment. I just have changed the query.
I also can view the data from both dimensions using Xcelsius. This means, Iu2019ve got right access to the data.
Could you please help me? What can I do or check?
Thanks in advance

Hi Sohawn,
This would not be the issue of MS Office version.
"I am unable to select cells,ranges, type in cells, but I am able to navigate using arrow keys, tab, and can access the excel toolbar."
Hope you would be able to select the cells and range using mouse. You might not be able to use keyboard.
Still you will be able to type inside the cell.
Please check and release "Scroll Lock" in the keyboard. Then everything has to work fine.
Check and revert in case this won't help.
With best wishes
BaaRaa.

Frozen on re-building library, plus connection problems (Zen Mic

Yes, I read the FAQ :smileytongue: I JUST got my new Zen Micro and started putting songs on it. It started giving me trouble with the connection, but was ok for a little bit. After awhile I couldn't get a connection at all. My computer says there's no problem with the USB connection.
Also, it's stuck on the "re-building library" screen. I did the clean-up and reboot, but it still gets stuck there and I left it on for hours. According the the FAQ, it says ["Next you should try [url="http://www.nomadness.net/modules.php?name=FAQ&myfaq=yes&id_cat=8&categories =Nomad+Jukebox+Zen#23]reloading the firmware/OS[/url], but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded."] But I'm having a connection problem, so I shouldn't do this?
Ahh...someone help! I just got it and I haven't even been able to use it yet! This was after waiting a week for it to be deli'vered.

Connection problems can be caused by numerous factors unfortunately.
The best test if you're able to do it is check on another PC. To see if the problem is with your player/cable or the PC.
There's a lot more advice here in the Zen FAQ at Nomadness.net.

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Zd1211 wep wireless connection problem

Hi. This is my first post!
I've installed Arch now for the 3rd time. And I got it quite as I want it to. But a strange problem persists with my wireless network connection.
When I use rc.conf to connect, I get a time-out during init 3.
After booting, I can connect by using
iwconfig eth1 essid WLAN key KEY
ifconfig
iwconfig eth1 essid WLAN key KEY
Yeah that's right. I have to use iwconfig twice.
When I use it the first time, I get a wrong IP-Adress. After the second connect, it works fine.
The connection works fine with network-manager, but I don't like that app, as it issues a lot of error messages.
My rc.conf:
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth1="dhcp"
wlan_eth1="eth1 essid WLAN key KEY"
WLAN_INTERACES=(eth1)
INTERFACES=(lo !eth0 eth1)

Welcome to Arch!
Try using netcfg2 instead, it's the new Arch way of connecting to wireless: http://bbs.archlinux.org/viewtopic.php?id=39505

Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problem

There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Internet connection dropping out throughout day; problem NOT with provider

My computer's connection to the Airport Express base station has no problems at all. But the internet connection goes out literally dozens of times a day (at no predictable schedule); this has been happening for almost a month. I originally thought the problem was with the internet provider, but I'm now beginning to think that either my settings are wrong, or that I have a corrupt file somewhere. Here are the details:
I connect via a cable modem (Time Warner - Road Runner). I know people have had problems with Time Warner, so I assumed that was the issue; however I've had 3 service calls and they've checked signal strength inside and out, and swapped out the modem and the cables. I don't think it is simply problems in our geographic area (i.e. greater Los Angeles) due to the fact that the Internet fails sometimes 40-50 times daily, and the problem began when I upgraded from an old Airport base station to a brand new Airport Express about a month ago.
The airport/internet connection is shared 3 ways: two MacBook Pro computers and one iPhone. My Airport's internet settings are as follows:
Configure IPv4 using DHCP.
DNS Servers: 66.75.160.63 and 66.75.160.64 (note I have already tried swapping these for OpenDNS -- this did NOT solve the problem)
Domain name: socal.rr.com
DHCP Client ID: [blank]
Ethernet WAN port: Default-Automatic
Connection Sharing: Share a Public IP address
DHCP Beginning Address: 10.0.1.2
Ending Address: 10.0.1.200
DHCP Lease: 4 hours
NAT settings are all unchecked
One of the main reasons I believe that the problem is with my computer's settings or a corrupt file is that I can fix the problem whenever the Internet "goes down" almost 100% of the time by doing the following: after loading Airport Utility, I make ANY trivial change (i.e. changing the DHCP lease from 4 hours to 5 hours) and then click UPDATE to refresh the Airport base station. This fixes the problem almost 100% of the time. But then, anywhere from 10 minutes to 3 hours later, the Internet connection goes down again. [Unplugging the power from the modem, waiting 30 seconds, and plugging it back in ALSO fixes the problem almost 100% of the time, until it goes out again a little while later.]
Also, I have tried disconnecting Airport and connecting directly to the cable modem via Ethernet. The problem remains exactly the same -- I can connect, but then the connection fails soon after. Unplugging then replugging the modem fixes the problem temporarily. So I do not think the problem is a defective Airport base station, nor do I think it is the modem (which has been replaced), nor Time Warner.
I can't think of what else to try -- but any advice would be greatly appreciated -- it's impossible for us to work with the Internet constantly going out throughout the day, every day.
Thank you!

Just in case I'm missing something obvious, I am here pasting all CONSOLE messages that appear when I do a standard RESTART:
8/22/08 7:15:12 AM loginwindow[24] DEAD_PROCESS: 0 console
8/22/08 7:15:12 AM shutdown[128] reboot by mark:
8/22/08 7:15:12 AM shutdown[128] SHUTDOWN_TIME: 1219414512 407699
8/22/08 7:15:12 AM com.apple.loginwindow[24] Shutdown NOW!
8/22/08 7:15:12 AM com.apple.loginwindow[24] System shutdown time has arrived
8/22/08 7:15:12 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[23] stopping
8/22/08 7:15:12 AM com.apple.SystemStarter[17] Stopping Adobe Version Cue CS2
8/22/08 7:15:31 AM kernel npvhash=4095
8/22/08 7:15:31 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
8/22/08 7:15:31 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
8/22/08 7:15:31 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
8/22/08 7:15:31 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
8/22/08 7:15:31 AM com.apple.launchd[1] (com.apple.distccdConfigd) Unknown key: SHAuthorizationRight
8/22/08 7:15:31 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
8/22/08 7:15:31 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
8/22/08 7:15:31 AM kextd[10] 413 cached, 0 uncached personalities to catalog
8/22/08 7:15:31 AM kernel hi mem tramps at 0xffe00000
8/22/08 7:15:31 AM kernel PAE enabled
8/22/08 7:15:31 AM kernel 64 bit mode enabled
8/22/08 7:15:31 AM kernel Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
8/22/08 7:15:31 AM kernel standard timeslicing quantum is 10000 us
8/22/08 7:15:31 AM kernel vmpagebootstrap: 972190 free pages and 76386 wired pages
8/22/08 7:15:31 AM kernel migtable_maxdispl = 79
8/22/08 7:15:31 AM kernel 98 prelinked modules
8/22/08 7:15:31 AM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
8/22/08 7:15:31 AM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
8/22/08 7:15:31 AM kernel Loading security extension com.apple.security.TMSafetyNet
8/22/08 7:15:31 AM kernel calling mpopolicyinit for TMSafetyNet
8/22/08 7:15:31 AM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
8/22/08 7:15:31 AM kernel Loading security extension com.apple.nke.applicationfirewall
8/22/08 7:15:31 AM kernel Loading security extension com.apple.security.seatbelt
8/22/08 7:15:31 AM kernel calling mpopolicyinit for mb
8/22/08 7:15:31 AM kernel Seatbelt MACF policy initialized
8/22/08 7:15:31 AM kernel Security policy loaded: Seatbelt Policy (mb)
8/22/08 7:15:31 AM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
8/22/08 7:15:31 AM kernel The Regents of the University of California. All rights reserved.
8/22/08 7:15:31 AM kernel MAC Framework successfully initialized
8/22/08 7:15:31 AM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
8/22/08 7:15:31 AM kernel devfsmakenode: not ready for devices!
8/22/08 7:15:31 AM kernel IOAPIC: Version 0x20 Vectors 64:87
8/22/08 7:15:31 AM kernel ACPI: System State [S0 S3 S4 S5] (S3)
8/22/08 7:15:31 AM kernel mbinit: done
8/22/08 7:15:31 AM kernel Security auditing service present
8/22/08 7:15:31 AM kernel BSM auditing present
8/22/08 7:15:31 AM kernel rooting via boot-uuid from /chosen: 419B2954-20DC-3880-AFEB-448924F9BE09
8/22/08 7:15:31 AM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
8/22/08 7:15:31 AM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001d4ffffe5f8d30; max speed s800.
8/22/08 7:15:31 AM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9160823AS Media/IOGUIDPartitionScheme/Customer@2
8/22/08 7:15:31 AM kernel BSD root: disk0s2, major 14, minor 2
8/22/08 7:15:31 AM kernel Jettisoning kernel linker.
8/22/08 7:15:31 AM kernel Resetting IOCatalogue.
8/22/08 7:15:31 AM kernel GFX0: family specific matching fails
8/22/08 7:15:31 AM kernel Matching service count = 1
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Matching service count = 2
8/22/08 7:15:31 AM kernel Previous Shutdown Cause: 5
8/22/08 7:15:31 AM kernel NVDANV50HAL loaded and registered.
8/22/08 7:15:31 AM kernel ath_attach: devid 0x24
8/22/08 7:15:31 AM kernel GFX0: family specific matching fails
8/22/08 7:15:32 AM kernel Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
8/22/08 7:15:33 AM kernel mac 12.10 phy 8.1 radio 12.0
8/22/08 7:15:33 AM kernel CSRHIDTransitionDriver::start []
8/22/08 7:15:34 AM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
8/22/08 7:15:36 AM bootlog[38] BOOT_TIME: 1219414527 0
8/22/08 7:15:36 AM rpc.statd[19] statd.notify - no notifications needed
8/22/08 7:15:37 AM com.apple.launchd[1] (com.apple.distccdConfigd[32]) Exited with exit code: 255
8/22/08 7:15:37 AM DirectoryService[34] Launched version 5.4 (v514.21)
8/22/08 7:15:37 AM fseventsd[28] bumping event counter to: 0x2e4ba71 (current 0x0) from log file '0000000002e4b394'
8/22/08 7:15:37 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[23] starting
8/22/08 7:15:38 AM kernel yukon: Ethernet address 00:1b:63:a2:29:d1
8/22/08 7:15:38 AM kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:c0:f5:49
8/22/08 7:15:38 AM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[24] Login Window Application Started
8/22/08 7:15:38 AM com.apple.SecurityServer[20] Entering service
8/22/08 7:15:38 AM /usr/sbin/ocspd[62] starting
8/22/08 7:15:39 AM kernel 11D beacon causing regdomain change to CC 840
8/22/08 7:15:39 AM kernel en1: 802.11d country code set to 'US'.
8/22/08 7:15:40 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
8/22/08 7:15:39 AM configd[36] setting hostname to "Macintosh-3.local"
8/22/08 7:15:44 AM kernel USBF: 16.757 AppleUSBHubPort: Port 1 of Hub at 0x1a000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
8/22/08 7:15:44 AM kernel USBF: 17. 59 CSRHIDTransitionDriver[0x723ca80](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
8/22/08 7:15:44 AM kernel CSRHIDTransitionDriver... done
8/22/08 7:15:46 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
8/22/08 7:15:46 AM org.ntp.ntpd[14] Error : nodename nor servname provided, or not known
8/22/08 7:15:46 AM ntpdate[70] can't find host time.apple.com
8/22/08 7:15:46 AM ntpdate[70] no servers can be used, exiting
8/22/08 7:15:53 AM kernel AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
8/22/08 7:15:53 AM kernel AirPort: Link Up on en1
8/22/08 7:15:54 AM kextd[10] writing kernel link data to /var/run/mach.sym
8/22/08 7:16:02 AM loginwindow[24] Login Window Started Security Agent
8/22/08 7:16:02 AM SecurityAgent[88] User info context values set
8/22/08 7:16:02 AM SecurityAgent[88] Login Window done
8/22/08 7:16:02 AM loginwindow[24] Login Window - Returned from Security Agent
8/22/08 7:16:02 AM loginwindow[24] USER_PROCESS: 24 console
8/22/08 7:16:02 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[81]) Exited: Terminated
8/22/08 7:16:02 AM com.apple.launchctl.Aqua[91] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
8/22/08 7:16:02 AM com.apple.launchctl.Aqua[91] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
8/22/08 7:16:03 AM com.apple.launchd[66] (0x101260.VersionCueCS3monitor) Failed to check-in!
8/22/08 7:16:03 AM /System/Library/CoreServices/coreservicesd[44] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Mark's Public Folder) returned -14135

X1 connectivity problem with old VGA beam projector using mini displayport to VGA adaptor.

Hi all,
I would like to ask you how to connect this X1 with VGA projector as well.
actually, X1 has a external interface specification as mini displayport 1.1a.
So I bought mini displayport to VGA adapter from MAC store.
(Actually, Lenovo Korea office doesn’t sell this adapter directly on Korea, even in the future.)
and try to connect both of LED monitor and beam projector.
LED monitor was worked as well. but, this adaptor doesn't work with VGA projector. TT
Please help me how to work this adaptor with projector as well.
Solved!
Go to Solution.

Hi everybody. I was having the same issue here, but I bought a Mac minidisplayport to VGA adapter. It worked on my Monitor but it was not working on my clients VGA beam projectors. But today I figured out a way to make it work, and it is pretty easy; just change your laptop screen resolution.
When you connect the mini Dport to VGA adapter to the projector VGA receiver cable, just change your laptop screen resolution to 1024x768 (maximum) and the projector will receive the signal with no problem.
This is the best solution that I found, because is easy to find a Mac/Apple Mini display Port to VGA adapter.
Hope this works for you too.
Regards,
J.

I am having ongoing connection problems with the Clash of Clans app which means that I lose battles, resources or boost times. This results in a loss of gems which I have purchased but will not be refunded as they will not accept responsibility.

Whilst playing Clash of Clans I will continually lose the internet connection. This means that I lose battles, resources, gold etc and lose boost times. I have informed Supercell who blame my internet connection even though the iPhone, laptop and TV all work fine so it is obviously a technical problem with their game and probably something to do with their last updates.
As I have purchased gems I feel that I should be compensated for my loss but they will not accept responsibility nor investigate the technical issue. The loss of connection occurs constantly with the game often freezing during replays or searching for battles. This is obviously not a connection issue.
What suggestions do you have to resolve this situation?

Hi.
Thanks for the reply. I asked because I also wanted to see if others had encountered the same problem.
I have no problems with my internet connection as I run my TV, laptop and iPhone off the same connection with no problems. I believe that since the recent updates to the game this has caused the problem. The game often freezes, cancels out or returns me to the main game screen during battles or replays.
What I want to know is how do I get the game designers or owners to acknowledge my problem as at this time they keep telling me it is my internet that is a problem and not their game. How do they know this when they refuse to investigate. What can I do and who do I go to for support if they won't accept responsibility?
I am very grateful to you for replying but concerned that if this can happen to me then how many other gamers are losing out and paying for something that they are not going to receive.
Many thanks.

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Creative Zen 32GB - connection problem with 2nd PC

Can anyone help?
Have had my ZEN for 2 years now & (touch wood) it's still going well.
I want to be able to upload music from my laptop when I'm away so I installed the software & registered it without any problem. However my laptop can't detect the device.
My ZEN has just connected quite happily with my main PC so it can't be the devce. Is there a restriction against using the same device on two different computers? If not why can't my laptop detect the device?
O/S Windows XP SP3 on both computers.
Thanks

Many thanks for your response.
I have tried connecting using another USB without any success.
I think my lap top should be powerful enough - it has a 5 inch screen and I can connect my Philips 32GB GoGear without any problem.
(My Philips is my back-up in case anything goes wrong with my ZEN but I don't like it as much )

Connection problem zd1211 with rc.conf

Similar Messages

Maybe you are looking for