Connection problems portal - BI

Hello,
We are trying to connect the BI system with a BI portal (same system)..
However, when running the template installer on the portal, we get some errors such as:
"Element 'SAPConfigLib.ABT.Unclassified.maintainJcoDestination':Error during executing Java Reflection: Failed to delete JCO client connection 'WD_ALV_METADATA_DEST'"...
When checking in the BI report 'rspor_cust01' I get the following:
"Status för Steg 1 - skapa RFC-destination i J2EE-Engine
   Status 1 - Skapa RFC-destination i J2EE-Engine         Okay
   Status 2 - Skapa RFC-destination för portal            Okay
   Status 3 - Underhåll portal-server-inställningar för p Okay
   Status 4 - Underhåll single sign-on i BI               Okay
   Status 5 - Exportera BI-certifikat till BI             ABT_certificate.crt is not existing.
   Status 6 - Importera BI-certifikat till portal         Existence of BW certificate in Portal cannot be checked automatically.
   Status 7 - Skapa BI-system i portal                    Existence of BW System in Portal cannot be checked automatically.
   Status 8 - Konfigurera användaradministration i portal Configuration of User Management in Portal cannot be checked automatically.
   Status 9 - Exportera portalcertifikat till portal      No check with Portal SID
   Status 11 - skapa repository-hanterare för BI i portal Setup of Repository Manager for BW in Portal cannot be checked automatically.
   Status 12 - Underhåll användarallokering i portal       System failure during call of function module RSWR_RFC_SERVICE_TEST
   Status 13 - Importera SAP NetWeaver Plug-In till BI     Okay"
.. In other words, there seems to be problems with the certificates. Could anyone please provide me with input on how to resolve this issue. How do I handle the certificates when using only one system for both Java and ABAP?
thanks and regards,
F C

make sure you have done all the pre-requisites for running the template installer.
Note 917950 provides some attachments which will be really helpful.
Also try to update ABAP and JAVA to the latest SP levels.

Similar Messages

Problem connect to Portal with SLD

Hi , i have problem connect the portal (7.0) whit SLD server
The SLD server is configured in the Solution Manager.
SLD: ctsi386nt02.ctsnx.com:sapgw00
the check connect SLD failure. show messages.
[Thr 4724] * ERROR partner 'ctsi386nt02.ctsnx.com:sapgw00' not reached
[Thr 4724] *
TIME Tue May 03 14:15:29 2011
[Thr 4724] * RELEASE 700
[Thr 4724] * COMPONENT NI (network interface)
[Thr 4724] * VERSION 38
[Thr 4724] * RC -10
[Thr 4724] * MODULE nixxi.cpp
[Thr 4724] * LINE 2823
[Thr 4724] * DETAIL NiPConnect2
[Thr 4724] * SYSTEM CALL connect
[Thr 4724] * ERRNO 10061
[Thr 4724] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 4724] * COUNTER 25
[Thr 4724] *
[Thr 4724] *****************************************************************************
 Return code: RFC_FAILURE(1)
 error group: 102
 key: RFC_ERROR_COMMUNICATION

Hi,
User SLD - doesn't matter on name belogns to system where SLD is configured and running. SO I guess you have SLD on Solman.
In case you didn't configured SLD on portal you have to set up on portal on visual admin choose Cluster > Server >Services > SLD Data Supplier > tab Runtime > HTTP Settings and add data of your Solman's SLD hostname port and user (SLDDUSER)
In case of you have SLD also on portal, go to SLD page e.g. http://<hostname>:5<system_number>00/sld
On the SLD initial page, choose Administration and in the section Server > Data Suppliers.
add data of your Solman SLD
Check web http://help.sap.com/saphelp_nw70/helpdata/en/ee/74b3407e73c57fe10000000a1550b0/frameset.htm
Best regards,
Peter

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

HTTPS connection from portal to external webserver

Hi,
I am looking for a way to open a HTTPS connection from portal server to an external webserver. According to <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e2/71c83edf72e16be10000000a114084/content.htm">SAP</a> the code should look like
KeyStore keystoreCAs = ...
SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
Does not look difficult, but how do I create the keystore object? The keystore object should somehow be connected to the portal server's keystore which manages the certificates of trusted Certificate Authorities.
Any ideas?
Regards,
Martin

Hi,
meanwhile I solved the problem by my own. The solution slightly simplified is given below.
javax.naming.InitialContext ctx = new javax.naming.InitialContext();
java.lang.Object o = ctx.lookup("keystore");
com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub manager = (com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub) o;
java.security.KeyStore keystoreCAs = manager.getKeystore("TrustedCAs");
com.sap.security.core.server.https.SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
java.net.HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
For connecting via a proxy the host name and port number of the proxy have to be set as System properties using "https.proxyHost" and "https.proxyPort".
java.util.Properties systemSettings = System.getProperties();
 systemSettings.put("proxySet", "true");
 systemSettings.put("https.proxyHost","192.168.0.1") ;
 systemSettings.put("https.proxyPort", "80") ;
Additionally you have to make sure that the server's certificate is issued by a trusted Certification Authority (Must have an entry in your Keystore "TrustedCAs"). To verify this use the Visual Administrator and view service "Key Storage".
Regards,
Martin

Connection problem between sap bw and EAI

Hi
Please
I'd like to know why people who work on the part of my EAI project say there is a connection problem between eai and SAP BW. He explained that the connection is good at 12h AM and 16h PM the system was disconnected, he receive this error message:
System.ServiceModel.Security.MessageSecurityException: The HTTP request is Unauthorized with customer authentication scheme 'Basic'. The authentication header received from the server was' Basic realm = "SAP NetWeaver Application Server [DB1/100].
I like to know if this is a problem with sap bw (misconfiguration of authorisations) or at the eai.
Cordialy

Hello,
we have 2 possiblities in BW to get data into BW.
1) pull
2) push
I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
and
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
All of these possibilies are decribed in the online help and in howto papers.
hope this helps
Michael

Can4t connect to Portal

Hi!!!
After upgrade jdk version i can4t connect to portal
My apps developed with plsql toolkit works correctly but portal dont work i supose that the problem is in jserv but i don4t know where?
could anyone help me?
thanks in advance.

i forgot to tell that now jserv is not working.

Timeouts and connection problems after 5.1(2) upgrade

AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?

I don't know specifically, but I did notice that 5.1(3) was released today.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Unending connectivity problems -- and Desktop Help...

I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well.
BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
4) Connection dies. So much for Microsoft Fix It.
5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
Summary: I seem to be being simultaneously hit with one issue after another.
I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
Above all though: I'm really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
Thanks.

Thanks again to John and gg30340. Here's an update:
1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
4) Hub reset to factory fresh, according to BT guide.
5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

TS1538 my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Network connection problems, please help!

I have had an iPod Touch (4th generation) for over a year now and it worked fine. Today, something went wrong with my network connection. One moment it says that I'm connected to a network, and a few seconds later it says I'm not connected... Then a few seconds later it's connected again. I have full wifi bars, and it does it throughout my whole house. The wifi symbol keeps going on and off. I tried turning my Verizon Westell Model 6100G Modem off and back on because this normally fixes my wifi connection problems. This didn't work. Then I tried turning my iPod off and back on. This didn't work. I tried turning the wifi off and back on. This didn't work. I tried forgetting my network and signing back in. This didn't work. I also tried resetting the network, and this didn't work either. I'm not having any connection problems with my laptop, it's working fine. It's only my iPod. I'm still able to use the wifi, but for a split second, it will not work. I'm not sure what else to do. It's very annoying! I'm going to see if it does this at other peoples houses with their wifi. Can any one tell me what's wrong and how I should fix it? My only theory is a broken antenna...Please help! Thanks!

I have two things you could try.
1. Plug your iPod into the host computer that which the network is based around because sometimes the network has trouble identifying a device if it has been a while since you plugged it into the computer.
2. Find some way to get your network information (IP address, Subnet Mask, Router, DNS numbers) from another device on the network (e.g. laptop). Then go to Settings > Wi-FI and find your router and tap the blue arrow to the right of the name and tap the tab that says "Static" and enter this information accordingly. Then exit back to the network names menu and re-enter your passcode for your network (assuming you have a passcode)

Open and close RFC connection with portals...

Hi Experts,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
Please advice is it possible to achieve this. If yes, then how.
Regards,
Guddan

Hi Guddan,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
If this needs to be a synchronous call, then you will need to optimize the query to its best.
Regards,
Chen

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Connection problems portal - BI

Similar Messages

Maybe you are looking for