Connection problems with PC suite

Hi
I have a 6233 and I have tried everything to connect it to my PC via the PC Suite. This includes using bluetooth and a cable connection (CA-53). I have uninstalled and reinstalled the latest verion of pc suite and still no luck. I am able however to connect to my pc but not through the pc suite.
I am running windows XP .
Please can somebody help as I begining to go mad trying to fix this problem
Thanks

Well I can find nothing in the help about message support plug ins, and a search on the Nokia PC Suite page finds nothing so does anyone know what this is about?
Edit - did a search on this forum and found the answer. The error message is incorrect, you don't go to help you just click on messages in PC Suite and it communicates with your phone and the messages then show.
None of this happened when I installed PC Suite on the computer last June when I got the N80 - I just ran the software, connected the phone and everything was straightforward!!!!Message Edited by kangaroo400 on 17-Mar-2007
09:45 PM
Second edit - you also need to do run get connected again to transfer the message support to the phone, and on the phone you have to accept the software. And now my internet is crashing!Message Edited by kangaroo400 on 17-Mar-2007
09:50 PM

Similar Messages

Nokia X6 connection problem with ovi suite

I had recenly bought a nokia x6 16gb and I have connection problem with my ovie suite.I am using cable to connect to the pc.When I open my ovie store it says connect ur device under the ovie suit toolbar. And I connect it but it actually worked but it work for about 5sec and it auto dissconnected.I had tried reconnecting it but turn out the same.But when I am using my laptop and I connect it using Bluetooth it work (ONLY FOR TRANSFER SONG AND PHOTO).I cant update my phone software because I am using bluetooth.I also tried using cable to my laptop but it is same like how I connected to my pc.I am using Windows XP SP2(PC).Thank you for those who helped me and spending time reading it.(Reason=Because I wanna update my phone Software).Again Tks

Hi PhoneNerdies,
Firstly, I recommend to update your Windows XP to Service pack 3. Nokia Ovi Suite do not support fully the XP with service pack 2.
Then use the latest Ovi Suite available, current version is 2.2.0.245 and available from Nokia.com and Ovi.com download pages. You Ovi Suite version you find from help menu and About the Ovi Suite tag.
Then update your X6 to the latest SW available.
After these steps your X6 would work fine.
Regards
HHaapis

Connection problem with PC suite

Hello,
I have a Nokia 3120 with the firmware version :V05-91 22/10/04.
I use a data cable type DKU-5
As soon as i connect this cable to my phone i have on my screen phone the following message:Enhancement connected
I go to the menu Settings to find the submenu Enhancement settings but this submenu is not on my mobile,so i can't connect it to pc suite.
If anybody could help me
Thanks

Hi,
Check the following:
Your phone model is supported by the current Nokia PC Suite version at www.nokia.com/pcsuite and reinstall the correct version of Nokia PC Suite if needed.
Your Nokia device is running the latest software. For downloads and assistance, go to Nokia software update service.
When using a cable connection, check that the cable is an original Nokia cable and supported by your phone at www.nokia.com/accessories.
If the problem still persists, uninstall the PC Suite, reboot your PC and install PC Suite again.

5800 XM connection problems with PC Suite!

Hello,
I cannot connect my Nokia 5800 XM with Nokia PC Suite... it used to work, but one day (I don't remember it clearly but I think i did a firmware update of the phone that day over the air...)it stopped. My pc now still recognises the phone as mobile device and i can access the external and phone memory over windows explorer, but PC Suite doesn't find it.
What version of Windows is being used?
- XP Professional 32bit
What Service Pack is installed?
- SP2
What version of PC Suite is installed?
- 7.1.51.0
What is the connection method, cable, bluetooth or IR?
- well neither now...
I've already followed several tutorials how to remove PC Suite cleanly, repaired the connectivity drivers, re-installed the bluetooth drivers, followed the pdf manual of how to install connectivity drivers and to troubleshoot them, used pc suite cleaner... I really don't know any more I can do now I'm kinda desperate
When I wanna add the phone to the PC Suite, it just doesn't find any phones connected... Furthermore, I used to be able to connect my phone over bluetooth, but since then I get the message that I cannot use that type of connection and should check if drivers and everything are okay (don't know the exact message as I use PC Suite in German)...
My drivers and my device are okay though, I can also connect other bluetooth devices to my pc so it works... I have a HP integrated Module with Bluetooth 2.0 technology using the Broadcom driver version 5.0 that _came with the notebook_ and is the driver downloadable over the official hp homepage - so it can't be that, I think..
Curiously, when I open the connection manager, the available options are IR, Bluetooth and serial cable CA-42, despite the claim on another Nokia page that using the CA101 cable used for 5800XM it should show the serial and the USB option, which isn't shown at all ...
Please help me, I've been trying all kinds of things for 2 weeks now..the phone also has the newest firmware,btw...
I'm really getting desperate here...
Greetings, Christina

Nobody, really?
Guys I'm desperate here... can maybe someone from Nokia help?
I've really tried everything I've found out there, and nothing seems to work for me... (

Connectivity problem with ovi suite with nokia x2-...

hi,
i have bought a new nokia x2-01 and i have already nokia e63,
i m trying to connecting my new nokia x2-01 using my e63's usb cable but pc shows that usb not recognise i have tried more then 10 times but it is not connecting can u just help me out for that pls
i cant connect my phone with my pc pls solve it ASAP
thanks,
munawarkhan

You need a Nokia microUSB Cable CA-101 for the X2-01.
http://www.developer.nokia.com/Devices/Device_specifications/X2-01/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Intermittent problem with PC Suite - no text is di...

I have an intermittent problem with PC Suite - every so often it will stop displaying any text.
For eaxmple, right-click on the task bar icon gives a list of icons for backup, messages, sync etc., but the text is missing. Also, the 'tool-tips' in the application itself are empty grey boxes.
Restarting PC Suite solves the problem for a while, but it always comes back.
The main problem is that when it gets in this state, incoming call alerts don't show the name/number.
Has anyone else had this and managed to sort it.
I'm running PC Suite 7.1.40.6 on a Lenovo ThinkPad T61p running Windows XP SP3. The phone is a 6230i connected via Bluetooth.
Thanks.
Alan.

Yes the Support line directed me to try a different USB port, with no luck.
Also looked for the connection in windows device manager>>nothing appeared except the computers ports...
[quote]Hi, Here is something what you could try to do: 1. Uinstall Nokia PC Suite 6.82.22 (or 6.7 or 6.8x) and restart PC. 2. Go to Windows' Control Panel and open "Add or Remove Programs" application. 3. If there are "PC Connectivity Solution" (or "Nokia PC Connectivity Solution" and/or "Nokia Connectivity Cable driver", uninstall those and restart PC. 4. Install PC Suite 6.82.22 and restart PC. If problem happen again: 1. Go to Windows' Control Panel and open "Add or Remove Programs" application. 3. Select "PC Connectivity Solution", click "Change" and then "Repair". 4. After Repair, restart PC. And if no help again: Save RegPCSuiteComponents.bat file to C:\Program Files\PC Connectivity Solution\ folder. Then go that folder and run it (double-click that file). After that restart PC. Does any of those help you?? [/quote]
I've tried your 1st & 2nd suggestions....but I can't find the "connectivity solution" folder you mention (and being a complete noob (!) I don't know what a .bat file is (nor how to use it lol)
In fact I can't find PC Suite anywhere in the program files. I REALLY think that it wasn't installed OK....it should not have taken less than one second to download if it took 1 3/4 hrs initially

Internet connection problem with MacPro, only. PC fine

I have a Netgear 600n. My notebooks, Vista PC and MacPro, are connected to it. There is no connection problem with the PC, but there is with the MacPro. Weekly, I have to delete the "system configuration file," or it keeps dropping the connection. I heard it had to do with Windows configuring the netgear router. is this true and is there a solution. I use the PC and the Mac at the same desk, so there is no location issue.
Thanks!!

Some operators block the option to use your phone as a modem, as this will use up a lot of data. It might be worth checking your contract to see if it mentions anything about data use, or give your operator a call to see if they have any limitations.
Please try to use the phone with a different SIM card to see if this is related to your operator after all, or if it's something else. If it doesn't work with a different SIM card either, try the following to see if the issue lies in Nokia Suite or in the phone itself:
Install Nokia Suite on a different computer or laptop and check if you can use your phone as a modem on that computer. If this works, try reinstalling Nokia Suite on your current computer and see if this makes a difference.
If this doesn't work, try connecting a different Nokia device to Nokia Suite and try to use it as a modem. If you can connect a different phone with your SIM card to the modem but connecting with yout 6700 Classic fails, then please visit a local care centre where your phone can be checked on any errors.
You can find a care centre by going to your local Nokia web page and clicking on Support.
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

Connectivity problems with Windows 7

I have connectivity problems with a Windows 7 machine. It's just lose the wireless connection from time to time, usualy "forgeting" Default Gateway. Any ideas? Please not the same machine did work very well on previus router: the problems did start after I installed Time Capsule as the main gateway. Thanks a lot.

Make sure you setup the TC with SMB compliant names.. short .. no spaces.. pure alphanumeric.
Use fixed channels.. not auto. Set a different name for 5ghz so it doesn't get mixed up between bands.
Check you have the latest drivers for the particular wireless card in the PC.. eg if a laptop don't download drivers from the laptop manufacturer.. get the ones from the wireless card.

Having connectivity problems with itunes

Hi i'm having some connectivity problems with itunes i can open up the itune folder on my desktop but it will not connect to the itunes store,
Any ideas of how I can get round this both my laptops will connect but not the desktop and of course thats where all the music is

This forum is for troubleshooting compatibility issues between Macs and Windows. Please post your question in the iTunes discussions:
http://discussions.apple.com/category.jspa?categoryID=150

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

I finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

i finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

In the iPhoto preferences verify that yo have the correct print products country selected.
Do you have any firewire software such as Little Snitch?
Is your internet connection working ok?
LN

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Any wifi connection problems with new Macbook Pro 13" models?

I currently use a 15" Macbook Pro (about 3.5 years old) that has intermittent WiFi connection issues (intermittently loses signal). This seems to have been a very common problem with this laptop model. My kids, who use Macbooks, have no connection problems. In any case, I'd love to buy one of the new model 13-inch Macbook Pro's but hesitate because of my many issues with WiFi connectivity on my older Macbook Pro. Just wondering if anyone is experiencing connectivity problems with the new model?

I've never had Wifi connection problems with a Macbook and now with the 13" MacBook Pro I was flabergasted when I took my MacBook down the street to a coffee house with free WiFi. I went to connect to their WiFi and found my own WiFi connection listed. I thought this odd even though I was on the same block as my apartment, my apartment is six stories up. I connected to the Coffee Shop WiFi but it was really slow so I wondered if I could connect to my own home connection. I switched it over and lo-and behold I did connect! It was a good 300 feet away! I NEVER saw this with previously owned MacBooks including the black MacBook and the MacBook offered just before they moved the MacBook up to the Pro series.
So I'd say they have improved the WiFi nicely.

Carmel advisors: skype connection problem with the...

Hi everyone i use regularly skype but during this week i have a problem weither i call or receiving a call,when i call it rings 2 times then it cuts. showing me a message connection problem with the device
Thank you in advance for your help
Carmel advisors

Greetings, Carmel Advisors, and welcome to the Community!
Please start by posting back with clarifications and more detailed information:
Which device or computer are you experiencing this on? Please note the device or computer, its operating system, and which version of Skype you are using.
You ticked the "WiFi" label; does this mean you are referring to the Skype for WiFi feature?
What has changed or altered from previous weeks when Skype worked well for you?
Thanks and regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Connection problems with PC suite

Similar Messages

Maybe you are looking for