Connection query. Please Help
My set up is....
BT line to Orange livebox. (wireless turned off)
livebox to TC (cat 5 cables)
TC to PC (not being backed up, Ethernet to provide net access)
Wireless to iMac. 802.11n (b/g compatible)
Internet dropouts, can't find server messages, you are not connected to the Internet, & such, are becoming the bain of my life.
So someone please help. The airport signal from TC in the menu bar is always strong, so how can I have lost the Internet?? Is it possible to loose the Internet but still have a full signal in airport? Where is the weak link? Time Capsule? Cable from livebox to TC? or is this a livebox/orange (ISP) issue??
Hi, settings has follows...
Internet Connection
Connect Using: Ethernet
Configure IPv4: Using DHCP
IP Address: 192.. (Same as Livebox IP) Although TC has its own on the first page you come to when launching APU.
Subnet Mask: as livebox
Router Address: as livebox
DNS Server: as livebox
Domain Name (blank)
DHCP Client ID: (blank)
Ethernet WAN Port: Automatic (Default)
Connection Sharing: Share a public IP address
DHCP
DHCP Beginning Address: 10.0.1.2
DHCP Ending Address:10.0.1.200
DHCP Lease: 4 hours
The rest are blank
NAT
NAT port mapping is enabled
Funny thing is the internet connection has been very reliable since last thursday, I looked in the APU when the connection fell & got messages about an unreliable IP address, cant remember the exact message. Also got double NAT errors in the Console! But as i say no trouble since, but I dread it happening again & think its going to any minute.
Thanks for your help.
Similar Messages
-
I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!
See:
iOS: Device not recognized in iTunes for Windows
You need iTunes version 10.7 -
How to improve the performance of the attached query, Please help
Hi,
How to improve performance of the below query, Please help. also attached explain plan -
SELECT Camp.Id,
rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount,
(SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
rCam.AccountKey as AccountKey
FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
WHERE Camp.AccountKey = rCam.AccountKey
AND Camp.AvCampaignKey = rCam.AvCampaignKey
AND Camp.AccountKey = CamBilling.AccountKey
AND Camp.CampaignKey = CamBilling.CampaignKey
AND rCam.AccountKey = xSite.AccountKey
AND rCam.AvSiteKey = xSite.AvSiteKey
AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
to_date('01-01-2011', 'DD-MM-YYYY')
GROUP By rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount
Explain Plan :-
Description Object_owner Object_name Cost Cardinality Bytes
SELECT STATEMENT, GOAL = ALL_ROWS 14 1 13
SORT AGGREGATE 1 13
VIEW GEMINI_REPORTING 14 1 13
HASH GROUP BY 14 1 103
NESTED LOOPS 13 1 103
HASH JOIN 12 1 85
TABLE ACCESS BY INDEX ROWID GEMINI_REPORTING RCAMSIT 2 4 100
NESTED LOOPS 9 5 325
HASH JOIN 7 1 40
SORT UNIQUE 2 1 18
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY SITE 2 1 18
INDEX RANGE SCAN GEMINI_PRIMARY SITE_I0 1 1
TABLE ACCESS FULL GEMINI_PRIMARY SITE 3 27 594
INDEX RANGE SCAN GEMINI_REPORTING RCAMSIT_I 1 1 5
TABLE ACCESS FULL GEMINI_PRIMARY CAMPAIGN 3 127 2540
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY CAMBILLING 1 1 18
INDEX UNIQUE SCAN GEMINI_PRIMARY CAMBILLING_U1 0 1Hello,
This has really nothing to do with the Oracle Forms product.
Please, send the SQL or/and PL/SQL questions in the corresponding forums.
Francois -
I lost my iPhone 3 days ago.. it wasn't connet to internet and I don't know how find it without the connection.. please help me and give me some advices!!
Change your passwords.
-
I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.
This subject has been talked/written about a lot, after Lion was introduced. A solution from Apple has not yet been published, everybody is waiting.
Try for instance https://discussions.apple.com/thread/3734081?start=15&tstart=0, but there are more discussion groups with the same subject: frequently lost WiFi-connections in newer Macs running Lion or up. -
Have updated my ipad2 to IOS6 , but now Iam unable to make facetime over wifi ...it keeps displaying connection lost. please help.
Also my facebook application is also not working .it just hangs itself. tried uninstalling and reinstalling. yet it isnt working. please helpTry This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
PROBLEM WITH HIERARCHICAL QUERY - PLEASE HELP
I have got three tables :
CREATE TABLE FIRM
(FID INTEGER NOT NULL PRIMARY KEY,
FNAME VARCHAR(40),
FTYPE VARCHAR(3),
MASTERID INTEGER );
CREATE TABLE FACULTY
(FAID INTEGER NOT NULL PRIMARY KEY,
FANAME VARCHAR(40),
FATYPE VARCHAR(3),
MASTERID INTEGER );
CREATE TABLE EMPLOYEE
(EID INTEGER NOT NULL PRIMARY KEY,
ENAME VARCHAR(20),
ESURNAME VARCHAR(20),
EJOB VARCHAR(3),
MASTERID INTEGER );
This is a hierarchical tree(or is ment to be, I,m complete rookie ) . Firm can be the root or can be slave to another firm. Faculty can be slave to firm, or to another faculty. Employee can be slave to faculty or to another employee(e.g. boss). This connections are specified by MASTERIDs.
I need to write a procedure, which parameter would be node ID. It is meant to create a VIEW from this node as if it was a root (view of a subtree).
I tried CONNECT BY clause but it works only on one table at a time and I have here three tables.
I completely don,t know how to write it. Please help.create view hierarchy as
select id, master_id, name from table1
union all
select id, master_id, name from table2
union all
select id, master_id, name from table3
Then do your connect by query against hierarchy.
It will not work in 8i (connect by on views not allowed), so you will need to materialize the view.
Kirill -
How to make recursive query.Please help
Dear Experts:
I want to retrieve all employees located in a department in addition to all other employees located in the child's nodes of this department too.
Problem Details:
I have "Employees" table and "Departments" Table
The structure of Dept Table is:
ID primary key
parent_dept foreign key(id)
deptname varchar2
deptType varchar2
The Employee table structure is
ID primary key
dept_id foreign key(Department.id)
empName varchar2Sample data for departments
ID : 1
parent_dept : null
deptname: General Manager office
deptType : 'GM'
ID :=2
parent_dept : 1
deptname: Information tech.
deptType : 'DPT'
ID :=3
parent_dept : 2
deptname: Software Development
deptType : 'SECTION'Sample Data for employees
ID : 101
dept_id :1
empName King
ID : 102
dept_id :2
empName ALAN
ID : 103
dept_id :2
empName SAM
ID : 104
dept_id :3
empName JANEI want to create a query that accepts a parameter "p_department_id" and returns All employees on the following conditions
1- In case the parameter value is null , then retrieve All Employees "king - alan- sam-jane"
2- In Case the parameter value is 1 , then retrieve all the employees under department id =1 in addition to all the employees located under the children departments.
in this case it will be "king - alan- sam-jane"
3- In case parameter value is 2 , then return all the employees under department id =2 in addition to all the employees located under the children departments.
In this case it will be " alan- sam-jane"
4- In case parameter value is 3 , then return all the employees under department id =3 in addition to all the employees located under the children departments.
in this case it will be only "JANE"
In brief , If I pass any value to the parameter :p_department_id , I want to retrieve all employees located in this department in addition to other employees located in the child's nodes of this department id
I use oracle database 11g release 2
Please help me
Thanks
Edited by: ta**** on Apr 3, 2013 5:56 PM
Edited by: ta**** on Apr 3, 2013 5:58 PMSQL> variable p_department_id number
SQL> exec :p_department_id := null
PL/SQL procedure successfully completed.
SQL> with employees as (
2 select 101 id,1 dept_id,'King' empName from dual union all
3 select 102,2,'ALAN' from dual union all
4 select 103,2,'SAM' from dual union all
5 select 104,3,'JANE' from dual
6 ),
7 departments as (
8 select 1 id,null parent_dept,'General Manager office' deptname,'GM' deptType from dual union all
9 select 2,1,'Information tech.','DPT' from dual union all
10 select 3,2,'Software Development','SECTION' from dual
11 )
12 select *
13 from employees
14 where dept_id in (
15 select id
16 from departments
17 start with (
18 (
19 :p_department_id is null
20 and
21 parent_dept is null
22 )
23 or
24 id = :p_department_id
25 )
26 connect by parent_dept = prior id
27 )
28 /
ID DEPT_ID EMPN
101 1 King
102 2 ALAN
103 2 SAM
104 3 JANE
SQL> exec :p_department_id := 1
PL/SQL procedure successfully completed.
SQL> /
ID DEPT_ID EMPN
101 1 King
102 2 ALAN
103 2 SAM
104 3 JANE
SQL> exec :p_department_id := 2
PL/SQL procedure successfully completed.
SQL> /
ID DEPT_ID EMPN
102 2 ALAN
103 2 SAM
104 3 JANE
SQL> exec :p_department_id := 3
PL/SQL procedure successfully completed.
SQL> /
ID DEPT_ID EMPN
104 3 JANE
SQL> SY. -
Hello Forum Members,
Can you please help me out:
SQL> select * from quarter_test4;
QUARTER CONFIG REP_DATE
Q1-2007 10 12-JAN-07
Q2-2007 10 21-APR-07
Q3-2007 870 14-AUG-07
Q4-2007 50 15-NOV-07
Q1-2008 60 02-JAN-09
Q4-2006 160 02-DEC-06
I want the following out put:
Please note that the future quarters should have current quarter sum(config).Please note that The current table
does not hold future quarters.I have to genarate query on which a report is based.
My Query:
SELECT quarter,
CASE
WHEN qtr > TRUNC(SYSDATE, 'q')
THEN LAST_VALUE(sum_config IGNORE NULLS) OVER(ORDER BY qtr)
ELSE sum_config
END sum_config
FROM (SELECT qtr, q.qtrstr quarter, SUM(qt.config) sum_config
FROM (SELECT 'Q' || TO_CHAR(qtr, 'q-yyyy') qtrstr, qtr
FROM (SELECT ADD_MONTHS(ADD_MONTHS(TRUNC(SYSDATE, 'q'), -13), 3 *(LEVEL - 1)) qtr
FROM DUAL
CONNECT BY LEVEL <= 9)
ORDER BY qtr) q,
quarter_test4 qt
WHERE qt.quarter(+) = q.qtrstr
GROUP BY qtr, q.qtrstr)
ORDER BY qtr;
Correct Output Generated:
QUARTER SUM_CONFIG
Q4-2006 160
Q1-2007 10
Q2-2007 10
Q3-2007 870
Q4-2007 50
Q1-2008 60
Q2-2008 60
Q3-2008 60
Q4-2008 60
====================================================================================================================================
New Requirement:Product column has been added.
SQL> select * from quarter_test3;
QUARTER CONFIG REP_DATE PRODUCT
Q1-2007 10 12-JAN-07 P1
Q2-2007 10 21-APR-07 P1
Q3-2007 870 14-AUG-07 P1
Q4-2007 50 15-NOV-07 P1
Q1-2008 60 02-JAN-09 P1
Q4-2006 160 02-DEC-06 P1
Q4-2006 997 02-DEC-06 P2
Q4-2007 60 14-NOV-07 P2
Q3-2007 970 14-NOV-07 P2
Q2-2007 20 21-APR-07 P2
Q1-2007 20 12-JAN-07 P2
QUARTER CONFIG REP_DATE PRODUCT
Q1-2008 70 12-JAN-08 P2
Expected Output:
Q4-2006 160 P1
Q1-2007 10 P1
Q2-2007 10 P1
Q3-2007 870 P1
Q4-2007 50 P1
Q1-2008 60 P1
Q2-2008 60 P1
Q3-2008 60 P1
Q4-2008 60 P1
Q4-2006 260 P2
Q1-2007 20 P2
Q2-2007 20 P2
Q3-2007 970 P2
Q4-2007 60 P2
Q1-2008 70 P2
Q2-2008 70 P2
Q3-2008 70 P2
Q4-2008 70 P2
My Query:
SELECT quarter,product,
CASE
WHEN qtr > TRUNC(SYSDATE, 'q')
THEN LAST_VALUE(sum_config IGNORE NULLS) OVER(ORDER BY qtr)
ELSE sum_config
END sum_config
FROM (SELECT qtr, q.qtrstr quarter,product, SUM(qt.config) sum_config
FROM (SELECT 'Q' || TO_CHAR(qtr, 'q-yyyy') qtrstr, qtr
FROM (SELECT ADD_MONTHS(ADD_MONTHS(TRUNC(SYSDATE, 'q'), -13), 3 *(LEVEL - 1)) qtr
FROM DUAL
CONNECT BY LEVEL <= 9)
ORDER BY qtr) q,
quarter_test3 qt
WHERE qt.quarter(+) = q.qtrstr
GROUP BY qtr,product, q.qtrstr)
ORDER BY substr(qtr,-4),substr(QTR,2,1)
Output:
QUARTER PRODUCT SUM_CONFIG
Q4-2006 P1 160
Q4-2006 P2 997
Q4-2007 P1 50
Q4-2007 P2 60
Q4-2008 70
Q2-2007 P1 10
Q2-2007 P2 20
Q2-2008 70
Q3-2007 P1 870
Q3-2007 P2 970
Q3-2008 70
QUARTER PRODUCT SUM_CONFIG
Q1-2007 P1 10
Q1-2007 P2 20
Q1-2008 P1 70
Q1-2008 P2 70
The query had not generated q2-2008,q3-2008,q4-2008 values [60]for P1...it had only generated q2-2008,q3-2008,q4-2008 values[70] for product P2.
Can you please advise me.You can make up the data using the model clause:
SQL> create table quarter_test3 (quarter, config, product)
2 as
3 select 'Q1-2007', 10, 'P1' from dual union all
4 select 'Q2-2007', 10, 'P1' from dual union all
5 select 'Q3-2007', 870, 'P1' from dual union all
6 select 'Q4-2007', 50, 'P1' from dual union all
7 select 'Q1-2008', 60, 'P1' from dual union all
8 select 'Q4-2006', 160, 'P1' from dual union all
9 select 'Q4-2006', 997, 'P2' from dual union all
10 select 'Q1-2007', 60, 'P2' from dual union all
11 select 'Q2-2007', 970, 'P2' from dual union all
12 select 'Q3-2007', 20, 'P2' from dual union all
13 select 'Q4-2007', 20, 'P2' from dual union all
14 select 'Q1-2008', 70, 'P2' from dual
15 /
Tabel is aangemaakt.
SQL> select 'Q' || to_char(mod(q,4) + 1) || '-' || to_char(trunc(q/4)) quarter
2 , config
3 , product
4 from quarter_test3
5 model
6 partition by (product)
7 dimension by (to_number(substr(quarter,4))*4 + to_number(substr(quarter,2,1)) - 1 q)
8 measures (config)
9 rules
10 ( config[for q from 2006*4 + 3 to 2008*4 + 3 increment 1]
11 = nvl(config[cv()],config[cv()-1])
12 )
13 order by product
14 , q
15 /
QUARTER CONFIG PR
Q4-2006 160 P1
Q1-2007 10 P1
Q2-2007 10 P1
Q3-2007 870 P1
Q4-2007 50 P1
Q1-2008 60 P1
Q2-2008 60 P1
Q3-2008 60 P1
Q4-2008 60 P1
Q4-2006 997 P2
Q1-2007 60 P2
Q2-2007 970 P2
Q3-2007 20 P2
Q4-2007 20 P2
Q1-2008 70 P2
Q2-2008 70 P2
Q3-2008 70 P2
Q4-2008 70 P2
18 rijen zijn geselecteerd.Regards,
Rob. -
Network connection problems, please help!
I have had an iPod Touch (4th generation) for over a year now and it worked fine. Today, something went wrong with my network connection. One moment it says that I'm connected to a network, and a few seconds later it says I'm not connected... Then a few seconds later it's connected again. I have full wifi bars, and it does it throughout my whole house. The wifi symbol keeps going on and off. I tried turning my Verizon Westell Model 6100G Modem off and back on because this normally fixes my wifi connection problems. This didn't work. Then I tried turning my iPod off and back on. This didn't work. I tried turning the wifi off and back on. This didn't work. I tried forgetting my network and signing back in. This didn't work. I also tried resetting the network, and this didn't work either. I'm not having any connection problems with my laptop, it's working fine. It's only my iPod. I'm still able to use the wifi, but for a split second, it will not work. I'm not sure what else to do. It's very annoying! I'm going to see if it does this at other peoples houses with their wifi. Can any one tell me what's wrong and how I should fix it? My only theory is a broken antenna...Please help! Thanks!
I have two things you could try.
1. Plug your iPod into the host computer that which the network is based around because sometimes the network has trouble identifying a device if it has been a while since you plugged it into the computer.
2. Find some way to get your network information (IP address, Subnet Mask, Router, DNS numbers) from another device on the network (e.g. laptop). Then go to Settings > Wi-FI and find your router and tap the blue arrow to the right of the name and tap the tab that says "Static" and enter this information accordingly. Then exit back to the network names menu and re-enter your passcode for your network (assuming you have a passcode) -
New Infinity connect issues - please help
We are having ongoing issues with getting BT infinity installed to our new house. I really need someone that can actually help us find out what is wrong and how we can resolve the issues we are having.
It all started a few months ago when we ordered BT infinity and a new phone line to our new Chapel conversion house.
Initially there were some issues with the engineer being unable to get the phone line to the house. After numerous phone calls and several engineers visits, we these have now been resolved and we do have a working telephone.
The problem seems to be with the Infinity. Nobody can give me an answer as to why we have not yet got a connection.
When the phone engineer visited he said that he would try and connect the Infinity in the green box. – When he went to do this he tried to obtain our patching information and was informed that there was no live order for infinity on our number… As there was nothing more he could do he left.
We then checked with BT and they confirmed that we do have an order for infinity and that there was a problem that needed and engineer to look at. (We have a box and are paying for the service already…
We were told last week that an engineer was going to attend on Monday 13th Jan and that we definitely would have a connection by last Monday at the latest… - no engineer attended despite my wife spending her 3rd day in the house waiting for an engineer!
She phone BT on Tuesday and was told that there was a problem and she would be contacted by Thursday Morning at the latest. – Needless to say , No phone call!!
We really need to sort this connection out. Is there anyone who can take this and run with it until it’s sorted? – We are getting nowhere talking to random individuals who have no real history of our connection history.
Please Help!
DougHi dougchapel,
Thanks for posting and welcome!
I'm sorry for the problems you're having getting set up on BT Infinity. I can help get you sorted from here. Click on my username and under the "about me" section you'll see the link to get in touch with us.
Cheers,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Firefox won't establish a connection. Please help
Hello,
My Mozilla Firefox has worked for ages and all of a sudden when my father tried to open it, it came up with a message saying:
'Unable to connect
Firefox can't establish a connection to the server at www.ebay.com.au.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.'
I have checked all the settings and everything looks right, my internet is connected fine, other apps using the internet works fine, I have checked the fire wall and I have tried to troubleshoot problems. Nothing seems to be working it just keeps saying the same thing. I don't know what else to do, can someone please help me? I need to get it working before tomorrow because my father uses it and he knows how to use it and where everything is. Please, please help.
Thank-you heaps!
ZoeUAC is turned off ?
Did you firefox "Run as administrator" ?
thanks -
Ipod error message when connected. Please help
Windows XP
I have had my 30 gigabyte ipod for almost a year and i've never had any problems with it before. But recently our area wasn't able to get broadband. So i was unable to download the recent ipod and itunes updates. I have done that now.. but i think something has affected my ipod. When i plug it into my computer nothing comes up on my ipod screen and i can continue browsing music etc.. i know this isn't supposed to happen. And on my computer an error message comes up saying "USB device not recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. "
Please help me!Okay. So i'll tell you the steps i have taken. I've uninstalled all the ipod updaters i had on my computer, eg 2006 and 2005.. and i reinstalled the latest version of itunes. I also went to device manager and all that but it only came up in the list at "unknown device" and i uninstalled the driver and tried to reinstall it but it came up saying it was an unknown device again. I tried right clicking on it and going "scan for hardware updates" but it told me the one i have installed is the nearest match. I also tried connecting my ipod to my computer in disc mode which did nothing. But i have discovered my ipod charges when i plug it in.. but the computer freezes on the black dos screen (as it always has for me when i turn the computer on with the ipod plugged in) and the ipod remains charging. but it seems if i plug it in after windows has loaded it's not even recognised.
I'm sorry for making it so long but i really really need help -
Recently, my ipad stopped appearing on itunes when I connect to my computer. I restarted apple mobile service but there was no difference. When I connected my ipod nano 2nd gen, it came up on itunes. Please help me resolve this. Thank you.
Hi Chukwudinma!
Here is an article that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for using the Apple Support Communities!
Cheers,
Braden -
MySql - Connection Props - Please help - willing to pay
Hi,
My setup:
Windows XP
IIS ver 5
MySQL databse
Dreamweaver MX 2004
Language ASP.NET VB
This is driving me round the bend have searached all forums
and nothing is pointing me in the right direction.
1) First question, can I actually use dreamweaver MX 2004 to
create ASP.NET VB pages and connect to a MYSQL database?
The reason I ask is I have set up a system DSN in >
control panel > administrative tools > Datasources (ODBC)
All works fine connection is successful etc. (MySQl ODBC 3.51
Driver)
I then open dreamweaver, create new ASP.NET VB page. Go to
the databases panel click the + sign and have 2 options:
OLE DB connection or SQL Server connection. I assume its not
the latter as that is for SQL seerver not MySQL. I have tried every
combination of the OLE DB connection (2options - Templates or
Build)
Templates:
Oracle (Microsoft Provider)
Oracle (Oracle Provider)
Microsoft SQL Server
Microsoft Access 97 (Jet 3.5 provider)
Microsoft Access 2000 (Jet 4 provider)
UDL File
I don't think any of the above are correct for connecting to
a MySQL database, so I try:
BUILD
List of providers this time are :
Microsoft ISAM 1.1 OLE DB Provider
Microsoft Jet 4.0 OLE DB Provider
Microsoft OLE DB Provider for Data Mining Services
Microsoft OLE DB Provider for Indexing Service
Microsoft OLE DB Provider for ODBC Drivers (***** I Guess its
this one? ****)
Microsoft OLE DB Provider for OLAP Services 8.0
Microsoft OLE DB Provider for Oracle
Microsoft OLE DB Provider for SQL Server
Microsoft OLE DB Simple Provider
MSDatashape
OLE DB Provider for Microsoft Directory Services.
So I choose the one highlighted above for ODBC drivers as I
think this one is correct?
1st option - Use data source name which has a dropdown box
and I can choose my dsn as mentioned earlier.
or 'Use connection String' - I Don't use
2nd Option Logon to server info
Username ***Is this the username and password of mySQL
database because if so it doesn't work, have also tried leaving it
bland and every time i do a test after choosing the initial catalog
to use I get the eror message:
Test connection failed because of an error in intialising
provider. Catastrophic failure!
All I want to is connect to a bl**dy databse so I can teach
myself the basics but can't get past this first hurdle.
Someone please help! Thanks in advance.
PasswordFor your eMac, you will need to go with a *miniDV camcorder*, such as the Canon ZR series (current lineup is the ZR900/930/950/960). They all have image stabilization & take stills; the 900, 930 and 960 also have an external mic input.
You may also want to look into an earlier Canon Optura or Elura series camcorder or similar miniDV camcorder from Sony, JVC, Panasonic, etc. There aren't many new miniDV models available anymore, but you can still find them and they are on the lower end of the price scale these days!
B&H Photo is a great supplier to deal with and you will be hard pressed to find prices lower elsewhere.
The eMac does not support AVCHD, so that eliminates any of those newer camcorders (you need an Intel based Mac to capture & edit AVCHD video). The Canon FS line unfortunately records to MPEG2 MOD files, which needs to be converted before it can be imported into iMovie or Final Cut Express. And the conversion is not simple. -
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points
Maybe you are looking for
-
Hi I am using version 3.6.15 with Windows 7, I would like to use another download program in place of Firefox's default option, how can I disable this in Firefox Many thanks Bruce Baxter
-
SOAP Adapter XI 3.0 Response HTTP 402 ICM_HTTP_TIMEOUT
When i sent a soap request to a ext. Server all is fine. But at the moment to get the response following error come up. Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT). What is wrong? IP-address of the client: 169.254.25.
-
Have new iMac prices rocketed in the UK?
Correct me if I'm wrong (I'm sure you will), but it seems that the prices of the new Haswell iMacs have gone up by £50 for the base 21.5" and £100 for the entry level 27". I'm sure that they were £1,099 and £1,499 respectively as opposed to the new £
-
Sort ArrayList of objects by id
I have ArrayList of containing 'MonthlySale' objects, below is my class. import java.io.Serializable; import java.util.ArrayList; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.
-
Ipod won't turn on/sync with computer?
i was listening to my ipod a couple days ago, with full charge...when skipping to a song, my ipod locked up, so i reset it. When that happened, all I got was the "Sad Face." I let it go for a couple days, and then again still got the same error messa