Connection refused error while connecting to port.

Hello,
I have a service (Connect Direct) listening at port 1364 in server X.
$ netstat -an | grep 1364
11.22.33.44.1364 *.* 0 0 0 0 LISTEN
(Assume 11.22.33.44 = Server X's IP.)
Now, when another server (say Y) tries to use this service in server X, it is getting "Connection Refused" error. I tried telneting.
From Y:
telnet 11.22.33.44 23 is working
telnet 11.22.33.44 1364 is giving the same Connection Refused error.
telnet 11.22.33.44 1364
Trying 11.22.33.44...
telnet: Unable to connect to remote host: Connection refused
/usr/sbin/ping 11.22.33.44
11.22.33.44 is alive
To complicate things, 11.22.33.44 is not the original IP of server X.
ifconfig -a gives:
hme0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 11.22.33.55 netmask ffffff00 broadcast 11.22.33.255
hme0:1: flags=843<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 11.22.33.44 netmask ffffff00 broadcast 11.22.33.255
(in additional to a couple of other IPs).
What could be the problem?
Help!!!!

IPF firewalling could cause this, if you have it enabled.
I havent used it, so I'm not entirely sure how to check.
Of another firewall if its between the 2 machines. Are they on the same subnet?

Similar Messages

Connection Refused Error In Connection Client

Hello Geeks
I am runnig a RMI application in which runs on internet , i have setup RMI server on a host server and it is running there.
Now, when i try to call client using ip address of the Host , i am getting Connection Refused error.
Example :
Registry registry=LocateRegistry.getRegistry("70.33.246.110");
System.out.println("Above connectMe");
String serverName = "rmi://70.33.246.110:2786/connectUser";
connectMe stub=(connectMe)Naming.lookup(serverName);
System.out.println("Below connectMe");
boolean log=stub.login(username,password,1);
System.out.println("Below login");Here "connectuser" is name i have given in server to which client lookups.I am getting -> Above connectMe and Below connectMe
but then i am getting connection refused error.
Please Help Me Out.....ASAp
Edited by: Hardik.Mishra on Oct 3, 2009 5:46 PM

Registry registry=LocateRegistry.getRegistry("70.33.246.110");There's no point to doing that ...
System.out.println("Above connectMe");
String serverName = "rmi://70.33.246.110:2786/connectUser";
connectMe stub=(connectMe)Naming.lookup(serverName);... if you're doing that. The getRegistry() doesn't do a network operation, it just constructs a stub to that Registry locally. Only by using it would you find out whether it meant anything: and you're not using it.
I am getting -> Above connectMe and Below connectMe
but then i am getting connection refused error.See item A.1 on the RMI Frequently Asked Questions list in the Javadoc.

Connection refused Error while writing file to FTP server.

Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.

Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location.

Connection Refused Error while running AS ABAP Initial Load

All,
I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
When I run the job I get the following:
Initializing SAP connection with parameters:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
Error Init failed
I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
Is there additional configuration that needs to take place on the ABAP side to accept the connection?
I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.

Ankur,
Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
-Arun

RMI: connection refused error while invoking remote method from client mac.

Hi All,
when i run client program, which is calling remote object from other system, it shows the below error.
please help me solving this issue, i also have policy file and installed security manager.
Exception in Cliendjava.rmi.ConnectException: Connection refused to host: 10.66.
112.137; nested exception is:
java.net.ConnectException: Connection refused: connect
thanks in advance.
Regards,
Anand.

See item A.1 of the [RMI FAQ|http://java.sun.com/j2se/1.5.0/docs/guide/rmi/faq.html].

Connection refused error showing in ironport s170 - WSA

Connection refused error showing in ironport s170 - WSA
I am getting “Connection refused” error while I connect ironport s170 through console cable. also i am not able to connect it through HTTP and SSH. Complete output is given below.
Last login: Thu Sep 11 07:16:59 on cuad0
Copyright (c) 2001-2011, Cisco Systems, Inc.
AsyncOS 7.5.2 for Web build 303
Welcome to the Cisco IronPort S170 Web Security Appliance
Traceback (most recent call last):
File "/usr/build/iproot/ap/ipoe/ipoe/bootstrap.py", line 55, in <module>
File "/data/lib/python2.6_7_i386_nothr/runpy.py", line 128, in _run_module_as_
main
"__main__", fname, loader, pkg_name)
File "/data/lib/python2.6_7_i386_nothr/runpy.py", line 34, in _run_code
exec code in run_globals
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/cli.py", line 426, in <modul
e>
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/external_auth/__init__.py",
line 212, in initialize
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/external_auth/__init__.py",
line 118, in _setup_old_authentication
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/command_client.py", line 674
, in quick_read_var
File "build/bdist.freebsd-7.2-RELEASE-p2-i386/egg/command_client.py", line 133
, in connect
Commandment.CommunicationError: <host name>: Network communication error
: Connection refused
AsyncOS <host name> (cuad0)
login:

Hi,
You can upgrade to 7.7+ but if you require a root cause analysis I suggest you to open a TAC case.
Regards,
Luis Silva

Getting "ORA-12514 error" while connecting first time

Hi,
Getting below error while connecting to the database first time.
ORA-12514: TNS:listener does not currently know of service requested in connect
apludc01dat25:e2cmpc1 > tnsping ora37_ap
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 26-MAR-2012 12:00:58
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/grid/product/crs/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = apl11764clu01-scan-oravip.nat.bt.com)(PORT = 61901)) (CONNECT_DATA = (SERVICE_NAME = ORA37_ap))
OK (0 msec)
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:15 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:22 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL>
Please help me out to resolve this issue.
Thank you.
Regards,
Dasarath

Hi,
We are getting this error while connecting remotely.
PFB output of listener status and services
apl11764a001:ORA37a > lsnrctl services LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:06
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: apl11764a001, pid: 25970>
(ADDRESS=(PROTOCOL=tcp)(HOST=apl11764a001)(PORT=10862))
The command completed successfully
apl11764a001:ORA37a > lsnrctl status LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
STATUS of the LISTENER
Alias LISTENER_ORA37
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 26-MAR-2012 12:15:17
Uptime 0 days 0 hr. 3 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /grid/product/crs/network/admin/listener.ora
Listener Log File /grid/product/crs/log/diag/tnslsnr/apl11764a001/listener_ora37/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_ORA37)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.4)(PORT=62037)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.7)(PORT=62037)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you.
Regards,
Dasarath

Error while connection through DDIC

Hi
WE are installing the NW2004 (ABAP +JAVA) on MNAXDB.
While installing the ABAP dtabase instance we get the following error
SAPINST cannot to SAP h system with user DDIC bcos password has changed
But if we see the
rfc217294_00001.trc
>TS> Thu Jul 5 16:29:45 2007
resize I/O buffer to 16000 bytes
>>>> [11] <unknown> : EXT <ac: 31> L ctsaix05 >>> OPEN
UUID: ab_drvstate create uuid {468D1523-1518-001A-0200-00008948E582}
Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=ctsaix05, GWSERV=sapgw02, ASHOST=ctsaix05, SYSNR=02
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 137.72.229.130, service 3302)
TIME Thu Jul 5 16:29:45 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8642
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 11
>>>> [11] <unknown> : EXT <ac: 32> L ctsaix05 >>> CLOSE abrfcio_mt.c 573
-{468D1523-1518-001A-0200-00008948E582}
>>> RfcOpenEx ...
Got following connect_param string:
 ASHOST=ctsaix05 CLIENT=000 LANG=EN LCHECK=1 PASSWD=******* PCS=1 SYSNR=02 TRACE=1 USER=DDIC
>>>> [11] <unknown> : EXT <ac: 33> L ctsaix05 >>> FREE abrfcio_mt.c 3634
-{468D1523-1518-001A-0200-00008948E582}
Trace file opened at 20070705 162945 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
<<< RfcOpenEx failed
I have started the sap server using the startsap command
Best regards
Manoj

i tried no suceess
Is it really a password issue.
Boce if i set the rfc trace i get the folloiwng
vi rfc217204_00001.trc
"rfc217204_00001.trc" 145 lines, 4899 characters
Trace file opened at 20070709 102510 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
resize I/O buffer to 16000 bytes
>>>> [1] <unknown> : EXT <ac: 1> L ctsaix05 >>> OPEN
UUID: ab_drvstate create uuid {46920D07-0D06-001A-0200-00008948E582}
Error in program 'sapinstexe': ======> Connect to SAP gateway failed
Connect_PM GWHOST=ctsaix05, GWSERV=sapgw02, ASHOST=ctsaix05, SYSNR=02
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 137.72.229.130, service 3302)
TIME Mon Jul 9 10:25:10 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8651
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 1
>>>> [1] <unknown> : EXT <ac: 2> L ctsaix05 >>> CLOSE abrfcio_mt.c 573
-{46920D07-0D06-001A-0200-00008948E582}
>>> RfcOpenEx ...
Got following connect_param string:
 ASHOST=ctsaix05 CLIENT=000 LANG=EN LCHECK=1 PASSWD=******* PCS=1 SYSNR=02 TRACE=1 USER=DDIC
>>>> [1] <unknown> : EXT <ac: 3> L ctsaix05 >>> FREE abrfcio_mt.c 3634
-{46920D07-0D06-001A-0200-00008948E582}
Trace file opened at 20070709 102510 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
:$
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 4
>>>> [4] <unknown> : EXT <ac: 11> L ctsaix05 >>> CLOSE abrfcio_mt.c 573
-{46920D0A-0D06-001A-0200-00008948E582}
>>> RfcOpenEx ...
Got following connect_param string:
 ASHOST=ctsaix05 CLIENT=000 LANG=EN LCHECK=1 PASSWD=******* PCS=1 SYSNR=02 TRACE=1 USER=DDIC
>>>> [4] <unknown> : EXT <ac: 12> L ctsaix05 >>> FREE abrfcio_mt.c 3634
-{46920D0A-0D06-001A-0200-00008948E582}
Trace file opened at 20070709 111251 , SAP-REL 640,0,118 RFC-VER 3 817057 MT-SL
<<< RfcOpenEx failed
Its getting connection refused error.
I have startred all the servcie.
Is there any servcie i am missing to start for DDIC.
Best Regards
Manoj

JCONTROL - dies with Error while connecting to DB

Hi....Experts
DB : Oracle 10.2.0.4.0
OS ; AIX 5.3
NW : 7.0 SP22
UT : EP
Yesterday the above server got rebooted by a power failure. after that
The server's DB is coming up as ora<sid> user, listener is also up
But as <sid>adm user - when i am starting . The jcotnrol dies and in thee work directory
....log_bootstrap_ID1168012.0.log fiel shows the below messages in the tail end,
================================================================
ERROR-1 : OBSERVED
================================================================
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
 at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
 at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
 at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
 at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
 at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
 ... 15 more
[Feb 10, 2012 4:46:28 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
================================================================
ERROR-2 : OBSERVED
================================================================
also i see error in work directory ...sapcpe.log as below
Host:d45adm> more sapcpe.log
2012/02/10 19:01:45
sapcpe version UC: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#20 $ SAP
Command line:
0: /usr/sap/D45/SYS/exe/run/sapcpe
1: name=D45
Trace level (profile): 1
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/D45/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
source: /usr/sap/D45/SYS/exe/ctrun
target: /usr/sap/D45/SYS/exe/run
ERROR: sapcpe: find <src> /usr/sap/D45/SYS/exe/ctrun failed, 2, No such file or directory, [sapxxcpe.c:1464]
sapcpe.log: END
================================================================
any thoughts & advises, clues ???
Rgds
PR

ISSUE - RESOLVED
####Summary######################################
Key Word of this Issue :
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
Reason
Name resolution by conflict / failure by netsvc.conf even we have hostfile & ping works with host name for Every user.
Solution
Adjusted netsvc.conf file to use the hostfile.
DETAILS OF RESOLUTION
OSS Experts asked me to copy the results
SAP Note No. 867176: FAQ: Oracle JDBC (JdbcCheckup) - Point 10
01. I copied JdbcCheckup.sar to location /home/sidadm/867176-jdbchkup/
02. Extracted the same in same foler with command : SAPCAR -xvf JdbcCheckup.sar
03. Now folder contained 2 files ""JdbcCheckup.java"" and "" JdbcCheckup.sar""
04. my JDBC driver file ojdbc14.jar is in location /oracle/client/10x_64/instantclient/
05. To determine the JDBC driver version issued the below command as per note
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
 at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
 at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
 at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
 at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
 at java.sql.DriverManager.getConnection(DriverManager.java:559)
 at java.sql.DriverManager.getConnection(DriverManager.java:189)
 at JdbcCheckup.main(JdbcCheckup.java:128)
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
06. Immediately id did google with above Syntax of error.
"""java.sql.SQLException: Io exception: There is no process to read data
written to a pipe"""
https://forums.oracle.com/forums/thread.jspa?threadID=1320173
which was referring about netsvc.conf
With UNIX Team discussions, adjusted the host file as first name
resolution source and DNS servers list followed in same(netsvc.conf) file. which
fixed the issue and "JdbcCheckup" passed.
07. JdbcCheckup Command - Passed output.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
connected.
=============
Database Product Name is ... Oracle
Database Product Version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
=============
JDBC Driver Name is ........ Oracle JDBC driver
JDBC Driver Version is ..... 10.2.0.4.0
=============
Hello World
Your JDBC installation is correct.
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BIG THANK TO EVERYONE !!!!!!!!!!!!!!!!
REGARDS
PR

Error while connecting to db

Hi,
We are getting the error while connecting the database.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
Error persists only for second or two & again connection comes back.
NOTE-- When this happens only new connection recives the error while existing connection work properly.
On metalink the error description is.
Cause: Unable to locate shared memory realm
Action: Verify that the realm is accessible
also I have checked
SQL> select resource_name,current_utilization,max_utilization,limit_value from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION LIMIT_VALU
processes 1044 1091 1100
sessions 1052 1097 1400
enqueue_locks 208 437 17404
enqueue_resources 248 335 UNLIMITED
ges_procs 0 0 0
Kindly advice urgent.

IBM AIX 5L
10.2.0.3
Client OS is Windows XP & oracle client using is oracle 8 & 9i client.
TNS Entery of client
AIX.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1521))
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1526))
(CONNECT_DATA =
(SID = ORCL)
There is only one oracle home on the client mechine
entries in sql* net are
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
names.default_domain=world
erro in the listener log is
18-MAY-2009 16:42:25 * (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=UdyogGrid.Exe)(HOST=Windows NT PC)(USER=vmittal))) * (ADDRESS=(PROTOCOL=tcp)(HOST=221.135.27.180)(PORT=2021)) * establish * ORCL * 0
18-MAY-2009 16:42:33 * ping * 0
WARNING: Subscription for node down event still pending.
NOTE-- Problem started from the day we have set the password for the listener.
Kindly advice.
Edited by: Sachin A on May 18, 2009 10:08 PM

I am getting error while connecting to sqlplus by using apps account in 11i

i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
[applmgr@appsc05t01 admin]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

yes.
login as: gorantla
[email protected]'s password:
Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
[gorantla@appsc05t01 ~]$ sudo su - applmgr
[applmgr@appsc05t01 ~]$ ora_setup
Available databases:
x = ATUXX
y = ATUYY
z = ATUZZ
Select database: \c
y
ORACLE_SID=ATUYY
IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
APPL_TOP=/apps/ATUYY/atuyyappl
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$ tnsping ATUYY
TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
OK (0 msec)
[applmgr@appsc05t01 ~]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

Error while connecting to SQL SERVER from OWB

HI All,
I got the following error while connecting to SQL SERVER from OWB(10gR2).
1). Created DSN with (GMSCADA)
2). tnsnames file is updated with the following information
GMSCADA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
(CONNECT_DATA =
(SERVICE_NAME = SA)
3). Tried to connect to SQL SERVER frm OWB
Username: sa
password: sa
host: 172.16.60.29
port: 1433
service name: GMSCADA
schema: sa
I got the following error, when I click Test Connection:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from OWB_3095
Regards,
Kumar.

Hi David,
What is Gateway, How I have to setup, Please let me know.
I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
Can u please let me know.
Regards,
Kumar.

Getting the error while connection to SAP Server

Hi,
 I am getting the below mentioned error while connection to SAP Sever using SAP.Net Connector. What could be the possible reason?
"
Connect to SAP gateway failed
Connect_PM GWHOST=ia2-ms.boi.hp.com, GWSERV=sapgw01, ASHOST=ia2-ms.boi.hp.com, SYSNR=01
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 15.78.80.31, service 3301)
TIME Fri Feb 02 11:10:35 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER
"

Hi
The gateway monitor is used to analyze and administer the SAP Gateway from outside the SAP System. The profile you assign to it must be the same as for the gateway. This process has different names:
UNIX: gwmon
Windows: gwmon.exe
more on this.. please go thru ..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bb/9f13c24b9b11d189750000e8322d00/frameset.htm
hope this info helps!
with regards,
raj.
pls, award points

Getting error while connecting Utility Customer E-Services

I am getting the following error while connecting to Utility Customer E-Services through the browser.
Error: Your user master has not been created correctly. Contact your system administrator.
Please advise some fix for this problem.
Thanks in advance.
Regards,
Nitin

Hi Mattia,
yes, I had resolved this problem. It requires some configuration in ume database of the WebAS, where UCES application is hosted.
1) Create a user in ume.
2) Assign group "Everyone" and "Authenticated Users" to the user
3) Within Customized Information tab, create the mapping between your web user, reference user and business partner.
fscm_refuser: Use reference user id. ( user id to login to ISU system )
objtype_0: BUS1006
objkey_0: User business partner details ( business partner number in ISU)
If there is no customized Information tab, then open visual administrator and do the following.
1) Navigate to Services->Configuration Adapter
2) Click on Runtime tab -> Display configuration
3) Navigate to cluster_data -> server -> cfg -> services -> Propertysheet com.sap.security.core.ume.service
4) Add the following in ume.admin.addattrs.
com.sap.security.core.user.refuser:fscm_refuser;com.sap.security.core.user.references:objtype_0;com.sap.security.core.user.references:objkey_0;com.sap.security.core.user.references:objtype_1;com.sap.security.core.user.references:objkey_1;com.sap.security.core.user.references:objtype_2;com.sap.security.core.user.references:objkey_2;com.sap.security.core.user.references:objtype_3;com.sap.security.core.user.references:objkey_3;com.sap.security.core.user.references:objtype_4;com.sap.security.core.user.references:objkey_4;com.sap.security.core.user.references:objtype_5;com.sap.security.core.user.references:objkey_5;com.sap.security.core.user.references:objtype_6;com.sap.security.core.user.references:objkey_6;com.sap.security.core.user.references:objtype_7;com.sap.security.core.user.references:objkey_7;com.sap.security.core.user.references:objtype_8;com.sap.security.core.user.references:objkey_8;com.sap.security.core.user.references:objtype_9;com.sap.security.core.user.references:objkey_9;com.sap.security.core.useces:objtype_10;com.sap.security.core.user.references:objkey_10;com.sap.security.core.user.references:objtype_11;com.sap.security.core.user.references:objkey_11;com.sap.security.core.user.references:objtype_12;com.sap.security.core.user.references:objkey_12;com.sap.security.core.user.references:objtype_13;com.sap.security.core.user.references:objkey_13;com.sap.security.core.user.references:objtype_14;com.sap.security.core.user.references:objkey_14;com.sap.security.core.user.references:objtype_15;com.sap.security.core.user.references:objkey_15;com.sap.security.core.user.references:objtype_16;com.sap.security.core.user.references:objkey_16;com.sap.security.core.user.references:objtype_17;com.sap.security.core.user.references:objkey_17;com.sap.security.core.user.references:objtype_18;com.sap.security.core.user.references:objkey_18;com.sap.security.core.user.references:objtype_19;com.sap.security.core.user.references:objkey_19;
5) Save the changes, exit visual administrator and restart the server.
Now. your application will work perfectly fine.

Connection Failed Error while Importing tables in 11.1.1.6 on Windows 7

Hi,
Can you please help me in resolving the connection failed error while importing the tables from the database.
I am using OBI 11.1.1.6 on Windows 7
You help is highly appreciated. I have followed all the below blogs but still i was not able to resolve the issue.
http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
http://obieedeveloper.blogspot.in/2012/03/connection-failed-error-in-obiee-11-g.html
http://iadviseblog.wordpress.com/2011/05/29/obiee-11g-error-in-importing-metadata/
http://www.obieefans.com/%E2%80%9Cthe-connection-has-failed%E2%80%9D-error-in-obiee-11g-admin-tool/
Thanks in Advance
Siva

It would be nice if you put your issues instead of asking to look those many urls.
try using tns entry in connection pool or follow this thread
Connection failed in OBIEE 11g

Connection refused error while connecting to port.

Similar Messages

Maybe you are looking for