Connection rejected ..
When running the app against a load tool, wl 5.1 running sp9 almost stops
handling requests after a say considerable size of requests and throws
serious of the attached message.
I guess wls is running out of sockets, but the app is perfect in normal
conditions.
When would this happen?
<W> <ListenThread> Connection rejected: 'Login timed out after: '5000' ms on
socket: 'Socket[addr=34.22.0.125/34.22.0.125,port=3345,localport=7001]''
Thanks
Madhu
Thanks Mike. I'm using Apache JMeter, test machines and server hooked to a
single switch. Another issue that I'm seeing the o/p queue length on the NIC
on the server is pretty high, so I guess that NIC takes all the request and
it doesn't reach weblogic. Any suggestions?
- Madhu
"Mike Reiche" <[email protected]> wrote in message
news:[email protected]...
>
> WLS prints out 'Login timed out' if something connects to it
> but does not send any data for five seconds.
> If you want to see this - then telnet <weblogic-host> 7001, and
> wait for five seconds.
>
> Check what your load tool is doing. Is the machine where you are
> running the load tool bogged down?
>
> Mike
>
> "Madhu" <[email protected]> wrote:
> >When running the app against a load tool, wl 5.1 running sp9 almost stops
> >handling requests after a say considerable size of requests and throws
> >serious of the attached message.
> >
> >I guess wls is running out of sockets, but the app is perfect in normal
> >conditions.
> >
> >When would this happen?
> >
> ><W> <ListenThread> Connection rejected: 'Login timed out after: '5000'
> >ms on
> >socket: 'Socket[addr=34.22.0.125/34.22.0.125,port=3345,localport=7001]''
> >
> >Thanks
> >Madhu
> >
> >
> >
> >
> >
>
Similar Messages
-
I'm running WL Express 5.1SP9 on a NT 4 server, Oracle 8.1.7 and an j2EE
application from an editor.
With the previous version of the application i wasn't having any problem,
since I installed the new version in the same environnement, I'm getting the
message when running the application :
"<E> <ServletContext-General> Warning: One of the getParameter family of
methods called after reading from the ServletInputStream(), can't mix these
two! "
"<W> <ListenThread> Connection rejected: 'Login timed out after 5000 msec.
The socket came from [host=10.56.13.202,port=1539,localport=80] See property
weblogic.login.readTimeoutMillis to increase of decrease timeout. See
property weblogic.login.logReadTimeoutsProp to turn off these log
messages.'"
The editor says it comes from WL configuration
Please Help !
Christophehi.
I'm not clear on this - what do you mean you are running a J2EE application from
an editor?
Also the error is coming from a servlet. Is one of your servlets calling a
getParameter() method after reading from the ServletInputStream()? If it is it
should be corrected.
Regards,
Michael
Christophe Chastang wrote:
I'm running WL Express 5.1SP9 on a NT 4 server, Oracle 8.1.7 and an j2EE
application from an editor.
With the previous version of the application i wasn't having any problem,
since I installed the new version in the same environnement, I'm getting the
message when running the application :
"<E> <ServletContext-General> Warning: One of the getParameter family of
methods called after reading from the ServletInputStream(), can't mix these
two! "
"<W> <ListenThread> Connection rejected: 'Login timed out after 5000 msec.
The socket came from [host=10.56.13.202,port=1539,localport=80] See property
weblogic.login.readTimeoutMillis to increase of decrease timeout. See
property weblogic.login.logReadTimeoutsProp to turn off these log
messages.'"
The editor says it comes from WL configuration
Please Help !
Christophe--
Michael Young
Developer Relations Engineer
BEA Support -
I have Flash Media Server 2 set up with a simple bandwidth detection application (with serverside code), and a videoplayer application (no serverside code). I have upgraded to Flash Media Streaming Server 3.5 and have managed to successfully get video to stream using the basic examples on the startup screen both locally and from another machine. However, when I try and connect to either the bandwidth detection application, or the videoplayer I get the error message:
NetConnection.Connect.Rejected
[ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (**my appname**/) is not a valid signed application; loading access denied.
I saw another post in this forum saying that for custom applications you need Flash Media Interactive Server instead of Streaming Server. This worries me as I'm quite far down this route now and don't want to tell my boss that actually we need to find another £2k to make this a viable solution! But looking at the credentials of Flash Media Streaming server (http://www.adobe.com/products/flashmediaserver/compare/), it seems to be that what I want to do is viable. At worst I would have thought that only the bandwidth application would be a problem as it has serverside code. But even so, the Streaming Server apparently does have bandwidth detection. How does this work then?
By having the Steaming Server am I somehow tied into Adobe video players if I want to use the streaming capabliities? Am I not able to have my own named application? Or is it simply likely that there is some setting somewhere I have missed which is causing the error.
Any advice would be much appreciated as I'm struggling to get to the root of these answers on my own.You just need to define handlers specially onBWDone on client side to do Bandwidth detection. Just check example "Bandwidth" in documentation/samples/Bandwidth/Bandwidth.as.
Since you are using VOD, i think you can just pass "true" as second parameter when you make nc.connect call in you client side and VOD application would make call to checkBandwidth and would call onBWDone when it finishes bandwidth detection. Read more about this in Client API documentation in SSLR.pdf and Dev_Guide.pdf.
Also Adobe has come with advanced Bandwidth detection which you can do using client-side Flash Player API's - Please check this link for more info:http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_on_demand.html
Also you can NetStreamInfo documentation which should be present in AS3LR (check documentation folder of FMS) -
ListenThread Connection rejected:
I get the following message a lot in my log.
Tue Jan 08 14:13:18 EST 2002:<W> <ListenThread> Connection rejected: 'Login timed out after: '5000' ms on socket: 'Socket[addr=HAMPTONS2/159.234.28.15,port=3731,localport=7001]
Why does this occur? I see that it is occuring for all of my remote users.
I see the property weblogic.login.readTimeoutMillis if I increase it to 20 or 30 seconds would that be a problem? What does this property really control.
thanks
gdh
This is read login timeout, the default is 5000 (5 seconds). If you need
longer time for your application, tune up this property in your
weblogic.properties:
weblogic.login.readTimeoutMillis
Cheers - Wei
Michael Hansen <[email protected]> wrote in message
news:[email protected]..
> I'm getting the following error on weblogic, when connecting from an
applet
> to a servlet:
> on aug 02 16:29:52 GMT+02:00 2000:<W> <ListenThread> Connection rejected:
> 'Login timed out after: '5000' ms on socket: '
> Socket[addr=localhost/127.0.0.1,port=1775,localport=7001]''
>
> Does anyone know why it appears, and how to avoid it?
> I'm running Weblogic 5.1 servicepack 5 and JDK 1.2.2
>
> MH
>
>
-
Re: Connection Rejected:Login Timed Out
This sounds like a slow client to me. Specifically the client isn't sending
enough data within the first 9 seconds for the server to determine which
protocol the client is using.
Srikant, [email protected], http://weblogic.bea.com/, etc.
Ajit wrote:
"Hi, I went through the various versions of Login Timed Out problems.This is my version. My Web server currently running on Weblogic Web Server 5.1.0 with service pack 9 is shutting down frequently.My server platform is SUN SOLARIS 2.6 5/98. The following messages reflect in the weblogic.log Thu Aug 02 08:49:52 EDT 2001:<W> <ListenThread> Connection rejected: 'Login timed out after 9000 msec. The socket came from [host=147.154.232.3,port=19431,localport=80] See property weblogic.login.readTimeoutMillis to increase of decrease timeout. See property weblogic.login.logReadTimeoutsProp to turn off these log messages.'Thu Aug 02 08:50:13 EDT 2001:<W> <ListenThread> Connection rejected: 'Login timed out after 9000 msec. The socket came from [host=147.154.232.5,port=10656,localport=80] See property weblogic.login.readTimeoutMillis to increase of decrease timeout. See property weblogic.login.logReadTimeoutsProp to turn off these log messages.'Thu Aug 02 09:23:18 EDT
2001:<!> <SSLListenThread> **** The WebLogic Server is no longer listening for connections.Thu Aug 02 09:23:18 EDT 2001:<!> <SSLListenThread> **** You should probably restart it.Thu Aug 02 09:23:18 EDT 2001:<I> <WebLogicServer> Server shutdown by systemThu Aug 02 09:23:18 EDT 2001:<I> <WebLogicServer> Server shutdown commencing NOWThu Aug 02 09:23:18 EDT 2001:<A> <ListenThread> ListenThread.run() failed:java.lang.ThreadDeathThu Aug 02 09:23:18 EDT 2001:<!> <ListenThread> **** The WebLogic Server is no longer listening for connections.Thu Aug 02 09:23:18 EDT 2001:<!> <ListenThread> **** You should probably restart it.Thu Aug 02 09:23:18 EDT 2001:<I> <WebLogicServer> Server shutdown by systemThu Aug 02 09:23:19 EDT 2001:<I> <HTTP> Destroying servlets in default servlet context.Thu Aug 02 09:23:19 EDT 2001:<I> <ServletContext-General> proxy: destroyThu Aug 02 09:23:19 Ehi srikanth i am facing some problem in weblogic for a particular port.weblogic
is shutting down for that port .this port
is configured for SSL.
when i have reviewed the logs i could trace
following error.i dont know whether this error is linked to the shutting down of weblogic.
ERROR:on Apr 08 13:30:36 CEST 2002:<W> <SSLListenThread> Connection rejected: 'Login
timed out after: '25000' ms on socket: 'Socket[addr=192.193.118.137/192.193.118.
137,port=33280,localport=7003}''
Each and everytime restarting the weblogic
instance is not a proper solution so please
let me know what can i do for this weblogic
shutting down abnormally.
waiting for ur reply
Best Regards
Surender
Wipro Limited. -
Error message: X11 connection rejected because of wrong authentication
Until recently I was able to ssh from the Mac in my office -- runing
MacOS 10.6.4, to a Sun Solaris server -- running Solaris 10 10/09
(update 8) and all available patches installed, and run X11 programs
displaying on my Mac.
I installed these patches recently:
142900-15 SunOS 5.10: kernel patch
124867-15 Sun Studio 12: Patch for C 5.9 compiler
122212-42 GNOME 2.6.0: GNOME Desktop Patch
138764-02 SunOS 5.10: acc driver patch
120199-16 SunOS 5.10: sysidtool Patch
119252-29 SunOS 5.10: System Administration Applications Patch
124630-44 SunOS 5.10: System Administration Applications, Network, and Core Libraries Patch
124628-10 SunOS 5.10: CD-ROM Install Boot Image Patch
118777-17 SunOS 5.10: Sun GigaSwift Ethernet 1.0 driver patch
121118-17 SunOS 5.10: Update Connection System Client 1.0.17
144759-02 SunOS 5.10: mount patch
145019-01 SunOS 5.10: ifconfig patch
119313-38 SunOS 5.10: WBEM Patch
124393-10 CDE 1.6: Dtlogin smf patch
119278-37 CDE 1.6: dtlogin patch
121734-13 SunOS 5.10: patch to support addition of new UTF-8 locales
119254-75 SunOS 5.10: Install and Patch Utilities Patch
118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
121430-53 SunOS 5.8 5.9 5.10: Live Upgrade Patch
119246-38 SunOS 5.10: Manual Page updates for Solaris 10
121308-22 SunOS 5.10: Solaris Management Console Patch
119315-21 SunOS 5.10: Solaris Management Applications Patch
118712-24 SunOS 5.10: Sun XVR-100 Graphics Accelerator Patch
144325-02 SunOS 5.10: Resource Management User Interface Patch
145074-01 SunOS 5.10: Trusted JDS Help rebranding patch
124457-03 X11 6.6.2: xdm patch
and now when I try to run certain programs, namely Symantec NetBackup
Server (NBS) administrator interface, jnbSA, when I run the program I see:
X11 connection rejected because of wrong authentication.
and jnbSA fails. I removed these patches:
118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
124457-03 X11 6.6.2: xdm patch
with no change. I have made NO updates to NBS, and what's
even more weird, regular X11 programs such as x{eyes,biff,emacs}
work fine.
I've tried tinkering with the contents of ~/sshconfig and /etc/ssh_config
to no avail.
Is anyone else seeing this problem?
Any suggestions?
Thanks!I'm confused why you posted on the Tarantella/SGD Forum then?
Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html -
NetConnection.Connect.Rejected in FMS 2
I want to create Audio/video chat application.
I have FMS 2.0.4 and XAMMP 1.6 installed on my computer
locally.
i use the following code to test a connection to the FMS:
conn = new NetConnection();
conn.connect("rtmp:/localhost/my_app");
conn.onStatus = function(info) {
trace ("Level: "+info.level+" Code: "+info.code);
but it seems it cannot establish a connection to the FMS
server and
returned the following errors:
Level: error Code: NetConnection.Connect.Rejected
Level: status Code: NetConnection.Connect.Closed
tried these other codes too on the connect function:
conn.connect("rtmp://localhost/my_app");
conn.connect("rtmp://127.0.0.1/my_app");
conn.connect("rtmp:/127.0.0.1/my_app");
conn.connect("rtmp:/my_app");
but still no luck.
What seems to be the problem in my configuration?
By the way, I tried to disable the XAMMP but stll it cannot
establish a connection?
Tried to run it in macromedia flash 8 using alt+enter and
through the
webserver using the publish html and swf files but still the
same.
Ive been working on this for days.
Im desperate,i need to start working on the application
already.
Somebody please help..
tnx..also be sure to check your log files (or you can go in
through the admin console and view the server log).
with this particular error, i personally had:
"Asynchronous I/O operation failed (Failed to attach to
completion port: The parameter is incorrect."
if you do a search on this error you will find not so much
information. i was able to get my application working using the
rtmpt protocol, but now, after coming back to work and booting my
machine, it's not working again and i have the same error.
things i've tried:
1) i shut down all anti-virus and firewall applications and
services
2) run netstat -a to see what is running and what ports are
being used
3) try specifying a different port for FMS to run on (default
= 1935). this can be changed via $InstallDirectory$\conf\fms.ini
(in windows). Inside the file search for ADAPTOR.HOSTPORT and
change the value to whatever port you want to try.
4) try variations of the url e.g. rtmp:/ rtmpt:/
rtmpt://localhost rtmpt://localhost:1935 etc.
5) make sure you don't have programs like netlimiter
installed as this is a known app that can cause problems w/ FMS by
intercepting system calls on the machine.
If you do find something that works, please contribute to
this thread as it could become valuable for others having these
issues. -
Fms3.5 NetConnection.Connect.Rejected
hi all,
today I install fms3.5 on my pc.
1)I can use rtmp://localhost/vod/mp4:sample2_1000kbps.f4v , it works ok.
But when I use rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v, I got Netconnect.connection.rejected. 192.168.8.3 is my fms server IP.
I was first use fms, who can help me?
2)When I set fms use port 1935 and 80, rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v works ok on other pc. But using wireshark(Wireshark is a network protocol analyzer for Unix and Windows.) I found , the flash player connect 1935 port at first, it send "connect",the server replay "connection.rejected" and "no scope "vod" on this server". Than it connect to 80 port, so I see the video is not send throw 1935 port with rtmp, but throw 80 port with rtmpt. Why? How can I see video throw rtmp?hi,the following is my edge.00.log
#Version: 1.0
#Start-Date: 2010-06-09 13:30:26
#Software: Adobe Flash Media Server 3.5.2 r654
#Date: 2010-06-09
#Fields: date time x-pid x-status x-ctx x-comment
2010-06-09 13:30:21 4580 (i)2581173 Host: softwaretest-pc IPv4: 192.168.8.3 -
2010-06-09 13:30:21 4580 (i)2631174 Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4 -
2010-06-09 13:30:22 4580 (i)2581252 Registering core (4600). -
2010-06-09 13:30:23 4580 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 80/v4 -
2010-06-09 13:30:23 4580 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 1935/v4 -
2010-06-09 13:30:23 4580 (i)2581252 Registering core (3252). -
2010-06-09 13:30:46 4580 (i)2581252 Registering core (5916). -
2010-06-09 14:00:53 4580 (i)2581250 Edge disconnected from core (5916). -
2010-06-09 14:16:29 4580 (i)2581250 Edge disconnected from core (3252). -
2010-06-09 14:16:30 4580 (i)2581250 Edge disconnected from core (4600). -
#Date: 2010-06-09
#Fields: date time x-pid x-status x-ctx x-comment
2010-06-09 14:17:05 3388 (i)2581173 Host: softwaretest-pc IPv4: 192.168.8.3 -
2010-06-09 14:17:06 3388 (i)2631174 Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4 -
2010-06-09 14:17:06 3388 (i)2581252 Registering core (3328). -
2010-06-09 14:17:07 3388 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 192.168.8.3:1935/v4 -
2010-06-09 14:17:07 3388 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 1935/v4 -
2010-06-09 16:19:50 3388 (w)2581171 System memory load (92) is high. -
2010-06-09 16:20:02 3388 (i)2581172 System memory load (87) is now below the maximum threshold. -
It display the fms is listene 1935 port. And I can get description: "no scope 'vod' on this server"
, while I receive "NetConnection.connect.rejected" from fms. -
Connection rejected, the server is in a running state.
Have deployed webservice within weblogic. WLS starts up fine. Users can access the webserver, after a period of time, webservice hangs up and users that try to connect recieve this following message, I also see this in the weblogic.log
The server is not able to service the request. Connection rejected, the server is in a running state. Starting service weblogic.application.internal.BackgroundDeploymentService$WaitForBackgroundCompletion, 110 of 112. Last service weblogic.deploy.service.internal.adminserver.HeartbeatService took 2ms.
I have no idea what to do. Right now the only way to bring back the webservice is to stop the WLS process and then restart. The service can fail anywhere from within about 20 mins of WLS start-up or about within 12hrs.
Any Ideas what this error is trying to tell me.. Is there a more permanent fix other that restarting the WLS process.
Thank youwow same case here in weblogic 10.2. But I have not deployed any EJB or JMS service . It shows in Console that "Mejb" Stateless service is running. I use https port from SSL mostly.
the error was:
The Server is not able to service this request: [Server:002623]Connection rejected, the server is in the RUNNING state. Starting service weblogic.jms.JMSServicePostDeploymentImpl, 120 of 122. Last service weblogic.ejb.container.timer.EJBTimerStarterActivator took 2ms.
The client could not connect to https pages then.
It occured for hours.
I saw a solution that said:
BEA-002623
Notice: Connection rejected, the server is in the state state.\r\n Starting service svr, num of total.\r\n Last service last took timems.
Description
Clients are trying to connect to the server before it is in the RUNNING state.
Cause
Clients are trying to connect to the server before it is in the RUNNING state.
Action
When I was not starting any service why should it say so?
I am in a big mess in my production server .
Dear oracle weblogic geeks please come forward and show your ability.
I cannot restart my server every 1 hour or 4 hour or 12 hour.
I use Jrockit 1.6
ojdbc6 driver
I also use a connection pool from with in Weblogic to test my Oracle 10.2 RAC.
let me know asap if any solution exist. -
Our website has been throwing the following error:
Fri Sep 29 20:17:12 PDT 2000:<W> <ListenThread> Connection rejected: Unable to read from the socket [host=63.36.158.35,port=2297,localport=80] Perhaps the client closed the connection.
Fri Sep 29 20:17:12 PDT 2000:<W> <ListenThread> Connection rejected: Unable to read from the socket [host=63.36.158.35,port=2301,localport=80] Perhaps the client closed the connection.
We have associated this error with a client message "Page cannot be displayed". But...we have not been able to find the root of these errors and have not been able to consistently reproduce them. What could be the cause? Can I configure the <Listen Thread> to accept more connections. Is there a singular cause for this problem. Any help would be much appreciated!
Thanks-
AdamI'm confused why you posted on the Tarantella/SGD Forum then?
Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html -
Connection rejected by server. Reason; Warning
Hello,
When I connect from FMLE to FMSS server I see warning in /var/log/messages.
Oct 23 18:44:56 post Javascript[1951]: Connection rejected by server. Reason : [ AccessManager.Reject ] : [ code=403 need auth; authmod=adobe ] :
Oct 23 18:44:56 post Javascript[1951]: Connection rejected by server. Reason : [ AccessManager.Reject ] : [ authmod=adobe ] : ?reason=needauth&user=administrator&salt=WT9Vaw==&challenge=6JSMIg==&opaque=6JSMIg==
Everything works fine. Should I be concerned about this message?
FMLE is win XP SP3 versin 3.2
FMSS is Linux RH6 version 4.0Darius, I think you'll get a better answer in the Flash Media Live Encoder forum:
http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions -
Hi Everyone,
i have installed FSM2 and IISwin2003 and Flash8 on the same
server,
my rtmp is : rtmp://127.0.0.1/myapp2/myapp2.flv
it works fine on local, but when a clinet tries to browse it
over same LAN , the client gets the error below :
Connection rejected by server. Reason : [ Server.Reject ] :
(_defaultRoot_, _defaultVHost_) :
Application (myapp2) is not defined.
what im doing wrong ? pls help..It because you're using the localhost IP, where you should be
using your LAN IP. -
Getting NetConnection.Connect.Rejected
I signed up with a FMS hosting service. They have a nice
interface where I was able to install an application. I called it
"simple", cause its bare bones simple. After installing, it gives
me the rtmp connection string. Problem is - I get
NetConnection.Connect.Rejected every time. I tried removing it, and
installing again. But same thing.
This is in frame 1. Is there something wrong with this?
my_nc = new NetConnection();
my_nc.onStatus = function (info) {
switch(info.code)
case "NetConnection.Connect.Success":
textbox.text = "success" + "\n";
break;
case "NetConnection.Connect.Rejected":
textbox.text = "rejected" + "\n";
textbox.text += info.application.msg + "\n";
textbox.text += "Event: " + info.code + "\n";
textbox.text += "Type: " + info.level + "\n";
textbox.text += "Message:" + info.description + "\n";
break;
case "NetConnection.Connect.Failed":
textbox.text = "failed";
break;
case "NetConnection.Connect.Closed":
textbox.text += "Connection closed.";
break;
my_nc.connect("rtmp://exx3333.rtmphost.com/simple");
(I didn't put in the exact rtmp string in there, since this
is a public forum)
The result I get printed out in the text box is:
rejected
undefined
Event: NetConnection.Connect.Rejected
Type: error
Message:[ Server.Reject ] : (_defaultRoot_, _defaultVHost_) :
Application (simple) is not defined.
But - the hosting service's interface panel shows that
application "simple" is there. I sent the hosting service a support
request, but I probably won't hear back from them until
Monday.Hi Cisco_s,
Your code looks good - I think there's nothing you can do
other than wait. Apparently there's something wrong with the VHOST
configuration on their side. -
Javascript[9970]: Connection rejected by server.
Dec 7 07:20:38 networkvision Javascript[9970]: Connection rejected by server. Reason : [ Server.Reject ] : Virtual host my domain is not available.
i cant logint to the admin console,
centos 6.4
32 gb ram
zpanelDarius, I think you'll get a better answer in the Flash Media Live Encoder forum:
http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions -
Rtmp flv stream problems (connection rejected for certain resource addresses)
Hi all,
I have a problem loading rtmp flv and mp4 files. Here are some example addresses I am trying to load:
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Brett_Yormark_Powershift_Sta ndard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Peter_Moore_Powershift_Stand ard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Danny_Jordaan_Powershift_Sta ndard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/leadersinfootball/Lord_Mawhinney_Powershift_St andard_16_9.flv
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/mp4:114/114_640x368.mp4
rtmp://s14swvywt7xype.cloudfront.net/cfx/st/mp4:boats-show-cannes-24-09-2010_1.mp4
None of these appear to work, however they do work with the original streaming player I created. I'm using an adaptation of the Strobe Player and an unmodified version of the OSMF framework.
I'm using a slightly modified version of the StreamingURLResource class when loading which adds some functionality overriding the mediaType getter, but I dont think that this is the cause because it simply returns the super.mediaType property unless the URL is a YouTube URL.
When I break into the class responsible for creating the NetConnection I notice that I always get a net connection rejected status.
Any help would be appreciated. You should find that this problem is reproducable with any of the example code on the OSMF website.
Cheers,
MatHi Mat,
I didn't manage to get your assets load either. Are they still up?
Ty the following assets with your modified Strobe Media Playback:
http://osmf.org/dev/1.5.rc1/debug.html?src=rtmp://sz612asgrc6v4.cloudfront.net/cfx/st/andr ian_adina_1&urlIncludesFMSApplicationInstance=true
http://osmf.org/dev/1.5.rc1/debug.html?src=rtmp://sz612asgrc6v4.cloudfront.net/cfx/st/mp4: Beowulf_1080p.mov&urlIncludesFMSApplicationInstance=true
(mind urlIncludesFMSApplicationInstance setting, which you need for accessing cloudfront assets).
Looking forward to your reply,
Andrian
Maybe you are looking for
-
Installed Office 2010. I have a Word document with links to an Excel document. The path for this Excel document has changed so I need to edit the link. In 2007, you would just click the Office button, then goto Prepare, then Edit Links but this doe
-
I bought a new macbook, but I can not install Pages for free
I bought a new macbook air, but I can not install iWork for free. Why?
-
Can't open ai doc from flash drive.
Hello. I run CS3 on my Mac, but have CS4 running on a PC laptop. Last night, I was working on a few ai files that I originally created on my Mac (in CS3). I had no problems with the files and saved them all directly to my flash drive. When I tried to
-
PSE8: Can't import a PSE6-Catalog
Hi forum, I just installed Windows 7 Home Premium on my notebook. It was a clean install - no upgrade! I installed the trial version of PSE8 - not problems. Now I started PSE8 and would like to import my PSE6 catalog from an external hard disk. The i
-
I try to import a library in aperure, it seems all working ok but the library is not imported and i have no masters in file library