Connection​s questions - Pavillion desktop and Samsung LCD TV

I have a Pavillion a1487c with a radeon X1650 series video card. It has 512 MB and two DVI connections, (NO VGA). My television is a Samsung LN-S4051DX with 2 HDMI, Component, and a PC VGA connection. I think the Sansung Manual says I can not connect to the HDMI onthe TV.
What is the best way to connect the PC to the TV?

As far as I can see, it hasn't anny sense to react, beause the question is dated in the year 2009. 

Similar Messages

  • I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    Hi ashleydanc588,
    If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Regards,
    - Brenden

  • Connecting a Macbook Pro to a Samsung LCD TV. Can anyone tell me where to find information on what I need and how to do it?

    I want to connect my 2009 Macbook Pro to my Samsung LCD TV. I am afraid to go somewhere and ask and get bogus information so am putting it out here to see if anyone can help with the how tos and the types of cords/adapters I might need to purchase.

    You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

  • MacBook Pro and Samsung lcd

    Ok so i have a 52 inch Samsung lcd...until a couple of hours ago everything was working perfect. I had my macbook closed, connected to the LCD, and i was using apple's bluetooth keyboard and mouse and it was just working perfectly.
    About 2 hours ago i decided to try to change the resolution on the screen to make things bigger. I changed to the first resolution and i reverted back to the original cause i could not see...i then did another resolution and i don't know what i did but now my screen keeps saying "mode not supported".
    I now have the display on mirror and i have my mac book open (by this i mean the computer's screen is working) and i can see perfectly on the samsung lcd...
    When i close the macbook pro though the samsung lcd goes black and then i get "mode not supported"...
    Is there any way to "restore" to the original settings i had before? i seriously do not understand why its not working

    OS X stored two different preferences for a given display depending on whether it is being run as a sole display (lid down) or a second display (lid up). Unfortunately, the value stored for lid down currently is not useable, and every time the Mac is put in lid down mode, it keeps reverting to that same value.
    If you follow the instructions at the bottom of the page in the following link about dealing with the windowserver.plist file, you should be able to get back to a fresh start.
    http://support.apple.com/kb/TS2084

  • Audio/Video input via RCA connection on HP pavillion desktop PC

    I have an HP pavillion elite hpe-360z CTO desktop PC running Windows 7 Professional (64 bit).  There are a number of interface connections in the front, including USB 2.0, I394, S-video, and RCA (A/V In).  I want to input video from a camcorder into this PC via the RCA connection, but I can't seem to get it to recognize that there is anything connected there.  Is there a driver I need to get to make this work?
    Thanks

    Hi,
    As from your original message which says your machine has a wirefire port. Canon ZR70 use miniDV tapes therefore a firewire cable is a perfect match for this situation. The camera may use 4-pin connector and computer normally uses 6-pin connector. As mentioned above, one cable similar to one of the following cables will definitely help.
      https://www.google.com.au/search?q=4+to+6+pin+firewire+cable&hl=en&tbo=u&rlz=1G1GGLQ_ENAU282&source=...
    Regards.
    ps You may need driver for the Canon.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Using Cinema Display and Samsung LCD with One Mini

    I have been trying unsuccessful to output the DVI of my mini to my 23" Apple Cinema and my Samsung 4669F (native resolution of 1920x 1080p). I have tried various methods including using the Gefen 1:2 DVI Splitter (Ext-DVI-144) and a DVI-HDMI cable to the samsung in conjunction with SwitchResX, all to no avail.
    Any help?- I wish to mirror the same display on both LCD screen simultaneously?- However, I would settle for a solution of a convenient A/B switch? ANy tips?
    What about an external USB video card for the Mini- that should work too?- any tips?
    I used SwitchResX because I determine that because the 23" ACD was 1920 x1200, the Samsung was not displaying because the Gefen splitter box was sending the same signal in 1920 x1200 to the Samsung, which was not accepted by the Samsung whose native resolution is 1920 x 1080p. However, once I switched the resolution to 1920 x 1080 to force an out of the mini to that resolution, there was no display at all on the 23" ACD and I had to do a safe mode reboot to recover the display on the 23" ACD?-
    One would think that it would be relatively easier for Apple to create a script that would allow a person to display 1920 x 1080p on the Cinema Display, a script that overrided the message from the ACD that tells the mac mini to stretch any resolution to 1920x1200 before it gets to the 23" - This way I could use SwitchResX and the Gefen splitter to output 1920x1080p to both displays at once (of course the 23" ACD would have to have some black borders on the top and bottom. Why doesn't apple make this available? - Spent $900 on this monitor and the Mini has a DVI output- why should the Gefen splitter be rendered useless simply because my other display is a different native resolution.
    Message was edited by: sidebysidefootball

    Of course it is!
    (I've got this problem for 3 month now)

  • Connecting my Macboook late (2008) to samsung LCD TV

    I heard that this minidsplayport can get the job done, but are there other products to connect both audio and video to display on my television besides the product listed below?
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

    When you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
    With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • License question: My desktop and my laptop

    Hello!
    As I understand it, Adobe allows for instillation of their software on two machines, along as the software is not used concurrently. I'm getting a laptop for Christmas, and would like to load my copy of Final Cut Studio 1 on the laptop. Do you guys know if the license allows for that?
    I am going to read the license as soon as I post this message, but those things are dense and I might pop back here to find an answer before I find the answer in the license.
    Thanks!
    CMF

    The FCP license varies between versions.
    V5.1 and above allows the software to be installed a laptop and a desktop provided:
    1. both machines are owned by you
    2. the are not used concurrently.
    have fun.
    x

  • Connecting powerbook g4 to samsung lcd le32 r7

    does anyone know how to connect a powerbook g4 to a samsung lcd le32 r7. At the moment im using a dvi to vga adapter. The mac can see the tv but the tv cannot see the mac. i have tried different modes on the tv and different screen resolutions but none seem to work. The adapter works fine with a normal crt monitor is it worth buying a dvi to vga cable or does anyone know how to get it to work via dvi hdmi?
    powerbook g4    

    I would use a DVI to HDMI cable, and you'll have to use a separate audio cable also. A number of people on Amazon have recommended http://www.monoprice.com/products/department.asp?c_id=109 as a good cable source. If you look in your Samsung user guide, I think you'll find that S-video doesn't support as high a resolution as HDMI.

  • Windows 7 desktop and windows 8 desktop connected to router

    I have a windows 7 64 bit desktop and a 7510 e photosmart printer connected wireless, though the desktop is wired, I purchased a windows 8 desktop and connected it to my router and set up my email account and it did pick up my printer and could print but not scan or EFax, now I get a 1625 message and cannot print from it.
    I tried to download the print and scan wizard from HP web site but my PC froze up.
    Do i have to run the disc or set up a home group, not bothered about being able to E Fax or scan to email with it, just need it to print as it did before.
    Also on my windows 7 I can log into HP connected and my printer shows up ok, when I press the icon on the printer for Eprint it shows my HP email address but when I press the Fax icon it says NOT CONNECTED TO ANY NETWORK. Cloud services set up a static IP address for me last year as each time we had a power outage I lost my connection to my printer. If anyone can help I would appreciate it.
    This question was solved.
    View Solution.

    Emma22, welcome to the forum.
    Here is the Win 8 driver for the printer.  Installing them should correct your problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How do I connect my iMac to my Samsung LCD TV?

    I want to connect my 2009 iMac, Mac os x version 10.5.8 to my 2008 Samsung LCD TV, model LN32A450C1D.  Does anyone know what cords I will need so I can watch videos from my computer on my TV?
    Thanks.

    Your mac has a mini display port so you'll need to adapt that to HDMI on your TV. I have a mini display port to DVI that I bought from the Apple Store, then a DVI to HDMI adapter. Be aware that this will only carry the video signal, you'll need seperate audio cables to carry the audio signal. You can buy adapters for cheap but I've read of some people having problems with no name adapters working with their Macs, so I spend a few more $$ and shop at the apple store.

  • Trouble connecting Macbook to Samsung LCD TV

    Hello,
    I tried connecting my Macbook to my Samsung LCD TV (through a DVI to HDMI cable) but I only got a black screen and "No signal". The macbook detects the Samsung and even displays "SAMSUNG" as a detected display.
    I checked the TV manual and there I found "Don't connect a PC or laptop computer to the HDMI/DVI connectors (it will result in a black screen)"
    Does anybody know why? Any solution?
    Will this happen with a MacMini too? I had the intention to connect it to my TV and use it as a media center

    Sorry to tell you that DVI does not support sound.  You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
    Ciao.

  • How do i connect mac book pro 5.5 to samsung lcd tv (series 5)?

    i have a macbook pro 5.5 and tried to connect it to my samsung lcd tv series 5 -  i have mini display port to hdmi cable, hdmi cable and phono to rga cable - i can see screen but cannot hear any sound... can anyone help?
    thanks

    I assume you mean rca... what is happening is you're outputting digital sound via your hdmi. Phono or anything analog will not work if you're playing using hdml, because it plays both sound and sends video. what you should do is plug the hdmi cord from your mDP directly into the hd tv, then run whatever sound output the tv has to what i assume is a reciever for sound. Let the tv decode the audio to then output to your "phono" or "rga".

  • Ipod Classic 120gb to Samsung LCD TV and Home cinema

    Any help or suggestions would help.
    I have just bought a New Ipod Classic 120gb and connected it to my Samsung LCD TV and Home cinema systems. The Ipod connects fine but the order of the music on the tv is all mixed up. Is there anyway to sort out the order so it displays in album or even artist order?

    Yes, I bought the dock so I could hook it up to my tv. Then I had to buy the cable, I didn't get the cable from Apple. at the time the cable was $50, I went to ebay & found the same cable for about $20. Just like you, I could not find an answer about why the dumb thing wouldn't work, so I just had do my own experiments. Good luck getting Apple to do anything. They don't seem to want to give anything away or replace merchandise.
    Take care!!
    H

  • Connecting my old iMac G4 to my Samsung LCD TV

    I have an iMac G4. The monitor went out years ago and I have been using an external monitor via the display port and adapter. The resolution on the iMac is set to the highest available on the display preferences. The monitor has always worked fine; however, I thought I would connect the iMac to my Samsung LCD TV (it's a few years old - 5 Series 1080). When I connect it to my TV via the "PC" connection option and select "PC" as the source, I see the splash screen (gray), but when the OS boots my TV says "Mode not supported." Anyone have any sage advise for me . . . I would love to utilize my old iMac for renting movies from iTunes.

    TVs have very specific resolutions, and your iMac predates widescreens in anything but movie theaters. So long story short, since your iMac can only mirror your built-in (well, attached in the case of the G4 models) you basically have a choice. Either the monitor runs at a resolution the TV can support, which is probably going to be 720x480, you get a special converter box, or you just come to the conclusion most do, and decide it's really just not worth the effort.
    If you had one of the newer iMacs where it's either a native 16:9 resolution or you could at least set an independent resolution, this would be much easier. As it is, you're pretty much screwed, sorry.

Maybe you are looking for

  • Line item wise billing

    Hi All, Can we do sale order related billing for individual line item wise and quantity wise? If this is for delivery related billing then the setting will be in item category, billing relevance as K. But what will be the settings for order related b

  • Transaction Currency

    Hi All, I have a report requirement as below...... I need to display the key figure data based on <b>transaction currency</b>(0curkey_tc). In my transfer structure this 0CURKEY_TC is mapped to RTCUR(R/3). In my standard cube i have only two key figs

  • Command-C is not working consistently to.

    Command-C is not working consistently for me. In multiple apps, but mostly in Word, I find myself pressing Command-C and then Command-V to paste and what I paste is the LAST thing I copied, not the most recent. I sometimes have to repeat teh sequence

  • Wildo i get charge again if reinstall a purchased app that was deleted bu accident?

    Will i get charge again if i reinstall a purchased app that was deleted by accident?

  • Kernel panic driving me crazy

    Hi there! Please assist me with the following kernel panic. It seems to be active when I use MS powerpoint in Office for mac 2011. Even safe boot does not stop the crash. I have to keep force boot several times before it starts correctly again. Here