Connection selection for nokia n8 camera location ...

So I am trying to use the camera location feature but my phone keeps trying to connect to contract wap.. I am on a payg plan.. why can't I pull the location under these circumstances? Ovi maps works just fine trying to locate the position under payg connectivity...
Also, the OVI store sometimes does not connect under wifi or payg internet/wap connectivity...
This whole business of network selection is absurd. It is good to provide a system-wide and/or app-specific choice if you insist on creating this distinction...

No one is prevented from using AGPS, but the fact it uses a data connection means you have to pay your Service provider for the data NOT Nokia. Having a smartphone without some sort of data plan or allowance is really restricting it's functionality and it's a really good idea to get some data allowance to get the full benefit of the phone, if not it would be far cheaper to get a cheap feature phone, a tom tom and a mid range digital camera !! I am constantly amazed that people are buying very expensive handsets and then worrying about data charges
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Find a soulation for nokia 5800 camera

I THINK THAT THE PROBLEM OF THE CAMERA OF NOKIA 5800 IS BECAUSE THE IMAGE PROCESSING AS IT APPEARS AFTER THE TEXT OF THE IMAGING CAMERA IS BEING PROCESSING THE IMAGE BUT UNFORTUNATELY NOT DONE PROCESSING . I HOPE THAT THERE IS A SOULATION TO THIS PROBLEM FROM NOKKIA OR ANY ONE CAN HELP WITH THIS PROBLEM.THANKS...

Hello, MRBOOTS4u.
Thank you for posting and welcome to the Nokia Support Discussions!
Where are you located? If you are located in India, you may go here: https://oxicash.in/recharge/nokia-music.aspx to purchase a Nokia Music Voucher.
Note that the said service is currently available in India and China.
Let us know the outcome.

Packet Data Connection setup for Nokia 5800 on Tel...

Need help, purchased a Nokia 5800. Telus will not help me set it up for browsing, but they gave me thge APN, Proxy and Port. Can someone point me to where I need ot input it?
My geuss is
Access Point
Internet Connection
Advanced settings
Network Type - IPv4
Phone IP address - 74.00.0.00
DNS - Automatic
Proxy server address - sp.telus.com
Proxy port number - 80
Help anyone?

Juravial wrote:
Need help, purchased a Nokia 5800. Telus will not help me set it up for browsing, but they gave me thge APN, Proxy and Port. Can someone point me to where I need ot input it?
My geuss is
Access Point
Internet Connection
Advanced settings
Network Type - IPv4
Phone IP address - 74.00.0.00
DNS - Automatic
Proxy server address - sp.telus.com
Proxy port number - 80
Help anyone?
In menu-> settings and connectivity-> destinations-> accesspoint as decribed on page 75 of the English manual.
http://www.nokia-asia.com/support/product-support/nokia-5800-xpressmusic/guides
The IP address can't be right anyway
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Settings connectivity settings for nokia N8 does...

i have a problem with my nokia N8 that when i try to go to Settings>>connectivity>settings> its again reverts me back to the main menu.....kindly please help me how to slove this problm/
thanks in advance.

You should also be able to set all wigets to offline from options on homescreen ? And if you can get into connectivity settings, set phone to Offline , then edit all access points to always ask, then decline when you don't want an app to connect to the web !!
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Pc connectivity steps for nokia 3100 using usb port

hi
i am using dku5 driver and pcsuite to connect
my mobile to pc do i need to select getconnected button
every time i start the computer
please give the connectivity steps
i am new to j2me

I am also having this problem with my mp3 player. When I plug it in by USB to my mac, the icon does not appear on the desktop and I can't find it at all in system preferences. I have tried it on a couple of different imacs and the icon pops up immediately. So I am thinking it is a problem with my computer....does anybody have any advice??

How do I do port forwarding on my airport extreme for my IP camera (foscam)?

Hi,
I've been working on this for what seems like a week. I purchased a wireless security camera to put in my house and to see from my laptop (or IPAD2) when I'm away. I am able to see it from either device when I'm here at home, but not when I'm out on the road.
According to the instructions for a mac setup, I needed to set up a DDNS service and get a free account at DynDNS, which I did. They also told me to use a different port than 80, suggesting 8081 as the http port which I plugged in to the camera device setting.. The next step is to do PORT FORWARDING and then I should be able to use my DDNS domain name and port number to login to my camera anywhere...
I'm stuck in how to do this with my airport extreme. I see where I have to go into utilities and click on airport utility, and then manual set-up..
Right now when I click on the Internet tab at the top I see the connection sharing is off (Bridge Mode), and that I have to change it to share a public IP address to get DHCP and NAT to appear in the tabs..
when I go to NAT, the box for enable NAT port mapping protocol is checked and then there is a tab I can click on that says Configure Port Mapping.
I know that I'm supposed to click the plus button + to enter a service and a port and here's where I get stuck
when I click the + button I can either click on the choose a service tab, which then drops down a list of services like Personal File Sharing, Window Sharing, Personal Web Sharing, Remote Login SSH , etc, or just keep it where it says choose a service and not choose one of the services.
Then there are some boxes to fill in for Public UDP Port(s), Public TCP Port(s), PRIVATE IP address-where the only numbers I can change are the last ones and I don't know if I'm supposed to put the IP address of the camera or what? and then the boxes for Public UDP and PUBLIC TCP.
I tried a few times to fill out the port numbers to 8081 (the one I selected for the IP camera) but I don't know what to do for the private IP address. When I changed the last numbers to the IP address of my camera, and went to update, it told me that I had to correct the 2 problems before updating:
DHCP beginning address, and dhcp ending address...as the DHCP range you have entered conflicts with the WAN IP address of your Airport wireless device. So I cancel and am stuck.
Sorry this is so long.. but I really can't get anyone to help me figure this out.. The camera company isn't answering ..
Thanks!!
Barry

Thanks for the info. I checked the model number on the Westell site to get info on the device. From Westell's info.....
1. Product Description
This ADSL modem is a NAT router with a four port 10/100BaseT Ethernet switch, a USB port and 802.11g wireless interface.
So, while you might refer to it as a "modem" ( a modem will only have one Ethernet port), you have a router or gateway. A gateway is simply a modem and router in the same box.
With the AirPort Extreme, you have 2 routers on the network. Basic networking rules dictate that when there are 2 routers, the first....your Westell.....must handlde DHCP and NAT, and the second router....in this case the AirPort Extreme....must be configured to operate in Bridge Mode so that it will function correctly on the network. That's why the AirPort Extreme is in Bridge Mode. That is the correct setting on your network.
That's also why you were getting the error messages when you tried to configure the Extreme as a second router.
As I mentioned before, any port mapping or port forwarding is going to have to be set up on the "main" router....your Westell. It cannot be set up on the AirPort Extreme.

Connectivity cable for 2700 Classic

Is it possible at all to obtain a connectivity cable for Nokia 2700 classic. The website doesn't list it and stores don't seem to have it! Merry Christmas and a great New Year!

I suspect it is the CA-101 but can't confirm this. You can also connect your phone to pc using bluetooth.

HT5467 iPhone iOS 6. What is the difference between, respective purposes, and functions of having both location services for photos vs camera

What is the difference and respective functions of turning on or off location services for "photos" and "camera" ? I guess I don't see what purpose of having the option for photos location services in addition to the camera option?

Thanks,
one hypo:
If I always had location services off for the camera, while taking all my photos, then there should be no metadata embedded at all in the first place, so then the photos selection becomes redundant?

HT4106 I have a camera connection kit for my ipad 2. Can this kit be used with my new ipad air?... If so what adapter is required please

Camera connection kit for ipad 2. Can this kit be used with ipad air and if so what adapter(s) are required please

You can try the 30 pin to lightning adapter but I'm not sure if that'll work. So if you get it to experiment, make sure you can return it. Apple does sell a SD to lightning adapter for the newer devices. So that should be a sure bet. The main downside is that your 30 pin camera kit came with both USB and SD for 29 and now the USB adapter is 19 and the SD adapter 29, so more expensive.
You may want to look into third party adapters, but make sure you use a reputable manufacturer (ie not a cheap no-name off amazon) because iOS7 brought with it software that looks for a signed chip in the adapter. And a chip is 'signed' when a company gets apple's permission to make accessories. I would suggest sticking with companies like Belkin, Kensington and Targus. They seem to be of a better reputation when making things and would have a signed chip.

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

Nokia pro cam for lumia 920

Hi I have a nokia Lumia 920, I updated it to amber using nokia software updated for retail. At that time I was able to install nokia pro cam, but I had to reinstall amber because of minor problems and when I tried re installing pro cam it said "this app does not support your device". Please advice me what to do, I really love the pro cam app

http://discussions.nokia.com/t5/Nokia-Lumia/Nokia-Pro-Cam-on-Unlocked-Roger-Lumia-920/m-p/2103131#M6...
The silence will fall

How to use the camera connection kit for iPad 3rd generation?

Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...

This is how you use it.

Camera Connection Kit for iPad 2?

Can anyone tell me when or if there will be a camera connection kit for the iPad 2? The kits that were release for the iPad do not fit properly in the iPad 2. There is a large gap and I am worried it will eventually cause damage to the port. I could not find much online so I thought I would ask here. Thanks

There is only one connection kit, and do not seem to be any plans for adding an additional kit. Just like the 30 pin sync connector, the connection seems limited, but was never designed to leave the connector in place, especially while carting the device around. I use my original camera kit with my iPad 2, without issues.

(makeshift) case for the iPad Camera Connection Kit?

Has anyone found anything that would make a good case for the iPad Camera Connection Kit? i'm afraid I will lose mine if i don't put it in something, but i do want to keep it small

Go to the dollar store & get a cheap cell phone case. You might be able to get a case large enough that will also store the USB cable.
 Cheers, Tom

How to do range selection for connected clips?

How to do range selection for connected clips? Whenever I press I or O, it only selects the primary storyline. I want select a portion of the connected clip and trim it.

If you're using the 10.1.x, and if you set the playhead, so that the circle is over the connected clilp (you don't even need a range selection OR have the clip selected) you can type Option - [ to trim from the beginning of the clip to the playhead; you can type Option - ] to trim from the playhead to the end; or if you do set a Range selection, you can type Option - \ (backslash) to trim both ends off the clip preserving the range selection.
If that circle isn't over the connected clip you require (perhaps you have a stack of clips) then you will need to click on the clip you need to have selected for the trim operation.

Connection selection for nokia n8 camera location ...

Similar Messages

Maybe you are looking for