Connection SEM 4.0 and BW 3.5, after upgrade R/3 4.6C to ECC 6.0

Hello experts,
Currenctly my customer has the following systems:
BW 3.5 with software component SEM 4.0
R/3 4.6C without software component SEM
ECC 6.0 with software component SEM 6.0 (Development system, I cannot connect the BW system to this one!)
Next week my customer is going to upgrade R/3 4.6C to ECC 6.0 (Test system).
I have to investigate if this upgrade does not influence the communication between SEM 4.0 and BW 3.5, if I connect BW 3.5 to ECC 6.0.
According to the blog: /people/karen.comer/blog/2006/12/19/confused-about-business-planning-releases-between-sap-sem-and-sap-netweaver-bi
SAP SEM is an add-On on top of SAP BW / SAP NetWeaver BI.
This blog also states that:
SEM 4.0 should work with BW 3.5
SEM 6.0 should work with Netweaver 2004s (BW 7.0)
Now I have the situation that software component SEM 4.0 is installed in BW 3.5, and SEM 6.0 is integrated in ECC 6.0 because it is part of Netweaver 2004s.
Does anyone know if the upgrade to ECC 6.0 has influence to the connection between BW 3.5 and SEM 4.0??
Tnx for your help!
G.

>
Markus Taxacher wrote:
>Is the only possible way to migrate the BW 3.5 to ERP/ECC 6.0?
> Whats the easiest way for upgrading to 6.0?
>
> Best regards,
> Markus
Hi, you cannot use BW3.5 you must have BI7 (not ECC6!) to install BCS 6 - BCS sits on BI (formerly known as BW).
It doesn't matter what version of source system you have, you can still collect data from ERP 4.6, you don't necessarily need ECC6.

Similar Messages

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

I get a black and white logo and a progress bar after upgrade ipad2 5.01

i get a black and white logo and a progress bar after upgrade ipad2 5.01

See this page : http://support.apple.com/kb/HT4097 - it covers :
iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.

Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
Regards,
Colin R.

HT4946 hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

Hi,
usually when you upgrade, it should not delete your files, but if it happens, than you should have a backup.
Unfortunately it is very common, that people don't know, what exactly is in the backup.
The question is, what files exactly you are missing? Own pictures, or taken with the device? Purchased music form the iTunes Store, or own? ....
Documents and files are mostly up to the developer of the app, if they are part of the backup, usually not and you need to transfer them before.
In the backup you will find just pictures from the Camera Rolle folder, everything else you should have on the PC, if you had it on the device.
Same then for music, you can transfer purchased music from the device, but your own works just one direction, from PC to device, from device to PC it doesn't work.
In future I recomand you to be sure how the backup works or use a 3rd party app (iExplorer) where you have a little bit more "freedome" than with iTunes.
Or you maybe just restored from the worng backup

My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

check and make sure that an alert style has been choosen for certain alerts, and make sure you check your sounds in settings

Why is my iphone coming on only connected to a PC and then shutting down after 1 minute???????

Seriously need help. My phone is going crazy right after ios is installed. It turns on only with a PC and then shuts down after 1 minute? Never thought Id have problems with Apple.

I have had the same problem with my daughter's IPOD nano. Spoke with several technicians to try to fix the problem to be told it was a battery problem and to send it in it was covered under warranty. Was told that it was a problem with many of the nanos. I sent it in to have it returned with 1 week stating that it had "liquid spill or submersion damage indicated by the pink/red color of liquid submersion indicator located inside headphone jack." It has not had liquid or submersion damage and I can't prove otherwise. It works only if it is attached to computer. Will not turn on unless attached to computer. Maybe I am wrong but it it has damaged by water would it still work plugged into computer. Now I am out $200.00. This frustrates my because my ipod shuffle quit working 2 months after I got it. Thats why I bought the nano thinking it was better quality.

Internet and more not working after upgrading to iOS 8

After upgrading to IOS8 - I had multiple issues
Network Connection is shotty and disconnects after clicking few sites
Email gets stuck
There is some sort of a bug(s) system is not stable.
Safari is not working
Apple needs an update or patch very soon.

Sept. 22, 2014 Hello everyone finally a solution - The issue is with the 5GHZ networks. Reset your network of your IPAD and/or IPHONE and connect to your slower 2.4GHZ network - So far issue is fixed but for gamers and serious bandwidth absorbers, it might be a disappointment with the 2.4GHZ.
Let's face it, it's better than the sporadic network drops.
My Movie connection was uninterrupted.

Unable to connect to the itunes store on my laptop after upgrading to ios 7.

I have Windows XP - Service Pack 2 and after upgrading my itunes to ios 7, I am unable to connect to the itunes store. Every time I click on the itunes store I receive a message that says "itunes could not connect to the itunes store. An unknown error has occurred (0x80092013). Make sure your network connection is active and try again." Every other device in my house is hooked up to the internet and I am having no problem browsing the internet on this computer. I tried completely uninstalling all itunes and apple software from my computer and re-installing it and nothing has helped. Any advice?

Hey HeatherBanker!
Here is an article that will help you troubleshoot this issue with your connection to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Take care, and thanks for visiting the Apple Support Communities.
-Braden

No Airport Access and No Keychain Prompt After Upgrades

I have recently experienced instances where I updated software, e.g., the recent Security Update and a recent Quicktime update. Upon rebooting, the Airport "fan" in the menu bar shows no signal, and I cannot access my Airport network. I have rescanned using the Airport Admin Utility, but it does not recognize the base station.
In the past, after about three hours, I finally get the prompt advising me that Airport needs to access my keychain, and when I authorize it to do so, all is fine. (I am hoping that happens again in a few hours.)
This has happened on both my iMac and my iBook (both running OS 10.3.9). Has anyone else experienced this? Does anyone have any insights about this problem?

I am having a related problem; I intend to post here and in Panther Networking under the "Security Update" problem thread.
I have Panther 10.3.9 on a iMac G5. It is connected to the network via Airport through a Belkin router (connected to a cable modem) using 128-bit WEP. I have 5 users on the computer (one for each family member.) On Friday I Software Updated Security Update 2005-008. Since then, everytime anyone switches to a different user, Airport drops the connection to the router and takes the computer off the network.
I have now logged into each account, connected to the router each time and typed in the 128bit hex password saving to each person's keychain. Now, when people switch to a new user, it still drops the connection but they can point-click re-connect without having to enter the password.
Resetting the Keychain using Keychain First Aid didn't do anything for me but lose the password. I don't see why I should even consider flashing the pram. I am hoping Apple fixes their bug.
---Cris

Doubts about ipad 2..and problem with safari after upgrading iOS 6

after upgrading it to iOS 6 my ipad 2 safari black outs and then all d pages r again reloaded...is thos sign of virus in ipad? plzz reply and 1 more thing is where does safari browsing data and diagnostic n usage reports goen when we connect ou ipad to pc? is it dangerous that any 1 can hack my personal information...where to find it for deleting it..thanks...:)

Don't you use spell check? It really hard to read your SMS style of writing.
sarahgirl123 wrote:
When i connect my ipad to pc...itunes opens n den and in d syncing process it says downloading safari browsing data...what does that mean?
It means that those fraud website urls are updated so that it can warn you if you try to visit those website.
Try restore from backup using iTunes.
If no joy, restore as new without the backup.

Ipad 2 and Iphone 4 hybernates after upgrade to IOS 6

Hi , After upgrading my iphone 4 and Ipad 2 to IOS 6 , both devices go in "hibernate" mode after being idle for a while. The only way to open them is by hard rebooting. Have you expirienced similar problems ? Is there any solution to fix it ? BR Robert

Andrew is partially right. With apps that are still running, they are running regardless of being suspended or not. A restore should be her last option. as she will lose anything added since her last back up. And there should be NO reduction in speed as the update was made compatible with all phones included in the update.
I recommend the following.
1st, delete all apps on the phone that are not being used. They take memory and speed since almost all apps run in the background checking for notifications.
2nd, go disable all notifications you don't need. This will help with speed AND battery life.
3rd, location services.... Go adjust this... if you don't NEED it on, turn it off. It will reduce usage on the phone, and again save ALOT of battery life.
4th, organize apps into folders. this will ruduce "pages" on the phone, and increase speed.
5th, clear browsing history.
6th, delete emails, texts, contacts that are not needed. ESPECIALLY Spam folders!! some of us never clear spam, and there could be a large amount.
7th, Do a hard restart. While the phone is powered on, hold the home button and power button down at the same time. Keep holding while the phone suts down and keep them held down until the Apple logo reappears.
If this does not help, then she needs to take a record of all contacts shes added since her last back-up, email all photos taken since her last back up, so she can save them back to the phone,(DO NOT rely on photostream, because once the restore is done, those photos will be taken from the stream.) She will need to do the restore off her computer and the update through iTunes.

IPhone will not synch contacts and calendar with Outlook after upgrade to 4

I have been using an ACT! database on a PC for years, synching to Outlook with CompanionLink, and synching my iPhone to Outlook. After upgrading my iPhone to 4.0, I can no longer synch my contacts and calendar from Outlook. It "goes through the motions," appearing to be synching. But in the end, nothing changes. I have reloaded iTunes. The problem is between Outlook and the phone (the synch from ACT! to Outlook is fine).

I'm having the same issue. Upgraded my 3G to OS4 which wiped out my contacts from the phone. I also use CompanionLink (Express) to sync ATC with Outlook and iTunes and the phone. Have spent hours/days on the phone with second level Apple tech support to no avail. CompanionLink IS syncing with Outlook but Outlook isn't syncing with the phone. Have tried syncing to Outlook directly (without CompanionLink) but no good result. Tried syncing through MobilMe. Can sync all Outlook contacts from my computer to me.com through MobileMe but does not sync with the phone. Tech support suggested trying to sync fewer contacts at a time as their might be a problem with the contacts file. DID manage to get 4000 of my 5600 contacts back in but can't get any more in. Previously had NO problem syncin all contacts directly and through CompanionLink. VERY frustrating.
Also, I use Outlook Express for email. Since installing MobileMe I get an error message saying that Outlook isn't my default mail handler and I need to change the settings to make it the default mail handler. I DO NOT have "sync mail" checked as I'm not trying to sync my email accounts...only contacts and calendars. Made Outlook the default mail handler which stops the error message but still can't sync the contacts and I want to keep Outlook Express for email.

"manually manage music and videos" setting disabled after upgrading iTunes!

Hello every one.
I used to manage my musics and videos manualy , so naturally "manually manage music and videos" check box was always "cheked"
Now after i upgrade my itunes to latest version (11.1.3.8), i find out that option is "Unchecked"!!
So i am not able to copy any music or video or book too my iphon !
If i try to enable that option again, it will clear my libraries and i will lose anything.
Why this happened? what can i do ? any workaround? seems like a bug to me. i didnt do anything just updated my itunes. that option was enabled on my iphone for like 3 years! now i just upgrade my iTunes and that check box is unchecked.
It seems stupid itunes think its another machine and says " it is synced with another library"
Any suggestion please?

Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

Cell Definition and Reverse sign Issue after upgrade

Hi ,
we are having a issue here after upgrade to BI 7 from 3.1c .
There is a Collision between Cell Definition and Reverse sign in the query designer.
Issue is . We have Key Figure "Net Days AR" which has Reverse Sign Checked under properties. In 3.1c when we ran the report the Net Days AR would get value like for example -40 . but now after upgrade to BI 7 SP 16 we are getting value 40. the negative sign is missing. The formula is correct.
I went and checkd if we have any cell definitions defined on this and found the cell definitions onthis keyfigure.
values are comming correct if there are no cell definitions.
Thanks in Advance and Points will be awarded.
Thanks,
Reddy

we have the same problem. In BI 2004s with BEx 3.x when the cell reference is defined, the reverse sign flag is ignored.
I opened a message to SAP. Until now no solution and I think we'll never receive solution. Here are the answers we received:
SAP
I have to say this is the limitation of front end 3.5.
In designer 3.5, it works this way:
When you define a cell referance, this cell is blocked from change of the column property change. No matter how you change the column key fig proerty, it keeps the original status when you define it.
If you want the defined cell property, you need to delete the cell
referance, change property, then redefine the referance.
I agree this is very inconvinience, that's why I would recommend you to use query designer 7.0 if possible. With 7.0 front end, you can define separately the property for defined cells. It is more flexible.
ME
At the moment it is not possible to migrate to 7.0 frontend.
I tried to delete the cell reference, change properties and redefine the reference. I tried to create new columns, define cell properties, save and define the cell reference. I tried several different combinations...
No way, as soon as I define the cell reference, column properties are ignored.
1) How can we restore the correct behavour of a query in frontend 3.5?
2) If we found a way to restore it, we need a smart procedure to modify all our existing queries (including how to identify those affected by this inconvenience).
SAP
For front end 3.5, you need do following:
1. delete cell referance
2. change the column property (such as tick on or off the sign reversal)
3. re-define the cell (this cell will with the new sign status)
4. define formular base on cell
After step 3, you can't change cell property whatever you do in
column property. This is the designed behavior.
If you want to change property after step 3, you need to start
all over from step 1.
ME
I did it.
Don't work. When I define the cell reference, column properties are ignored.
SAP
It seems there is some issue in front end.
Do you use the front end 3.5 with latest patch?
Could you please check front end installation as per sapbexc.xla (described in note 197460). If there are problems shown within this check do the following:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -'REMOVE SAP FRONTEND'
- Install the lastest frontend and GUI patch (according to note 496977or 496989 again and check the installation).
ME
I don't think so. I am using:
Sapgui 7.10 Patch 8
Bex 3.50 Patch 3
Bex 7.x Patch 5
to be continued...

Connection SEM 4.0 and BW 3.5, after upgrade R/3 4.6C to ECC 6.0

Similar Messages

Maybe you are looking for