Connection Server Failed in SAP BI 4.0

HI
We have installed SAP BI4.0 on Linux server.
Able to login to CMC but connection server and  and web intelligence servers  are failed . We tried to start the server but unable to start the server .
We have restarted all the servers still  connection server and  and web intelligence servers  are failed
Please advise
Thanks in advance

Hi
Please locate the boconfig.cfg file e.g. /home/bi4/BI4/setup/boconfig.cfg
If the file has only a few entries it is most definitely corrupted. Check if the boconfig.cfg_old has more lines, if yes make it boconfig.cfg
If that still fails:
- Restore the boconfig.cfg from a backup
- Copy the boconfig.cfg file from a working BI4 system
Then restart BI4
Regards
Roland

Similar Messages

  • "Cant get Mail-Connection Server failed"

    I just applied the new Apple ios update to my iphone 5c,and now I cant get to my emails on my yahoo account.  the message says " Cant get mail - Connection Server Failed"  please let me know what I need to do to fix this problem.

    Yahoo's server is a known issue.
    try to delete the account and read it, or use the yahoo email app.

  • Updated to ios 7 cannot get mail the connection server failed

    I updated to ios 7 yesterday and today I keep getting "cannot get mail the connection server failed". Also the safari gets stuck or takes awhile to load the page

    Was there ever a response/solution to this? There's plenty of occasions where this seems to have happened but this thread is exactly what's happening to me. I am currently in Spain and trying to use Yahoo mail.
    My mail is updating occasionally but if i try to force an update i get "cannot get mail...the connection to the server failed". Also if i try to send and email i get "a copy has been placed in your outbox....the connection to the outgoing server apple.smtp.mail.yahoo.com failed...additional servers can....."
    I checked my mail settings and the defined server isn't prefixed with "apple".

  • Mail connection server failed

    I connected my Gmail account to my I Phone 4S yesterday and it worked perfectly. Today when I click on mail, i get an error "Cannot Get Mail...The Conection to the server failed". I tried deleting and re adding my mail account several times and nothing works. Does anyone know how to resolve tis error?
    Thanks!

    Can you access the account on another device:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    -Go to Settings>Mail>the account and turn it off and then back on
    - Go to Settings>Mail the account and delete the account and reenter the settings.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • Canon Pixma Wireless connections "server fail"

    I have a Canon Pixma 5220 printer which has worked flawlessly (wirelessly) for quite some time. A few weeks ago, we changed our router from a password protected setup to non-password protected (don't know the technical terms for this) as a couple of our smart phones would not connect with the router in order to use the wifi. (there might have been a better solution, but being non-techies, we didn't know what it was). Since doing that, I have not been able to get our Pixma printer to connect wirelessly. I deleted the printer entirely and went through the install procedure with the CD, but it will only show that a job is "pending" (which I guess means it's connecting wirelessly to some extent) and that the printer is "offline". Also, when I look at the Network Diagnostics, it shows everything working, but the server shows "fail".  I'm sure there are some tweaks that I need to do, but I'm at the end of of my knowledge base.  :-\   Also, in the meantime, I had my Macbook Pro repaired which means it was wiped clean, so that may have changed something as well. I'm running Mac OS X 10.6.8.

    Hi robe427,
    Welcome to the Support Communities!  The articles below may help you troubleshoot the issue you are having with your Canon printer.  These are the basic guidelines for printer setup and troubleshooting with Mac OS X.  There are also links to the Canon website if needed.
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
    This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    OS X: Connecting a Wi-Fi printer to your Wi-Fi networkhttp://support.apple.com/kb/ht3500
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    If all else fails, reset the printing system and install the printer again:
    OS X Mavericks: Reset the printing system
    http://support.apple.com/kb/PH14141
    I hope this information helps ....
    - Judy

  • Ipad connection server failed

    I am unable to use Safari  . . get email. . . "unable to connect to server".  Can anyone help?

    Hi missmellie69,
    If you are having issues accessing the Internet from your iPad (Safari, Mail, etc), you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Regards,
    - Brenden

  • My connection to server failed

    What to do when your connection server fails?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

    Dears,
    I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
    I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
    ==========================================================================================
    **** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
    Error:  >Mon Jul 14 11:20:24,636<    RfcException: [null]
        message: Connect from SAP gateway to RFC server failed
    Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
    LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
    ERROR       hostname 'cpe1601' unknown
    TIME        Mon Jul 14 16:20:25 2014
    RELEASE     740
    COMPONENT   NI (network interface)
    VERSION     40
    RC          -2
    MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
    LINE        193
    DETAIL      NiHLGetNodeAddr: hostname cached as unknown
    COUNTER     3
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    ==========================================================================================
    This problem happens when my app executes the line:
    JCoServer myServer = JCoServerFactory.getServer(myServerName);
    My system properties:
    jco.client.lang=EN
    jco.destination.peak_limit=10
    jco.client.client=800
    jco.client.passwd=********
    jco.client.user=********
    jco.client.sysnr=01
    jco.destination.pool_capacity=3
    jco.client.ashost=/H/155.56.49.28/H/cpe1601
    jco.server.connection_count=3
    jco.server.gwhost=/H/155.56.49.28/H/cpe1601
    jco.server.progid=VSPAGUE
    jco.server.gwserv=sapgw01
    jco.server.repository_destination=VSPAGUE
    Using SAP Logon i can connect to server cpe1601 system E16 without problems.
    Please, I really need some help, because my knowledge on SAP platform is minimum.

    Hi Markus,
    Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
    As you could see, the host I'm connecting is from SAP RAC Service.
    Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
    System Connection Parameters
    Description: SAP ECC 6.0
    Application Server: cpe1601
    Instance Number: 01
    System ID: E16
    SAProuter String: /H/155.56.49.28/H/
    Below the connection information I received from SAP RAC SUPPORT for testing purposes:
        E16 System:
        SID: E16
        Client: 800
        System Number: 01
        Server: cpe1601
        Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
        User: ********
       Password: ********
       SAProuter String:
       If you don't plan to use SAPRouter at your end,
       /H/155.56.49.28/H/    

  • Crystal report- Connect from SAP gateway to RFC server failed

    Hi All,
    I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
    Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
    Error :
    Logon failed.
    Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
    Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
    Location SAP-gateway on host ply.log.com/sapgw30
    Error timeout during allocate
    TIME ....
    Release 700
    Component SAP Gateway
    Version 2
    RC 242
    Module gwr3cpic.c
    LINE 1996
    Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
    Can you please help us solving this error.
    Thanks
    Chetan

    Hi Stratos,
    The SAP Version is ECC 6.0.
    The below transports have been imported.
    u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
    u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
    u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
    u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
    u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
    Thanks & Regards,
    Chetan

  • Connect from SAP gateway to RFC server failed

    Good day and a happy new year to you all!
    I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
    >>>>>Start<<<<<<<<<<
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
    LOCATION    SAP-Gateway on host bwsys / sapgw02
    ERROR       timeout during allocate
    TIME        Sat Dec 31 13:16:19 2005
    RELEASE     640
    COMPONENT   SAP-Gateway
    VERSION     2
    RC          242
    MODULE      gwr3cpic.c
    LINE        1785
    DETAIL      no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
    COUNTER     2
    >>>>>>>>>END<<<<<<<<<<<<
    I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
    Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
    What could be wrong or missing in my configuration?
    Regards,
    Joao.

    hi Joao,
    check if oss note 447882 relevant
    you may ask basis for help
    Symptom
    You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
    Other terms
    SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
    Reason and Prerequisites
    The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
    Solution
    Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
    An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
    The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.

  • Error: Connect from SAP gateway to RFC Server failed

    Hi
    I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
    Please kindly help.
    Erro: Connect from SAP gateway to RFC server failed.
    Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
    LOCATION  SAP-Gateway on host hostname / sapgw03
    ERROR       timeout during allocate
    TIME Wed Oct 31 05:31:45 2007
    RELEASE 640
    COMPONENT SAP-Gateway
    VERSION 2
    RC 242
    MODULE gwr3cpic.c
    LINE 1795
    DETAIL no connect of TP sapdp03 from host hostname after 22 sec
    COUNTER 3

    Hi K Patil,
    Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
    to make this work you have to make entry in the SLD of your server
    fort that plesae acess this link.
    Re: JCo connection Error
    Re: wt is SLD.. how to do configure it
    Please Reward Points if Helpfull.
    Regards
    Vinit
    Edited by: Vinit Soni on Dec 19, 2007 7:20 AM

  • Unable to connect to SAP gateway to RFC server failed(hostname unknow)

    Hi All,
    I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
    1.Selecting Import Adaptive RFC Model
    2.Entering Model name,package,default logical system names
    3.Selecting the single server option and giving the details of the SAP R/3 server.
    When I try to connect it gives me the following error :
    -Connect from SAP gateway to RFC server failed.
    Also it mentions :
    <b>"ERROR hostname 'sapR3' unknown "</b>
    Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
    Further I am able to establish a telnet session using the same hostname in command prompt.
    I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
    Regards,
    Kshitij Agrawal

    Hi,
    Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
    1) Open the SAP LogOn.
    2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
    3) Look for the value entered in the field "Application Server" in the properties window.
    Hope this helps.

  • Connection with license server failed sap after upgrade to 8.8

    Hi
    I had just upgraded to 2007b pl14 to 8.8 everything done good but when I login it giving me erroer "connection with license server failed"
    I had restarted the licence server but still it same
    And my licance server option is also disable ?
    plz help me out

    Hi,
    check the below link, it will help you........
    Re: Error in Server Tools Installation
    Rgds,
    Priya

  • RFC_ERROR_COMMUNICATION: Connect to message server failed

    Hi,
    I think this is the most common error that one can face and have seen quite a few threads in the forum. Still, i couldn't resolve my problem.
    I am getting the following error when i tried to connect to SAP using SAP JCO connector with load balancing.
    (102) RFC_ERROR_COMMUNICATION: Connect to message server failed
    Connect_PM  MSHOST=sapserver, R3NAME=D11, GROUP=Group1
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host sapserver, service sapmsD11)
    TIME        Wed Jun 24 16:05:49 2009
    I added the service sapmsD11 in the services file of my client as well as in R/3 server.
    I got the above error when i tried to connect using load balancing. Without load balancing, i was able to connect to R/3 server successfully. Can any one tell how to figure out the message server host name ?
    Can the application server host name and message server host name be same ?
    PS: I am able to ping my R/3 server from my client.
    Thanks,
    Prasad.

    Hi,
    Check that you have configured properly using the below document. And check the message server of R/3 is configured properly in the SLD.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
    Function module to get the message server host name and port in R/3.
    SLDAG_GET_MESSAGE_SERVER_INFO
    See this thread also..
    Re: Jco Destination
    Regards,
    Charan

  • Connect to B1i server failed - HTTP/1.1 404 not found

    Hi All,
    I currently have B1 8.8 PL14 installed and in the process of installing B1i when  I get to Step 3/5: Configure B1i Parameters and select Test Connection I get the error message 'Connect to B1i server failed - HTTP/1.1 404 not found'. I have followed. I have undertaken the installation as per the recorded session by Benno Eberte and regrettably I cannot set a successful connection.
    Can anyone assist?
    Best regards
    Earl

    Hello,
    personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
    Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
    com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
    (-8012) Company version mismatch
    {b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
    In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
    Hope it helps
    Kind Regards

Maybe you are looking for