Connection settings not applied

We have a X60s that has configured several connection profiles. On the wireless broadband it is not applying the network settings correctly. We have set WINS-server, lmhosts and Netbios in the adapter and the profile to the correct settings. But when it connects it removes all this settings from the adapter. Other settings like printers are applyed correctly.
Connection Manager V 5.02 Build 7VC55WW

Try to verify if you have AnyConnect for Mobile enable
Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 100            perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Active/Active perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
Security Contexts                 : 2              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 50             perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 250            perpetual
Total VPN Peers                   : 250            perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
Saludos,
Jose Luis B.
No te olvides de calificar si te sirvio la ayuda.
Please do rate if the given information helps.

Similar Messages

User Group Policy Settings not applied to new user profiles at first logon

Good Afternoon,
We have an issue that occurs to a new user when they first log on to their machines. They log on and a new profile creates from the Default User Profile. We can see that a number of our Group Policy Settings applied as "User Configuration" are
not applying.A log off and back on is required before the policies apply.
Any thoughts to this behaviour please?
Regards
LeeB
Lee Bowman MCITP MCTS

Hi,
How about your problem now? How many system encounter this problem? Is all policy couldn't be applied? Is there any feedback when using gpresult to check policy applied status?
As Group Policy applies after user identity authentication, generally speaking, user logoff and back doesn't helpful with this problem.
When this problem occures, have you checked event log if it identify this problem?
Roger Lu
TechNet Community Support

Ie11 administrative template settings not applied

2008 R2 domain with mostly windows 7 clients running ie8. upcoming project to upgrade them to ie11.
I copied the inetres.admx and inetres.adml files from the PolicyDefinitions folder on a windows 8.1 PC with ie11 and pasted them into the central store.
I created a new GPO that configures "access data across domains" to "disabled" from user configuration/policies/administrative templates/windows components/internet explorer/internet control panel/security page/internet zone.
I logged into four test machines with the same user account.
windows 7 with ie8
windows 7 with ie9
windows 8 with ie10
windows 8.1 with ie11
all four machines show this setting correctly Disabled with my GPO as the winning GPO in RSOP, but *only* the ie8 machine properly shows this setting as Disabled in its Internet Settings. the ie9, ie10, and ie11 machines all have the setting Enabled in their
Internet Settings.
full disclosure: there is an old-school Internet Explorer Maintenance GPO in place that sets this to Enabled. but in theory, that GPO should only affect the ie8 and ie9 machines, right? and yet the ie8 machine is the only one getting the correct
setting from my new administrative template GPO.
is there an easy way in GPMC to tell if i'm actually working with the ie11 version of inetres.admx or not? some setting that's new for this version?

ARRRGHHH!!!
found it. *somebody* set up a Computer Settings GPO applying these same administrative template IE settings to all workstations. I'm going to guess this GPO was set up prior to my arrival at this job in 2005 because I don't remember doing it, and
it would never have occurred to me to put these settings on the machine side--as evidenced by the fact that i've only been looking at the user side in RSOP during this whole thread. the IE settings in this machine GPO also match up with the settings
in the old IEM GPO we've been using, so it appeared as though IEM was configuring everything.
thanks everybody for your time and your help.

AcroRead.mst settings not applied in installation

Hello,
I downloaded Adobe reader 11, dutch (AdbeRdr11000_nl_NL.exe) and extracted it:
AdbeRdr11000_nl_NL.exe -nos_oc:\temp\temp1\files\2 -nos_ne
Then I opened the .MSI file with the Adobe customization wizard and changed some settings (Eula, updates etc).
After that I saved it and AcroRead.mst was created.
Then on the client (logged in as Administrator) I copied all the files in c:\temp and entered:
msiexec.exe /i AcroRead.msi TRANSFORMS="AcroRead.mst" /quiet
Adobe reader gets installed and I can open it but the changes from the customization wizard are NOT applied.
When I start adobe, I get the EULA and the product updates are still configured as automatic.
I tried with other settings and full path names like these:
msiexec.exe /i "c:\temp\adobe\AcroRead.msi" TRANSFORMS="c:\temp\adobe\AcroRead.mst" /quiet
msiexec.exe /i AcroRead.msi TRANSFORMS=AcroRead.mst /quiet
msiexec.exe /i /qn AcroRead.msi TRANSFORMS=AcroRead.mst
msiexec.exe /i "AcroRead.msi" /q TRANSFORMS="AcroRead.mst"
msiexec.exe /i AcroRead.msi /q TRANSFORMS="AcroRead.mst"
But the result is the same, Adobe reader is installed but without the changed settings.
Could someone help with this please ?
I don't know anymore what to do.
thanks.

Copy the examples from http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/cmdline.html#command-line-exa mples so that you don't have to try random cmd lines. For example, quotes are only used around property params.
Enable logging, and if you still have problems, post you cmd line and log.
hth,
Ben

[solved][laptop-mode-tools] hard drive power settings not applied

I've used the laptop-mode-tools now for quite some time. However, recently the power management settings are not applied anymore. Possibly since updating to systemd...
My laptop-mode.conf looks as follows:
CONTROL_HD_POWERMGMT=1
# Power management for HD (hdparm -B values)
BATT_HD_POWERMGMT=254
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
However, even after doing a systemctl restart laptop-mode-tools.service I always get
$ sudo hdparm -B /dev/sda
/dev/sda:
APM_level = 96
Setting it manually works:
$ sudo hdparm -B 254 /dev/sda
/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254
$ sudo hdparm -B /dev/sda
/dev/sda:
APM_level = 254
Of course, the settings are lost upon rebooting in this case.
Any idea where the problem could be?
Last edited by rggjan (2012-10-08 12:25:04)

I apologize if it is bad style to answer to a post marked as [solved] but:
Same problem here!
HDParm-settings are not applied on boot by LMT.
laptop-mode.conf:
# Should laptop mode tools control the hard drive power management settings?
# Set to 0 to disable
CONTROL_HD_POWERMGMT="auto"
# Power management for HD (hdparm -B values)
BATT_HD_POWERMGMT=100
LM_AC_HD_POWERMGMT=200
NOLM_AC_HD_POWERMGMT=254
# hdparm -B /dev/sda
/dev/sda:
APM_level = 96
Any ideas or solutions on this so far?
And why is this post marked as 'solved'?
edit:
1.) manual set hdparm-settings survive reboot but not suspend!
2.) no difference between CONTROL_HD_POWERMGMT="auto" or "1"
3.)
# systemctl status laptop-mode
laptop-mode.service - Laptop Mode Tools
Loaded: loaded (/usr/lib/systemd/system/laptop-mode.service; enabled)
Active: active (exited) since Do 2013-01-24 14:05:20 CET; 8min ago
Process: 664 ExecStart=/usr/sbin/laptop_mode init auto (code=exited, status=0/SUCCESS)
4.) pointed out that this seems to be a bug: https://bugs.archlinux.org/task/33262 as systemd does not restore apm values on wake up.
Last edited by renegat (2013-03-09 11:01:42)

Hide Display Settings not applied in User GPO

Hello,
I am trying to hide the display settings via a GPO so folks can't change the resolution. I set the "Disable the Display Control Panel" setting to enable, but users can still go to the Control Panel and change the display settings. Other parts of
the GPO are applying, like the Ctrl+Alt+Del settings. The GPO has the loopback function set to replace. From my understanding, that should force all user settings in that GPO on everyone who logs into the computer, whether they are in that OU or not.
Some settings apply, just not the Display settings. Is there something else I have to enable to get that working?
Thanks
Jason Watkins MCSE, MCSA, MCDBA, CCNA

Hi Jason,
It's been a while. How is it going? If it still doesn't work out, we can run command
gpresult/h report.html to collect group policy result to check this. Note: to collect computer part group policy settings, we need to run the command with administrative privileges.
In addition, regarding troubleshooting group policy issues, the following thread can be referred to as reference.
[Forum FAQ] Common steps to start troubleshooting Group Policy application issues
https://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

User Connection Settings Not Holding

When I send a connection key to a user of Contribute 4, the
user is getting the following error when trying to implement the
connection key:
Your connection to this site has been disabled. The
administrative settings for this site are missing or have been
reset.
Typically, but not always, when I go back to "Administer" the
site, my admin role has in fact been dumped, but not sure why .
I am using CPS along with Contribute 4.
Any help is appreciated

I've also been having a weird issue. I've just bought this new 27" and the default iMac profile is causing color discrepancies between images on the web - basically the html background and jpg would not match. I tried everything - and finally narrowed it down to Display Profiles. When I randomly click through them and land on lets say Apple RGB, the problem disappears. no more color mismatch. But the iMac profile seems to be corrupt or badly made. I've settled on Generic RGB for now and it seems to hold.

Group Policy IE Maintenance settings not applied locally

Users with cached Group Policies, logging in "workstation only", are not receiving all of the settings specified.
I have followed the steps in TID 3655065, but security tab settings, and homepage are still incorrect.
Windows XP SP2
Zenworks 7
ZDM 7 SP1 IR4 HP4 applied
Workstation policy package GPO:
Computer and Security checked - with persist
User policy package GPO
User checked - with Cache set
When logging in to Novell client on network, the policies work fine.
Logging in workstation only is when the problem exists.
Two errors show -
Error 2 reading Cache User Settings
Error 0x2 refreshing User policy.
Attached is the WMGrpPolUser.log

mdavidso,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

X11 Keyboard Settings Not Applied on Boot

I'm having problems setting my keyboard layout on boot in X11 using Xorg.conf.d. Specifically, I would like to set the default X keyboard to be Programmer Dvorak on boot with the caps:swapescape option on. I have followed the instructions on the Wiki for setting the default X keyboard; however, on boot the caps:swapescape option is applied but otherwise the layout is the standard US QWERTY layout. Setting the keyboard manually using the following command always works:
setxkbmap us -variant "dvp" -option "caps:swapescape
Here is the relevant Xorg.conf.d (10-keyboard.conf) file:
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us"
Option "XkbVariant" "dvp"
Option "XkbOptions" "caps:swapescape"
EndSection
The other thing that is strange is that the output of setxkbmap doesn't change between boot (incorrect keymap) and when the keymap is set manually.
$ setxkbmap -query -print -verbose 10
Setting verbose level to 10
locale is C
Trying to load rules file ./rules/evdev...
Trying to load rules file /usr/share/X11/xkb/rules/evdev...
Success.
Applied rules from evdev:
rules: evdev
model: evdev
layout: us
variant: dvp
options: caps:swapescape
Trying to build keymap using the following components:
keycodes: evdev+aliases(qwerty)
types: complete
compat: complete
symbols: pc+us(dvp)+inet(evdev)+capslock(swapescape)
geometry: pc(pc104)
xkb_keymap {
xkb_keycodes { include "evdev+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compat { include "complete" };
xkb_symbols { include "pc+us(dvp)+inet(evdev)+capslock(swapescape)" };
xkb_geometry { include "pc(pc104)" };
rules: evdev
model: evdev
layout: us
variant: dvp
options: caps:swapescape
Any pointers in the correct direction would be greatly appreciated.

I remember having had the same issue with Gnome which ignores the settings in Xorg.d completely. I would assume the same for Xfce although not for WMFS.
Does this help?
https://bbs.archlinux.org/viewtopic.php?id=154983

ACR settings not applied to jpegs in Explorer?

I use Camera Raw in Bridge to batch edit photos which are jpegs. At the moment, when I make changes and click "done", the changes are applied to the photos in Bridge, but when I view them in Explorer, they are still in the original state.
Before I installed Windows 7, the above procedure would change the photos in Explorer as well as Bridge, is there any way to resolve my problem?
I have xml files disabled and are having changes saved in the ACR database, if that information helps.

The ACR edits are recorded in a text section within the jpeg, do not actually change the image pixels. Therefore, when viewed outside of ACR/Bridge/PS they appear as before the edits, since no other apps use the exif data.
To make this work, you need to "Save" out of ACR, creating new jpegs, which then incorprates the edits into the image pixels.
Richard Southworth

Connection Settings not being saved

Firefox 4 keeps changing my proxy settings so when I start it up it can't access the internet and I have to manually change the settings in Advanced - Network - Settings to No Proxy so I can continue to browse. However this doesn't seem to remember this so I have to keep doing it every time.

See:
* http://kb.mozillazine.org/Preferences_not_saved
This issue can also be caused by an extension that isn't working properly.
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
If it does work in [[Safe mode]] then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
* [[Troubleshooting extensions and themes]]

Windows 8.1 - Security policies not applying

Hi All,
I'm having a bit of an issue with group policy settings not applying on Windows 8.1. Most of the policies are applying as they should but for some
reason certain security settings (Password policy, Account lockout policy, Interactive logon message etc.) are not.
I can see from GPResult that the policy is not filtered out and can confirm that some of the settings from the policy are getting applied!
FYI: The DC is WS2003 and we have not imported the Windows 8.1 ADMX templates... Could that be causing the issue?
Any help you guys might be able offer would be greatly appreciated!

As I know, Security policy like Password policy, Account lockout policy, Interactive logon message should work even the DC is Win Server 2003.
I suggest you check whether these policy are overridden by other GPOs due to the the GPO Priority, you can find detailed information in this link
Group Policy processing and precedence
http://technet.microsoft.com/en-us/library/cc785665(v=ws.10).aspx
Yolanda Zhu
TechNet Community Support

Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?

I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia Blog

Still a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog

ASA-5585-X 8.4(6)5 Idle connections are not being removed according to timeout settings

Hi,
Just a quick question if anybody has run into a bug where the ASAs "timeout" settings are not being applied to idle connections.
It seems that our ASA running the software level 8.4(6)5 is not tearing down connections. This mainly seems to be a problem in one Security Context where there are around 300k UDP connections (related to VOIP phones) that are not being torn down. Idle timers on the connections are going as far as 700 hours. Common to all the UDP connections is also the fact that only 19 Bytes of data has been transmitted on the connection built on the firewall. I am not sure what the purpose of these UDP Connections is as both the source and destination port is a random high port.
I was not able find any Bug ID which description would match the situation I am seeing. I did not see anything in the release notes of 8.4(7) or its interrim release either that would list thing kind of bug.
- Jouni

Hi Jouni,
This caveat seems to be the closest match as 8.4.6 is the affected ASA code.
CSCuh13899
Symptoms:-
Some connection may not removed even after reaching idle timeout.
https://tools.cisco.com/bugsearch/bug/CSCuh13899/?reffering_site=dumpcr
You can upgrade to the next stable ASA code as suggested in the referred document.
HTH
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.

Connection settings not applied

Similar Messages

Maybe you are looking for