Connection snag for new iMac G5 to AV receiver

The user guide says that I can use an optical audio cable w/ mini-plug connector for a iMac G5-based home theater system. I bought a Sony HT-DDW670 5.1 system with an AV Receiver STR-K670P that has a digital optical in
(SA-CD/CD in) that I connected to the optical out. When preferencing the sound setting for the selected device, Mac says that the Digital Out "has no output controls".
The only note in the Sony guide concerning the optical hookup reads: "The sound is not output when you play a SA CD on the SA CD player connected to the SA-CD/CD OPTICAL IN jack on this receiver. Connect to the analog input
jacks (SA-CD/CD IN jacks)." -compatible w/ 32, 44.1, 48, & 96 kHz.
Does anyone have any ideas? The sony online support talked about a stereo mini pin adapter?
iMac G5 PowerMac12,1   Mac OS X (10.4.2)  

Hi there,
Not sure quite waht your problem is!? I have my imac (iShight) G5 connected to my Sherwood amp through a monster audio optical cable with a mini concerter into the mac. As you say, the Mac ships the digital signal straight to the amp.... so you have no system volume controle. However applications can still have an influance on volume.
I have my amp set to a hight volume and my apps to a mid level so I get a nice out put and have room to crank it up.
My amp has a coaxcal and optical input, which is accessed through DVD input, as it assumes that DVD will have digital audio I also have to switch between coaxical and optical on the amp... depending on what cable I'm using.
My DVD used to be coaxixal, may power mac and iMac are optical! The sound is fantastic when you get it to work!
Did that cover your issue in any way? Sorry for rambeling!
Stu.

Similar Messages

  • I have 2 external drives connected to my new iMac. I can see but no one else can, the other can be seen but not written to.

    I have 2 problems, i have 2 external drives connected to my new iMac.
    Both are formatted to FAT 32, one I can see but no one else can and I can write to that drive,. The other can be seen by all but not written to by me or anyone else (This drive was used on PC but is FAT32 (have been back to the PC & told it to read write).
    Permissions are correct on both that I can see. Thats the extent of my knowlege.Please help

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • How much RAM should I install for new iMAC ?

    Hi,
    How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
    *(The 21.5" 3.06GHz Intel Core 2 Duo)
    Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
    Does that sound reasonable?
    Any other recommendations?
    Thanks,
    Wm Heart

    Unless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
    What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
    What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
    HTH
    Regards, Erik.

  • Cable to connect old iMac as second screen for new iMac

    Just bought the new iMac 27" with thunderbolt port.  I understand I can hook up my old iMac (24" Mid 2007) and use it as second monitor.  My challenge is confirming that, and then figuring out which cable to use. 
    The manual says the old iMac has a "Mini-DVI video out port", making it sound like it won't accept input.  True?
    If it will indeed accept input, what cable do I use to connect the two Macs?
    If indeed I can't use the second iMac, I'll purchase a separate monitor.  What should I look for in monitors that will easily attach to the thunderbolt-only new iMac?  I won't be buying the Apple monitor.
    Thanks for any help in advance.
    Bob

    Most new monitors will support standard DVI and VGA connections. Some may support Mini-DVI ports. That's about all I can tell you.
    As for other factors I would look at monitor reviews - as many as you can - for the size and resolutions in which you are interested. There are a lot of products out there. You might try first doing a Google search to learn more about the meanings of the various specs the manufacturers provide so you might wade through the smoke and mirrors in search of meaningful information.

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • Connecting Macbook to new iMac

    I recently bought the 24 inch iMac because my Macbook (purchased April 2006) is slow, unresponsive and has a broken optical drive. I have all of my recent photographs on my Macbook and would like to transfer them to my new iMac using a brand new Firewire 800 9-6 pin cable. My macbook is in working condition and this should work.. however my Macbook in FW mode isn't showing up on my iMac! Help!

    That should be working. Try restarting the iMac with the MacBook connected in target mode. Also, if you run Disk Utility, does the MacBook's drive appear in the sidebar?
    If you have never used that new cable for anything else, it is possible the cable is bad. It is also possible one of the FireWire ports is faulty. Do you have any FireWire 400 device? If so, use that cable to connect it to the iMac's FireWire 800 port, as a test. That will test the iMac's port and the cable. Also try connecting it to the MacBook with a normal cable, to make sure that port is working.
    You can also connect the two Macs using +File Sharing+ over the network. Using an Ethernet cable to directly connect the two Macs will be faster than using wireless (as long as you use a Cat-5e or better cable). Just turn on +File Sharing+ in System Preferences Sharing pane on the MacBook. On the iMac, the MacBook should appear in the sidebar of any Finder window. Select it and click on the +Connect As+ button over to the right. Provide a username and password for an user account (on the MacBook).

  • Use older 2008 iMac as second monitor for new iMac

    Hi all,
    I have one of these older machines that has no real purpose
      http://support.apple.com/kb/sp485
    but would serve me very well as a second monitor for my brand spanking new iMac.
    The specs seem to note that there is a video output - but I'm not seeing anything about video IN.
    Is it possible to use this older iMac as a monitor?

    that looks cool, and there is a free trial.
    I am not keen on using the WiFi to do this - my old iMac has firewire but the new one doesn't.
    Besides using the ludicrously expensive Thunderbolt <-> Firewire 800 convertor
    http://store.apple.com/uk/product/MD464ZM/A/thunderbolt-to-firewire-adapter
    is there any other way to create a wired connection between these devices? I'm not sure if there is such a thing as a USB <-> USB network connection.

  • Connecting on a new iMac G5

    Trying to help a friend get his new iMac G5 on to the net, transferred his old setting from his old mac running 10.2.8 which used a usb cable, connected to a external modem/single router which then goes direct to the phone line. But with the new mac's there is no setting for internal modem and hence we cannot set up his broadband connection to work using the usb port.
    Any help greatly welcome

    I'm not clear about all the details, but I am assuming you are talking about a DSL modem with only a single USB port connection for the computer, not a regular dial-up modem, which is what an internal modem network port setting would be for on Macs that support them.
    If this is the case, I'm afraid your friend will need a DSL modem with an ethernet port or wireless link because Tiger doesn't seem to support high speed USB modem connections. (Apple sells a USB dial-up modem for the new iMacs -- see http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA0 34Z/A -- but I don't think from your "broadband" comment that this is what you want.)

  • ¿I need antivirus for new iMac (2012)?

    It's my first Mac. I want to say if antivirus is necessary in the 2012 new iMac (21'5 ").
    If I need one, tell me about the best antivirus and where I download it, please.
    Thanx!

    This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be sure that it hasn't been modified by anyone other than the developer. His identity is known, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
    Note, however, that there are some caveats concerning Gatekeeper:
    It can be disabled or overridden by the user.
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    For more information about Gatekeeper, see this Apple Support article. That being said, the best defense against malware is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    “Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    Java on the network (not to be confused with JavaScript, to which it's not related) is a weak point in the security of any operating system. If a Java web plugin is not installed, don't install it unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability and poor performance.
    By modifying the system, the software itself may create weaknesses that could be exploited by malware attackers.
    ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. Using it to delete or move email messages can corrupt the Mail database. Such messages must be deleted from within the Mail application. ClamXav is not needed for protection against OS X malware. It's useful only for detecting Windows malware. If you don't need to do that, avoid it. Windows malware can't harm you directly. Just don't pass it on to anyone else.
    It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, like a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use.

  • Best USB CD/DVD 'Superdrive' drive for new iMac

    I've been reading several posts about external (USB?) optical DVD +/- burner/reader drives for the latest desktop iMacs, and several comments have been about various third party ones being superior to the external Apple one that's also available (i.e. that Apple drives often give trouble and are less reliable).
    Having seen the likes of LaCie, Western Digital and Seagate mentioned, I'd appreciate comments/recommendations before I go ahead and buy a new iMac - along with an external Apple? or third party? drive.

    The new iMacs use USB 3.0 speeds, now.
    I would look for an optical drive  that uses the new USB 3 connections.
    This will be a very fast drive.
    If you can't find an optical drive with USB 3.0, then look for a drive that uses FireWire 400/800 and use an Apple FireWire to Thunderbolt adapter to connect the drive.
    FireWire 800 optical drives are pretty fast at up to 85Mbps transfer speeds.
    Here is one such drive.
    http://eshop.macsales.com/item/OWC/MRF82SD24S/
    And the Apple adapter.
    http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r?fnode=51
    Good Luck!

  • Audio interface and external hard drive config for new imac 21"

    Hi. Just got the new imac 21" and I'm considering using it as my main daw with Logic Studio as an upgrade from my old sonar mobo. I usually run up to 40 tracks of recorded audio with fx plugs. I hope to do this at 24 bit 96 instead of 24bit 44 like I did on the old system. I also run the occasional softsynth and sequencer which I don't mind bouncing down to .wav to conserve cpu.
    I really like the specs on the m-audio profire 2626 (I need the 8 mic inputs for recording drums) which needs firewire. But at the same time I'm reading a lot of recommendations about using an fw800 external drive for audio. I've read a little about daisy chaining and I'm wondering if anyone's gotten this type of configuration to work. I'm also open to any other configuration options you have to share that would enable my goal of successfully using this mac with logic.
    thanks in advance for the help,
    dave

    I run three firewire audio interfaces daisy chained together, 2 Presonus FP10's and an Alesis Multimix8.
    This gives me 24 simultaneous inputs. I normally record 24 bit at 88.2 . My iMac has a FW800 and a FW400 port. What I tried to do was run all the interfaces through the 400 and record to a FW800 external hard drive but I it kept dropping out interfaces, even if I used only one interface. I switched firewire cables on the hard drive to a 800/400 so that the hard drive was now operating as a 400 and I did not have any more interface drop outs.
    Even though the iMac has 2 firewire ports, they connect to a single cable to the i/o inside the Mac. If I try recording to an external hard drive, that is 24 tracks going into the Mac, back out to the hard drive, back in to the Mac and then back out to the interfaces and on to the monitor speakers. That is a lot to ask of a firewire connection.
    So, I record to the internal drive and use the external for backing up and saving the projects.

  • CD DRIVE FOR NEW IMAC 2012

    can anyone please advise on the best optical drive for a new imac 2012 model in uk.

    You can use any external optical drive with the new iMacs
    You can use Thunderbolt, FireWire or USB 2.0/3.0 connected drives.
    Here's one source for Mac optical drives
    http://eshop.macsales.com/shop/optical-drives/superdrives/

  • Speakers for new iMac G5

    I'm planning on purchasing the new iMac G5; do I need to purchase external speakers, or does the iMac come with speakers?
    iMac   Mac OS X (10.4.3)  

    Spinnn,
    I am sorry to say that I don't have that sound. I very rarely boot my system though (only for updates etc). I am assuming you checked all of the connections to make sure they are tight? The first time I hooked up the speakers I didn't relize they had shapes on the inputs to make sure they went into the left and right jacks. Stupid me. It is just possible you have a bad output jack on the iMac. You tried other speakers and heard the same thing. Have you tried another electrical outlet? Have you taken the speakers and out them on another computer?
    Happy Holidays!!!
    Tempus

  • Best Practices for new iMac

    I posted a few days ago re failing HDD on mid-2007 iMac. Long story short, took it into Apple store, Genius worked on it for 45 mins before decreeing it in need of new HDD. After considering the expenses of adding memory, new drive, hardware and installation costs, I got a brand new iMac entry level (21.5" screen,
    2.7 GHz Intel Core i5, 8 GB 1600 MHz DDR3 memory, 1TB HDD running Mavericks). Also got a Superdrive. I am not needing to migrate anything from the old iMac.
    I was surprised that a physical disc for the OS was not included. So I am looking for any Best Practices for setting up this iMac, specifically in the area of backup and recovery. Do I need to make a boot DVD? Would that be in addition to making a Time Machine full backup (using external G-drive)? I have searched this community and the Help topics on Apple Support and have not found any "checklist" of recommended actions. I realize the value of everyone's time, so any feedback is very appreciated.

    OS X has not been officially issued on physical media since OS X 10.6 (arguably 10.7 was issued on some USB drives, but this was a non-standard approach for purchasing and installing it).
    To reinstall the OS, your system comes with a recovery partition that can be booted to by holding the Command-R keys immediately after hearing the boot chimes sound. This partition boots to the OS X tools window, where you can select options to restore from backup or reinstall the OS. If you choose the option to reinstall, then the OS installation files will be downloaded from Apple's servers.
    If for some reason your entire hard drive is damaged and even the recovery partition is not accessible, then your system supports the ability to use Internet Recovery, which is the same thing except instead of accessing the recovery boot drive from your hard drive, the system will download it as a disk image (again from Apple's servers) and then boot from that image.
    Both of these options will require you have broadband internet access, as you will ultimately need to download several gigabytes of installation data to proceed with the reinstallation.
    There are some options available for creating your own boot and installation DVD or external hard drive, but for most intents and purposes this is not necessary.
    The only "checklist" option I would recommend for anyone with a new Mac system, is to get a 1TB external drive (or a drive that is at least as big as your internal boot drive) and set it up as a Time Machine backup. This will ensure you have a fully restorable backup of your entire system, which you can access via the recovery partition for restoring if needed, or for migrating data to a fresh OS installation.

  • Windows 7 or 8.1 for new iMac 27 in?

    Just got a new iMac 27 inch about a week ago.  I am new to Mac and still need to have access to Windows for some games and also want to use Office 2013 full MS version.  I have purchased Parallels 9 and am currently testing with Windows 8.1 Preview version.
    Now ready to purchase a full sytem builder Windows version to install and wondering which may be best, Windows 7 or newer Windows 8.1?  Are there that many improvements or new features in 8.1 that i should go with the newest version?  Has anyone else recently installed one of these with Parallels?
    Thanks!

    Just get Office for Mac instead of the Windows version, it doesn't make any sense at all to use the WIndows version. As for your games it doesn't matter what you get, Windoze is Windoze, just be prepared to keep it save by running anitvirus softare and any other tools you need to keep it running OK. Don't worry about the OS X side though, even if the WIndows side becomes diseased it will not affect OS X.

Maybe you are looking for