Connection Specific Error When Processing Device Address Book

Hi,
I am using Desktop Manager 4.5 and am getting a "connection Specific Error" on an 8310 when synchronizing a Device Address Book with the desktop. I get this error when processing record 43 of the 374 record of the address book. Is there a way to edit/remove the record on the device to work around the problem versus losing all the records and starting over. I have already cleared the file on the device and restored from the desk top, but apparently the backup also contains a copy of the corrupt record. This must be a common problem. Can any one refer me to a help file that will walk me through a solution?
Thanks,
Paul

http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
Message Edited by Xandrex on 10-19-2008 07:20 PM
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

CM 7.1 error when access Personal address book /Corp Directory

We upgraded the CM from 6.1 to 7.1 and when I access personal address book and Corp directory I get the Same error message "Error contact your Administrator". I have checked the URl adn they look correct. This is on most phones. Some are working fine. 7975, 7941

This error message indicates that the c:\CiscoWeb\art\art.ini entry still points to the old Lightweight Directory Access Protocol (LDAP) configuration information. In order to overcome this error message, delete the ART database and reinstall the CAR plugin.

Help! Error: Failed to open Address Book Database on Palm Desktop

In advance, thank you, thank you, thank you to the person who saves me from this error! I have no idea what I've done to deserve this!?! So, thank you for helping!!!
Here's the problem:
When I double click on the Palm Desktop icon on my desktop, I get: Error: Failed to open Address Book Database on Palm Desktop
And then, I get: This program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor.
When I click on the details button, it says: PALM caused an invalid page fault in
module MFC42.DLL at 0177:5f404045.
Registers:
EAX=0082fad8 CS=0177 EIP=5f404045 EFLGS=00010202
EBX=00000000 SS=017f ESP=0082fa94 EBP=00855d0c
ECX=5f4d1c58 DS=017f ESI=0082fad8 FS=572f
EDX=00017b84 ES=017f EDI=00000008 GS=0000
Bytes at CS:EIP:
8b 07 3b c8 74 34 83 79 f4 00 7d 0f 83 c1 f4 3b
Stack dump:
00000000 008558c0 004b5d3d 00000008 01befe17 0082fad8 008559cc 008558c0 00855d0c 00000000 00000010 5f4d1c58 00000000 00000000 00000000 00000000
Again, thanks for your help in advance!
Post relates to: Palm Vx

I've seen a lot of people post a message that's basically like the problem I'm having. I'm sending this to everyone who had the same general type of question in hopes that my fix might cure your problem also.
My Palm Desktop (4.1.4) would open correctly the first time after installing, but after doing a hotsync it would crash every other time it was opened (using a Tungsten E). I'm running Windows XP Professional, and it would give an error saying "Windows XP has encountered an error and needs to close", or something like that.
I did the usual. Removed the program and reinstalled, which didn't work. I also went through the tedious process of uninstalling the software, then removing every registry entry by hand that referenced the Palm or Pocketmirror, which also didn't work.
I searched through the support files on palmone.com and found something that gave me an idea. It talked about removing a corrupted file to fix problems with the datebook. I hadn't been getting any errors pointing to a specific problem, but on a hunch I deleted the entire address folder out of the Palm directory. That did the trick!
A corrupted address book in the Palm Desktop software was keeping it from running. The problem was how to fix the corruption, which I eventually found on a menu option in the Palm Desktop software.
Below is the fix that worked for me. Caution! Only do this if you have all of the current info in your Palm, because it will erase what's on your Palm Desktop.
1. Go to your Palm folder on your pc (default install location is c:\palm) and open the folder for your user.
2. Delete the address, datebook, expense, memopad, note pad and todo folders.
3. Open the Palm Desktop program.
4. Do a hotsync.
5. Important! Don't click on anything else in the Palm Desktop after doing the hotsync. If you change to one of the areas that has corrupted data, it will immediately crash.
6. Right after doing the hotsync, click Tools on the top menu in the Palm Desktop, then Options. Click on the Tools tab and then click Check Now to fix the corrupted data.
7. Click OK.
That should hopefully get you running again. Let me know if that worked for you.

Palm Desktop software - Fails to open with msg "Error: Failed to open Address Book database"

In July 2009 I dropped my trusty Visor on a tile floor and it stopped working. So, in the meantime I have been using only the Palm Desktop software.
Just yesterday, when I attempted to launch the Palm Desktop software, it failed with the message “Error: Failed to open Address Book database”. I think this error was caused by a very ungraceful shut-down of my Win XP system yesterday.
I really do need to use the Palm Desktop software for my address list, calendar, and memo. The problem is that the error with the Address Book database seems to be preventing the Palm Desktop software from initializing.
I am using Palm Desktop 4.0.1 on Windows XP SP3. I do NOT have an export file of the Palm address book or other databases. However, I do have five levels of backup history on my external Maxgor backup drive.
Specifically, on my current c drive I have files in the directory:
C:\Program Files\Handspring\WR\address
            address.bak                  5/16/2009   (from last sync before I broke Visor)
            address.dat                   5/24/2011
            Personal.ABA   11/6/2008
            Unfiled.ABA    3/28/2008
On my most recent backup of my system, there are the following files:
                        address.bak                 5/16/2009   (from last sync before I broke Visor)
                        address.dat                  5/12/2011
                        Personal.ABA   11/6/2008
                        Unfiled.ABA      3/28/2008
I have not listed the four older backup versions.
I haven’t tried any corrective measures yet (I don’t want to make matters worse) and am hoping that someone can guide me along the right path.
Is it possible for me to just rename the “current” address.dat file to something like address.SAV and then copy the Address.dat file file with date of 5/12/2011 into the current directory. Will the software then just use the older version of the data, or must I do something else.
I am grateful for any assistance. Thank you very much.
Post relates to: Visor Deluxe
Post relates to: Visor Deluxe

Thanks for the speedy response. However, I read the article for which you provided the link, and I hve also read many other articles that I found via search, but I don't think these will help me. All of these articles seem to assume that (1) you have a handheld to which you can sync and thereby rebuild the database on the PC, or (2) you have a backup that you created via the Palm Desktop export function. Unfortunately, I have neither and so I don't think any of these solutions will work for me.
I did read with great interest an article that stated that recent versions of Palm Desktop have a built-in function that will repair a corrupted Datebook database. Will this also fix a corrupted Address Book database which is my problem?
So, I downloaded and attempted to install the latest version of Palm Desktop. I was careful to read the instructions that stated NOT to uninstall my current version of Palm Desktop, but to just install the latest version on top of my current Palm Desktop. However, when I attempted to do the installation, the installer software said it could not install on top of my current software and that I should first uninstall my current software.
I have some questions now:
(1) If I uninstall my current version of Palm Desktop, will this destroy my Address Book, Datebook, and Memo databases ( I don't care about the ToDo database)? If so, what can I do to preserve those databases?
(2) Is there really a function built in the recent versions of Palm Desktop that will fix a corrupted database? Is this an "automatic" function that will detect and fix a broken database or is this something I will have to invoke?
Thanks for your help.
Gdad

Connection Specific Error - Solution?

I have seen a number of partially resolved posts on this Intellisync [I guess] rooted problem.
Bottom line is having had no problems synching via the Desktop Manager over a long period and on a contacts folder of 2,000 entries, for some unaccountable reason part way through the synching process [on contacts to Outlook in my case] an error message "connection specific error" would appear and the process would cease without updating or part synching. The synch file said that the process had been aborted and cancelled. Any amount of fiddling with Settings made no difference, including deleting all Contacts on Outlook.
The forum information here and on Crackberry seemed inconclusive or needed a wholesale re-build of the device.
I fixed the/my problem as follows:
- Backed up (via Device>>Delete Data)
- Deleted all contacts related data (only) on Device (follow on from step above);
- Restored from backup what i deleted (via Device>>Restore)
Hey presto, now synching with Outlook carries on as before: I presume I had a corrupted single contact on my device.....
Hope this is useful.
PS: I occassionally got other error messages [some including "intelisync"].

go to network connections >> LAN properties >> internet protocol TCP / IP >> properties >> click "Advanced" tab under the DNS ... and check whether u have entered any info for the DNS suffix ..

"Connector Specific Error" when synchronizing with BlackBerry Desktop Software

Hi
i have a connector specific error when I synchronise my contact.
that's my iloptcfg.cfg
[General]
ErrLogMaxSize=500000
ErrLogBackups=0
TraceDetail=0
TraceLog=0
UseNtEventLog=1
UseThreadIDLogFileNames=0
AttendeeDisplayNameOnly=0
[ilwin]
HeapLogging=0
MultiJobTraceLog=1
EngineTracing=799
ILXflags=0
TranslatorLogVerbosity=0
SingleSessionXlateLogs=0
ILTRflags=0
TifLog=0
LoggingFilter=0
ILLOGflags=0
DirectionForRecurringRemove=0
AutoCleanse=1
HistoryFileCompression=0
AllowTwoTierHistoryFiles=0
XlateLogBackups=0
HistoryFileBackups=1
[CAAR Options - Contact]
Add Empty KF Records=0
Perform Email Matching=0
and my PtTrace.log
Sat Jun 05 00:38:41 2010 -- Intellisync Log File --
Sat Jun 05 00:38:41 2010: Error Failed to retrieve field on the device.4238 at RIM:eviceIConnector.cpp line 1415
Sat Jun 05 00:38:41 2010: Error 4.4 at .\sdk_data.cpp line 3846
Sat Jun 05 00:38:41 2010: Error 4238.4087 at .\ciltrans.cpp line 1077
thank yo for your help

Hi and welcome to the forums!
Here is an article on how to resolve the problem.
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I upgraded to Lion on my MacBook Pro. When I close Address Book it automatically quits. How can I get it to stay open on my task bar?

I upgraded to Lion on my MacBook Pro. When I close Address Book it automatically quits. When I close other applications they stay open on my task bar. How can I get Address Book to stay open on my task bar?

Hello charlgilbert,
It sounds like you would like to send a text from your phone number on your portable computer. You can do this by setting iMessage to start new conversations from your phone number in the Messages settings:
On OS X, find out which addresses are enabled:
In Messages, choose Messages > Preferences > Accounts.
From: iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thank you for using Apple Support Communities.
Regards,
Sterling

Error when processing your request

Error when processing your request
What has happened?
The URL http://vinay:8000/sap/bc/webdynpro/sap/zfirst_web was not called due to an error.
Note
     The following error text was processed in the system NSP : Die URL enthält keine vollständige Domainangabe (vinay statt vinay.).
     The error occurred on the application server vinay_NSP_00 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system NSP in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server vinay_NSP_00 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server vinay_NSP_00 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: BCUSER -l: E -s: NSP -i: vinay_NSP_00 -w: 0 -d: 20090622 -t: 074756 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Thomas,
I realize this is a rather old discussion, but I wonder if you know whether running transaction SGEN to generate the loads for either all web dynpros or just a particular transport containing a custom web dynpro would resolve the slow response time and timeout. After a customer message with SAP, this was their suggestion, however our Basis team is skeptical that this will have the desired effect. We noticed the issue when moving from development to QA so we won't know if this is the solution until we try it in production upon go-live.
Cheers,
Amy

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

Error in BPM - Error when processing node '0000000065' ParForEach index

Hi All,
I have an issue .. I have done 1:n mapping successfully and would like to place the Send step in loop instead of a Block .. The reason being I have the count of how many times the Send step should executed for multiline.. I need to receive an Acknowledgement for each send step.. If I dont receive the required number of Acknowledgements then .. I need to revert back some Creations which is a business requirement ..
So .. I have initialized a container operation variable i to '0' .. Then the loop condition is i < count .. Send the multi-container .. Receive the Response .. If dont receive the desired response for any one of the multi-line then I need to do a cancellation process in a loop again .. So .. now I am getting an Exception "Error when processing node '0000000065' (ParForEach index 000000)
Message no. SWP088" in the loop step ..
It is fine if somebody can suggest alternate logic can be applied as well but first preference to use a loop which consumes lesser system resources ..
Kindly look into the Issue
Regards,
Raj
Edited by: raj2112 on Sep 21, 2010 2:34 PM

if you use a loop step, you will send one message per time. ussing block step you have parallel processing ussing ParForEach. now is for X reason the item cannot be created, do a roll back in the target system. the problem here you will do the rollback once the last message reach.
the other posibility is to handle application ack in the sender step. it will let you know it the message was processed success and this ack could be the end condition of your block step. but you cannot use this with loop step.
take a look to this
http://help.sap.com/saphelp_nw04/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm

Error when processing Network

Dear all.
I create a sales order in tcode va01 and input a wbs element E-000009.1 in the field of WBS Element at Account assignment tab of one item detail.When save the sales order,sap pop up a message box with text "Sales order has no CO object".The detail message content was pasted at bottom.When confirm the first message box,sap pop up the second message box with text "Error when processing Network".The detail message content was pasted at bottom.
So I need the experts give me some useful advice and reference to resolve the problem.
Thank you.
Regards
Yoda
Sales order has no CO object
Message no. CO323
Diagnosis
The production order should be settled on the sales order.
The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
Procedure
1. Check which requirements type in entered in the relevant sales order item
Display sales order
2. Check the settings for this requirements type in Customizing
(See Control sales order-related production).
Error when processing Network
Message no. V1380
Diagnosis
A technical error has occurred. On calling up the assembly interface, exception 2 was triggered. The exceptions have the following meanings:
1 = External block
2 = General error
3 = Insufficient data for the interface
4 = Order was not found
5 = Update has been rejected
6 = Final document number for Network is not issued
Procedure
Inform your system administrator.

Dear shashank.
Thanks for you reply.
1.I have checked the sales order and the requ. type was KMNP.In tran OVZH the requ. type KMNP use the ReqCl 202.In tran OVZG I checked the ReqCl 202 and the "Acct.assig.cat." was Q and the Consumption was P.
2.In tran cj20n I checked the wbs element.Its operative indicator was billing elements.
3.In tran mm03 I try to found the field of "req type / strategy".But I could not this field.Could you tell me the "req type / strategy" field was in which view?
Thank you so much.
Regards
Yoda

When I launch address book, multiple windows open

When I launch address book, multiple windows open, and I can't find a way to close them unless I do it one at a time. I must have chosen at some point "open all contacts" or something like that, but am at a loss as to how to prevent this in the future. I've tried command +option+w, to no avail. Ideas? thanks!

Untick this box:
Or use alt/option + Cmd + Q to Quit and DIscard Windows.
Regards.
Colin R.

How to connect a Razr to iCal and Address Book w/ bluetooth

How to connect a Razr to iCal and Address Book w/ bluetooth
Hello. I am going to post this in multiple forums because I searched but couldn't find anything on how to sync my Razr with Tiger's iCal and Address Book so this is the How To.
First, download the software Pacifist which can be found on www.versiontracker.com. After the download, put your Tiger DVD into the drive, open the packages in Pacifist, and do a search for iSync.app. Drag that app into your Applications folder. Go to www.versiontracker.com again, and download the iSync 2.1 update. Run that update, and after the restart, use the bluetooth setup to connect to your phone. After pairing, the bluetooth setup should say that you can sync your contacts and ical list. Go to your Applications folder and find iSync. Using this application, you can now adjust the settings for your iCal and Address Book apps.
Good luck!

Hi,
There's a dedicated forum for Server customers.
Good luck,
S.

Soap response Error when processing XML CF.

Hello,
I have problems with soap response and wondered if you could give some advice.
Every time I send my message via soap I get the following error:
com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error when processing XML CF.
Is it possible that the communication is aborted and my response message mapping is never started?
(Additional info: I tried to create an integration process and am not able to evaluate the response.)
Thanks a lot for your help.
Regards,
Julia

hi,
do you see any more error details in :
http://xiserver:port/MessagingSystem/monitor
did you check logs in visual admin ?
>>>>Is it possible that the communication is aborted and my response message mapping is never started?
yes - if the response is not ok the mapping may not be started
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Mass processing - Error when processing Java programs / VMC out of memory

When running a mass update background process that updates the status of a service order in CRM the job fails due to error 'Error when processing Java programs'. I checked the VMC (SM52) and noticed that there is an error about the VMC running out of memory.
The background program can either be a PPF Action or a Z-ABAP program that performs the update. Both programs are performing a CRM_ORDER_INITIALIZE but it seems that the VMC is not releasing the memory fast enough.
Is there anyway we can force the VMC to release the memory after processing of each individual order?
Thanks!

I got similar issue and it got resolved by useing CRM_ORDER_INITILAIZE. Initalization should happen after every Order processing and see that only one header guid is passed to the the FM. May not be good option ,but just try by putting wait for 5secs after CRM_ORDER_INITILAIZE.

Connection Specific Error When Processing Device Address Book

Similar Messages

Maybe you are looking for