Connection Status: not Responding SCVMM '08
I just installed SCVMM 2008 on a Windows 2008 x64 server with Hyper-V RC0 Enabled. From the console on the server it says "Needs Attention" and when I double click on it, it says
Connection Status: Not Responding
Agent Version: Up to Date
Virtualization Status: Unknown
Virtualization Service Version: Up-to-Date
The firewall is turned on for public network only, and I can connect to manage that box with the hyper-v mmc snap-in for Vista. Why is SCVMM not connecting to it? I rebooted the server after install and still can't get it to work correctly. It sees my VMs on the server but I can't connect to them either.
Thanks,
Chris
I'm having very similar erros, I have read all posted blogs in this thread and followed all instructions with no luck.
This is what Im getting;
Error (2912)
An internal error has occurred trying to contact an agent on the virtualqa1.PFDOMAIN.prairiefyre.com server.
(Unknown error (0xc0000bbf))
Recommended Action
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
Connection Status: Not Responding
Agent Status: Responding
Agent Version: Up-to-Date
Virtualization service status: Running
Virtualization service version: Up-to-Date
I have already applied KB956589 and KB956774.
I did have a USB External Drive connected to the Host, which I have disconnected and have rebooted the host afterwards.
I have installed SCVMM 2008 RTM Server on my Host machine, which is the Hyper-V server.
I have also setup the SCVMM tracing according to the post in this thread. Here is what I see:
00027454 561.69750977 [2788] Ensure that the agent is installed and running. If the error persists, reboot virtualqa1.PFDOMAIN.prairiefyre.com and then try the operation again. ---> System.Runtime.InteropServices.COMException (0x80338000): The WS-Management service cannot process the request. The service cannot find the resource identified by the resource URI and selectors.
00027455 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Get(Object resourceUri, Int32 flags)
00027456 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027457 561.69750977 [2788] --- End of inner exception stack trace ---
00027458 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(COMException ce)
00027459 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
00027460 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027461 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(String url, Type type)
00027462 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Get(String url)
00027463 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.VirWSManRequest`1.Get(String url)
00027464 561.69750977 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.GetSettings(WsmanAPIWrapper wrapper, String instanceID)
00027465 561.69750977 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_ViridianVSSD()
00027466 561.69750977 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_IsSnapshot()
00027467 561.69750977 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.GetTimeOfLAstConfigurationChange(IVMComputerSystem vmComputer)
00027468 561.69750977 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.IsHeavyRefresherNeeded(IVMComputerSystem vmComputer, Nullable`1& modTime)
00027469 561.69750977 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
00027470 561.69750977 [2788] *** Carmine error was: HostAgentWSManObjectNotFound (2915); HR: 0x80338000
00027471 561.69750977 [2788] *** virtualqa1.PFDOMAIN.prairiefyre.com ** D:\Virtual VMC\MCC Server\2003 Server x86.vhd **
00027472 561.69763184 [2788] 0AE4.08A0::11/07-16:26:07.441#26:VmRefresher.cs(727): Caught an exception while refreshing VM 5.5 Server : a7760db6-c5c9-401e-add7-fd1c8c2fecd5. Refresher ID a4d42b32-55e5-49ff-a99d-28342a0d7008
00027473 561.69818115 [2788] 0AE4.08A0::11/07-16:26:07.441#26:VmRefresher.cs(727): Microsoft.Carmine.WSManWrappers.WSManProviderException: The WS-Management service cannot process the request. Object not found on the virtualqa1.PFDOMAIN.prairiefyre.com server.
00027474 561.69818115 [2788] Ensure that the agent is installed and running. If the error persists, reboot virtualqa1.PFDOMAIN.prairiefyre.com and then try the operation again. ---> System.Runtime.InteropServices.COMException (0x80338000): The WS-Management service cannot process the request. The service cannot find the resource identified by the resource URI and selectors.
00027475 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Get(Object resourceUri, Int32 flags)
00027476 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027477 561.69818115 [2788] --- End of inner exception stack trace ---
00027478 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(COMException ce)
00027479 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
00027480 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027481 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(String url, Type type)
00027482 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Get(String url)
00027483 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.VirWSManRequest`1.Get(String url)
00027484 561.69818115 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.GetSettings(WsmanAPIWrapper wrapper, String instanceID)
00027485 561.69818115 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_ViridianVSSD()
00027486 561.69818115 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_IsSnapshot()
00027487 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.GetTimeOfLAstConfigurationChange(IVMComputerSystem vmComputer)
00027488 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.IsHeavyRefresherNeeded(IVMComputerSystem vmComputer, Nullable`1& modTime)
00027489 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
00027490 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunFullRefresher()
00027491 561.69818115 [2788] *** Carmine error was: HostAgentWSManObjectNotFound (2915); HR: 0x80338000
00027492 561.69818115 [2788] *** virtualqa1.PFDOMAIN.prairiefyre.com ** D:\Virtual VMC\MCC Server\2003 Server x86.vhd **
Similar Messages
-
I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!
-
Unable to connect, server not responding
Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist -
I frequently encounter this problem: The application calls long-lasting stored
procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
in the last 120 second(s)."
Questions:
Does increasing thread count help? Default is 15. Is 30 or larger OK?
Can anybody share their experience on this matter?
Detailed log messages in weblogic.log are follows:
####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>
####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
<> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
is now available.>
####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>Andrew Ng wrote:
I frequently encounter this problem: The application calls long-lasting stored
procedure on Sybase which located in another country. Sometimes, WL 6.1 get stuck
just and log the message "XA resource [weblogic.jdbc.jts.Connection] has not responded
in the last 120 second(s)."
Questions:
Does increasing thread count help? Default is 15. Is 30 or larger OK?Increasing thread count isn't going to help. The local server is just waiting for the
remote system to respond.
>
Can anybody share their experience on this matter?
Detailed log messages in weblogic.log are follows:
####<Apr 21, 2003 5:03:48 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).>
####<Apr 21, 2003 5:33:51 PM GMT+08:00> <Info> <JTA> <hkxp0032> <myserver> <Thread-0>
<> <> <110207> <Previously unavailable XA resource [weblogic.jdbc.jts.Connection]
is now available.>
####<Apr 21, 2003 5:33:56 PM GMT+08:00> <Warning> <JTA> <hkxp0032> <myserver>
<Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not
responded in the last 120 second(s).> -
Storage Array (EqualLogic) Status: Not Responding in VMM
We have a customer running SCVMM 2012 SP1, using 2 nodes and the underlying storage is an EqualLogic box.
Worked fine for a while, but a couple of weeks ago their SCVMM started complaining about failed jobs regarding the storage provider. The error message is:
Error (2912)
An internal error has occurred trying to contact the VP-SCVMM01.customer.local server: :a:DestinationUnreachable: :MI RESULT 6:The requested object could not be found..
WinRM: URL: [http://vp-scvmm01.customer.local:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/windows/storage/MSFT_StorageSubSystem?ObjectId={1}\\VP-SCVMM01\root/Microsoft/Windows/Storage/Providers\EQL_StorageSubSystem.ObjectId="6019CB11A5A29937571EA5"]
The handle is invalid (0x80070006)
Recommended Action
Check that WS-Management service is installed and running on server VP-SCVMM01.customer.local. For more information use the command "winrm helpmsg hresult". If VP-SCVMM01.customer.local is a host/library/update server or a PXE server role then ensure that VMM agent is installed and running.
The storage provider in SCVMM is listed as "not responding" as is the Array itself.
Anybody any idea to resolve this?
The closest thing I could find was this thread, somebody mentions the same problem: http://social.technet.microsoft.com/wiki/contents/articles/12038.vmm-2012-sp1-installing-and-configuring-dell-equallogic-ps-series-smp-provider.aspx
Only difference is that we didn't do any upgrade or change. Based on his comment I would like to remove the storage provider and re-add it but I want to make sure that removing it doesn't break anything for the LUN's or the fact they keep being presented
to the hosts.Hello...
What version of Dell EqualLogic Host Integration Tools for Microsoft are you using?
Are you able to manage EqualLogic storage using the SMP Provider from native Windows File and Storage Services in Server Manager?
Basic troubleshooting steps I would recommend are to restart the "EqualLogic SMP Host Service" - and perhaps also restart "Windows Remote Management (WS-Management)" Service.
Has anything recently changed on the Dell EqualLogic group - such as admin account credentials, ip address changes, or the introduction of management interfaces? I would check to ensure that the SMP Provider is properly configured (username, password,
group ip or management ip, etc...). You can do this via the Dell EqualLogic PowerShell Tools or via Dell EqualLogic Auto-Snapshot Manager / Microsoft Edition.
Here is a useful Deployment and Configuration Guide for using the Dell EqualLogic SMP Provider with SCVMM 2012 SP1:
http://en.community.dell.com/techcenter/extras/m/white_papers/20437936.aspx
Keep me posted. Good luck. -
Failure to connect - host not responding
I've been video conferencing regularly with my mother in Fla with no problems. We both have macs with mac accounts. I recently tried to initiate a video conference with my in-laws in N.C. and it wouldnt work. They have a PC with an AIM account. Thier AV icon appears active on my buddy list. I can invite them to a video conference, they see the invite and accept, I can see they've accepted but then the connection fails saying that I (the host) did not respond???? How can that be, since I invited them. By the way, this is the same error I get when I try contacting another friend with a PC and AIM account. Any suggestions? Your assistance would be deeply appreciated.
...by the way, I'm in China but as I said this hasnt effected my ability to video conference with FLA.
Thanks again -alHI Al,
Welcome to the Apple Discussion Pages.
The minimum connection speed needed by iChat to chat to other iChat users is now listed as 100kbps
In iChat 2 this figure was the realistic figure for Video chats.
It was known however that iChat to PC chats did better if the connection speed was at least 150kbps (at both ends)
What do you have ?
http://www.adslguide.org.uk/tools/speedtest.asp Test here.
Ralph -
Get messagewhen syncing iphone no longer connected or not responding
I have tried to transfer ringtones from my computer or memory stick to my iphone. These ringtones were previously on this phone but are gone. Each time I try to sync them again, I get the message "your iphone is no longer connected or is not responding". It is physiaclly connected so I'm losing connection internally.How do I fix this problem?
If you are using a USB hub for the iPhone, don't. If you are using a front port on a desktop or tower computer, don't.
-
N97 - Settings 'Connectivity' do not respond
Hello,
I am having an issue with N97 'connectivity' settings. If I go to connectivity though settings and exit,Settings do not respond until I restart my phone.Does anyone know how can I get rid of this Problem?
after i exit from settings, it still shows 'Settings' application as running but it never responds.
plaese help me.
Regards,
Murrac.Hi, when did this start to happen? After installing anything specific to it - 3rd party apps, themes, settings etc?
-
Ok So I have windows 8.1 with Direct Access Client and it works fine when I am able to check and uncheck proxy settings - which is a bit of a pain and seems unnecessary (I hope). If I take the laptop to a Starbucks I get the error that the proxy server is
not responding so it never redirects for me to "accept" the rules.
If I uncheck my proxy settings it then redirects and connects to their internet wifi and off I go - DA connects and all is well.
I am using a GPO to configure the proxy settings as shown (all options are greyed out for the users)Hi,
Your problem is a classic one when using that kind of proxy settings, unfortunately.
To solve this without the need of user interaction, there are two solutions that will sort this out for you. In your case, if you want to use your corporate connection for internet traffic even over da, I'd opt for alternative 1 or 2 depending on what you are
trying to achieve.
1. WPAD (Web Proxy Auto Discovery protocol http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol) - it actually uses the Automatic browser configuration checkbox on your client and looks for the file wpad.dat on a specific web server that you Pointout
with either dns-record called wpad or DHCP option 252.
2. Auto configuration script (pac script http://en.wikipedia.org/wiki/Proxy_auto-config) - uses the same kind of file as above. The difference is that you get the possiblity, like you want in your scenario to target what users that should get the script.
See this below article for more details on the options you have.
http://technet.microsoft.com/en-us/library/dd361918.aspx
http://techlib.barracuda.com/display/WSFLEXv41/How+to+Configure+Proxy+Settings+Using+Group+Policy+Management
Let us know if you need further assistance!
/Johan
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure -
WRT610N Loses Internet connection, does not respond - with HP Mediasmart HomeServer plugged in
OK - this makes no sense to me - and I consider myself somewhat technical. Hopefully it will make sense to someone else.
I have a new WRT610N v2 (2.00.00.B05) with 3-6 computers (Vista, W7) attached wired and wireless to them at any point in time. I also have an HP Mediasmart EX470 (Windows Homeserver) attached to the network to back them all up. Everything worked great with a WRT54G - but I wanted Gigabit.
Every moring since I got the router, I found it completely unresponsive - all lights on, all systems with IP addresses, etc. - but the router was not communicating with the Internet - and it would not connect newly booted computers, etc.
This happened with my original v1 - so I had it replaced - and I replaced my cable modem as well. I now have an Ambit uc1018.80.
Rather than pushing the reset button today and going through the reconfig process; I tried unplugging network cables to see if it would have an effect. I unplugged the homeserver - and my cable modem "send" light flashed - I was connected (I could browse, etc.) I plugged it back in - and everything went dead - no more send light on the cable modem - and no more internal network traffic either.
I rebooted the homeserver - and everything now works - until, I expect, the next night. The homeserver is a HP EX470 Mediasmart with a memory upgrade (2gb) and a processor upgrade (AMD 1640). It is running Windows Home Server Powerpack 3 (HP Update 1.2.1) with the following addons (PacketVideo PVConnect 4.4.4, Microsoft Homeserver Toolkit 1.1 (6.0.1800.0); and McAfee Total protection 5.0.0.648-patch003). I do not have remote access settings configured.
The homeserver is configured to backup all computers on the network overnight - most of the time they complete successfully - last night one of them failed.
The homeserver has a SiS191 1000/100/10 adapert running at 1000 (DHCP) driver version 2.0.1039.1070 dated 12/20/2006. I am going to look for a newer driver - but it does not make sense that one computer can render a router unresponsive - does it? Any ideas?
Thanks....Here's an update - it looks like it might have somewith to do with DHCP and IPv6....
Testing steps taken - notice that changes in ipconfig/all output is IPv6 related...
1. Router set to factory defaults and re-configured.
2. All systems rebooted and connected to router.
3. All works well for several hours.
4. Cable Modem send light goes out - all network access from client computers ceases.
5. WHS cable disconnected from router - all client network traffic starts working and continue to work for several days without WHS connected.
6. IPconfig of Vista SP2 client computer taken:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Computer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:4b86:9d9a:0:7535:633a:5ca9:b7be(Preferred) ******
Temporary IPv6 Address. . . . . . : 2002:4b86:9d9a:0:740d:b08d:72f5:a267(Preferred) ******
Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:46 PM
Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 251666060
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
DNS Servers . . . . . . . . . . . : 192.168.1.254
24.159.193.40
68.115.71.53
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:10eb:520:3f57:fe1e(Preferred)
Link-local IPv6 Address . . . . . : fe80::10eb:520:3f57:fe1e%11(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
7. WHS server cable plugged into router - send light on cable modem goes out - all connectivity ceases - client ipconfig taken (IPv6 Deprecated?)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Computer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Temporary IPv6 Address. . . . . . : 2002:4b86:9d9a:0:740d:b08d:72f5:a267(Deprecated) ******
IPv6 Address. . . . . . . . . . . : 2002:4b86:9d9a:0:7535:633a:5ca9:b7be(Deprecated) ******
Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:46 PM
Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 251666060
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
DNS Servers . . . . . . . . . . . : 192.168.1.254
24.159.193.40
68.115.71.53
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
8. Wait a few seconds to see if there are changes - client ipconfig taken (no IPv6 address - DHCP lease time extended 1 second?)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Computer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:47 PM
Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 251666060
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
DNS Servers . . . . . . . . . . . : 192.168.1.254
24.159.193.40
68.115.71.53
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
9. WHS server -"hard" rebooted - wait for WHS to come up and stabilize - all connectivity works (including to WHS server) - client ipconfig taken (IPv6 is back - DHCP lease time reduced 1 second?)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Computer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
Physical Address. . . . . . . . . : 00-1E-8C-2B-1B-8D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:4b86:9d9a:0:7535:633a:5ca9:b7be(Preferred) ******
Temporary IPv6 Address. . . . . . : 2002:4b86:9d9a:0:740d:b08d:72f5:a267(Preferred) ******
Link-local IPv6 Address . . . . . : fe80::7535:633a:5ca9:b7be%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.225(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Lease Obtained. . . . . . . . . . : Sunday, December 27, 2009 10:29:48 AM
Lease Expires . . . . . . . . . . : Tuesday, December 29, 2009 10:29:46 PM
Default Gateway . . . . . . . . . : fe80::225:9cff:febe:e726%10
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 251666060
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-10-F7-21-EE-00-1E-8C-2B-1B-8D
DNS Servers . . . . . . . . . . . : 192.168.1.254
24.159.193.40
68.115.71.53
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:60:1612:3f57:fe1e(Preferred)
Link-local IPv6 Address . . . . . : fe80::60:1612:3f57:fe1e%11(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
10. Remote into WHS server - WHS Server ipconfig taken (IPv6 not configured)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Server1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : roc.mn.charter.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : roc.mn.charter.com
Description . . . . . . . . . . . : SiS191 1000/100/10 Ethernet Device
Physical Address. . . . . . . . . : 00-0A-E4-86-A1-E5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.229
Subnet Mask . . . . . . . . . . . : 255.255.255.224
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
24.159.193.40
68.115.71.53
Lease Obtained. . . . . . . . . . : Tuesday, December 29, 2009 7:11:50 AM
Lease Expires . . . . . . . . . . : Wednesday, December 30, 2009 7:11:50 AM
11. Unplug WHS server cable from router - for network stability until this issue is fixed.
I know very little about IPv6 - but this looks like it is IPv6 related - is it? Any ideas as to next steps?
Note:
1. I can't remove IPV6 from all clients - the configuration of one client computer is not under my control.
2. I am thinking of either setting the WHS server to a static IP address - or enabling IPv6 on it - but it would be great to be working from a position of knowledge that blindly trying things...any isight would be appreciated...
Thanks,
Message Edited by userid99999 on 01-01-2010 02:00 PM -
Connected harddrive - not responding?
I have just bought an airport extreme which works great with my broadband connection and macbook pro. very happy!!
BUT - I also have a 80gb (small I know) external hard drive "ICOMM SYNC HD CLASSIC".
this will not work with the airport extreme. It works perfectly well plugged into the usb of my MBP but is not even shown as connected when I plug it into the aiport extreme. It is like it isn't even plugged in??!!
I have gone through the apple support by telephone and they ran out of ideas and suggested I take it into a store with the harddrive and get it tested....
The store is over fifty miles from my house and I don't want to travel that far if it is not necessary - SO HAS ANYONE GOT ANY IDEAS ON HOW TO GET IT WORKING OR HAS ANYONE ELSE HAD THE SAME PROBLEM??I have the same problem. The iMac can see the hard drive if it is plugged into the USB port of the computer. While using the Airport utility program I can see the drive if it is plugged into the back of the Airport. But my computers cannot see the drive on the network.
-
XA resource not responding in production !
Hey guys ...I have seen posts for this kind of errors ..but didn't find any reason
for what is causing this problem...basically once this error starts happening the
server becomes unresponsive...any help is appreciated as this is happening in production
and the only way out seems to be restarting the server during business hrs which
is not a good idea...
####<May 20, 2002 2:58:35 PM EDT> <Warning> <JTA> <nynwspap1> <Cluster1> <Thread-0>
<> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not responded in the
last 120 second(s).>
####<May 20, 2002 3:28:44 PM EDT> <Warning> <JTA> <nynwspap1> <Cluster1> <Thread-0>
<> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not responded in the
last 120 second(s).>
####<May 20, 2002 3:39:18 PM EDT> <Debug> <BofaApp> <nynwspap1> <Cluster1> <ExecuteThread:
'8' for queue: 'default'> <> <> <000000> <getLogicalData for:CoreInfo>
####<May 20, 2002 3:39:18 PM EDT> <Error> <BofaApp> <nynwspap1> <Cluster1> <ExecuteThread:
'11' for queue: 'default'> <marcme> <> <000000> <
AcctApproveHelper::approve() Remote call was not successful
java.rmi.RemoteException: EJB Exception:; nested exception is:
java.rmi.RemoteException: Message was not sent because transaction is not
active. transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=
10531:c004c7fd25fa6b58,Status=Rolled back. [Reason = weblogic.transaction.internal.TimedOutException:
Transaction timed out after 99seconds
tx = transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Active,numRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread: '11' for queue:
'default',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.
Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc
=t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=3213,seconds left=22,activeThread=Thread[ExecuteThread: '11' for queue: 'defau
lt',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB AccountBeanImpl.approveAccount()], weblogic.jdbc=t3://10.215.7.169:7003}))
java.rmi.RemoteException: Message was not sent because transaction is not active.
transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c0
04c7fd25fa6b58,Status=Rolled back. [Reason = weblogic.transaction.internal.TimedOutException:
Transaction timed out after 99seconds
tx = transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Active,numRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread: '11' for queue:
'default',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.
Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc
=t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=3213,seconds left=22,activeThread=Thread[ExecuteThread: '11' for queue: 'defau
lt',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB AccountBeanImpl.approveAccount()], weblogic.jdbc=t3://10.215.7.169:7003}))
at weblogic.transaction.internal.TransactionManagerImpl.sendRequest(TransactionManagerImpl.java:402)
at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:78)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at com.symphoni.bofa.business.entity.qualification.QualificationBeanEOImpl_WLStub.setQualificationData(QualificationBeanEOImpl_WLStub.java:576)
at com.symphoni.bofa.business.session.accountmgr.table.QualificationTable.updateDatabase(QualificationTable.java:79)
at com.symphoni.bofa.business.session.accountmgr.table.TableOneToOne.save(TableOneToOne.java:54)
at com.symphoni.bofa.business.session.accountmgr.helper.BaseQualificationHelper.commit(BaseQualificationHelper.java:95)
at com.symphoni.bofa.business.session.accountmgr.SubmitHelper.saveToDatabase(SubmitHelper.java:96)
at com.symphoni.bofa.business.session.accountmgr.SubmitHelper.commit(SubmitHelper.java:75)
at com.symphoni.bofa.business.session.accountmgr.BaseAccount.submitAccount(BaseAccount.java:287)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.submitAccount(AccountBeanImpl.java:150)
at com.symphoni.bofa.business.session.accountmgr.BaseAccount.approveAccount(BaseAccount.java:618)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.approveAccount(AccountBeanImpl.java:950)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanEOImpl.approveAccount(AccountBeanEOImpl.java:1564)
at com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.approve(AcctApproveHelper.java:167)
at com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.init(AcctApproveHelper.java:80)
at com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.processInit(BaseAcctController.java:564)
at com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.doPost(BaseAcctController.java:359)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:157)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:111)
at jsp_servlet._view._pages._account._distributor._index._jspService(_index.java:327)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1622)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Hey guys ...I have seen posts for this kind of errors ..but didn't find any reason
for what is causing this problem...basically once this error starts happening the
server becomes unresponsive...any help is appreciated as this is happening in production
and the only way out seems to be restarting the server during business hrs which
is not a good idea...
####<May 20, 2002 2:58:35 PM EDT> <Warning> <JTA> <nynwspap1> <Cluster1> <Thread-0>
<> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not responded in the
last 120 second(s).>
####<May 20, 2002 3:28:44 PM EDT> <Warning> <JTA> <nynwspap1> <Cluster1> <Thread-0>
<> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not responded in the
last 120 second(s).>
####<May 20, 2002 3:39:18 PM EDT> <Debug> <BofaApp> <nynwspap1> <Cluster1> <ExecuteThread:
'8' for queue: 'default'> <> <> <000000> <getLogicalData for:CoreInfo>
####<May 20, 2002 3:39:18 PM EDT> <Error> <BofaApp> <nynwspap1> <Cluster1> <ExecuteThread:
'11' for queue: 'default'> <marcme> <> <000000> <
AcctApproveHelper::approve() Remote call was not successful
java.rmi.RemoteException: EJB Exception:; nested exception is:
java.rmi.RemoteException: Message was not sent because transaction is not
active. transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=
10531:c004c7fd25fa6b58,Status=Rolled back. [Reason = weblogic.transaction.internal.TimedOutException:
Transaction timed out after 99seconds
tx = transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Active,numRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread: '11' for queue:
'default',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.
Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc
=t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=3213,seconds left=22,activeThread=Thread[ExecuteThread: '11' for queue: 'defau
lt',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB AccountBeanImpl.approveAccount()], weblogic.jdbc=t3://10.215.7.169:7003}))
java.rmi.RemoteException: Message was not sent because transaction is not active.
transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c0
04c7fd25fa6b58,Status=Rolled back. [Reason = weblogic.transaction.internal.TimedOutException:
Transaction timed out after 99seconds
tx = transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Active,numRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread: '11' for queue:
'default',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.
Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc
=t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=3213,seconds left=22,activeThread=Thread[ExecuteThread: '11' for queue: 'defau
lt',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB AccountBeanImpl.approveAccount()], weblogic.jdbc=t3://10.215.7.169:7003}))
at weblogic.transaction.internal.TransactionManagerImpl.sendRequest(TransactionManagerImpl.java:402)
at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:78)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at com.symphoni.bofa.business.entity.qualification.QualificationBeanEOImpl_WLStub.setQualificationData(QualificationBeanEOImpl_WLStub.java:576)
at com.symphoni.bofa.business.session.accountmgr.table.QualificationTable.updateDatabase(QualificationTable.java:79)
at com.symphoni.bofa.business.session.accountmgr.table.TableOneToOne.save(TableOneToOne.java:54)
at com.symphoni.bofa.business.session.accountmgr.helper.BaseQualificationHelper.commit(BaseQualificationHelper.java:95)
at com.symphoni.bofa.business.session.accountmgr.SubmitHelper.saveToDatabase(SubmitHelper.java:96)
at com.symphoni.bofa.business.session.accountmgr.SubmitHelper.commit(SubmitHelper.java:75)
at com.symphoni.bofa.business.session.accountmgr.BaseAccount.submitAccount(BaseAccount.java:287)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.submitAccount(AccountBeanImpl.java:150)
at com.symphoni.bofa.business.session.accountmgr.BaseAccount.approveAccount(BaseAccount.java:618)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.approveAccount(AccountBeanImpl.java:950)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanEOImpl.approveAccount(AccountBeanEOImpl.java:1564)
at com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.approve(AcctApproveHelper.java:167)
at com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.init(AcctApproveHelper.java:80)
at com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.processInit(BaseAcctController.java:564)
at com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.doPost(BaseAcctController.java:359)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:157)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:111)
at jsp_servlet._view._pages._account._distributor._index._jspService(_index.java:327)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1622)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
-
XA RESOURCE NOT RESPONDING IN PROD
Hey guys ...I have seen posts for this kind of errors ..but didn't find any reason
for what is causing this problem...basically once this error starts happening the
server becomes unresponsive...any help is appreciated as this is happening in production
and the only way out seems to be restarting the server during business hrs which
is not a good idea...
####<May 20, 2002 2:58:35 PM EDT> <Warning> <JTA> <nynwspap1> <Cluster1> <Thread-0>
<> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has not responded in the
last 120 second(s).> ####<May 20, 2002 3:28:44 PM EDT> <Warning> <JTA> <nynwspap1>
<Cluster1> <Thread-0> <> <> <110030> <XA resource [weblogic.jdbc.jts.Connection]
has not responded in the
last 120 second(s).> ####<May 20, 2002 3:39:18 PM EDT> <Debug> <BofaApp> <nynwspap1>
<Cluster1> <ExecuteThread: '8' for queue: 'default'> <> <> <000000> <getLogicalData
for:CoreInfo> ####<May 20, 2002 3:39:18 PM EDT> <Error> <BofaApp> <nynwspap1> <Cluster1>
<ExecuteThread: '11' for queue: 'default'> <marcme> <> <000000> < AcctApproveHelper::approve()
Remote call was not successful java.rmi.RemoteException: EJB Exception:; nested exception
is: java.rmi.RemoteException: Message was not sent because transaction is not active.
transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid= 10531:c004c7fd25fa6b58,Status=Rolled
back. [Reason = weblogic.transaction.internal.TimedOutException: Transaction timed
out after 99seconds tx = transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Active,numRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread: '11' for queue:
'default',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.
Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc =t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=3213,seconds left=22,activeThread=Thread[ExecuteThread: '11' for queue:
'defau lt',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB AccountBeanImpl.approveAccount()], weblogic.jdbc=t3://10.215.7.169:7003}))
java.rmi.RemoteException: Message was not sent because transaction is not active.
transaction=(IdHash=3308339,Name = [EJB AccountBeanImpl.approveAccount()],Xid=10531:c0
04c7fd25fa6b58,Status=Rolled back. [Reason = weblogic.transaction.internal.TimedOutException:
Transaction timed out after 99seconds tx = transaction=(IdHash=3308339,Name = [EJB
AccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Active,numRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread: '11' for queue:
'default',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.
Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc =t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=3213,seconds left=22,activeThread=Thread[ExecuteThread: '11' for queue:
'defau lt',5,Thread Group for Queue: 'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB AccountBeanImpl.approveAccount()], weblogic.jdbc=t3://10.215.7.169:7003}))
at weblogic.transaction.internal.TransactionManagerImpl.sendRequest(TransactionManagerImpl.java:402)
at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:78) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at com.symphoni.bofa.business.entity.qualification.QualificationBeanEOImpl_WLStub.setQualificationData(QualificationBeanEOImpl_WLStub.java:576)
at com.symphoni.bofa.business.session.accountmgr.table.QualificationTable.updateDatabase(QualificationTable.java:79)
at com.symphoni.bofa.business.session.accountmgr.table.TableOneToOne.save(TableOneToOne.java:54)
at com.symphoni.bofa.business.session.accountmgr.helper.BaseQualificationHelper.commit(BaseQualificationHelper.java:95)
at com.symphoni.bofa.business.session.accountmgr.SubmitHelper.saveToDatabase(SubmitHelper.java:96)
at com.symphoni.bofa.business.session.accountmgr.SubmitHelper.commit(SubmitHelper.java:75)
at com.symphoni.bofa.business.session.accountmgr.BaseAccount.submitAccount(BaseAccount.java:287)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.submitAccount(AccountBeanImpl.java:150)
at com.symphoni.bofa.business.session.accountmgr.BaseAccount.approveAccount(BaseAccount.java:618)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.approveAccount(AccountBeanImpl.java:950)
at com.symphoni.bofa.business.session.accountmgr.AccountBeanEOImpl.approveAccount(AccountBeanEOImpl.java:1564)
at com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.approve(AcctApproveHelper.java:167)
at com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.init(AcctApproveHelper.java:80)
at com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.processInit(BaseAcctController.java:564)
at com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.doPost(BaseAcctController.java:359)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:157)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:111) at jsp_servlet._view._pages._account._distributor._index._jspService(_index.java:327)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1622)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)Hi Krish
From your note, I am guessing you are using the Oracle thin driver with
WebLogic Server 6.0 (SP?). Have you tried updating the oracle thin driver to
the the latest version from oracle. They made quite a few fixes to the
driver. Older version 8.1.6 driver had problems and could take the server
into a hang. If you are not already using 8.1.7 or 9.0.1 driver I recommend
you to move to that version.
When the server goes unresponsive thread dumps will help us figure out what
makes the server unresponsive. This is a general thing to debug the issue.
Even if its intermittent, the next time it happens I recommend you make sure
you have at least 2 Full thread dumps.
Regards
sree
"Krishnan Venkataraman" <[email protected]> wrote in message
news:[email protected]...
>
>
Sree ..I was warned that this wud be the typical reply from bea supportusually for
this problem...
firstly...this problem happens intermittently...in that case I do not seehow I can
take these thread dumps..since this beviour is unexpected...
I use classes12.zip and the patch CR047274_60.jar which weblogic providesfor the
"broken pipe" bug..
When this event occured..I checked the pool size and it was far less thanthe max
size ...and this error seems to be rendering the server unusable but for arestart...!
>
Thanx,
Krish
"Sree Bodapati" <[email protected]> wrote:
Also what driver are you using to connect to the database? (to create
connection pools)
sree
"KRISHNAN VENKATARAMAN" <[email protected]> wrote in message
news:[email protected]...
Hey guys ...I have seen posts for this kind of errors ..but didn't findany reason
for what is causing this problem...basically once this error startshappening the
server becomes unresponsive...any help is appreciated as this is
happening
in production
and the only way out seems to be restarting the server during businesshrs
which
is not a good idea...
####<May 20, 2002 2:58:35 PM EDT> <Warning> <JTA> <nynwspap1>
<Cluster1>
<Thread-0>
<> <> <110030> <XA resource [weblogic.jdbc.jts.Connection] has notresponded in the
last 120 second(s).> ####<May 20, 2002 3:28:44 PM EDT> <Warning> <JTA><nynwspap1>
<Cluster1> <Thread-0> <> <> <110030> <XA resource[weblogic.jdbc.jts.Connection]
has not responded in the
last 120 second(s).> ####<May 20, 2002 3:39:18 PM EDT> <Debug>
<BofaApp>
<nynwspap1>
<Cluster1> <ExecuteThread: '8' for queue: 'default'> <> <> <000000><getLogicalData
for:CoreInfo> ####<May 20, 2002 3:39:18 PM EDT> <Error> <BofaApp><nynwspap1> <Cluster1>
<ExecuteThread: '11' for queue: 'default'> <marcme> <> <000000> <AcctApproveHelper::approve()
Remote call was not successful java.rmi.RemoteException: EJB
Exception:;
nested exception
is: java.rmi.RemoteException: Message was not sent because transactionis
not active.
transaction=(IdHash=3308339,Name = [EJBAccountBeanImpl.approveAccount()],Xid=10531:c004c7fd25fa6b58,Status=Rolled
back. [Reason = weblogic.transaction.internal.TimedOutException:
Transaction timed> >> out after 99seconds tx = transaction=(IdHash=3308339,Name = [EJB>>AccountBeanImpl.approveAccount(),Xid=10531:c004c7fd25fa6b58,Status=Active,n
umRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread:
'11'
for queue:
'default',5,Thread Group for Queue:'default'],ServerResourceInfo[weblogic.jdbc.jts.
>Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),
properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc
=t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,second
s
since begin=3213,seconds left=22,activeThread=Thread[ExecuteThread:
'11'
for queue:
'defau lt',5,Thread Group for Queue:
'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledbac
k,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()],
weblogic.jdbc=t3://10.215.7.169:7003}))
java.rmi.RemoteException: Message was not sent because transaction isnot
active.
transaction=(IdHash=3308339,Name = [EJBAccountBeanImpl.approveAccount()],Xid=10531:c0
04c7fd25fa6b58,Status=Rolled back. [Reason =
weblogic.transaction.internal.TimedOutException:> >> Transaction timed out after 99seconds tx => >transaction=(IdHash=3308339,Name = [EJB> >>>>AccountBeanImpl.approveAccount(),Xid=10531:c004c7fd25fa6b58,Status=Active,
n
umRepliesOwedMe=1,numRepliesOwedOthers=1,second
s since begin=99,seconds left=60,activeThread=Thread[ExecuteThread:
'11'
for queue:
'default',5,Thread Group for Queue:'default'],ServerResourceInfo[weblogic.jdbc.jts.
>Connection]=(state=suspended,assigned=none),SCInfo[Cluster1]=(state=active),
properties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()], weblogic.jdbc
=t3://10.215.7.169:7003}))],numRepliesOwedMe=0,numRepliesOwedOthers=0,second
s
since begin=3213,seconds left=22,activeThread=Thread[ExecuteThread:
'11'
for queue:
'defau lt',5,Thread Group for Queue:
'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledbac
k,assigned=Cluster1),SCInfo[Cluster1]=(state=rolledback),prope
rties=({weblogic.transaction.name=[EJB
AccountBeanImpl.approveAccount()],
weblogic.jdbc=t3://10.215.7.169:7003}))
at
weblogic.transaction.internal.TransactionManagerImpl.sendRequest(Transaction
ManagerImpl.java:402)
atweblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:78)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at
com.symphoni.bofa.business.entity.qualification.QualificationBeanEOImpl_WLSt
ub.setQualificationData(QualificationBeanEOImpl_WLStub.java:576)
at
com.symphoni.bofa.business.session.accountmgr.table.QualificationTable.updat
eDatabase(QualificationTable.java:79)
at
com.symphoni.bofa.business.session.accountmgr.table.TableOneToOne.save(Table
OneToOne.java:54)
at
com.symphoni.bofa.business.session.accountmgr.helper.BaseQualificationHelper
..commit(BaseQualificationHelper.java:95)
at
com.symphoni.bofa.business.session.accountmgr.SubmitHelper.saveToDatabase(Su
bmitHelper.java:96)
at
com.symphoni.bofa.business.session.accountmgr.SubmitHelper.commit(SubmitHelp
er.java:75)
at
com.symphoni.bofa.business.session.accountmgr.BaseAccount.submitAccount(Base
Account.java:287)
at
com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.submitAccount(
AccountBeanImpl.java:150)
at
com.symphoni.bofa.business.session.accountmgr.BaseAccount.approveAccount(Bas
eAccount.java:618)
at
com.symphoni.bofa.business.session.accountmgr.AccountBeanImpl.approveAccount
(AccountBeanImpl.java:950)
at
com.symphoni.bofa.business.session.accountmgr.AccountBeanEOImpl.approveAccou
nt(AccountBeanEOImpl.java:1564)
at
com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.approve(Acc
tApproveHelper.java:167)
at
com.symphoni.bofa.presentation.accountmgr.util.AcctApproveHelper.init(AcctAp
proveHelper.java:80)
at
com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.process
Init(BaseAcctController.java:564)
at
com.symphoni.bofa.presentation.accountmgr.servlet.BaseAcctController.doPost(
BaseAcctController.java:359)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) atjavax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:213)
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:157)
at
weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:111)
atjsp_servlet._view._pages._account._distributor._index._jspService(_index.jav
a:327)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:213)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:1265)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:1622)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) atweblogic.kernel.ExecuteThread.run(ExecuteThread.java:120) -
Hyperion financial reporting studio not responding
hi all,
I have Hyperion financial reporting studio "client" (Hyperion 9.3.1) installed in my local machine - windows 32 bit machine.
The machine configuration is:
P4 3.0 GHz and 1 GB RAM.
When I launch Hyperion financial reporting studio with username , password and report server information the System performance parameter ( As found in task manager) goes following change:
CPU usage:fluctuates between 45 - 100% which was initially 1%
PF usage:jumps to 1.32GB which was initially 362MB
Physical memory available : drops down from 762188(K) to 1728(K)
application status: Not responding
AND ULTIMATELY THE WINDOW OF FINANCIAL REPORTING STUDIO VANISHES .There is no error log created ??
I cannot proceed further. Please help me out...
Thanks in advancePlease post these type of queries to Hyperion BI Workspace & Reporting module
-
IChat Mac-to-Mac xyz did not respond
Hello, I have a very strange case: when trying to connect to X we do not get iChat working, this is what happens:
- Select the person from the buddy list
- Connecting
- did not respond message
I have tested this also with another Mac user Y and iChat works fine. When Y connects to X it works fine too. However when Y connects to me and tries to add X then we cannot get him in the same chat "did not respond".
How is this possible and what can we do to solve it?
Bdw: skype is working fine!
Many thanks!Hi MichaelM,
As well as testing with known good user/accounts as Defcom has offered also look at this page/section
Please note the bottom line.
11:02 PM Sunday; March 5, 2006
Maybe you are looking for
-
Hi, My Mac Mail is driving me bonkers! For the last week or so, it's been extremely erratic on my Macbook Pro (seems fine on my phone). First it dumped all of my sent messages- then it gradually loaded them all up again, over the course of a couple o
-
Can anyone give me some idea regarding Workflow task and what is the use of this. Thanks
-
Photo Stream photo syncing on iPad?
I just bought a new iPad, and the Photos app only shows a fraction of my Photo Stream photos. (My Mac's iPhoto app and my iPhone both show more than 700; the iPad shows just a couple dozen of the most recent.) Any idea what's going on? I'd appreciate
-
Can I replace my iPhone4 and buy iPhone5s in buy back?
I want to replace my iPhone4 to buy a new iPhone5s...
-
In child pages made from a template in DW MX 2004 the titles seem to be locked. The code at the top of the template looks like this: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <