Connection String  connect 10XE from Power Builder 7.0

Hai All
I want to know how can I make connection String to connect Oracle 10 XE from Power Builder 7.0. Is is possible to connect from PB 7.0 or I have to Migrate to PB10 ?
Thanks In Advance
Regards
Shweta

Hi
Yes,you can integrate multiple sap systems with PI.
1) Create a automatic Technical system for 4.6C system(R/3) using RZ70 in 4.6c...then create a business system for this.
2) Create a automatic tecnical system in sld for SAP ECC 6.0(R/3) system using rz70 in ecc and create a business system for this.
3) Also create TS & BS if any non sap applications are involved.
use this Business systems as per the interface requirements for sender & receiver
Regards
Abhijit

Similar Messages

  • How to call RFC from Power Builder

    Hi,
    I am using Power Builder Tools and I want to know how can i call RFC from Power Builder
    Thanks for ur reply

    Hi,
    Although I have not worked with Powerbuilder, I am sure if you have a certain level of proficiency with it, you will be able to code your logic that will call your wrappers written in VB/C/.NET etc. Check out the wonderful weblog by Thomas Jung on integrating ActiveX controls with ABAP Control Framework at https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/995. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    Do get back if you have further queries.
    Regards
    Message was edited by: Shehryar Khan

  • Integration from Power Builder Application to ERP??

    Hey~~~
    I want to integrate between power builder application and erp system.
    A power builder application is a sender and erp is a receiver.
    It should be real-time and sync. scenario.
    What adapter should I use for power builder app. in this case?
    If someone experienced power builder as third-party, please give me a hint.
    Thank you.

    Hey
    >>Do you means that we call web services in power builder app. ?
    generate the WSDL for the powerbuilder application(powerbuilder guys should be able to provide you with it ) and then import this WSDL in IR,then import RFC(as urs is sync scenario)into IR as well,do the request and response mapping.
    configure sender SOAP adapter and receiver RFC adapter(also do the pipeline steps ) and there you go,the scenario is complete:)
    thanx
    Ahmad

  • Not able to connect to database from Report builder

    hello,
    I installed oracle 9i in my machine and is accessable from SQLPLUS . In the same drive i installed Report builder, i am getting the below error when i tried to connect DB from Report builder.
    REP-0501: Connecting to the database not specified.
    ORA-12521: TNS: address symbolic have not been resolved
    I create 2 accounts "system/ensa2010" and "sys/mrs2010" and a DB "master"
    to connect I use this informations
    User: system
    Password: ensa2010
    Database: master
    the contents of my tnsnames.ora file is:
    # TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    MASTER =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = toto-86fb8e5b52)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = master)
    INST1_HTTP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = toto-86fb8e5b52)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = SHARED)
    (SERVICE_NAME = MODOSE)
    (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    Please, if you have any ideas help and thanks.

    resolved
    I just add the master entry in the c:\Report\NET80\ADMIN\tnsnames.ora, and it works.
    but I can't connect with the system or sys accounts, it work just with scott/tiger.

  • Not able to connect to database from Form builder

    Hi ,
    I installed oracle 10 g in my machine and is accessable from SQLPLUS & TOAD.
    In the same drive i installed Form builder, i am getting the below error when i tried to connect DB from form builder.
    ORA- 12154 : TNS : could not resolve service name.
    Kindly do the needfull.

    i am getting the below error when i tried to connect DB from form builder.
    ORA- 12154 : TNS : could not resolve service name.Please post the exact syntax you use to connect.

  • Connectiing Java Web Service to Power Builder application

    Hello
    I have to develop an application where i must connect a Power Builder application to java web service.Can any one help me in this matter...My client wants from Power Builder application i should call a .exe..means the parameter from the power builder should go to atfirst to that java exe and from that exe it should call the web application in java...
    Can any one help me in finding the solution?

    hi,
    Java web service builder for java application- Java web service : http://java.sun.com/webservices/docs/1.6/tutorial/doc/
    - builder : I guess you will need a custom class loader => see this
    hope it helps

  • Oracle 9i with Power Builder 7.0.2

    Hi everybody!!!
    we are trying to pull out a report using the Stored Procedures in Oracle 9i thro' ODBC in Power Builder.
    The Procedure has two arguments, Viz.
    1. A Number Argument as "IN" Parameter &
    2. a PACKEGED REF CURSOR as an "IN OUT" Parameter.
    When we try to build a dw on this SP thro' ODBC, it refuses to build. The Database Driver Doesn't give any error message.
    IF we build the procedure without the IN Number Parameter, IT does its job successfully by returning the result set.
    We are having following Configuration:
    1. OS: Win NT 4.0 SP 6.
    2. Front End: Power Builder 7.0.2 Build 8031.
    3. Back End: Oracle 9i build 9.2.0.1.0
    4. ODBC: Oracle 9i build 9.02.00.00
    5. ODBC File: SQORA32.DLL
    We even tried by using the latest driver without any success.
    Seeking any help reg.g this.
    Thanks in Advance.
    Amol.

    Forgive my ignorance, but what does dw in "build a dw on this" stand for? I'm only coming up with Data Warehouse, but I'm pretty sure that's not what you mean.
    Can you clarify "refuses to build"? Do you get an error message from Power Builder?
    For sanity, I'd try the same thing on a Windows 2000 machine. That would tend to be a more heavily tested environment (though NT 4 is supported).
    Have you run an ODBC trace to determine if the driver is reporting errors that Power Builder isn't showing you?
    My guess would be that this is a problem with Power Builder. I'd contact those folks to see whether they have any known issues/ workarounds.
    Justin

  • Power Builder in Oracle 9i

    Guys,
    We have Power Builder 7.0.2 which runs against 7.3.4 dB. It works fine for the past several years. Now we are planning to move the database to 9.2. Will there be any problems from power builder? Your help is appreciated.
    Regards
    Ramesh

    Forgive my ignorance, but what does dw in "build a dw on this" stand for? I'm only coming up with Data Warehouse, but I'm pretty sure that's not what you mean.
    Can you clarify "refuses to build"? Do you get an error message from Power Builder?
    For sanity, I'd try the same thing on a Windows 2000 machine. That would tend to be a more heavily tested environment (though NT 4 is supported).
    Have you run an ODBC trace to determine if the driver is reporting errors that Power Builder isn't showing you?
    My guess would be that this is a problem with Power Builder. I'd contact those folks to see whether they have any known issues/ workarounds.
    Justin

  • TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
     Cheers, Tom

  • Connecting to db2 from report builder via odbc

    Hi!
    Some manuals said, it is possible to connect to DB2 from Oracle SQL*Plus (we have version 8.0.6.0.0)
    and from Oracle Report Builder.(6.0.8.11.3)
    User must install OCA (Oracle Open Client Adapter for ODBC (6.0.5.29.0)) and make ODBC entry.
    I did it.
    run with: plus80 db2user/db2pass@odbc:db2test
    SQL*Plus made the connection, but with errors:
    SQL*Plus: Release 8.0.6.0.0 - Production on Fri Oct 17 16:12:56 2003
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    Error accessing PRODUCT_USER_PROFILE
    Warning: Product user profile information not loaded!
    You may need to run PUPBLD.SQL as SYSTEM
    Server not available or version too low for this feature
    ORA-00022: invalid session id; access denied
    Connected to:
    Oracle Open Client Adapter for ODBC 6.0.5.29.0
    DB2/NT 08.01.0000
    SQL>
    The error refers PUPBLD.SQL, but I think it is Oracle specific, don't help.
    Worse, that it can't connect from Report Builder, it just throws error.
    If I set OCA_DEBUG=TRUE in registry, I have bonus messages:
    oca-30053 unsupported network call (oracle code: 3115)
    oca-30002 ubofssw function not supported (1010)
    I tried to connect to MsAcces too, but I got same errors.
    Have you any idea, how can I solve this?
    Thanks

    resolved
    I just add the master entry in the c:\Report\NET80\ADMIN\tnsnames.ora, and it works.
    but I can't connect with the system or sys accounts, it work just with scott/tiger.

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

    1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
    2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use, 
    3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
    4. After  5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
    5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
    6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
    7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
    8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
    9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
    10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
    KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

    "I get the feeling that this is a software issue that could probably be solved quite easily"
    Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
    !http://i50.tinypic.com/izvwo1.gif!

  • There are electric charges coming out from the laptop when I touch it. It is just happened when the mac is connected to the power supply.

    There are electric charges coming out from the laptop when I touch it. It is just happened when the mac is connected to the power supply.

    http://reviews.cnet.com/8301-13727_7-57388858-263/ouch-my-mac-shocked-me/?tag=mn col;txt
    Best.

  • Error connecting to BOBJ server from Power Query

    I am getting this error when I try to connect to the BO server from Power Query;
    DataSource.Error: SapBusinessObjects: Unable to connect to the remote server
    Details:
       here it lists my URL which this posts didn't allow me to have.
    I know my server is otherwise up and running.  No problem connecting to Launchpad or CMC or IDT. 
    This is the 1st time I am using Power Query.  What is missing?
    Abdul

    Hi,
    This is a generic error about not being able to reach the server.
    You should make sure that there are no typos in the hostname and to include the port number, which is 6405 by default.
    e.g: http://powerquerysap:6405/biprws
    Tristan

  • Audio not heard from the speakers when iPhone connected to the power cord.

    somtimes no audio heard from external speakers at all, when iPhone is connected to the power cord.
    The troubleshoot I have done successfully was unpluging the power cord from the back of the iPhone then it rests the audio and audio can be heard through the speakers. This issue needs to be addressed to Apple tech support for permanent resolution.

    Tell Apple. This is a user to user forum, we are iphone users like you.
    You can call Apple at 1 800 my iphone or supply feedback to Apple at:
    www.apple.com/feedback/iphone.html

Maybe you are looking for