Connection string for Oracle in instantclient11_1 Driver without TNS

We have Oracle DB without tnsnames.ora.
We are able to connect to the DB using sqlplus from a command line with the following connection string:
username/Password@DomainAdress:Port/DataBaseName.DomainAdress
SYS/****@computerName.Domain.net:1523/DataBaseName.computerName.Domain.net
If we try to connect from the command line only with the DB name and not the FQDN – the connection fails.
We would like to connect using Driver={Oracle in instantclient11_1} We tried the following connection string:
Driver={Oracle in instantclient11_1};Dbq= computerName.Domain.net:1523/ DataBaseName.computerName.Domain.net;Uid=SYS;Pwd=**** as sysdba
We got the following Error:
[Oracle][ODBC][Ora]ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
What should be the right connection string for Oracle in instantclient11_1 Driver?

Thanks for the confirmation.

Similar Messages

Connection String for Oracle from Visual Studio 2012

I have oracle Connection credentials which is to be connected to Oracle 9i.
I have Visual Studio 2012... i m trying to connect to the oracle host.. it gives the following error. "ora-12514 tns listener was not given the service_name"
1. I have installed 32 Bit Oracle Developer Tools for Visual Studio.
2. I m using Windows 7 OS 32 Bit
Please advice
Hai

Maybe this one helps.
https://community.oracle.com/message/2310374
or possibly ask them here.
https://www.oracle.com/communities/index.html
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

What are the username, password and connect string for Designer 6.1.1?

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
Oracle designer6.1.1
- Date/Time
- Browser + Version
IE 6.0
- O/S + Version
Win 98
- Error Msg
ORA-12154:TNS:could not resolve service name.
RME-00220:Fail to connect to repository
These error messages were shown after I entered system, manager and internal, respectively.

Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management

Help in creating the connection pool for Oracle 8i using Jdriver

Hi
Iam pretty new to Weblogic and would be greatfull if some one can help me
out in finding the parameters to be specified in Weblogic console for creating
a Connection pool for Oracle 8i database running on solaris. I have installed
necessary client libraries in weblogic machine.
The details for my database are as follows
database name : mydb
database server : 173.24.24.1
database port : 1521
username : myuser
I would appreciate if you can provide me the following details to be entered in
weblogic console for creating the connection pool
URL
DRIVER CLASS NAME
PROPERTIES
ACL NAME
PASSWORD
Thanks,
S Hari

Hari
Jdbc Connection Pool Configuration
URL= jdbc:weblogic:oracle
DRIVER CLASS NAME=weblogic.jdbc.oci.Driver
PROPERTIES
user=myuser
password=<password in mydb>
server=mydb
After configuring Connection Pool Select Targets tab. Select Server from Available
to Chosen.
Deepak
Hari wrote:
Hi
Iam pretty new to Weblogic and would be greatfull if some one can help me
out in finding the parameters to be specified in Weblogic console for creating
a Connection pool for Oracle 8i database running on solaris. I have installed
necessary client libraries in weblogic machine.
The details for my database are as follows
database name : mydb
database server : 173.24.24.1
database port : 1521
username : myuser
I would appreciate if you can provide me the following details to be entered in
weblogic console for creating the connection pool
URL
DRIVER CLASS NAME
PROPERTIES
ACL NAME
PASSWORD
Thanks,
S Hari

How to dynamically set connection string for report in C# code?

Hi,
I have installed CRVS2010. I have created new Crystal Report WPF Application and new report. I would like to set connection string for report in code dynamically.
Is this possible?
Thanks
Ivana

Lots of posts in this forum on how to set database connections. WPF should not be a consideration as it's just a viewer. The report engine is still the same. Search these forums. Use the search box at the top right corner of this page. Look at samples here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Note that none of the samples above are using WPF, but like I said, the WPF is just a different viewer and will not impact how the report engine logs on to a database. (I think of it as a gray car vs. a red car. Same engine, just the color is different)
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Save Query - An error occurred while creating connection strings for the query

A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

How to change connection string for a form created with b1de

Hi all
i've created a form using the Code Generator tool ob B1DE
My question is how can i set the connection string to a different server and database. doing so after the creation wizard has finished?

Hi,
Why do you need to change the connection string? What are you calling "connection string for a form"???
The only connection string I now about is the one used to connect to the UI API... and this one is fixed for all apps in debug mode and given as parameter when your addon is registered in B1.
The connection string is filled in the code of your generated addon.
Please go to the main class of your addon, in the main method you have the following code where the connection string is filled either with the command line parameters (release mode) or with the fixed value given by SAP. This code doesn't need to be changed...
        public static void Main()
            int retCode = 0;
            string connStr = "";
            bool diRequired = true;
            // CHANGE ADDON IDENTIFIER BEFORE RELEASING TO CUSTOMER (Solution Identifier)
            string addOnIdentifierStr = "";
            if ((System.Environment.GetCommandLineArgs().Length == 1)) {
                connStr = B1Connections.connStr;
            else {
                connStr = System.Environment.GetCommandLineArgs().GetValue(1).ToString();
            try {
                // INIT CONNECTIONS
                retCode = B1Connections.Init(connStr, addOnIdentifierStr, diRequired);
Regards
Trinidad.

Report Designer odbc connection string for data source using a parameter

I am using stand alone report designer 3 for the present and have a question/problem regarding the odbc connection string for MySQL when setting up the data-source
I need to be able to enter a parameter which is the database name i.e. BOE-201401 or say BOE-201312 etc from a list of databases the user can choose from.
at present the odbc connection string points to BOE-201402
the connection string is at present Dsn=Development Server for MYsql;description=MYSQL;server=ldndw01;database=BOE-201402;port=3306
my parameter has the name BOE_DATABASE
and in an expression it is as such
=Parameters!BOE_DATABASE.Value
I want to point the datasource for the report to the parameter value before the user sees the report.

Hi Leslie,
Based on your description, we want to design a report with a dynamic DataSource connection string. There are the basic steps below for your reference:
Create report with static database.
Change data source to report parameter.
Send new database connection string as a report parameter.
More detail information, please refer to the following blog: Dynamic Database in SSRS 2008.
http://haseebmukhtar.wordpress.com/2011/11/09/dynamic-database-in-ssrs-2008/
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

What are the username, password, and connect string for Designer6i R4.1.1

As the title, I tried system, manager and internal.
But it did not work out.
Thank you for your help.

Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management

Unable create Connection pool for Oracle apps Adapter.

Hi All,
We are trying to create a connection pool for Oracle Apps adapter in 11G SOA suite.
However during the process getting the following error:
An error occurred during activation of changes, please see the log for details.
A <jndi-name> is specified for the resource adapter bean in weblogic-ra.xml, however no <resourceadapter-class> element is specified in ra.xml
Can any one help us on this.
Thanks
Parker.

Please refer section "Configuring Connection Information" at below link -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10537/T430238T430340.htm#T464886
Regards,
Anuj

Hi expert,Incorrect connection string for addon

hi expert
I am getting error when connect my addon in client pc.
my addon working fine in server at client side.
but in client i m getting error "Incorrect connection string for addon".in my addon i am using crystal report and two sap b1 user form. thanks in adva.
regards
Rajkumar Gupta
Edited by: Rajkumar Gupta on May 23, 2009 12:49 PM

Hi Rajkumar,
Sometimes this error message is related to the UI server. Please see note 808354 or 852031 and see if this has any effect.
If not, please post up a code sample so we can take a look,
Regards,
Niall

Steps to create Connection pool for Oracle apps Adapter.

Hi All,
Could please tel me the steps to create connection pool for Oracle Apps Adapter.
Thanks,
Parker

Steps are given in section "Configuring Connection Information" in Apps Adapter User guide at below link -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10537/T430238T430340.htm#T464886
Regards,
Anuj

How to install Oracle Lite ODBC driver without connecting the mobile server

My Oracle Lite version is 10g R3.
I am using branch office version application.
I wanted to connect oracle client database(.odb file) via Lite DSN in a windows XP machine without installing the client in that device.
Some of my users wanted to access the client database from backend which requires a DSN entry in that device.Oracle Lite ODBC gets registered in the device only when we do a setup from the mobile server or if Oracle 10g Lite MDK is installed.
I do not want either of this to be done in my user PC. I wanted a ODBC utility which will register oracle Lite ODBC Driver (Normal & Cleint) in the user PC so that i can manually create and configure the DSN.
Does anyone have a solution for this?
Regards,
Ashok Kumar.G

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

Driver and connection string for DB2 7.1 IBM Z/OS Mainframe

Hi ALL,
Could someone please provide me the connection string and driver for DB2 7.1 IBM Z/OS Mainframe?
Regards,
XIer

Hello,
With SAP and DB2 V7 still ICLI which is part of the operating system is used for DB connectivity. For details on the setup see related docs for SAP releases up to 6.20 .
As of Netweaver 2004 DB2 V8 and DB2 Connect is used.
If you're talking about Java you need a license either from IBM or if you're OEM customer for DB2 on z/OS it is delivered automatically.
Regards,
Thomas

SQL 2000 ODBC CONNECTION STRING FOR SQL 2008

i have vb 6 application. Database is SQL server 2000.
my connection string is (using odbc driver),
        .ConnectionString = "Driver={SQL Server};SERVER=" & mServer & ";DATABASE=mydb;UID=" & mLogin.Username & ";pwd=" & mLogin.Password & ";"
Now i have tried this application with SQL server express 2008 R2
Can i still keep the old connection string? will there be any problem in future?
(if i have to change then have to change at so many places.....)
I can run application without any problem for now (not changed connection string to new one)
otherwise i have to use ODBC or OLEDB which are,
        .ConnectionString = "Driver={SQL Server Native Client 10.0};SERVER=" & mServer & ";DATABASE=mydb;UID=" & mLogin.Username & ";pwd=" & mLogin.Password & ";"
or
        .ConnectionString = "Provider=SQLNCLI10;SERVER=" & mServer & ";DATABASE=mydb;UID=" & mLogin.Username & ";pwd=" & mLogin.Password & ";"
if i have to change to new connection string Which one is better to use odbc or oledb.
h2007

personally I favor ODBC as it is easy to use sometime. Additionally you can check the link below:
http://social.msdn.microsoft.com/Forums/en/sqlintegrationservices/thread/19e0c306-0be4-46b5-b207-0937931d63a7
cheers!!!
Vatsa
www.objectiveprogramming.com

Connection string for Oracle in instantclient11_1 Driver without TNS

Similar Messages

Maybe you are looking for