Connection Test MDX PARSER - Error

Hi,
I'm installing BPC 7.0 Netweaver.
When I test Connection MDX PARSER rfc in SM59 we get the following time out error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host PLATONTEST016 / sapgw00
DETAIL: no connect of TP mdxsvr from host PLATONTEST016.Platon.dk after 20 sec
COMPONENT: SAP-Gateway
SAP Note 1032461 have been applied !!!
Have anyone an idea solve this issue? Any input welcome!

Hello Brian,
Good Day!
I am also having the same problem and read the same note. But in my case I can't seem to register librfc32.dll in the application server.
This is the error message "C:\WINDOWS\system32\librfc32.dll was loaded DllRegisterServer entry point was not found. This file cannot be registered."
Here is our system details:
ECC 6.0
SAP_BW 700
SAPGUI 710
I am hoping someone will be helping us.
Sincerely,
Nathan
Edited by: Nathan Ray Deluao on May 20, 2009 11:34 AM

Similar Messages

MDX Parser Error in Data Mining

Hello Colleagues,
I have created the Application Process Designer(APD) for ABC analysis. Here APD is saved and activated successfully. Now while executing, it fills the data to datatarget, but giving error "Error occurred in starting the PARSER.Error opening in RFC connection. Syntax error in MDX statement".
In help, it says go to SM59 and test the connection of MDX parser. Now there testing is failing, but What I need to do to correct the connection?
Regards

Hello,
please read the OSS note: 149809
Hope this helps
Michael

MDX Parser error

Hello,
While checking the MDX Parser connection in TR SM59, I get the following error...
Error occurred when starting the parser: Error opening an RFC connection.
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System response
Error opening an RFC connection.
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
===================================
The same TCP/IP connection (with similar properties in working in other BW system). But giving error in the system where I am trying to write some MDX statement (TR MDXTEST). It goes to debug mode as soon as MDX statement is executed in MDXTEST.
Regards
Pankaj

Your RFCDestination is not correct. Please check it in SM59.
The program specified there may not be on the app server. Have you verified this already?
cheers,

Liveoffice connection issue(XML Parse error..(LO26005)

hi,
I am using liveoffice sp3 to map crystal report 2008,I have mapped around 33 liveoffice connections in a xcelsius 2008 sp3.Now when I add an extra connection it is able to add one extra connection but when I execute dashboard after upoloading the swf in infoview ,it is giving me "Failed to parse XML. (LO 26005) (LO 26000)"** . Any help?
an early response will really help me...

Thanks Vinay,
Appologies for late reply.
Our Bo server is SAP Business Objects 3.1 SP3 FP 3.6 (12.3.6u2026)
and I do have liveoffice :sp3 and fixpack 3.6
Xcelsius Version : 5.3.5.0
despite the server and client are in same patch level still we are getting the sam eerror.
waiting for your response..

MDX Parser: Error during allocate

Hi, I'm trying to create some WebI reports over BW Queries, but when I try to refresh the WebI document, it throws an error that more less says "timeout during allocate / CPIC-CALL: ThSAPCMRV", I know that Note 1032461 is related, but unfortunately I don't know where to find the librfc32.dll by itself on SAP Support portal, the path defined in such note is no longer valid.
I copied librfc32.dll from c:\windows\syswow64 to E:\usr\sap\<SID>\SYS\exe\uc\NTAMD64, and tried to run manually the mdxsvr with the line suggested on the note
mdxsvr -amdxparser -g <host> -x <gateway> -t
but get the error: This application has failed to start because LIBRFC32.DLL was not found
I seems to be a problem with the adequate version of librfc32.dll (version on system32 is 6405.5.318.6424, while the one on syswow64 is 7200.1.39.6461
The mdxpars.dll is version 7010.0.4300.27
I am also aware of note 1434994, where it describes a required update on the BW 7.20 SP, the current version of mdxpars.dll is 7010.0.4300.27
Any suggestions?

Hi,
I would suggest you open a case with support so that you can get the right DLL for your environment
ingo

APD failure due to MDX Parser starting issue

Hello,
As part of BW on HANA migration, we have recently migrated Dev system to HANA database and during testing we have issue for one of the APD's
which when triggered failed with the below error messages: Error occurred when starting the parser:timeout during allocate / CPIC- CALL: 'ThSAPCMRCV' Syntax error in MDX statement Termination: Error when executing the query Processing was canceled And the RFC connection for MDX PARSER was also failing. Subsequently, basis implemented the SAP Note 1032461 - MDX parser does not start. Which resolved the issue with the RFC connection. However, the APD is still failing. The error message we get is as below for the same: Error occurred when starting the parser: Function RRTS_PARSE_MDX is not available Syntax error in MDX statement Termination: Error when executing the query Processing was canceled. Request your help on the same.
Most of the SDN forums on this topic advised on the SAP Note 1032461. However, despite implementing the same note our basis team couldn't succeed in resolving the issue. Thank you!

Hi Meduru Avinash,
As you rightly told, most of the time note 1032461 is referred to solve this issue.
Some where I have read that we need to refer 638701 also,
like adding gw/cpic_timeout in your system, if it is not available.
BR
Prabhith

MDX Parser RFC is not working

Hi,
I am getting the following error when I test connect the MDX Parser RFC destination.
Logon -> Cancel
Error Details -> connecton closed (no data)
I have upgraded the latest mdxsvr.exe and mdxpars.dll in the kernel directory and also got the librfc32.dll in the kernel. I got updated librfc32.dll in the registry also. I checked various SAP notes, but none helped.
The main problem was when starting MDX parser:
===============================
Error occurred when starting the parser: connection closed (no data)
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
connection closed (no data)
=================================
Pls give any inputs on this.
Thanks,
Abdul

this could be because the RFC destination host is not maintained in the hosts file on the application servers... check that you can reach the host and see if that fix your issue.
Regards
Juan

MDX Parser doesn't work

Hello, everybody.
Standart TCP/IP connection named "MDX Parser" doesn't work. It says "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur".
When I try to run mdxsvr in command line it says that librfc32.dll could not be found.
And there is no such dll in the directory with mdxsvr, but there is a librfc32u.dll.
How can I solve this problem?
P.S.
My server parameters:
- IA64
- Windows 2003
- SAP NetWeaver 2004s
best regards,
Dmitry

Thanks for all of the input everyone. We too was experiencing the RFC failure on 2 new BI application servers. The good thing is we had other servers that worked fine. So we were able to copy the c:\windows\system32\librfc32.dll from one server that was working to the servers that were failing.
All of the posted helped me figure out that even though we are using 64Bit and unicode it actually need the librfc32.dll which appears to be non-unicode and of coarse 32bit.
The real trick was implementing the MS "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"
http://www.microsoft.com/downloads/en/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en
Once I installed that MS patch I could successfully register the dll "regsvr32 c:\windows\system32\librfc32.dll"
And then the RFC now tests from all application servers.
Just to recap, our issue was the MDX Parser worked from the 2 nodes of the cluster and 2 application servers, but the 2 new servers the loads would fail if it happen to run on that server. running the RFC from that specific server would fail.
Now all is good
Thanks again

Power Bi for o365 - Odata connection test worked but "The server encountered an error processing the request. See server logs for more details". Port 8051? Authority\System

We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]

O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error in Connection Test when connecting to R/3

Hi All,
Although I am able to connect to the R/3 server through the portal (SAP screen is visible and the transactions are running,) the Connection Test fails at the second step i.e. the Connector settings and User Mappings. I have checked these settings and they appear to be fine.
The Test connection results are as follows:
a> Retrieval of default aliases successful.
b> Connection Failed. Make sure User Mapping is set correctly and all connection properties are correct.
I am also unable to connect to the data source through the Visual Composer. Although the systems are visible, the Bapis are not retrieved. It returns the same error. I have even installed the Portal Add-ons for Visual Composer.
Please help.
Regards,
Deepak.

Hi Guys,
Thanks to you all for the suggestions. Rajiv, the settings are as per your suggestions, yet its not working. Also, we are using UIDPW method to logon to the R/3 system. We are able to connect to the R/3 system through the portal and even the transactions are running. The problem is when we test the connection. It fails on step 2. The problem this is causing is that we cannot connect retrieve the data from the R/3 system through Visual Composer. We can connect to the portal thru it though and even the systems are available. But once we select the system and try to retrieve the BAPIs, it throws an error.
We are using EP6.0 SP9 and Visual Composer 6.0 Patch 5.
Regards,
Deepak

Error during connection test in C4C

Hi,
during connection test in C4C i receive Service-Ping-Error: Internal Server Error (500).
The following error shown in HCI.
Inbound processing in endpoint at https://iflmapgbt104xxxxavtaio-xxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
Message Processing Log{
IntermediateError   = true
MessageGuid         = AFUUKFubmbS4sE_0LvLxGiXTI0v4
Node                = xxxxxxxx.od.sap.biz
OverallStatus       = FAILED
StartTime           = Thu Mar 26 15:40:11 UTC 2015
StopTime            = Thu Mar 26 15:40:11 UTC 2015
Children [
    An error has occurred in CXF Inbound Request{
      Error               = Inbound processing in endpoint at https://iflmapgbt104xxxxxavtaio-xxxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
      StartTime           = Thu Mar 26 15:40:11 UTC 2015
      Status              = FAILED
Can anyone help me on this issue?
Cheers
Florian

Hi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian

SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

Hi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok

Odbc connection test success but can't link the database to oracle with 1013 call failed error.

i am using my MS Access 2013 to connect with my oracle database. I created the odbc link and successfully have connection test pass. However i can;t link the database with my MS access. When i am using different software (mapinfo), i am able to connect to oracle database. The error is"1013: user requested cancel of current operation"

In MS access, i open the external data and select odbc. Select my odbc link created previously, enter the password and after a while the error message pop up.
But if i am using another tools, such as SQL Developer or Mapinfo, i will able to connect to oracle database using the same odbc link.

System Configuration - SAP Web AS Connection - connection tests error

hi
I have a SAP ECC 6.04 and sap portal 7.01
When I entered in option System Administration / System Configuration / System Landscape / Portal Content Tree / Systems / SAP_ECC (System created by me)
I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
5. The host name htc-svr-erp.humantech.es was resolved successfully.
6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.
...also see a red "X" near a title SAP Web AS Connection
I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
In "old sap system", stack java + abap
http://img830.imageshack.us/img830/9755/oldsysstack.jpg
In "new sap system", stack java separated abap
http://img97.imageshack.us/img97/8627/newsysstack.png
In Portal
In "old system", I created "SAP_HCM" System
In "new system", I created "SAP_ECC" System
The "Connector" view (Object Option)
http://img706.imageshack.us/img706/3776/oldsysconnector.jpg (Old System)
http://img269.imageshack.us/img269/914/newsysconnector.jpg (New System)
*The "Internet Transaction Server (ITS)" view (Object Option)
http://img824.imageshack.us/img824/5043/oldsysits.jpg (Old System)
http://img822.imageshack.us/img822/1314/newsysits.jpg (New System)
The "User Management" View (Object Option)
http://img20.imageshack.us/img20/8646/oldsysuserman.jpg (Old System)
http://img97.imageshack.us/img97/5339/newsysuserman.jpg (New System)
The "Web Application Server" View (Object Option)
http://img101.imageshack.us/img101/6155/oldsyswas.jpg (Old System)
http://img69.imageshack.us/img69/434/newsyswas.jpg (New System)
My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
I run tcode RZ10 in backend after "Extended Maintenance"
http://img15.imageshack.us/img15/8711/oldsysrz10.jpg (Old System) (Here do not exist parameter icm/server_port_1 )
http://img512.imageshack.us/img512/9268/newsysrz10.jpg (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)
Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
also in SAP Systems, I run tcode SICF and enter in "Port Information"
http://img265.imageshack.us/img265/5281/oldsysport.jpg (Old System) (two ports)
http://img441.imageshack.us/img441/7905/newsysport.jpg (New System) (three ports)
The "Information" view (Object Option)
http://img13.imageshack.us/img13/2012/oldsysinfo.jpg (Old System)
http://img714.imageshack.us/img714/6941/newsysinfo.jpg (New System)
My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service ?
The "No Category" group (Object Option)
http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg (Old System)
http://img193.imageshack.us/img193/3800/newsysnoncat.jpg (New System) (in this System does not exist the parameter sysnr , is it correct?)
The "Permisions" Option
http://img825.imageshack.us/img825/886/oldsyspermin.jpg (Old System)
http://img243.imageshack.us/img243/2057/newsyspermin.jpg (New System)
The "Delta Link Tracer" Option
http://img716.imageshack.us/img716/798/oldsysdelta.jpg (Old System) (two levels)
http://img828.imageshack.us/img828/8057/newsysdelta.jpg (New System) (three levels, is it correct?)
the other view the same (Old Sytem and New System)
The "Connection Test" Option
http://img412.imageshack.us/img412/5789/oldsystest.jpg
http://img243.imageshack.us/img243/5237/newsystest.jpg
Edited by: Ivan Quiroz on Sep 21, 2010 12:42 PM

 Excuse me, because the message Editor has problems, I edited with html tags for best view 
 
 hi
 
 I have a SAP ECC 6.04 and sap portal 7.01
 
 When I entered in option System Administration /System Configuration /System Landscape / Portal Content Tree / Systems /SAP_ECC (System created by me)
 
 I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
 
 SAP Web AS Connection
 Test Details:
 The test consists of the following steps:
 1. Checks the validity of system ID in the system object.
 2. Checks if the system can be retrieved from the PCD.
 3. Check whether a SAP system is defined in the system object
 4. Validate the following parameters: WAS protocol; WAS host name
 5. Checks if the host name of the server can be resolved.
 6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
 7. Checks HTTP/S connectivity to the defined back-end application
 
 Results
 1. The system ID is valid
 2. The system was retrieved.
 3. The system object represents an SAP system
 4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
 5. The host name htc-svr-erp.humantech.es was resolved successfully.
 6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.*
 7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.

 
 ...also see a red "X" near a title SAP Web AS Connection
 
 I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
 
 In "old sap system", stack java + abap
 
 <a href=http://img830.imageshack.us/img830/9755/oldsysstack.jpg>Stack Java + Abap<a>
 
 In "new sap system", stack java separated abap
 
 <a href=http://img97.imageshack.us/img97/8627/newsysstack.png>Stack Java and Stack Abap</a>
 
 In Portal
 
 In "old system", I created "SAP_HCM" System
 In "new system", I created "SAP_ECC" System
 
 The "Connector" view (Object Option)
 
 <a href=http://img706.imageshack.us/img706/3776/oldsysconnector.jpg> (Old System)</a>
 <a href=http://img269.imageshack.us/img269/914/newsysconnector.jpg> (New System)</a>
 
 The "Internet Transaction Server (ITS)" view (Object Option)
 
 <a href=http://img824.imageshack.us/img824/5043/oldsysits.jpg> (Old System) </a>
 <a href=http://img822.imageshack.us/img822/1314/newsysits.jpg> (New System) </a>
 
 The "User Management" View (Object Option)
 
 <a href=http://img20.imageshack.us/img20/8646/oldsysuserman.jpg> (Old System) </a>
 <a href=http://img97.imageshack.us/img97/5339/newsysuserman.jpg> (New System) </a>
 
 The "Web Application Server" View (Object Option)
 
 <a href=http://img101.imageshack.us/img101/6155/oldsyswas.jpg> (Old System) </a>
 <a href=http://img69.imageshack.us/img69/434/newsyswas.jpg> (New System) </a>
 
 My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
 
 I run tcode RZ10 in backend after "Extended Maintenance"
 
 <a href=http://img15.imageshack.us/img15/8711/oldsysrz10.jpg> (Old System) (Here do not exist parameter icm/server_port_1 )</a>
 <a href=http://img512.imageshack.us/img512/9268/newsysrz10.jpg> (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)</a>
 
 Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
 
 also in SAP Systems, I run tcode SICF and enter in "Port Information"
 
 <a href=http://img265.imageshack.us/img265/5281/oldsysport.jpg> (Old System) (two ports) </a>
 <a href=http://img441.imageshack.us/img441/7905/newsysport.jpg> (New System) (three ports) </a>
 
 The "Information" view (Object Option)
 
 <a href=http://img13.imageshack.us/img13/2012/oldsysinfo.jpg> (Old System) </a>
 <a href=http://img714.imageshack.us/img714/6941/newsysinfo.jpg> (New System) </a>
 
 My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service?
 
 The "No Category" group (Object Option)
 
 <a href=http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg> (Old System)</a>
 <a href=http://img193.imageshack.us/img193/3800/newsysnoncat.jpg> (New System) (in this System does not exist the parameter sysnr , is it correct?) </a>
 
 The "Permisions" Option
 
 <a href=http://img825.imageshack.us/img825/886/oldsyspermin.jpg> (Old System) </a>
 <a href=http://img243.imageshack.us/img243/2057/newsyspermin.jpg> (New System) </a>
 
 The "Delta Link Tracer" Option
 
 <a href=http://img716.imageshack.us/img716/798/oldsysdelta.jpg>(Old System) (two levels) </a>
 <a href=http://img828.imageshack.us/img828/8057/newsysdelta.jpg> (New System) (three levels, is it correct?) </a>
 
 the "System Aliases" Option
 
 <a href=http://img265.imageshack.us/img265/7574/oldsysalias.jpg> (Old System) </a>
 <a href=http://img256.imageshack.us/img256/9817/newsysalias.jpg> (New System) </a>
 
 The "Connection Test" Option
 
 I based in <a href= http://img64.imageshack.us/img64/6638/essalias.jpg> ESS SAP Documentation </a>
 
 In the seven point is diference (blue box) in the <a href=http://img412.imageshack.us/img412/5789/oldsystest.jpg> (Old System) (SAP_HCM System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.) </a> and <a href=http://img243.imageshack.us/img243/5237/newsystest.jpg> (New System) (SAP_ECC System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.)</a>
 
 I desactivated Firewall in my SAP Server and reviewed in <a href=https://forums.sdn.sap.com/thread.jspa?threadID=946905>SAP Forums </a> my problem but nothing
 
 Could This error also could be the problem that I get an error in the JCO Destination?
 
 <a href=http://img819.imageshack.us/img819/826/oldsysjcosso.jpg>(Old System) (Succesfully)</a>
 <a href= http://img822.imageshack.us/img822/4226/newsysjcosso.jpg>(New System) (com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Issuer of SSO ticket is not authorized)</a>
 
 because I configure SSO correctly (I configured last year SSO in "Old System"),I run tcode SSO2
 
 <a href=http://img709.imageshack.us/img709/7194/oldsyssso2.jpg>(Old System)SSO2 Tcode</a>
 <a href=http://img830.imageshack.us/img830/9704/newsyssso2.jpg>(New System)SSO Tcode</a>
 
 <a href=http://img185.imageshack.us/img185/9279/newsyssso22.jpg>(Old System) SSO2 Tcode Details</a>
 <a href=http://img227.imageshack.us/img227/416/oldsyssso22.jpg>(New System) SSO2 Tcode Details</a>
 
 <a href=http://img530.imageshack.us/img530/8710/newsyslog.jpg>(New System) In the SAP Logs: *** J2EE_ADM_DA1 | USERMAPPING.USE | USER.R3_DATASOURCE.J2EE_ADM_DA1 | | systemtype=[(none)], system=["UMESystemLandscapeDummy"], uses strong encryption=[false], remote user ID=[(none)] ***
</a>

Error in remote call of destination MDX PARSER.

Hi friends,
creaed one req for importing appset into target system, while importing req (Operating systgem) getting error message.
Error in remote call of destination MDX PARSER.
what might be reason ?
Thanks,
Naresh

This is caused by RFC user being set as for a standard Client-Dependent Objects transports.
Add the profile S_BI-WX_RFC to user(used for import request)

Connection Test MDX PARSER - Error

Similar Messages

Maybe you are looking for