Connection through iPhone on notebook but safari doesn't recognise  connection  recognise

Connection through Iphone put safiri doesn't regonise connection? Only happened after connecting with home WIFi which I don't want to use since I don't pay the Bill.

You need to disconnect and remove that other WIFI network from your system.  If it still won't work after that, try a reboot of the system before doing anything else.  Make sure you clear the checkbox about restarting all programs automatically after restart.

Similar Messages

  • Internet connection okay, but safari doesn't work !

    Dear All,
    Internet connection okay, but safari doesn't work ! Version 6.0.2
    Appriciate your support

    hi there Michael
    sorry for the delay was on leave
    when i say download the software from the Apple's website i mean download the software update for mac os x 10.3.9
    as once you reinstall panther again it will revise back to the original version of the OS which came along with the computer when you purchased which will cause safari to be incompatible with
    so once you do a software update for you operating system it will get it compatible with safari
    so to get the update you can download it from the computer you have it burn the update on a CD or DVD and then install it on this computer
    you can get the download from
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
    just click on the link above to get to the page then click on the number 117mb on the upper right hand corner
    once you have downloaded it burn it to a disc and install it on your computer
    hey sorry if i did not make myself clear earlier

  • I have connected my iMac by wifi to a hotspot but safari doesn't connect...

    I have connected my iMac by wifi to a hotspot but safari doesn't connect...

    my email works, so it is connecting.  It shows a chain link on the wifi symbol too

  • HT1430 Hi I am having a problem to delete call log in iPhone 3GS from last 1 month, I have restore iPhone many times but it doesn't works, pls give me a solution , whenever I try to delete call log it's hang for some time.

    Hi I am having a problem to delete call log in iPhone 3GS from last 1 month, I have restore iPhone many times but it doesn't works, pls give me a solution , whenever I try to delete call log it's hang for some time, pls tell me how to restore call delete option

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • I'm a singer and recently bought a Macbook Pro.  I'd like to use it to play music through my PA system but it doesn't seem compatible as no sound is coming through.  It is however coming through my smaller Bose system.

    I'm a singer and recently bought a Macbook Pro.  I'd like to use it to play music through my PA system but it doesn't seem compatible as no sound is coming through.  It is however coming through my smaller Bose system.  My main system is Alto APM80.1000 with Proel speakers.

    Hi it's a headphone jack and two larger (microphone type jacks?) at the other end.  Please excuse my not not knowing the name of anything - I know where everything goes but not the names!  So if I press Alt and the sound icon at the same time what output should I be choosing?
    I've tried plugging into the red and white tape in tape out and the front of the amp with a headphone/red and white jack lead and a slight sound comes out but of bad quality.
    When I'm going through my bose it's an easy headphone to headphone lead and is working perfectly.
    Thanks

  • I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

    I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

    Still in the same location:
    File > Get Info > Open with (select) > Change All (button)

  • Need to restore iphone 5 but itunes doesn't recognise it

    Hi
    I tried to update my iphone 5 to the latest iOS7 using iTunes but I got error message 4005. My phone is stuck on the connect to iTunes screen and I understand that I need to restore it to factory settings and can do this using iTunes. But when I plug my iphone into my pc (HP notebook, windows 7) iTunes doesn't recognise it. Apparently it should recognise that my phone is in recovery mode and ask if I want to restore it. This does not happen. I have tried the suggestions of many people with a similar problem in the support community but none of the solutions has worked for me and I have followed the resolution steps on the Apple support pages but have had no luck there either. I can see my iphone is in recovery mode in device manager on the pc, iTunes is up to date, I have uninstalled and re-installed iTunes according to Apple instructions, I have re-started the apple mobile device service, I am using USB 2.0 port not USB 3.0 and directly to the computer not via a hub.
    If anyone can provide any help and useful suggestions on this I would really appreciate it! Thanks!

    Hey bron_cross,
    Wow, Superb troubleshooting so far! Usually for the symptoms you have described, I recommend the sub-step titled “If the device is not recognized while in Recovery Mode” located in Step 5 of this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    However, it seems like you have exhausted all of the suggestions in that step. Did you happen to move on to Step 6: Check for third-party software conflicts? If not, here is the excerpt:
    Certain phone and cellular device connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, Sony, Android, LG, Sierra, Huawei, Pantech, or Motorola may cause your device not to be recognized. If you have such software on your computer:
    1. Uninstall the phone or cellular connectivity software temporarily, and test.  Contact the manufacturer of this software for assistance in doing this. If you use the third-party phone or cellular device for your Internet connection, try connecting to an alternate network using Wi-Fi or Ethernet.
    2. Remove iTunes and all related Apple software by following this article (for Windows XP), or this article (for Windows Vista, Windows 7, and Windows 8).
    3. After reinstalling iTunes, test the device.
    4. If you still need your third-party phone or cellular connectivity software that was removed, reinstall this software and test your device to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
    Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.
    Thanks,
    Matt M.

  • Iphone says 4G but internet doesn't work

    My iphone has full bars and 4G icon but my internet has no connection. 

    The phone is about one year old.  I can make and receive calls.  I noticed this problem about a month ago. Once I have WiFi connection, internet works fine.  It's really annoying when the phone says 4G (internet connection), but internet doesn't work.  If the AT&T network is not available, why does my iphone say 4G?  Thanks

  • I have an old Ipod Touch, Version 1.1.5 (4B1). I have just attached it to the computer to update my music but Itunes doesn't recognise it.  What can I do?

    Itunes doesn't recognise my old Ipod Touch - I have attached it to the computer but nothing happens.  How can I update it?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod in recovery mode but itunes doesn't recognise it

    Basically, I upgraded my iTunes to 9.0.3 yesterday. During this I got a message saying I should upgrade my iPod or something like that. During this there was an error, I can't remember what but then, my iPod disappeared from the devices. When I looked at the iPod it was telling me to connect with iTunes. When I did the computer said Computer found new device- Apple Mobile Device (Recovery Mode). However, iTunes doesn't recognise it! I have tried uninstalling itunes and many things. I can't get it to work again. Please help!

    I have the same problem. Yesterday I connected my iPod Touch to my PC and iTunes prompted me to update the ipod's software to 1.1.2 (I think thats the new one?), I accepted and it proceded to download it. When it finished downloading it tried to update the software but for some reason it failed. An error message came up saying that the ipod will have to be restored. I went ahead and tried to restore it, it gave an option for restore and update, that didn't work. My iPod won't even turn on now, it just shows the iTunes icon and the USB cable. When I connect to my PC iTunes says its in recovery mode and the software tries to do the update, the iPod screen shows the Apple logo and the updating icon, the screen goes blank and the process starts again, after a couple of attempts an error message appears on screen saying an error occurred and gives an error code of 1611 (or something like that).
    Holding down sleep and home together doesn't do anything.
    What is up with it? I've tried the same thing in my girlfriend macbook and the exact same error happened.

  • I just got an iPhone 4s and I added a passcode, the problem is I forgot my passcode. It says 'iPhone is disabled' but it doesn't say how long for or connect to itunes. How can I get my phone back? Any help please:'(

    My iPhone is locked and doesn't tell me how long for, and it doesn't say to connect to itunes... Please help me:(

    It did not work on mine It just turned it off then I tried to remember my pass code and it locked me out again, Also when i get on itunes it says it cant do anything for me because there is a passcode on my phone

  • IOS Internet apps connect fine, but safari doesn't -help!

    I have a number of apps that connect fine to the internet via wifi ipad 3
    Safari just shows a fast load progress bar zoom, but never more than a blank page
    I have deleted history and cookies, and restarted the iPad...
    Any ideas?

    A small number of sites will come up.
    Google chrome works better but not perfect
    I think perhaps it's the wifi in this building

  • The candy crunch icon disappeared off my phone the other day. I try to redownload it through the App Store, but it doesn't give me the option. Will only let me open it and I can resume play. What's going on?  All other apps still there.

    The candy crunch icon has disappeared from my phone. I went to the App Store and pull it back up and it doesn't give me the option to install it, just open. When I do, it takes to my game where I left off. So my game is still there, but I can't install it on my phone.

    Hey PlayerPS,
    Thanks for the question, and welcome to Apple Support Communities.
    It sounds like the application you are looking for is indeed still on your iPhone. You can confirm this by searching in the Spotlight Search for this application. It may have accidentally been moved to a folder, or an additional Home screen:
    iOS: Understanding Spotlight Search
    http://support.apple.com/kb/HT3636
    via http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    Thanks,
    Matt M.

  • Clicking on document link opens Safari, but Safari doesn't open link

    For some time -- even before upgrading to OS10.8 -- I've been having an issue with Safari. I receive links in emails or other documents, click on them, and when Safari opens, it fails to load the link. Sometimes I see the URL appear in the address bar for a moment, but it vanishes and I am left with a blank "Untitled" Safari page. If I then click on the email (or other) reference link again -- now with Safari open -- everything works fine. I've not seen this reported as a problem by anyone else so am wondering if I have a software conflict. There are two programs running from within Safari, one is 1Password (although that requires a manually entered password to open) and the other is Norton Identity. Perhaps one of those is a culprit. Anyone else seen this behavior?

    More than likley, Norton is the culprit. Norton software has caused so many Mac users problems over a long period of time.
    Results from an Apple Support Communities search for Norton > Community Search: Apple Support Communities
    Follow the instructions at the Symantec/Norton site for uninstalling Norton Identity.
    As for one 1Password. Using the pre installed Apple native Keychain Access utility is much better to use than third party. Keychain Access is located in HD > Applications > Utilities.
    Remove Norton Identidy first, restart your Mac and try opening a link from email to test.

  • HT1212 I followed the steps to restart my iPhone 4s completely after it was disabled; and it is still asking me to enter the forgotten passcode. Trying to restore from backup it says I have to turn off 'find my iphone" first, but  Cloud doesn't recognise

    I am currently trying to download the latest iTunes version but I don't know that is going to help me as the problem is basic to Apple security.

    If Find My iPhone is on and you cannot identify your phone as you said in the previous post, then it is not logged into your account. Is this a used phone that you are trying to restore that was not activated with your Apple ID and password? It isn't asking for a passcode, it is asking for the Apple ID and password, correct?
    I think you need to tell a little more about this phone. I don't think you have told the entire story. Even the part in your first post about downloading iTunes. What kind of computer and operating system are you using? What version of iTunes do you currently have? Did you purchase and activate this phone when it was new?

Maybe you are looking for

  • Sub-report summary fields

    I have two sub-reports on a report. Each of these sub-reports have a quantity summary on them. I want to find the difference between these two summary totals. So let's say Sub(A) total is 200 and Sub(B) total is 25, is there a way to subtract the 25

  • Java is not working any more

    The last 6 months Java has not worked at all. I have Java 1.4.2 and 5.0 installed. I have tried re-installation, emptying buffers, resettings safari, using other browsers, created new user account in OSX and so on. I have tried all the tricks in the

  • Nokia N95 and Phone Autolock

    Just a simple question, when I set the "Phone Autolock Period" to anything different from "0" my phone locks after this period, but the Phone request the device unlock code when it is started, is there any option to keep requesting the code at start

  • Can i resize my project in fcpe?

    it seems my sequence settings didn't match my source footage. i have a squeezed picture with black on each side. shouldn't i be able to click on the clip in the sequence and go to modify>scale to sequence? i don't have that command though. is it caus

  • PDF links on IE and Windows 7

    I click on any link that I know is a PDF file on Windows 7.  IE 8.0 and the latest version of Adobe Reader.  The link does not open in IE.  Some I can do as a save as target others do not give me the option.  Any Ideas????