Connection time out
Hello everyone,
I'm using modem PK5000 from Century Link. My other two desktops are using Window and in the same room w my modem.
I got connection time out every time my computer started playing the screen saver.
All I have to do is restarting my modem but it's so unconvinience.
I called Century Link customer service and all they told me is changing the channel but it didn't solve the problem.
At school and other people's places, my wifi works just fine.
I used cleanmymac about a month ago and this problem started a week ago.
Can cleanmymac cause the problem? If so, how can I check and fix it?
I check the apple store to update my software but everything is up to date.
Can it be the firmware of my modem? My brother who uses the two desktops (and they connect to the modem with LAN cables) upgraded firmware last week and it seems like when the problem started.
And when my Mac loses the wifi signal, my printer still has the signal, but my desktop cannot log-in to page 192.168.0.1 which manages the modem and wifi even though the desktop connects w my modem by LAN cable and it still connects to the internet.
If you have any clue, please help!
Thank you so much!
Thanks Todd, Wayne,
this network timeout sure seems to be the guilty one!
I've changed it, lets see if it's fixed but sure looks like it.
The thing is that I was looking for GWWS tuning here :
http://edocs.bea.com/salt/docs20/ref/comref.html#wp1117652
but should have looked here
http://edocs.bea.com/salt/docs20/admin/config.html#wp1056667
Thanks,
Gary
Similar Messages
-
Itunes update to firmware fails, because connection times out.
I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Tue Nov 15 11:32:39 2011
Lease Expires: Tue Nov 15 11:32:38 2011
DNS Servers: 192.168.2.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.Disable your firewall/security software and try again.
-
Message Mapping - connection time out
Hi ,
I hae just created a message mapping and when I click on Test tab and load a payload in source and try to test the mapping , it gives me connection time out error from java...
What could be wrong ? Mapping involves an XML to IDOC .
Cheers,Hello,
I think so (Experts, please correct me if I'm wrong). Before, we had a scenario in which the external definition was about 960kb. It really did post issues when testing in the message mapping itself. There are three options:
a.) Use less detail in your sample message mapping, in this way you can correct the error in the mapping itself.
or
b.) Test in operation mapping, and then do the correction in message mapping afterwards. If the testing is successful, make sure that you don't click the drop down icon. Instead, export the result as a zip file and then extract it. (if this hangs, go for c)
or
c.) Test at runtime
Hope this helps,
Mark
Edited by: Mark Dihiansan on Dec 20, 2010 10:09 AM -
Connection time out error in server proxy
Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
DiviaTo increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found. -
Connection time out error in HTTP
Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmadAlso, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin -
Hello sir,
Whenever i install addon on SAP B1 i get connection time out error can anyone help meManish,
it depends on how you set your connection. it must be through command line argument. if you have set your connection string as
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
then change it to
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
and give the connection string 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as your command line argument in project properties -- Debug tab. prepare the addon ard and try installing it.
regards,
Binita -
Connection time-out issues each first try of pacman
Hi,
I am new to arch. I keep getting a connection time-out each time I use pacman for the first time. I have to do a ctrl+z to stop the command and then delete the db.lck file and then when I run pacman again, any operation on pacman that I had tried works flawlessly.
Do I need to do something to fix this? I check there was a similar thread in 2012, but it ended without any results.
Cheers,
Prashanthgeekoo wrote:@WonderWoofy: The second time on it works with the same mirrors. I am using the Indian http mirror at the top of the list. US mirror follows. When it fails, it takes a sweet 30 odd minutes to run through all of the mirrors and fails.
I'm pretty sure you can disable all the mirrors you don't want to use, try lowering the list to only those in Asia to minize your waiting time atleast. I get a time-out occasionally on the first run, but running anything inside China's GFW is a roll of the dice. -
"connection time-out occurred" when my mac goes to sleep.
When My macbook goes to sleep I get a "connection time-out occurred" when I try to connect to the internet. and I have to restart my mac and restart the router. The is always a BT hotspot page displayed on the screen.
I have a 2011 macbook pro. This happens on my son's as well. he has the same model. he recently got a new retina display macbook and there hasn't been any problems. this doesn't happen on our phones either.
-Thanks for any helpI don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
In addition to my own post, here are the correct link.
try to reset PRAM and SMC to refresh your macbook hardware behaviour:
http://docs.info.apple.com/article.html?artnum=2238\
http://docs.info.apple.com/article.html?artnum=303319
Good Luck -
Hi All,
I want to handle to Connection Time Out exception when displaying the BW Report in Portal. Please provide inputs.
Also, is it possible to handle some look and feel of the BW Report from Portal itself.
Regards
Nikhil BansalHi Nikhil,
Look at this link, this will be provide you solution
<b>Connection Timed Out in Web Reports>
if it helps you, please rewards points.
Regards,
Nisarg Patel -
Connection time out in server.xml
can u plz tell me what is connection time out in server.xml, how we can change it and what is the advanges or disadvantages if we change it.
Thanks in advancehi,
it sets or returns the number of seconds to wait for a connection to open, before canceling the attempt and generate an error.
If u want to Disable connection timeouts, set connectionTimeout value
to 0 in server.xml -
Connection time out issue with wep security
Does anyone know what is causing connection time out when connecting to WEP network.
Password is correct.
$ and x0 in front don't work.
A solution would be great.
ThanksHello freestyleadamski. Welcome to the Apple Discussions!
o The MacBooks back until late 2006 can handle 802.11n/a/b/g
o The late 2006 MacBooks will require the "n"-enabler to support the same.
o The mid-2006 MacBooks will only support 802.11b/g
o The iPod Touch will only support 802.11b/g
Which radio mode should I be using so I can connect my macbooks (I have one and my wife, hers is slightly older) and our ipod touch?
In order of most to least recommended: 802.11n (802.11b/g compatible), 802.11g only, 802.11b/g compatible, & 802.11b only. -
Connection time-out but then immediately after, no problem
For some reason, the first time I use pacman (after not having used it in a while), the connection times out, but when I Ctrl+C and then do the exact same thing, it starts working.
Any ideas why?
$ sudo pacman -S tmux
resolving dependencies...
looking for inter-conflicts...
Targets (2): libevent-2.0.19-1 tmux-1.6-2
Total Download Size: 0.44 MiB
Total Installed Size: 2.19 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
error: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from ftp.lysator.liu.se : Connection time-out
^Cerror: failed retrieving file 'libevent-2.0.19-1-i686.pkg.tar.xz' from mirrors.ustc.edu.cn : Connection time-out
Interrupt signal received
$ sudo pacman -S tmux
resolving dependencies...
looking for inter-conflicts...
Targets (2): libevent-2.0.19-1 tmux-1.6-2
Total Download Size: 0.44 MiB
Total Installed Size: 2.19 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
libevent-2.0.19-1-i686 296.9 KiB 724K/s 00:00 [#####################] 100%
:: Retrieving packages from community...
tmux-1.6-2-i686 152.2 KiB 1801K/s 00:00 [#####################] 100%
(2/2) checking package integrity [#####################] 100%
(2/2) loading package files [#####################] 100%
(2/2) checking for file conflicts [#####################] 100%
(2/2) checking available disk space [#####################] 100%
(1/2) installing libevent [#####################] 100%
Optional dependencies for libevent
python2: to use event_rpcgen.py
(2/2) installing tmux [#####################] 100%
Last edited by damd (2012-08-13 11:20:38)cfr wrote:Is this issue pacman-specific? Do you know that you definitely have a known-good connection when you're invoking pacman?
I'm using SSH to connect to the server where this problem is happening, indicating that the LAN connection works. Before invoking pacman I've tried pinging google.com, which works flawlessly.
The problem is still there, I just tried it.
EDIT: This actually happens with wget too:
$ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
--2012-08-12 21:11:32-- https://aur.archlinux.org/packages/pa/p … ery.tar.gz
Resolving aur.archlinux.org... ^C (took a very long time)
$ wget https://aur.archlinux.org/packages/pa/p … ery.tar.gz
--2012-08-12 21:11:43-- https://aur.archlinux.org/packages/pa/p … ery.tar.gz
Resolving aur.archlinux.org... 208.92.232.29 (works here)
Last edited by damd (2012-08-12 19:12:35) -
Connection time out what does this mean?
connection time out what does this mean?
Perhaps you could try this to resolve your issue:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings. -
Connection time out, connection time out
i've got a mac mini in my living room wich is hooked up to a modem and one wich is standing in my bedroom.
When i try to connect my bedroom mini by wifi it wil tell me: "connection time out" and i haven't got a clue on how to resolve this.
please help, thnx in advance!
i haven't got an external wifi transmitter if that might be of interestAre you trying to share the Internet connection from one Mac mini to the other? That is, the mini in the living room that is connected to the Internet modem by Ethernet to share this Internet connection via the mini's AirPort card to the mini in the bedroom ... correct?
If so, approximately how far away from each other are the minis and how many walls, ceilings, floors, etc. are between them? -
HT4528 network connection time out
Whenever i am trying to sync applications from latop to iphone i am getting the message. Network connection time out.
Not sure if this will help or not... but is the iPhone and your laptop on the same wireless network when you try this? Does that wireless network have a good connection?
If nothing else works... try hard-syncing (plugging in) your iPhone to your laptop, and then start up iTunes.
I hope this helps... let me know if it does/doesn't!
Maybe you are looking for
-
How can I get rid of the dark area on top one third of my iphone screen which spoils my background image? It seems this problem is caused by the software to increase the readibility of upper letters (clock battery etc.) It be nice to leave us the con
-
How can I connect one picture to another picture?
How can I connect three pictures?
-
Simultaneous Mail and iCal problems - iCal shows old to-dos
I was getting ready for my weekly backup, so I ran all the cleaning activities in OnyX. Then when I logged in after the restart, Quicksilver crashed on me 3 times in a row and acted as if I was installing it for the first time. I did not, however, ha
-
Pages: Special problem with duplex printing on hp310c
I used to produce and print double sided flyers with pages on my ipad4. My HP 310c printer is ready to print duplex. Everything worked fine until I loaded the IOS7 version of pages (Nov 13). Now there are problems. If I fold the flyer the second page
-
"Go Back One Page" doesn't work on first page visited from Home Page
When opening FF4.0, my homepage opens fine. Whether I manually type a webpage address, use a book mark from list or button bar, once that page opens, the "Go Back One Page" button is still gray and the only way to get back home is to click the "Home"