Connection timed out, Connection timed out

I get this message whenever I try to get reconnected to known wireless networks, please help.

i was updating my iphone and it just stopped, now says i have to restore to have phone load, it also just has a plug and the end of a usb showing on face of phone i also will loose all data pics, music if i restore what can i do to get it to connect and upload data to computer/itunes HELP

Similar Messages

FTPS receiver side - Connection problem:connection timed out: connect

Hi experts,
I must connect to an external server to send files with FTPS.
I have created receiver CC with connection security: FTPS for control and data connection
Command order: TLS, USER, PASS, PBSZ, PROT
Connect mode: per file transfer
port : 990 (given by third part)
data connection: passive (suggested by third part)
My problem is that communication channel raise a connection timed out error, see below for log.
I've already followed the steps suggested by this thread:
FTPS Transfer Failing with Connection Timeout
but no luck.
Thanks
Fabio Boni
2011-05-18 12:21:01 Success Connecting to FTP server "ftps.xxx.xxx.it"
2011-05-18 12:21:02 Success Write to FTP server "ftps.xxx.xxx.it", directory "/in", -> file "Delivery20110518-122102-155.xml"
2011-05-18 12:21:02 Success Transfer: "BIN" mode, size 1760 bytes, character encoding -
2011-05-18 12:21:23 Error Attempt to process file failed with java.net.ConnectException: Connection timed out: connect
2011-05-18 12:21:23 Error Exception caught by adapter framework: Connection timed out: connect
2011-05-18 12:21:23 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect
2011-05-18 12:21:23 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect.

As Fabio said, the file adapter log return this log:
2011-05-18 12:21:01 Success Connecting to FTP server "ftps.xxx.xxx.it"
2011-05-18 12:21:02 Success Write to FTP server "ftps.xxx.xxx.it", directory "/in", -> file "Delivery20110518-122102-155.xml"
2011-05-18 12:21:02 Success Transfer: "BIN" mode, size 1760 bytes, character encoding -
2011-05-18 12:21:23 Error Attempt to process file failed with java.net.ConnectException: Connection timed out: connect
Seem that FTP access into server is executed successfully and adapter write file, but raise timeout exception.

G6 UI Customization build problem - Connection timed out: connect

For anyone else who's having the same problem we're having:
When I run ANT on the ui customization folder, I get this error:
Buildfile: build.xml
BUILD FAILED
C:\plumtree_ui_source\portalui\6.0.x\test\build.xml:14: The following error occu
rred while executing this line:
Error reading project file C:\plumtree_ui_source\portalui\6.0.x\test\build_core.
xml: Connection timed out: connect
Total time: 21 seconds
We're running behind a proxy. ANT has to connect to the Java website to pull down it's DTD. So, the answer is to first run the following command to configure the proxy, replacing the proxy host, port, username, and password with yours:
set ANT_OPTS=-Xms128m -Xmx800m -DproxySet=true -DproxyHost=10.0.0.0 -DproxyPort=80 -DproxyUser=myUsername -DproxyPass=myPassword

Thanks for the post, it fixed my issue!

OpenMarket sms api gives "Connection timed out: connect"

Hello All,
I am new to web applications with sms services.
I am trying to send sms from my java application to mobile device. But I am getting below error.
Aug 25, 2010 10:55:58 AM com.eha.sms.ema.EMACMMessageSendProxy init
INFO: Move to send the receiver initialization.
Destination address = +**********
Source addres = +*****
Sending message to Simplewire...
REQUEST XML ==
<?xml version="1.0" ?>
<request version="3.0" protocol="wmp" type="submit">
     <user agent="Java/SMS/2.9.16"/>
     <account id="******************" password="***************"/>
     <option type="production"/>
     <source ton="0" address="+*****"/>
     <destination ton="0" address="+**********"/>
     <message udhi="false" text="Hello World!"/>
</request>
protocol: http
remote host: ******Some site given to us by open market people that opens on browser**********
remote port: 8080
remote file: /wmp
{main} [10:55:58.722] Conn: added module com.simplewire.http.RetryModule
{main} [10:55:58.725] Conn: added module com.simplewire.http.AuthorizationModule
{main} [10:55:58.726] Conn: added module com.simplewire.http.DefaultModule
{main} [10:55:58.747] Conn: Creating Socket: smsc-01.openmarket.com:8080
{main} [10:56:19.759] Conn: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at com.simplewire.http.HTTPConnection$_A.run(Unknown Source)
Message was not sent!
Error Code: 106
Error Description: A connection could not be established with the Simplewire network. Connection timed out: connect
Error Resolution:
The code I am using is as below.
private void config()
          Properties properties = new Properties();
          InputStream smscmReceiver = EMACMMessageSendProxy.class.getClassLoader().getResourceAsStream("sms.properties");
          try
               properties.load(smscmReceiver);
               System.out.println(properties.getProperty("SMS.SubscriberID").trim());
               System.out.println(properties.getProperty("SMS.Password").trim());
               System.out.println(properties.getProperty("SMS.DestinationAddress").trim());
               System.out.println(properties.getProperty("SMS.SourceAddress").trim());
               SMS sms = new SMS();
               // subscriber settings
               sms.setRemoteHost(" ******Some site given to us by open market people that opens on browser**********");
               sms.setDebugMode(true);
               sms.setRemotePort(8080);
               sms.setSubscriberID(properties.getProperty("SMS.SubscriberID").trim());
               sms.setSubscriberPassword(properties.getProperty("SMS.Password").trim());
               // Message Settings
               sms.setDestinationAddr(properties.getProperty("SMS.DestinationAddress").trim());          // recipient of message
               sms.setSourceAddr(properties.getProperty("SMS.SourceAddress").trim());               // originator of message
               sms.setMsgText("Hello World!");
               System.out.println("Sending message to Simplewire...");
               // submit message and check results
               if (sms.submit())
                    System.out.println("Message was sent!");
     System.out.println("Ticket ID: " + sms.getMsgTicketID());
               else
                    System.out.println("Message was not sent!");
                    System.out.println("Error Code: " + sms.getErrorCode());
                    System.out.println("Error Description: " + sms.getErrorDesc());
                    System.out.println("Error Resolution: " + sms.getErrorResolution() + "\n");
          } catch (IOException e)
          log.error("Load profile sms.properties failed to send Move.", e);
I am using windows 7 and the required info from the java code is picked up from a property file.
destination address is a "+" sign followed by cell number of client in US and I am in diff country.
source code I am using is "+" sign followed by a short code given by client.
I am also not aware what short codes are for.
I am also not sure whether I am passing correct parameters.
I just followed a demo code from the api's sample file. (open market api......swsms-2.9.16 is the jar used.).
would like to know If destination address can be my cell number.
The open market people have configured the demo short code for our SMS messaging account.
This feature will allow us to test our platform to send and receive SMS messages
while we are waiting for our dedicated short code.
Mobile Originated messages MUST start with our assigned keyword(s) to be routed to you.
We have a few keywords but don't know how to use them.
Please help!
Thanks in advance.
Edited by: Vish_1x1 on Aug 24, 2010 11:06 PM

I had a same problem.
It was definately URL and SOAP Action Problem.
Also, I didnt configure the Proxy too.
Please dont waste more time in looking inot other configs.
Just give a careful look at Target URL and SOAP Action, again and again.
Sweta , Please make this question Answerd , it will be useful for other users.
And Bahvesh Deserves good points..
Thanks ,
Deo.

Connection timed out: connect at com.sun.mail.imap.IMAPStore.protocolConne

Hi ,
Recently, my team need to work with javamail. Here I got a problem: when I run the application in my personal home network , it goes on very well. When I run the program in my company env, it gives error info:
Exception in thread "main" javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465;
nested exception is:
java.net.ConnectException: Connection timed out: connect
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1706)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:525)
at javax.mail.Service.connect(Service.java:313)
The resource is :
import java.security.Security;
import java.util.Date;
import java.util.Properties;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.AddressException;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
*Use Gmail
public class GmailSender {
public static void main(String[] args) throws AddressException, MessagingException {
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
final String SSL_FACTORY = "javax.net.ssl.SSLSocketFactory";
// Get a Properties object
Properties props = System.getProperties();
//Add proxy for GmailSender
//especially here, I am not sure whether the proxy really works. In home network, it needn't proxy to run successfully.
// props.setProperty("proxySet","true");
// props.setProperty("socksProxyHost","148.87.19.20"); // This IP address is our proxy server address
// props.setProperty("socksProxyPort","80");
props.setProperty("mail.smtp.host", "smtp.gmail.com");
props.setProperty("mail.smtp.socketFactory.class", SSL_FACTORY);
props.setProperty("mail.smtp.socketFactory.fallback", "false");
props.setProperty("mail.smtp.port", "465");
props.setProperty("mail.smtp.socketFactory.port", "465");
props.put("mail.smtp.auth", "true");
final String username = "XXX";
final String password = "XXX";
Session session = Session.getDefaultInstance(props, new Authenticator(){
protected PasswordAuthentication getPasswordAuthentication() {
return new PasswordAuthentication(username, password);
// -- Create a new message --
Message msg = new MimeMessage(session);
// -- Set the FROM and TO fields --
msg.setFrom(new InternetAddress(username + "@gmail.com"));
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse("[email protected]",false));
msg.setSubject("Hello");
msg.setText("How are you");
msg.setSentDate(new Date());
Transport.send(msg);
System.out.println("Message sent.");
Will you please help me to review my code and give me some suggestions ?

No point looking at the code. The error message says the code can't connect to the server you are trying to connect to, so presumably there's a firewall or something like that preventing the connection. Talk to your network people.

RMI on Debian: Connection Timed Out: connect

Hi
I have a Problem with my RMI Server program running under Debian.
When i start the server it lasts for about 3 minute until the Object is bound to the RMI-Registry.
I have a simple System.out.println("XXX bound"); statement after binding the registry.rebind(name, stub);
Well it seems to work because no exception is thrown and i can see the println.
But the big problem is, that it takes for about 3 minutes until this is done. when i try to connect to the server via the client,
i get a
"Connection refused to host: xxxxx; nested exception is:
java.netConnectException: Connection timed out: connect"
after a minute, the serverside doesn't make anything, no System.out statement is executed in the remote method.
it seems that RMI is very slow on my Server machine and i can't figure out why.
here are the properties set in the server program:
System.setProperty("java.rmi.server.codebase", "xxxxxx"); //works
     System.setProperty("java.rmi.server.hostname", "xxxx.ath.cx"); //perhaps the problem
     System.setProperty("java.security.policy", "/var/www/dod/xxxxx.policy"); // should be no problemmy client is startet via webstart from the same server an has the lookup code:
try {
               registry = LocateRegistry.getRegistry("xxxx.ath.cx"); //perhaps the problem
               idodsrmi = (XXXServerRMI) registry.lookup("xxxxxxx");
               usrh = idodsrmi.getUserHandle(args[0], args[1]);
          } catch (AccessException e) {
               JOptionPane.showMessageDialog(null, e.getMessage());
               e.printStackTrace();
          } catch (RemoteException e) {
               JOptionPane.showMessageDialog(null, e.getMessage());
               e.printStackTrace();
          } catch (NotBoundException e) {
               JOptionPane.showMessageDialog(null, e.getMessage());
               e.printStackTrace();
          } this code is executed without throwing an exception, but when i try to call methods on usrh i get the connection timeout...
i can't see where the problem is, "xxxx.ath.cx" is the domain name my network is available from outside the lan,
my router forwards port 80 and 1099 to my serverbox
any ideas about the timeout?

Yes that was it, i got the clou when i changed the hostname of my debian-box to xxx.ath.cx. after changing to that hostname i got an exception to google for.. ;-) But it's still strange to get no exception when the hostname of my debian-box differs from the dyndns name. it just lasts for about 3 minutes and seems to work...
Well now im back to an older problem, my server uses hibernate to communicate with a db and when i make 2 .jars (1 hibernate-util with all hibernate related jars and 1 for my project) instead of 1 big jar with all jars i get the exception "No Persistence provider for EntityManager named DOD", thats a strange behavior too because the persistence.xml is at the same place in my project .jar... :-/

Connection timed out: connect

Hi!
i am trying to read a webpage into a string but i am getting error
Exception in thread "main" java.net.ConnectException: Connection timed out: connectIs there any socket port related error.....ports below 1024 r blocked in our companies unix server.... if so please tell me the solution...
Bunty
Following is my code.
import java.io.*;
import java.net.URL;
import java.awt.*;
import java.net.*;
public class urlTest {
                public static void main(String args[]) throws Exception {
           try {
                     URL url = new URL ( "http://www.yahoo.com" ) ;
                  URLConnection urlConnection = url.openConnection ( ) ;
                  BufferedReader htmlPage = new BufferedReader ( new InputStreamReader ( url.openStream ( ) ) ) ;
               String line = "";
                  while ( ( line = htmlPage.readLine ( ) ) != null )   {
                              //do something with the html line
                          htmlPage.close ( ) ;
                         urlConnection = null;
                    } catch ( Exception e )   {
                         e.printStackTrace ( ) ;
}

You most likely need to connect through a proxy server. Figure out the proxy host, port and used protocol (probably http) and then build your URL like this:
URL url = new URL("http", "yourproxyhost", 80, "http://www.yahoo.com");Fill in the relevant information (80 is the proxy port in the above example, perhaps you need to fill in another port).
Hope that solves your problem.

[C4003] Connection timed out: connect

I have i problem when trying to connect to JMS resource through JMSConnection factory on a remote machine. I have standalone client with wich I can connect if a run it on the same machine that AppServer is running. When I try to connect from a remote machine I see SJSMQ JMS Resource Adapter starting... and than i get following error:
com.sun.messaging.jmq.jmsclient.ExceptionHandler throwConnectionException
WARNING: [C4003]: Error occurred on connection creation [machinename:7676]. - cause: java.net.ConnectException: Connection timed out: connect
There are no errors in server log.
I have set java options -Dorg.omg.CORBA.ORBInitialHost and -Dorg.omg.CORBA.ORBInitialPort when running standalone client.
I've also created connectionFactory in appServer on client machine that points to remote machine and have succesfully connected to JMS that way.
So why can't I connect directly to remote machine? Any suggestions?
Thnx.
Marko

No point looking at the code. The error message says the code can't connect to the server you are trying to connect to, so presumably there's a firewall or something like that preventing the connection. Talk to your network people.

30EA1 Dead UI on timed-out connection

This version still has 2.11's "dead UI" behavior on a closed- or timed-out connection to the Oracle database.
I contend that fixing this behavior is more important than any new feature work. It's bad to waste a person's time, and that's what this behavior does. I'd guess recovery from a timed-out connection I just had took seven minutes.
Heaven forbid I should have to make coffee... ;-)

What HWHC said.
Environment:
* Mac OS X 10.6.4.
* SSL VPN over my cable modem to our campus network
* Oracle 11R2 on SuSE
* Connections panel is not "pinned," that is, I summon it by clicking a tab to the left of SD's window.
There are two, maybe three bad UI behaviors related to connectivity:
* Dead UI (this thread): lost connection, time-out, lost network or VPN timed out. 2.11, 3.0EA1.
I simulated this scenario last night by:
- Authenticate to the DB.
- Open a package declaration.
- Leave SD untouched until this morning (required wait time is much less than overnight).
- At 6:36 this morning, close the editor window.
- Summon the Connections panel (which still had the connection's schema open).
- Click the connection name.
- The UI froze: the esc key did not dismiss the Connections panel, no clicks were accepted, clicks in SD's menu changed the cursor to the beachball.
- Do other work. At 6:44 I saw the connections panel finally close, and from then on I could work with it.
If you have time, you switch to another task; if you don't, you use OS X's Force Quit, like HWHC says, and potentially lose work. That's data loss.
Someone was so troubled by this behavior that s/he wrote a "keep alive" plugin. Obviously it's a risk to install a bit of code not vetted by Oracle, so I haven't tried the plugin. Clearly this isn't a rare phenomenon.
* Bonking SQL editor in 30EA1, maybe 2.11:
- Open connection
- Open a package
- Leave SD alone for maybe 10, 15 minutes.
- Then navigate the open package. Attempts to type produce a "bonk" sound -- on the Mac, meaning "No."
- Oddly, I can open other packages but still experience the bonk behavior.
* Smaller annoyance in 2.11, 30EA1: Connections panel schema tree and its context menu get out of sync about connection status. An idled connection name might not offer a Disconnect menu option until you click another connection, then click again the active connection to get the disconnect option.

Disconnecting listener connection to workstation, request timed out

<b>144820.P0251WLADC!WSL.6461.1.0: WSNAT_CAT:1175: WARN: Disconnecting listener connection to workstation, request timed out</b>
hello all,
i have been observing this error number of times these days.
catalogue messages say "This probably indicates that the number of workstation clients that need to join the application can not be supported by the existing configuration"
how do i define a client?
I want to know diffrence between remote clients & native clients.As far as i know remote clients are WorkStation clients but what are native clients?
thr is billing application (Singl.eview 4.02) residing above tuxedo 7.1 & by Work station clients i mean all remote clients logging into the front-end of the billing application.
i run following script:
echo 'pclt' | tmadmin -r 2>/dev/null | egrep -v '>|-------|tpsysadm|tmadmin|WSH|^$'|wc -l
& most of the times i get o/p greater than 40 (MAXWSCLIENTS)
basically,what is the diffrence between front-end clients and tuxedo clients/users?
this is what has been defined in my ubb...
MAXACCESSERS 4000
MAXSERVERS 1200
MAXWSCLIENTS 40
pls clarify the doubt.
thanks & regards
abhijeet

Hi Abhijit,
The message regarding time out is probably due to time limit defined for WSL in your UBBConfig file. Check whether in CLOPT parameter for WSL timeout value(with '-t' option) is defined or not? due to this timeout value, whenever any WS client will be in idle status more than the timelimit, will get disconnected with the warning message.
Native client is the client process which interact with Tuxedo services without using WSL, means that process should run on the same box. But a remote/WS client may reside on same as well as on remote box.
Regards
-Ashish

Connection on default ports timed out

I administer an xserve that up until 3 days ago was sending and receiving email fine. After a user went over quota I adjusted their quota to allow them to remove emails as they were unable to modify any email at all. In the process of adjusting their quota I have broken something and now get "Connection on default ports timed out" error.
I am able to send using webmail but unable to receive from an external source
I have posted my post configuration below and would appreciate any help.
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = localhost
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 26214400
mydestination = $myhostname,localhost.$mydomain,wcc.school.nz
mydomain = wcc.school.nz
mydomain_fallback = localhost
myhostname = mail.wcc.school.nz
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdenforcetls = no
smtpdpw_server_securityoptions = plain,login
smtpdrecipientrestrictions =
permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550

It's not surprising.
Your configuration includes:
inet_interfaces = localhost
This tells postfix to listen on localhost only. i.e. it won't listen on the network interfaces and accept mail from remote clients.
There may be other issues with the configuration, too, but that's the first one to fix.

[deployComposite] SEVERE: Connection to the server timed out error

Hi All
I am trying to deploy Data Model (Size 5 MB) to SOA Server MDS repository and currently experiencing this issue:
deploy:
[input] skipping input as property serverURL has already been set.
[input] skipping input as property sarLocation has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=./tmp/mds/DataModel_mds.zip
[deployComposite] created temp dir =C:\Users\HomeUser\AppData\Local\Temp\deploy_client_02c963b3-9ac7-44e9-b613-27fdba9e5d28
[deployComposite] Adding shared data file - C:\Users\HomeUser\AppData\Local\Temp\deploy_client_02c963b3-9ac7-44e9-b613-27fdba9e5d28\DataModel_mds.jar
[deployComposite] INFO: Creating HTTP connection to host:192.168.0.3, port:8001
[deployComposite] SEVERE: Connection to the server timed out. Please check the server log for problems or increase the timeout value.
There is nothing in the soa_server1 logs. What timeout value i need to increase here. Please Help. Thanks!!!

Hi,
My action is not taking more than 3 minutes, but still I am getting a java script alert saying "a connection to the server has failed.". I can give you once example where I am getting this alert, when I go down to the adf table results , and click on any row, most of the times the error is showing up.
I would like to share a screenshot of it, but not sure how to upload a screenshot here.

Connection to ClearDB is timing out on MediaWiki Instance.

Created a MediaWiki instance to gather requirements, and with only 3 to 4 users connected we are seeing intermittent database connection errors. After enabling logging, this is the error we are seeing:
DB connection error
Server: us-cdbr-azure-northcentral-a.cleardb.com, User: X....., Password: 62e..., error: :real_connect(): (HY000/2002): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection
failed because connected host has failed to respond.
Failed to connect to database 0 at us-cdbr-azure-northcentral-a.cleardb.com
We contacted ClearDB support, and they claim the connection is good.
Not being a PHP dev, is there a way to increase the timeout? Rather have a slow response then a failed response.
thanks

Hi Bill,
Could you give me the name of the ClearDB Instance size you have chosen? Also, you can find additional information from the ClearDB section of the Web App Support Portal (<a href="https://.scm.azurewebsites.net/Support">https://<site-name>.scm.azurewebsites.net/Support)
which might be helpful in diagnosing the issues you are experiencing.
Thanks,
Cory Fowler
Program Manager II
Azure App Service
Cory Fowler Windows Azure MVP http://blog.syntaxc4.net

FTP adapter time out connection

Hello,
I'm trying to send a file with a receiver ftp comunication channel and I obtain the following log in the runtime workbench monitor:
Time Stamp Status Description
2008-05-08 18:41:51 Success Message successfully received by messaging system. Profile: XI URL: http://gestsapxid:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2008-05-08 18:41:51 Success Using connection AFW. Trying to put the message into the receive queue.
2008-05-08 18:41:51 Success Message successfully put into the queue.
2008-05-08 18:41:51 Success The message was successfully retrieved from the receive queue.
2008-05-08 18:41:51 Success The message status set to DLNG.
2008-05-08 18:41:51 Success Delivering to channel: FILE_OCHOA_RECEIVER_FTP
2008-05-08 18:41:51 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2008-05-08 18:41:51 Success File adapter receiver channel FILE_OCHOA_RECEIVER_FTP: start processing: party " ", service "ESMAR_OCHOA"
2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
2008-05-08 18:42:12 Error Delivery of the message to the application using connection AFW failed, due to: Connection timed out: connect.
2008-05-08 18:42:12 Error Exception caught by adapter framework: Connection timed out: connect
2008-05-08 18:42:12 Success The asynchronous message was successfully scheduled to be delivered at Thu May 08 18:47:12 CEST 2008.
2008-05-08 18:42:12 Success The message status set to WAIT.
I have tested to put a file (with the same FTP parameters) from the promt of the xi server operating system and all works fine. can someone help me to find why the time out connection happens?.
Thank you very much
Alberto.

I have tested in the xi server: run->cmd->ping nnn.nnn.nnn.nnn and I don't reach the ftp server but if I test in the xi server: run->cmd->ftp nnn.nnn.nnn.nnn and introduce the user and password then I log in without problem and I can put the file in the remote directory.
If you see in the log above:
2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
the first 3 steps are ok. If the ftp was down or if credentials was wrong other error will be generated.
Thank you very much.
Alberto

Error - connection time out: connection

Hello colleagues,
I am implementing a scenario of HTTP-->SOAP sending an xml payload with Wfetch utility.
I get the following error in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection timed out: connect</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is it connected to the adapter framework definitions? Can someone help?
Thanks,
Oded

Are you sure the mentioned SOAP url can be reached from XI AFW box? Can you take remote control over XI box and try a
telnet 192.117.169.234 80
That should go to blank screen on succesful connection. Is it so?
Also, try to do a complete cpa cache refresh with this URL and authenticate with the XIAFUSER:
http://host:port/CPACache/refresh?mode=full
And finally, have a look in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283">troublshooting guide</a>, which might contain something useful (it's really well done).
Cheers,
Alexx

Soap Reciver Time out connection

hai,
iam doing idoc to soap. iam send the data from sap side this data is going xi server but problem is reciver side is connection time out. iam check the monitoring in sxmb_moni the status is block flag status is successful going to xi server and xiserver sending to receiver system the receiver is connection is time out iam providing the reciver url and user name and pwd.
plz help me any this is very urgent.

After checking in sxmb_adm even when i send the data iam getting the same error.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
plz help me out .

Connection timed out, Connection timed out

Similar Messages

Maybe you are looking for