Connection timeout error trying to connect to wireless network

Going nuts...
I have my Time Capsule plugged into an outlet that runs back to my switch (Netgear) which in turn goes into my modem (AT&T uverse).
(the switch runs out to about 6 ethernet outlets in my house)
Everything was working grand until I screwed something up, no idea what, of course!
I have set my Time Capsule set up...
In the AirPort Utility
AirPort tab
Wireless mode:create a wireless network
Connect using: Ethernet
Internet tab
Connect using: Ethernet
Connection sharing: Off (Bridge mode)
From these settings I can see the wireless network I have set up, but I can't connect to it (get a 'connection timeout' error when trying to connect to the wireless network using my laptop)
When I try to change to Conenction Sharing to: 'share a public IP address' or 'distribute a range of IP address', then I get other errors... (DHCP Beginning and DHCP Ending Address Errors).
Any advice would be great - thanks!

Bridge Mode is the correct setting for your Time Capsule.
To aid in troubleshooting, I suggest that you temporarily move the Time Capsule close to the Uverse router and connect directly to one of the Ethernet ports on that device. Test to see if your wireless is working.
If yes, then move the Time Capsule again and this time temporarily connect to the Ethernet switch to test that way.
Keep working your way outward, testing as you go. If the wireless works on the first test when you connect directly to the Uverse router, at some point, you will find the connection problem. It's almost always something simple, like an Ethernet cable that is not making a good connection with one of the Ethernet ports.

Similar Messages

WiFi Connection timeout error, but still connecting

Since upgrading to Lion I've been having a strange problem. When I connect to a new WiFi hotspot I've been getting an error message suggesting that I have failed to connect, but in reality I have been connected. This happened today at an Apple Store, an office, and when I returned home. It might be related to trying to connect right after waking the computer from sleep, but this never happened with Snow Leopard. Any ideas?

How far do you get in Network Diagnostics? Any difference if you disconnect all other wireless clients?
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.

I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.

I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.
Any suggestions

It is very tough to help you when you don't fill out your profile, this is needed to get an idea of what your system looks like. Please read the Profile Update for instructions. Once you post that info then we have a starting point to begin helping you.

MacBook Pro sees wireless networks but cannot join any. Connection timeout error

I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
Internet access via ethernet cable works just fine.

It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area.

Can't connect via Airport -- "connection timeout" error, instead

I've got a MacBook Pro here, which was successfully connected online via Airport, under OS X 10.4.11.
Then I upgraded to Leopard (10.5), and the machine would no longer connect automatically to the router.
OK, I tried manually configuring the wireless connection, but no luck. So, I brought in an old iBook G4 running the same OS (10.5), and successfully linked it to the router, wirelessly, via Airport.
Copying the procedure that worked with the iBook -- to the MBPro -- did not help. Still getting a "connection timeout" error message.
So I performed a fresh install of 10.5 -- and I even DLed the Software Updates, including two that were supposed to improve Airport functionality -- and tried again. No luck.
Any suggestions?
TIA.

John,
I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
2. Click Apply and quit System Preferences.
3. Put the computer to sleep.
4. Wake the computer.
5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
6. Click Apply and Quit the Network Preferences.
7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
8. Verify connectivity
9. Put the computer to sleep.
10. Wake the computer.
11. Verify connectivity
HTH

Why do i keep getting the "internet connection timeout" error message?

i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

"Error" Trying to connect to.......

"Error" trying to connect to Infinitum9342
This message appears since i installed the update of airport for my Macbook C2D when trying to connect to the internet. (my litlte internet box)
I dont know how to name that thing in english, so i will just describe it, is a litle box, where i can connect ethernet cables or where i can connect wifi devices (such as my mac) rith now i just plug a ethernet cable to my macbook so i can get to the internet, but i loved using wi-fi, it just worked maravously for the past months in this mac, but now with the new update is all gone...and i dont know what to do!!!, the problem will be the next week
because i dont know if my computer will connect on other wifi connections (such as the one that is in my school, or work, or public places) and i need to use it for work and stuff.... and i cannot take a thernet cable everywhere, and i dont think there are public places to just connect a ethernet cable.
SO has anyone found a soultion for this kind of error? before the problem i used the ten digits (WAP) password of my "litle internet box" to connect but it dosnt works anymore.
Or can i just go back to the previous update of airport? or what can i do???
HELLLPPPPPPP!!!!!!!!!
Thanks a lot

well, WEP requires either a 5 or 13 character ASCII-password, or a 10 or 26 character hexadecimal password. WPA and WPA2 can take just about any password.
You could temporarily try disabling all encryption just to see if it works. Then hit the manual for your wireless router and see if you can get wpa2,wpa or wep working.
Good luck,
Martin

Connection timeout error in web report(portal)

Hi Experts,
Points to note about the 500 connection timeout error
1. Error persists only in portal. query/ report works fine in RSRT and Bex Analyser.
2.As per previous discussions tried implementing SAP notes to change ICM parameter for max of 10 minutes.
However, it is said by Basis team that they can change parameter only if all the report gives the same error.
Since all the report works fine they are nt ready to change the parameter.
4. Error: Time exceeds 600seconds
5.This issue arised only after upgrading the system to 7.3. post - upgrade. this report was working fine before.
6. Even in the portal, report works fine when we use ABAP web link.
Please share your suggestions.

In the trace file there is a error message for this report "Could not find a command, masscommand or group command with alias <new task>. It is defined in group . <TaskCollectionGroup>. pls any one help me. This is for 7.31 NW portal

Connection Timeout error message - HELP!

Hi,
I am so fed up with my internet connection....so here is my story....
I live above a shop in a rented flat which is owned by the shop owner, he kindly gave me the password for his router so I could use his internet free of charge.
This has worked fine with 3 different connections he has had since I have lived there and was working with the current one up until about a week ago.....it all of a sudden went off, however it was still showing up as an available network in my networks list, but when I try to connect to it using the password it brings up the 'connection timeout' error message.
I thought that this was something to do with his router so I brought my friends 3 Huawei E585 wireless internet device round to try that, but the same message appears, HOWEVER my iPhone 4 connects to this perfectly fine with a full signal strength.
THEN....my Dad took my Macbook and the 3 Huawei E585 device over to his house and my Macbook connected to it straight away??? ....... is there anything in the building that could affect the connection?? - as it seems to be my flat for some reason all of a sudden!? ..... my Dad has suggested it may be some sort of electrical interference if anything new has been installed recently?
Any help would be GREATLY appreciated as I'm SOOOOOO fed up of not having internet!!
Thanks

John,
I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
2. Click Apply and quit System Preferences.
3. Put the computer to sleep.
4. Wake the computer.
5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
6. Click Apply and Quit the Network Preferences.
7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
8. Verify connectivity
9. Put the computer to sleep.
10. Wake the computer.
11. Verify connectivity
HTH

When connecting to wifi, I get a "Connection timeout" error message.

I'm trying to connect to a WEP password wifi signal. I have the password, but when connecting, I'm getting a connection timeout error message. Please help?

I'm having the exact same problem. Yesterday it was fine, but today, I get connection timeout error message. Help?

HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?

What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method.

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

Webservice Connection Timeout Error in Sun Java System Application server

I have a java code to connect to Ebay Shopping Webservice that uses the client stub generated through Axis. The code works fine when I run it from the main method of a stand alone Java application. Which means there is no issue with the Proxy settings or any other network setting that could block the webservice from my system. However when I use the same code inside a JSF based Web Application, a connection timeout error comes up. The Web application is deployed on the Sun Java System Application server. The stacktrace of the exception is
java.net.ConnectException: Connection timed out: no further information
     at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
     at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:527)
     at com.sun.enterprise.server.ss.provider.ASClientSocketImpl.connect(ASClientSocketImpl.java:206)
     at java.net.Socket.connect(Socket.java:520)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
     at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:125)
     at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
     at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
     at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
     at org.apache.axis.client.Call.invoke(Call.java:2767)
     at org.apache.axis.client.Call.invoke(Call.java:2443)
     at org.apache.axis.client.Call.invoke(Call.java:2366)
     at org.apache.axis.client.Call.invoke(Call.java:1812)
     at com.ebay.api.soap.ShoppingBindingStub.findProducts(ShoppingBindingStub.java:1217)
     at com.shopping.ebay.EbayServiceUtility.performEBaySearch(EbayServiceUtility.java:66)
     at searchProduct.SearchProductBean.search(SearchProductBean.java:98)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at javax.faces.component.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:77)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:96)
     at javax.faces.component.UICommand.broadcast(UICommand.java:383)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:450)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:759)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:97)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:113)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
     at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
     at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
The JDK version on my machine is 1.5.0_14. Can somebody point me as where I should be looking for errors?

You need to delete all the files under the 'generated' directory to force the server to recompile them after the JDK upgrade. Also check in domain.xml and make sure the JVM parameter is pointing to the JDK that you have installed. It is also worthwhile to check asenv.conf to see which JDK that file is pointing to as well.

Iphone 5 Screen is Frozen Connection Timeout Error Connection to this app has timed out

I upgraded to IOS 7 just a few hours before my Iphone 5 screen froze and I cannot make changes - I have a Connection Timeout Error with Connection to this app has timed out. With Ok in blue. The screen doesn't respond, I can turn off the phone, tap OK or do anthing. Any advice on how I can reset or fix?

Check for any anti-virus or anti-spyware software you might have. Temporarily disable that to continue. Normally this is what will cause a timeout. I assume you have a good Internet connection?

I am getting CONNECTION TIMEOUT error in my macbook(10.7.4).plzzz help me

i am getting CONNECTION TIMEOUT error in my macbook(10.7.4).plzzz help me

Thank you very much, i guess it will be the remote servers.
Then i got this critical error on my local server
Automatic mail message send from usa12 for SID USA on Fri Dec 15 15:00:01 EST 2006
DONOT REPLY FOR THIS MESSAGE.....
Please check the follwing files ( will exist if there was an error )
/u01/app/oracle/admin/usa/bdump/alert_usa.log.121506.1500 ......
/u01/app/oracle/product/8.1.7/network/log/listener.log.121506.1500 .....
ORA-00600: internal error code, arguments: [17182], [27793076],
I know i need to contact oracle , when i went to Metalink ,i needed to run their RDA it is like diagnostic report script and include it before u send to them.
I needed some permissions from my Senior so i will do it on monday.
do you have any suggestions????

Connection timeout error trying to connect to wireless network

Similar Messages

Maybe you are looking for