Connection to 3rd party server

Hi,
it's me again ;-)
After few tests with my S2S conection between a BM38SP5 and a bintec
router it seems that the BM cannot establish a connection to the bintec.
From the bintec side it is allways possible to establish a connection to
the BM.
If the BM make the initial call to the bintec I get the following error
messages in the IKE log:
26.11.2007 11.58.16 Invalid SPI SIZE in IKE MAIN MODE SA 8
26.11.2007 11.58.16 Processed SA-PAYLOAD unsuccessful - No IKE proposal
chosen, dst=<public IP bintec>
26.11.2007 11.58.16 Failed to create IKE-SA - No IKE proposal chosen , dst
= <public IP bintec>
Any ideas?
Chris

Craig Johnson wrote:
> In article <HYy3j.2630$[email protected]>, Chris wrote:
>> In the last few days I spent so much time to solve the problems I have.
>> Now there is no time to test further configurations and I bought a second
>> bintec router :-(
>>
> Sorry to hear that. I was hoping you might try setting DES on the remote
> bintec to see if that helped.
I tried this but then I got a lot of PAYLOAD LENGTH errors
I tried 3des/sha, des/sha, 3des/md5, des/md5 on both sites without success.
I have configured 3des/sha on both sites but the BM tells me every time:
mine is des/sha yours is 3des/sha. If the phase2 comes up from the BM site
we have 3des on both sites.
After the first installation I had success with 3des/sha. But I had
problems with the 3rd party rules (see my other posts). I played a little
with the BM settings (there are only a few...) then I got the first time
the proposal mismatch error. After a reboot everything was fine again
(except for the rules). Abrupt I had my proposal mismath errors again, but
from this point the error no longer disappears.
Chris

Similar Messages

Which 3rd party server should I use to host my labview VI from my PC

I have developed a Labview application, that I want to host from my PC. So that I can access it from other PC thorough internet.
Now It can be accessed from the connect "remote panel" option in OPERATE tab.
But I cant give a labview to my client so I want to access it through browser.
Using web publish tool I can access it on LAN through web browser.
But now I want to host that HTML page on internet.
so can you folks please help with the third party server suggestion that can host remote panel.
Thank you.

If you are wanting to display your front panels the answer is easy: There are no 3rd party servers that can display a dynamic LV front panel. What you will have to do is a conventional Web application where your LV code sends data to the web user interface using HTTP client calls to "Get" and "Post" methods.
The client-side will be orchestrated through JavaScript and some sort of messaging scheme you work out.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Trying to create a linked server to a remote 3rd party server using an AD group

I am the DBA at our organization so I have full authority to all of our local SQL Server databases but we have data in a remote 3rd party SQL Server database that is only read-only. The 3rd party has granted the read only privileges to one of our AD
groups - let's call it mydomain\adgroup1. I would like to create a linked server from one of our local SQL Servers to the remote database. I'm not sure how to do this.
I have set the AD group up as a login and a user in my local database. When I try to create the link, I used the mydomain\adgroup1 as the local login and, since the same credentials exist in the remote server, I checked the impersonate box and click
OK but I get "mydomain\adgroup1 is not a valid login or you do not have permission". Is it possible to create a linked server using an AD group? As of now, we only have the AD group permissions in the remote database. We could probably
request a single SQL Server account to be created on the remote side and we could create the same on our side, but we are trying to keep things as simple and transparent as possible (and we would really like to move more toward AD security and away
from individual users in the db).
Can anyone give me advice on how to get these two SQL Servers linked?

From your description, you likely want to implement Windows authentication for linked server, which requires to implement Kerberos constrained delegation.
I would recommend the following link to get started:
How to Implement Kerberos Constrained Delegation with SQL Server 2008 (https://msdn.microsoft.com/en-us/library/ee191523%28SQL.100%29.aspx?f=255&MSPPError=-2147217396
-Raul Garcia
SQL Server Security
This posting is provided "AS IS" with no warranties, and confers no rights.

3rd party server specs-based

Hi All
I’m looking at the requirements for 3rd party servers specs based, the below link shows support ESXi version for CUCM, however it doesn’t mention 9.1(x) for CUCM at all?
Is it likely that Cisco just haven’t updated the doc yet?
http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements

Yes, it is definitely supported, sometimes these docs are little behind :-)
Chris

Creating website with 3rd party server using blogspot or wordpress's domain name?

Hi all!
I just wonder...
I am now offered a free hosting service and I want to create my personal site with iWeb.
Questions come:
I don't really wish to buy a domain since the free service only last for half a year and I just want to try out blogging...
Is it possible for me to use create a iWeb made site using blogspot or wordpress domain and 3rd party hosting service?
Thanks in advance. Coz i really have no experience on this

The short answer is no. WordPress and Blogspot are two totally different things and are blogging systems and you can use these for free, but what you do is create a username and your blog is then pubished to WordPress servers etc., so your blog url is then http://username.wordpress.com.
If you want to create a site with iWeb and avail yourself of free hosting and upload there, then you'll need to register a domain name.
Wordpress, iWeb and Blogspot are totally different and the only way in which you can use both is to create your site in iWeb and then upload to the free hosting and just create a link from your iWeb site to your blog created with either WordPress or Blogspot.

New MacBook attempting to connect to 3rd party wireless n router

I was wondering if anyone might have a few suggestions for me getting a MacBook 2.16 GHz running Mac OS X 10.5.1 connected to a third-party 802.11n wireless access point.
The router is a cheap AirLink 101 N router. I have no problems when the router is set to mixed g/b. I am
The issues start to arise when I start introducing n protocols. If I set the router to mixed g/b/n, I can connect and the network utility will show n speed, but I start having wireless network deafness. Seems connection is lost at times for a few minutes and then comes back. The speed of my network applications such as browsing also seems to slow down. Takes images longer to load. If I set the router to n only, I can never connect. I have tried disabling wireless security and that does not help. I have also tried all other security settings. I just can never connect. I haven't played with the other settings. I have a new iMac that when the router is set to n only will not connect either.
If anyone has suggestions, I would love to try them. I am seriously considering purchasing the AirPort Extreme N, but I don't like to give up on something when I am having problems.
Thanks,

I'm using Netgear Rangemax DG834 which works great for a Macbook and a PC. Good range in a big house with thick walls and well into the garden. Setup and maintenance is simple.
Having some trouble getting the Macbook to hook up to the network automatically on startup, but that's a Mac not a router problem.
If you want to go for wireless printing then I'd use all Apple stuff as it seems easier to hang together - I've tried a couple of wireless printer servers which were expensive and generally useless.
Cheers

IWeb generated RSS not working on 3rd party server regardless of efforts

Hi,
I have been reading various posts about how one has to upload both the folder and index.html file generated by iWeb, when one publishes an iWeb created website to a folder, and how it's important to place the domain URL into the line / space provided in the "Publish to a folder" window, and I believe I've done all that correctly without breaking any pathways.
However, it seems my web hosting service may be incompatible, when it comes to the RSS feeds, and I was hoping someone might be able to shed some light on this.
My server's structure is as follows when I FTP into it:
IP address>webroot>htdocs>website
My web hoster says the htdocs folder is the same as my domain name, www.dhdtv.ca
If I upload just the files from my published folder, dhdtv.ca, into my htdocs folder, the entire website displays & functions properly, with the exception of the pathways from the Subscribe buttons to the RSS feeds being broken.
Alternatively, if I upload the published folder, dhdtv.ca, along with the seperate index.html file, and place both in the htdocs folder, my website does not display.
Nor does it display if I take the published dhdtv.ca folder and accompanying index.html file out of the htdocs folder and place them in webroot, which is one level up.
My hosting company insists that I place my website in htdocs.
I've tried various combinations and the only thing that works is having all the files and folders from inside my published folder, dhdtv.ca, removed from the dhdtv.ca folder and placed directly into the htdocs folder.
Of course, no RSS feeds will work because of the broken pathways.
Given the above, can anyone tell me if my server configuration is compatible or not with the manner in which iWeb creates its RSS pathways and needs to be placed onto a server?
Or does anyone have a solution for this kind of configuration? My RSS feeds are video podcasts.
Thank you for your help
David
iMac 24" 2.33 Ghz, 3 GB Ram, 500 GB HDD Mac OS X (10.4.9)
iMac 24" 2.33 Ghz, 3 GB Ram, 500 GB HDD Mac OS X (10.4.9)

Alternatively, if I upload the published folder,
dhdtv.ca, along with the seperate index.html file,
and place both in the htdocs folder, my website does
not display.
This is the right way to do it, and it should display correctly. The problem could be because you have named your first page Index. This conflicts with index.html files which iWeb produces. I suggest to change the name of your first page to Welcome or Home and republish and try reuploading the dhdtv.ca folder plus the separate index.html file again. Do put them in htdocs.
Also you might want to change the name of your site inside iWeb to something short and simple like A or 1 before you republish.

New MacPro Connection to 3rd Party Displays

When connecting a new MP to a Dell monitor that supports HDMI, is there any reason you wouldn't simply use HDMI to HDMI? I see lot's of dicussions around web for mDP?
Thx
Paul

It depends upon how many monitors you are using
Mac Pro (Late 2013): Using multiple displays
You can easily use two HDMI monitors, one direct to the HDMI output on the MP and the other via mDP to HDMI adopter. For more it becomes harder

Trouble Publishing to 3rd party server with FTP

I am publishing to a folder then trying to upload that folder via FTP to my web site. My domain is from register and is hosted by easyasphosting.com... anyway, I copy everything to the wwwroot directory and get the error "The system cannot find the file specified."
Does anyone know how to fix this? Applecar just wants me to use my .mac account, which is fine, but I am paying for my domain! Thanks!

The fellow who gave me the server information also provided the following:
Is "Home.html" supposed to be your "home" page? If so, it should be named
"index.html" (all lower case). That is necessary so it is displayed when
someone goes to www.arlington.5m2lions.org and is the only page that has to
have a specific name and be in a specific place.
I subsequently changed my home page to index.html
I am now using Cyberduck now instead of Fetch. I deleted all files from the server and got this message:
FTP Error: Listing directory failed
/Arlington/Arlington
/Arlington/Arlington: No such file or directory.
Transcript:
NOOP
200 NOOP command successful.
CWD /Arlington/Arlington
550 /Arlington/Arlington: No such file or directory
NOOP
I subsequently uploaded my site again, apparently successfully since there were no error messages. Still will not appear. I will not attempt to touch the site again. Any assistance you can give me would be greatly appreciated. Corrected URL: www.arlington.5m2lions.org

Css and images not working on 3rd party server

Hello,
I have read the previous posts on this subject, but found no resolution.
I can confirm that the CSS and images were uploaded to Media Temple.
The permissions are set to "read"
I didn't change any of the file structures. uploaded as it was output by Muse.
Any new thoughts?
Thanks a bunch.
-keith.

I'm back.
Okay Zak thanks...
what browser?
on Safari the html shows up but no styling and the image frames show up but empty.
On fox same thing except no image boxes even.
I have a support request in with MT so I will see what they have to say.
Thanks a bunch and I promise to update any info I gather from them.
-Keith.

Connecting 3rd Party via Saprouter

Hi experts,
is it possible to connect a 3rd party via saprouter to our sap-systems?
Or is it just possible to connect SAP to the systems?
I already found one entry in SCN, however there was also no solution provided.
Kind regards

Hi Christian,
To connect your SAP system a 3rd Party needs SAP GUI setup at their end & you can provide the sap router string to connect your system via SAP GUI.
For security purposes you can configure sap router string with password option(authentication to access SAP system),so that after confirming job/consultancy by 3rd party you just need to change the password under router string only in regards no one can access your SAP system/network.
Hope this will help you.
Thanks,

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

3rd Party Interface

In our portal application i have one JSP page which has a File Upload functionality when the user hits a button in this page it opens an ASP Application(3rd party) in a new browser,so that the user is allowed to do multiple file attachment,this ASP application uses a File Server
at their end to maintain all the files attached to a particular Account,
Now in the portal side we have the bussiness requirment to download those uploaded files,Once user finishes the upload process this ASP application has a COM Object which sends an information to the Web Service at their side,So i was wondering how we can talk to this
Web Service from our side, So that we can pull the attached file information to our Database,
Any ideas about the approach is appreciated

As far as my understanding goes you have two choices.
1) Change the web service so that it can send some information to the portal application which in turn will save the information.
2) Write some kind of a batch process which will be scheduled to run ar periodic intervals. This batch job can compare the repository on the portal server with the repository on the 3rd party server and then compile this info and save it.
Let me know about your thoughts.
Regards,
Sudipto

IPayment with 3rd Party payment system

Hi All,
I have to configure iPayment with the third party payment system. the 3rd party talks with the Paymentech for credit card processing.
Here in this case,
1. 3rd party server is providing web services to talk with them
2. 3rd party server is working fine with the Paymentech
Issues
1. As per my understanding, I have to use Gateway model overhere. Correct me if I am worng?
2. Do I need to create any configuration servlet to talk with 3rd party server or is there any other way?
3. At which point I should call the web services provided by 3rd party?
4. How to create request as per the web service requirements and how to solve the response provided by web services?
Thanks in advance

Hi,
If your third party system talks with Payment Tech, Is it possible for you to confiure payment Tech directly with iPayment. As you know that oracle provides all the necessary confguration and servelt. Its pretty striagt forward and simple.
Find out whether you can use payment tech directly, that should solve most of your issues. If you need more information, let me know
Thanks,
RK
925 998 1494
Independent Techno Func Consultant

Connect to server using VPN and router, then 3rd party software hangs

I connect to my employer server using *Apani Contivity VPN* software to get email, accessing the internet with FireFox and any of the following devices *NetGear RP614v3, Linksys BEFSR41* routers, as well as a *Belkin F5D5131-5* switch. I can connect to the internet and log onto the company server. Then I spuraticly, but persistently, have *software hangs when I try to open the software or execute a save when using: Text Edit, MS Entourage, Quark, Adobe Photoshop and Bridge*. I use one of 2 Macs in a company of PCs and the other Mac user does not have these problems. Help.

Hi, and a warm welcome to the forums!
Done these two lately?
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
Reboot needed if many Permissions are fixed, and possibly reapply latest Combo Update also.

Connection to 3rd party server

Similar Messages

Maybe you are looking for