Connection to a 10g failed. Can't see the window content on the client.HELP

Dear Sir or Madame
it seems to me that here are the experts in Oracle's 10g in connection with Mac's.
I've got the following problem:
Our firm has a new 10g Release2 (10.1.2.02) server, based on windows technology.
If I'm logging on with a Win-PC (via VPN->server-address) the Oracle jinit-installer runs and installs some files. So far so good.
When I'm logging on with my G5 (OS X 10.4.2) no installer runs. Is the jinit-package included in OS X ? If yes than there is an other problem.
I type in my username and pw. The new window with the database-front is opening. But the only things I can see are some buttons without symbols or letters in it, the startup-window of the database normally contains some text, but there is no text.
How can i resolve the problem to see the content of the windows?
PLEASE ANSWER TO: Sebastian.Engler @t-online.de
Regards
Sebastian

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Similar Messages

Itunes says my ipod is synched but the screen on the ipod is just white. can't see the menu - help!

itunes says my ipod is synched but all I get on the ipod itself is a blank white screen. i can't get to the menu. Help!

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I transfer photo from my iPhone 4S to my pc . Each time I connected to my pc I can not see those pictures let alone burn them into cd

How can I transfer photo from my iPhone 4S to my pc? . Each time I connected to my pc I can not see those pictures let alone burn them into cd

importing pics http://support.apple.com/kb/HT4083

Itunes can't see the Airport Express that I'm connecting to... Wierd

I have my AE set up as a WAP on an ethernet system. I have iTunes over ethernet selected, but now my wireless box can't see the AE even though I'm sending this note over the AE. Does selecting iTunes over ethernet disable the iTunes over wireless?
The AE is connected to a router, so it is not distributing IP addresses.
I guess that I should also mention that it's preventing me from seeing other machines on the network and sharing my library.
Help??

Unless you've explicitly disabled "Distribute IP addresses" using Airport Admin Utility, your Express is set up as a router and is distributing IP addresses, which is consistent with the fact that you can't see the other machines.

I can not see the PC I'm connected to over VPN in the MY Network tab.

Hi,
I have set up my incoming connection for my VPN
on a Windows 8.1 PC. I can then remotely log in with my Windows 7 laptop. The laptop establishes a connection and says that I have "ipv4 internet access."
The problem I'm having is that I can’t find the PC in my network. What am I missing? Is Windows 7 not compatible with Windows 8.1 over
a VPN? I have turned off my Norton's Firewall for a short period of time but this did not change anything. I have altered the IP range allocation for the incoming connection and this has helped to establish a stable connection.
Any ideas on why I can not see the PC I'm connected to, in the (MY
Network) tab, would be much appreciated. Thanks

Hi Steve,
The main issue is the Windows 8.1 machine is not listed in the Windows 7 machine via VPN ,right ?
Please check the following settings in the network and sharing center:
1.Check these settings in the Advanced sharing settings
“Turn on network discovery” and “turn on file and print sharing”
2.Ping the destination machine both with the IP address and the UNC to have a check .
Best regards

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

Do you see anything on the TV?
If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
~Lyssa

Connected a usb HD to the new airport extreme 802.11ac; how can I see the HD on my iPad?

I just purchased and set up the 802.11ac airport extreme. I have connected an usb HD; I can see it from my iMac and my MacAir laptop. Can I see the connected HD from my iPad air 2?

You can, if you install an App like FileBrowser on the iPad. Info below:
Stratospherix - FileBrowser - Overview

Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.com

Hi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support

TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB. How can I get my computer to recognize my ipod

I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB. How can I get my computer to recognize my ipod

iPod not recognized in 'My Computer' and in iTunes for Windows

Jambox had no problem to connect with iPhone 4 S but my new iphone 6 can not see the jambox. Any solution known?

I used my jambox with the iPhone4S via bluetooth without problems. Now i changed to the new iPhone 6 and the new phone can not see the jambox. Is that known and what solution is available?

Hey rjdit,
Thanks for the question. After reviewing your post, it sounds like you are having trouble connecting to 3rd party devices. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Bluetooth connections
iOS: Third-party Bluetooth accessories
Thanks for using Apple Support Communities.
Have a nice day,
Mario

MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

Problems with Ipad and Canon printer PIxma Mg6250.
MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

You need to update the printer's firmware to 2.0.
Go to http://www.canon.ie/Support/Consumer_Products/products/Fax__Multifunctionals/Ink Jet/PIXMA_MG_series/PIXMA_MG6250.aspx?type=download&page=1
It is really hard to find what you need but it is at canon Ireland.

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality. What am I doing wrong?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

Connection to a 10g failed. Can't see the window content on the client.HELP

Similar Messages

Maybe you are looking for