Connection to AD Share not working past 1st level

10.10.3 client running on a network with a 2008 AD Server. setup 3 computers. 2 work fine and 1 of those is a laptop with a mobile account. The network AD users log into the "other" account and can access the server at the 1st level and sub folders without issue. On the last laptop the setup was the same however the AD user logs in and can only access the same server folder at 1st level. Sub folders are not visible. So I setup a new test user and discovered that the test user can't access the Subfolders either. So it seems to be local to the mac even though they are AD network accounts. Then I setup another local admin account and logged into that and then logged into the server using the ADnetwork account using the DNS address and I could see the 1st level folders but not the subfolders. However connecting to the server share via the IP/share allows viewing of the subfolders. So it would seem that it is a dns issue however on the other computers they all (PC and MAC) access the domainname/Sharepoint with issue. If anybody can shed any light on how I can access the subfolders using the full dns string as apposed to the ip I would be greatful. Again the other computers can access the server via the domainservername/share point.
Thank you.

Similar Messages

USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0

Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.

Hi,
I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though. Toggling the wifi setting clears
the issue temporarily but it occurs again. Running iOS 8.3 now. This was the case on iOS 8.1 and 8.2 as well.
I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
My router is an EA9200 router with 2.4 Ghz and 5 Ghz. It is configured with all bands with the same name.
All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
My thought is that iphone 6 cannot handle well the moving around between bands.
Any thoughts or suggestions would be greatly appreciated.
Thanks,
David

Have you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on? This seems to solve a lot of problems.

Home share not working on iPad but is working on iPhone

Home share not working on iPad but is working on iPhone

Have you signed in at Settings > Music with same Apple ID and password as you used in iTunes and on your iPhone to enable Home Sharing?

Display form function not working at HRADMIN level.

Hi ,
I have got a problem with an Adobe interactive form at HRADMIN level. i could run the perform personnel Actions(connecting to R/3), Email functions from the Action Box at HRADMIN . when i try for the Display form , the page is refreshing it self and not getting displayed .
needs some help.
Rgds,
Venkat

Thanks for your reply.
I have set the rendered property to ${oa.viewobjectname.columnname}
which is same as u mentioned I guess. It is working based on the first row fetched but not based on each rows value.
As per Ramkumar in the below thread , SPEL does not work at row level is it TRUE can anypne confirm?
Re: Bound Values
I have been waiting to get someresponse from yesterday.
Anyway, as My plan was to use the logic to build review page ( to show Blue dot if old value is not equals to new value) , I have planned to replace SPEL with oracle SQL logic I wrote a sql which returns something like this, I could not find any better alternates ( wrost one was to create 7 VO's (bcaz i have 7 columns to disp) and apply SPEL there)
Select 'Empno' column, AEmpno Current,Bempno Proposed,decode( a.empno,b.empno,'','*') from xxx_v
union
Select 'Ename',Aename,Bename,decode(aename,bename,'','*') from xxx_v
* indicates Changed data.

SPEL Review Page - not working at row level

I have searched the forum for "review page" and "SPEL" try to find solutions and tryed the techniques, but still not working.
This is what I am trying to do Display Employee details ( empno,sal,comm,deptno) I wanted to display edit icon only when deptno=10 otherwise not.as mentioned in one of the threads i have added a column decode(deptno,10,1,0) DispEdit and set the rendered property of that edit icon/item. Wrote the code necessary to return TRUE or FALSE,
I think its setting rendered property based on the first record, not changing based on each record.
currently based on the first record and how I put the logic its 1. Displays the column/edit icon 2. Does not display the column.so it this statement right?
Please help.
I found 2 forums that said it worked
1. same as above
Problem Using SPEL
2. in the second thread uses row.setAttributeValue/populate...
SPEL
basically I am trying to create a review page with change indicator image ( I have sql that has select old_date,new_date, changes_YN columns).

Thanks for your reply.
I have set the rendered property to ${oa.viewobjectname.columnname}
which is same as u mentioned I guess. It is working based on the first row fetched but not based on each rows value.
As per Ramkumar in the below thread , SPEL does not work at row level is it TRUE can anypne confirm?
Re: Bound Values
I have been waiting to get someresponse from yesterday.
Anyway, as My plan was to use the logic to build review page ( to show Blue dot if old value is not equals to new value) , I have planned to replace SPEL with oracle SQL logic I wrote a sql which returns something like this, I could not find any better alternates ( wrost one was to create 7 VO's (bcaz i have 7 columns to disp) and apply SPEL there)
Select 'Empno' column, AEmpno Current,Bempno Proposed,decode( a.empno,b.empno,'','*') from xxx_v
union
Select 'Ename',Aename,Bename,decode(aename,bename,'','*') from xxx_v
* indicates Changed data.

3.4: keyword auto-completion not working for multiple levels

Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC).
Example:
I enter in the "Click here to add keywords" field:
"He" then LR tries to complete the keyword by showing keywords starting with "He". Fine.
But this is a keyword which does not exist so far, so I enter "Heldenplatz > W" because I want to have sorted it under Wien. If I'm not mistaken, LR 3.3 showed after entering the "W" a list of existing keywords starting with W (auto-completion for the one level higher tag). This is not the case anymore. I have to enter "Heldenplatz > Wien" completely, which makes it slow and error-prone.
Am I mistaken or can you reproduce it?
Cheers

GaryRowe wrote:
How can it be, after all this time, that they still do not have effective regression testing in place ? Any sane development team (who wants to remain sane ;-) builds this as a priority ... unless they aren't given the resources?
I think (don't remember though) that this never worked, so regression testing would not have helped.
What is really to worry, that features aren't consequently and completely implemented (and tested). With a new option in Lightroom 3, Adobe has offered support for keywords with spaces. It seems that this feature as neither been thoroughly analysed or implemented. Thus, we face the currently inconsequent support of it:
keyword completion only works with the first entered word, but when you enter a complete keyword hierarchy using the ">" letters
filtering seems to have problems too

Drill down is not working in 3rd level of dimension hirarchy

Hi,
drill down is not working in 3rd level of dimension hirarchy,any issues. once i clicked on 3rd level it goes to detail level instead of going to 2nd level
thanks

any updates

Connect a Client Computer Not Working At All

I have a new Windows 7 clean install with updates that is not able to connect to SBS 2011 at all.
In the past (about 2 years ago) I ran into the same problem and by following the simple steps outlined here - http://blog.ronnypot.nl/?p=594 - it worked no problem. Now it does not help at all.
For a test, I took a spare machine and did a clean install of SBS 2011, applied the updates (except NET 4.5.1). When I tried to connect the new Windows 7 machine to the new SBS 2011 machine - this also has failed.

Server's ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : BLAH-1
   Primary Dns Suffix . . . . . . . : BLAH.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : BLAH.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : BLAH.local
   Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
   Physical Address. . . . . . . . . : REMOVED
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : REMOVED
                                       192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : REMOVED
   DHCPv6 Client DUID. . . . . . . . : REMOVED
   DNS Servers . . . . . . . . . . . : REMOVED
                                       192.168.1.12
   NetBIOS over Tcpip. . . . . . . . : Enabled
   Connection-specific DNS Suffix Search List :
                                       BLAH.local
Tunnel adapter isatap.{REMOVED}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : BLAH.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Workstation's ipconifg /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : BLAH-1
   Primary Dns Suffix . . . . . . . : BLAH.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : BLAH.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : aspa2.local
   Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
   Physical Address. . . . . . . . . : REMOVED
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : REMOVED
                                       192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : REMOVED
   DHCPv6 Client DUID. . . . . . . . : REMOVED
   DNS Servers . . . . . . . . . . . : REMOVED
                                       192.168.1.12
   NetBIOS over Tcpip. . . . . . . . : Enabled
   Connection-specific DNS Suffix Search List :
                                       BLAH.local
Tunnel adapter isatap.{REMOVED}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : BLAH.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
HCI3 - I tried the steps you have listed and it did not work.

Remote Desktop Connection to VM does not work after sysprep

Hello altogether.
Often asked, but never answered with an applicable solution!
What shall
we
do if
we
get no access to a Azure VM via Remote Desktop
Connection?
Everything went well: access to the VM via RDC was working perfectly!
Then
the idea came into
our
mind to create an image of the VM by use of the Azure Management Portal.
We
found that
we
had to apply “sysprep”
on the VM.
We
did it.
Then we did not take the image and decided to go on with the VM.
But if we start the VM we get no access via RDC!
We tried to find a solution by reviewing the already published contributions by other Azure
users. But none of the replies marked as answered supply with a qualified solution.
So can one provide a really applicable solution to us on how to arrange the further use of the VM?
Thank you in advance.

There is an issue right now where the VM may start unexpectedly after you have run sysprep and selected the shutdown option (which is normally what you should do).
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/fafb9ee6-1e57-46ba-8440-27467ad986cf/image-capture-issue-vm-unexpectedly-started-after-guestinitiated-shutdown?forum=WAVirtualMachinesforWindows
But regardless of that issue - you can't use that deployed instance of the VM after you've run sysprep on it. It needs to stay shutdown, then you select Capture to create an image from it.
If you start it back up, either intentionally, or it is started unexpectedly because of the issue above, it will be sitting at the first interactive screen of setup. RDP is not working at that point, and since there is no console access to an Azure VM, there
is no way to get past that prompt.
For other scenarios, you might be able to attach the OS disk of that VM as a data disk to another VM, and while you could do that in this case too, there is no supported method for disabling sysprep at that stage of setup.
So while you could attach it to another VM to get data off of it (you would have to remove the VM first), the VHD is no longer in a supported state to use as a VM itself.
Thanks,
Craig

After working great why will my home share not work on my iphone and ipad mini

I had been running home share on my iphone great. I share a music library with my wife. We just bought an ipad mini and i was messing around with the ipad and set up home share, however it would not work. I tried logging out of my iphone and re connect and it will no longer connect. I have not been able to get home share to work on the mini.
I have browsed all the feeds, but not getting anywhere.

Welcome to the Apple Community.
Have you checked all devices are connected to the same network and tried restarting your router.
The following article(s) may help you.
Troubleshooting Homesharing
Troubleshooting WiFi Networks

FaceTime does not connect, iChat video does not work, Skype video does not work (LION)

Hi everyone,
I am using OS X 10.7.3 2011 Macbook Pro 2.2 Ghz Intel Core I7 8GG 1333MHz DDR3 RAM 500GB HD.
What happens when I try to call someone in FaceTime: Webcam light is on and I see myself on my screen. It rings and after a while it says "X is not available for FaceTime (or similar).
In iChat I can text chat, but video calls do not work. In Skype, I can do audio talking, but when I try to use my video, it fails to connect.
This seems to indicate to me that there is a system-wide, rather than user or program-specific problem, in which my system cannot connect to others when using my webcam.
Can anyone offer any guidance on this matter? I am pretty tech savvy. On my home network I have tried port forwarding/opening and all that, without luck. I am worried that maybe I could have made a mistake in terminal or something some time ago, but I don't go in there very often and it is usually for very specific things.
Any help would be greatly appreciated. I am moving away for four months, and I really need this to work so that I can chat with my lovely girlfriend. Please see the notes below prior to commenting.
Cheers
Notes:
Internet is working fine. I use three different network, one of which is wired and works fine.
I have tried to create new users, still no luck
Webcam works fine in PhotoBooth
I am logged into FaceTime properly (this is simple, right?)
Reinstalling OS X to fix this problem is not an option
I have tried FaceTime with several people with several devices (e.g., iPad, iMac, iPhone)
FaceTime on my iPhone works with other people on same network

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Messages on Macbook Pro Screen Share not working

Hi so on messages my friend is trying to share her screen with me and it is not working. When i added her it isnt letting me share my screen or ask to share hers. do we both need to have the same account type? how do i get it to work? and do i put in her email as the username? I have an aim account and she has a gmail. what is bonjour and do we need it to work?any insight is appreciated

Try Sytem Preferences -> Sharing
Enable (check) Screen Sharing on both computers.

My connection with itunes is not working

Please HELP I have done everything from flushing, firewall exceptions and reintstalling the download of itunes....My connection is not working. Have spoken with two men from India and with no help from them.....

Dear Fourms,
Look at how many postings there are for the same error. thousands on google and more on here. We all have tried everything even seeking each others advice in forums. i have also never seen an answer from APPLE that will resolve the issue. i think they need to check their server settings, their product (itunes), and work directly with us to resolve the issue. if you post in the fourm then make sure you also summit feedback maybe this will let them know this is a HUGE and FUSTRATING problem. Again another wast of money.
*First we bought an expensive iPod because of its latest and greatest technology by apple*
THEN THE ISSUES CAME
We turned off our firewalls
opened every port
tried reinstalling
cleared our temp and dns cache a million times
setup new accounts to try again
spent probably a total of a month at one consecutive time trying to fix this issue.
Update a thousand times.
Ran that darn network diagnostic in itunes and windows
Bought new routers
Disabled, updated, uninstalled and reinstalled our drivers
Pinged, ran trace routs and everything to verify we connect to the server
But is it really still OUR problem to come up to a solution?
this is all in my own opinion.
But if anyone finally gets a resolution, maybe apple?, then let ALL these people on the web and in these forums have a real and truthful resolution and reason it is happening.

ITunes Home Sharring not working correctly.

My itunes homesharing is not working correctly. I have a Windows 8 computer and I am trying to share with my partners Widows 7 computer. Both computers are running the newest version of itunes 11 (downloaded yesterday). I sign in and turned on home sharring with the same user id and password. For the first 20-30 mins it worked perfectly, I could open her library and she could open mine and we could download songs from each other with no issue. We closed both computers and about 2 hours later turned them on to try again. Now my computer (Windows8) always shows up on hers but her computer only shows up about 1/2 the time for me, and half of that time if you click on her computer it says loading then stops and her computer has disapperard again. I can eventually get it to work after many turning off and on of home sharring but it take about 15-20min each time to get it working. Is this a problem others have seen? Does anyone know a solution?

This issue has now been completely resolved with the introduction of iTunes 9.2 Everything up and running again - thank you Apple! (Still an issue with Dictionary app/Wikipedia not functioning correctly, this has not been resolved)

Connection to AD Share not working past 1st level

Similar Messages

Maybe you are looking for