"CONnECTION TO AUDIO DEVICE FAILED"

Does anyone know how to stop the error message from popping up, "CONNECTION TO AUDIO DEVICE FAILED" ?

Hey GerryGoertzen,
Welcome to the BlackBerry® Support Community Forums.
Thank you for your inquiry, this would be caused by a paired Bluetooth device. Go into Manage Connections > Networks and Connections> Bluetooth > Here you can see your Paired Devices, delete any you are not using.
Cheers.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

'Connection to Audio Device failed' - constant Bluetooth message

I have a Blackberry Torch and keep getting the above message, despite there only being 3 paired devices, each of which works fine when on. The message repeats every 3-5 seconds whenever I'm in the house, but no other device can be found on search.
Any ideas?

Hey Occam1,
To better assist you with this issue, what types of Bluetooth® audio devices are you connected to? This message appears when you are out of range of the Bluetooth® device, you may want to disable your Bluetooth® when you are in your house this would stop the prompts from Bluetooth®.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

No "connect to audio device" option for E71

I've been trying to connect my nokia BH-102 headset to my E71, but when I go to the Paired Devices tab and press the option button, the "connect to audio device" option is not there. The only three options that appear are "new paired device", "help", and "exit." I've searched for soltions for this online, but thus have not come across any mention of this problem. Am I missing a firmware update of some kind or is this an entirely unique problem?

Solved my question. Somehow 20 minutes of searching the forums didn't turn up the solution but when I posted my question the box on the right had 3 posts with a similar question and solution. Sorry this has become a repeat post.
I would delete it but can't.
Here is a link to the solution that worked for me. I used ONYX.
https://discussions.apple.com/message/9760772#9760772

Nokia 112 can't connect to audio device

Hi all,
I recently bought a Nokia 112 (RM-837) and wanted to play some music with it.
When I try to play music to my bluetooth audio device (Stereoboomm 500), it displays this error:
"Service not supported by other device".
I am able to successfully pair the two devices, but when I try to connect, it will fail.
Audio device is bluetooth v3.0, Nokia 112 bluetooth v2.1, but this shouldn't be a problem because bluetooth v3.0 is backwards compatible. Audio device is not broken as it works with other phones.
My Nokia has firmware version 3.32.
I tried to update my Nokia with the latest updates, but also this fails (even with factory settings!).
But this shouldn't be the problem either because the update hasn't any changes relating to connectivity.
What could be the problem?
Thanks in advance!
Solved!
Go to Solution.

Okay, I figured it out..
Apparently the Nokia 112 doesn't support the A2DP bluetooth profile that's needed to stream audio to bluetooth speakers.
http://developer.nokia.com/Devices/Device_specifications/112/

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

What devices are you trying to connect to, and are they in pairing mode? Is the phone in pairing mode? The iPhone only connects to audio devices and to computers for tethering. You cannot use BlueTooth on an iPhone for file transfers to other phones or computers.

Update Audio Devices while program is running

Hi
I want to connect an audio device while a labview VI is running. When I do so, the audio device doesn't appear in the audio device list. Is there any activeX node or other possibility to refresh the audio devices in labview while a VI is running?
I'm using Windows XP and LabVIEW 2010, but I think an upgrade to 2011 wouldn't solve my problem.
Solved!
Go to Solution.

Hi Kolja,
just talked to a colleague about the issue and we solved it now. The solution are VI references and reference calls.
Take a look in the example in the attachment. Using this piece of code the "Get Num Devices" function (as an example for every other function you wish to use) is reloaded everytime it is called, resulting in updated device counts at runtime.
Good luck using it and best regards,
Benjamin
Attachments:
Audio Dynamic LV2010.zip ‏10 KB

USB audio device loses output connection

I use a MobilePRE USB interface and had no problems until recently. My iMac is set to never sleep but if I do not use the computer for a few hours the output from the MobilePre is gone.If I change to the driver to the internal headphone output on the Mac all is fine but in order to use the MobilePre as output I must restart, then it is fine until the next day or a few hour later.
The same time that this problem developed, about a month ago, I also noticed a low level snap or popping sound. This happens through my external speakers and is triggered by any sound activity approximately 30 seconds later. It even happens with the volume turned all the way down and sounds like a connection is being made. Like I said these two problems started about a month ago around the time Apple was sending a lot of updates. I have read a long thread on the OSX forum and know this is a pervasive problem with no solution yet. I mention it here as a curiosity as it started around the same time as the USB audio device problem. My hunch is that it has something to do with a recent update.
I don't think this is a GarageBand problem because it is the same no matter what software is outputting. I ask on this forum because there some knowledgeable audio heads here.

Check the archlinux news item which calls for an entry in kernel commandline .................

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

TS1368 cannot connect to ITunes message reads Service Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system service

Unable to connect to ITunes message reads Service Apple Mobile Device failed to start. Verify that you have sufficient privileges to start services

Try removing and reinstalling Aple Mobile Device Service.
How to restart the Apple Mobile Device Service (AMDS) on Windows
Remove and reinstall iTunes and AMDS
If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista or Windows 7
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.
If that doesn't do it, take a look at the security software on your computer. Use this as a guide -> iTunes: Troubleshooting security software issues

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

An HNAP call to the device failed because the HTTP connection was broken - EA3500

OK - thanks in advance for your help -
I have a linksys Linksys WMP300 and am able to connect to the EA3500 (shows connected at 270 Mbps) Excellent Connecttion but I can't access the internet or any of the other computers on my network. The stupid thing is that I can connect to my neighbor's unsecured network which is also a linksys router.
All of the other computers on the network connected just fine - my son has a laptop running windows Vista, we have a family computer using Vista, my wife's laptop is Windows 7 (we just had a guest that connected just fine).
Here's the error code I get - any help would be appreciated!
Error code: 82BD0304
Error description: An HNAP call to the device failed because the HTTP connection was broken.
Model name: unknown
Model number: EA3500
Serial number: 12C10603215584
Firmware version: unknown
Operating system: Windows XP SP 3
Software version: 1.4.12005.2
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: 192.168.1.36

Thank you for the reply -
Router is assigning IP address automatically. Although I have been using a static IP address in the past, this is no longer the case.
The WMP300 is on an Windows XP, SP3 PC.
Since running into this issue, I have not only disabled all security (to make sure that firewalls and/or virus software was causing problems) I completely uninstalled my McAfee. I have disabled Windows Firewall also. "Flying Naked" as it were.
I am surprised that Cisco has no solution - others are also having this problem.
It MUST be the router - I am able to connect to my neighbor's router, able to connect to my old Linksys WRT150N. Anyone else have thoughts?
This is frustrating.

Device failed to connect when trying to sync contacts

When I try to sync my contacts with outlook all of a sudden I get a message that says "the device failed to connect". I did upgrade to 4.7 DM recently. I am not sure if this might have had anything to with it. I have now tried to uninstall that upgrade and go back to a previous version of DM. Any ideas on what might cause my BB to not be recognized by my system anymore?
Thanks in advance!
Solved!
Go to Solution.

I just resolved the problem by pulling the batteries and then plugging the BB into my computer. This reset something and now it works. Weird. Thanks for your reply.

Suddenly my iPhone and all other apple devices have stopped letting me access my emails. I keep getting the message "cannot get mail, the connection to the server failed". Can anyone help?

All my apple devices have suddenly stopped allowing me to access my email account. I keep getting a message saying "cannot get mail, the connection to the sever failed". What has happened and how do I fix it?

Have you seen this? Take a look. There are issues with Microsoft services today.
https://status.live.com/

"CONnECTION TO AUDIO DEVICE FAILED"

Similar Messages

Maybe you are looking for