Connection to bluetooth /enable will not turn on

The bluetooth was working fine until the other day. The Bluetooth enable will not remain on,

Thank you. I therefore recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-ho​w-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • T420 windows 8.1 Manage Bluetooth devices will not turn on

    I have a T40 that I upgraded from windows 7 to windows 8, and recently to windows 8.1, blue tooth device act flaxy and when I go to "Manage Bluetooth devices".  I have a bluetooth logictech v470 mouse which works most of the time and a bluetooth headset Hype (HY-91)
    I have 2 issues:
    1. can not turn on the slider to turn bluetooth on easily. - I finally get it turned on after awhile by double clicking, waiting, or just luck, not sure why it just does not just go on.
    2. I have trouble with my Bluetooth headset device the second time I connect no matter what I do unless I reboot or re-pair the headset it will work.
    I thought it could it be related to two bluetooth devices, but I powered down the mouse. I thought skype was causing an issue, but I quit it and made sure it was not running in the background.
    I did find if I turned off the internal speakers and internal mic only then the headset works properly.
    Any ideas?

    Well my problem is now solved, both devices are bricked, Apple Store replaced both devices today, After talking with my daughter had the iPad mini was charging and it updated iOS8.1.3 and then bricked, tried all the things you suggested with both devices.  Yes, I agree about not letting my devices die, this was the first time my phone had died in 5 months but I firmly believe iOS 8.1.3 was the cause of both devices demise.  Apple checked both devices and promptly replaced both in about 30 minutes.  I hope this is not the way Apple is planning on continuing with software updates.  I have 10 apple devices and have been a strong supporter of their company, but these kind of half done updates are the reason I removed all Microsoft products from our household 7 years ago!

  • IPad will connect to PC but will not turn on

    Hello,
    I have a 64GB 3rd Generation iPad that suddenly decided to not turn on anymore. I charged it last night as I always do and today when I tried using it, nothing. I thought maybe it just didn't get charged, but no it does absolutely nothing, even trying the recovery mode (Power Button + Home Button for 10+ Seconds)
    The strange thing is when I plug it into my computer it detects it. I tried using it with iTunes, but since I've never used it on this computer it just hangs at the "To allow access, please respond on your iPad..." which I cannot do.
    This iPad has a lot of important data and work I have stored on it, which not all of it is stored on the iCloud. I'm assuming that the screen has gone bad, but I don't hear any sound either so it could be worse.
    Please if anyone has any ideas please share, I'm up for trying anything at this point.

    If charging failed and the battery drained completely it may take up to 30 minutes before the iPad responds. Try a different known good charger and cable. Charge for 30 minutes then while still plugged into the charger, reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot. If it starts you can suspect there is something wrong with your old cable and/or charger. If the iPad still does not charge inspect the connection ports for dirt, lint or fuzz that may be preventing a good connection for charging. If the posts look clear Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • I cannot get my Iphone 5S to connect to my Bose Soundlink III, the blue light will not turn white.

    I have a Bose Soundlink III and have had no problems connecting to my Iphone until the past three or four days. It will not connect and the blue Bluetooth button will not turn white. I have done everything it says to do in troubleshooting the Soundlink and it does exactly what it is suppose to do, except light changing and connecting. My phone shows Bose SLIII and it says it is discoverable. If I touch the the Bose SLIII area it keeps saying Connection Unavailable and to check that it is turned on and in range. Any suggestions??

    Or just try off>>on with Bluetooth on iPhone works for me when my Bose "play up"

  • My 5th Gen iPod touch does not keep time and the bluetooth will not turn on. Full restore did not fix.

    Recently my 5th generation iPod Touch stopped keeping time. As long as the screen stays on, it will stay accurate, but once it "sleeps" the time reverts to the last accurate time it had. If I go to Settings>General>Date&Time> and turn Set Automatically off and on, it will catch up, but just for as long as the screen stays on. Not too friendly for battery life that way. Also, maybe unrelated, the Bluetooth function will not turn on. When I try to turn it on, I just get a constant spinning wheel.
    I have tried everything from a simple restart to a full device wipe back to factory default. No change. I took it in to the Genius bar this afternoon. They tried a diagnostic and another wipe. Then they said they didn't know and I could pay $150 to replace it. Not a bad deal, but not what I wanted to hear.
    Any ideas?

    All I can suggest is
    Try DFU mode and then restore again to factory settings/new iPod              
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If still problem that means a hardware problem

  • 4gen 20g will not turn on, light up, or connect

    I recently bought a 4gen 20g iPod and today it was working fine. I took it with me a few places, and was listning to music. I got home, set it on my counter, and now it will not turn on, light up, or connect to a computer. It seems to be 100% dead. I have pushed all the buttons (the reset commands, menu buttons, etc.) my "lock" is not enabled, and the battery was half-way charged (although i have tried to turn it on while plugged in as well). Anyone got any ideas? tomarrow I leave for mexico at 4:30am PST and I'm going to be ****** if my iPod is broken.

    Try these.
    iPod won't turn on.
    iPod battery doesn't charge.
    Your Windows PC doesn't recognize the iPod is connected.
    iPod shows only an Apple logo and doesn't start up.
    When restoring the iPod, it's often useful to put it into disk mode first.
    Putting iPod into disk mode.

  • TS1398 first off my ipad will not turn on by just pressing the on button,although its fully charge. ok than when I plug it up its says wifi is not connected

    First off my ipad will not turn on by pushing the start button. when plug up and after touching setting,wi-fi on the left says not connected

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • IPod Touch 4G will not turn on, charge or connect to computer.

    I purchased my iPod Touch 4G in October 2010 in America. Last week, while my iPod Touch was connected to my laptop with the USB cable, I pressed the home button with no response. I have tried all forms of reset that I could find on the Apple website with little luck. The iPod Touch will not turn on, connect to the laptop, charge or show up in iTunes. I have tried on several occassions with numerous different methods to charge the iPod Touch but to no avail. There is no response to anything I do when trying to rectify the problem. I believe that my warranty is no longer intact as it has been over a year since the purchase, and I will not be returning to America again until the end of this year. I also updated the iPod Touch to the latest iOS version available before it ceased working.
    Any help is much appreciated.

    For your error try:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    iggy17 wrote:
    having the same problem does yours come up with a code that says it cant be connected (0xe8000065)?

  • HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

    My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

    My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
    I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
    Can anyone please help?

    Hi gscoops,
    Welcome to Apple Support Communities.
    You may find the steps in our iPod Troubleshooting Assistant helpful:
    http://www.apple.com/support/ipod/five_rs/classic/
    Best,
    Jeremy

  • My iPod turned off and it will not turn back on or connect to iTunes.

    I was writing a note in my iPod Touch & it just shut off on me. The battery was fully charged, and now it will not turn on or connect to iTunes. I only had my iPod for 3 months... I do not know what to do..

    Try a hard reset. If that does not work, contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • My ipod 4 will not turn on, charge or connect to itunes/computer. nothing has happened to it to cause any damage to the hardware.

    i have  n ipod 4th geration. it has no hardware damage or water damage. it will not turn on, charge, or connect to itues/computer. my computer will not even pick up any hardware connection when i plug it in. the screen stays black. ive tried holding the power and home button then letting go of the power button but nothing seems to be working. someone please help.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT4061 My phone will not turn on. I did a hard reset but all that my screen will show is a picture indicating I should connect the power cord to iTunes (iTunes icon).I don't know my serial # and I do not have acces to my laptop

    My phone will not turn on. I did a hard reset but all that my screen will show is a picture indicating I should connect the power cord to iTunes (power cord symbol with an arrow iTunes icon).I don't know my serial # and I do not have acces to my laptop.

    The serial number has nothing to do with this.
    YOur phone is in recovery mode.
    You will need access to a computer with itunes on it to restore your phone.
    http://support.apple.com/kb/HT1808

  • My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

    my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

    Has the iPod been wetted?
    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer.
    Also see:
    https://discussions.apple.com/message/12690674#12690674
    https://discussions.apple.com/message/13032101#13032101
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

Maybe you are looking for

  • Anybody else finding that the iPod classic cannot handle their iTunes database?

    I have a very complex database that heavily uses the smart playlists. I have playlists referencing playlists, etc. and the last 2 operating systems can't handle it. I've got way too many hours behind my iTunes database and I'm unwilling to throw it o

  • Drag & Drop Functionality Doesn't Work in External SWF?

    Hi all, I'm currently a TA for a Flash course at my school.  We're using AS 2.0 and working with external SWFs. I think this might be pretty simple to remedy.  Well, at least I'm hoping! A student is having trouble with drag & drop functionality when

  • Add a foriegn key constraint to to a sub type on an object table

    Hi, I'm trying to set up a new table of an object type in our DB at work and on it I want to create a foreign key constraint on one of the attributes of one of the sub types The table is called documents and is a table of document_ot Definition: crea

  • AirPort "By Default Join"

    In my network preferences when I have "Location: Automatic" selected, my AirPort tab's "By Default Join" only allows me to select "A specific network". If I create a new location "Work" I can select "Automatic" and "Preferred Networks". Is this the w

  • Implementation Project status set to finished

    When the project status once is set to finished in transaction SOLAR_PROJECT_ADMIN it can't be set back to 'In process' again. Is there a workaround for this? BR Rita