Connection to cups server failed
when trying to run printer control I get connection to cups server failed, check to see if cups server is running and correctly installed. when trying to restart server it fails with message unable to find a running cups server. Here is the applicable part of rc.config
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal @kdm syslogd klogd @network !netfs sshd crond)
# End of file
current kde is 3.5.7.1
/usr/share/cups/model/foomatic/hp lists all drivers for my hp psc 2210
hplip 1.7.4 has been installed and restarted. any ideas?
Hi, I have the same problem. I went through the setup wiki, did the debug, etc.
When I installed the cups package on that page it seems to have messed up konquerer (it no longer opens webpages due to an io slave problem)
Anyways, I still get the following problem:
Unable to retrieve the printer list. Error message received from manager:
Connection to CUPS server failed. Check that the CUPS server is correctly installed and running. Error: localhost: read failed (14).
Thanks in advance for any help...
Last edited by LinuxViking (2007-10-24 01:40:38)
Similar Messages
-
DMS-200 doesn't play uploaded videos: "Connection to video server failed"
Hello, everybody!
I have CISCO DMS-200 deployed. I have console and an http access, I can manage options, I can upload videos, but I can't play them in web-browser. The device was bought 6 months ago and deployment was done by 3rd party. But the video playing over browser didn't work ever.
There is no proxy between PC and DMS, I have all codecs installed on PC, I've checked FireFox, IE, Chrome...
When I try to start video playing, the following message appears: "Connection to video server failed". (See screenshot).
I have some ideas about the reasons.
First, may be I need an additional license for Player at DMS-200 side? Because in Digital Media Players section I have "This feature is not licensed".
(See screenshot).
Second, may be there are problems with File Hosting Locations? I have several error messages like "URL test failed" in the appropriate section (Please, see screenshots).
So, please, share you ideas about the issue! There is a few information about the problem, I can't find anything. Are there any ways to turn on debug at DMS-200 side?
I've added seller's specification and pics.
Please, help!
Many thanks in advance!!!I've added licenses are currently at DMM.
-
My Yahoo email asks me daily for my email password or says the connection to the server failed. Is anyone having this problem currently? I noticed old messages in chat mentioned the same problem. I get into my Yahoo email fine on my desktop computer for several weeks without re entering a password. But the IPad does not seem to be connecting daily with Yahoo without putting a password in again.
So, I didn't change anything and now it is working better. I still get the odd error though.
I have a feeling this has something to do with the SSL update Apple released and it was their server side. -
[Solved] Samba log spam: Unable to connect to CUPS server
Hi everyone,
I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
Those last two lines get spammed constantly.
I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
Unfortunately it doesn't appear to make any difference.
Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = no
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
; [homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
; [printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[shared]
path = /media/shared
valid users = foosoft
public = no
writable = yes
[tomato]
path = /media/data1/tomato
valid users = foosoft
public = no
writable = yes
show add printer wizard = no
printing = none
printcap name = /dev/null
disable spoolss = yes
I'm totally out of ideas here, anyone have a tip on what I could try next?
Last edited by FooSoft (2009-04-18 19:52:28)glad you posted it first i had the same problem.
However, samba was complaining that
printing = none
was invalid. I removed that line and it works great.
thanks
Last edited by lio (2009-10-16 00:20:14) -
I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail The connection to the server failed. I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying. Can someone please help me with this? -Stu
Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason -
My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same problem and have found a solution - only stated happening since iPhone was updated .
Hello there, Badboymbc.
The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have been receiving the message ' Cannot get mail. The connection to the server failed' but I am connected to WIFI. I have also been receiving 'Cannot send mail, an error occurred while delivering this message.
Hmm, that's odd JeanEB. The error message referts to the connection to your email server not to cellular data or connection to wi-fi. Go to Settings>Mail, Contacts, Calendars> Select your account and type in your password again. If this doesn't resolve it, delete/re-add the email account.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
When I try to open my mail I get The connection to the server failed message.
Message appears when I try to retrieve my mail: Cannot get mail. The connection to the server failed.
Delete mail account and setup account again.
-
I set up a hotmail account and I got a message stating "the connection to the server failed" what do I need to do to get my email working
Do you have a good wifi connection?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Connection with license server failed
Hi, I am having problem connecting with my license server when I am using the DI Server (webservice).
Error encountered:
Error env:Receiver 100000001 Connection with license server failed.
Does anyone know what is the best practice for this configuration? Thanks.
Regards,
RodmannHi Alvin,
I am having the same problem on one of my development machine. I have installed DI Server and Server Tools on it.
The license manager is working fine.
But when I try to connect to the company object in a web application it just throws the same exception
Error:Receiver 100000001 Connection with license server failed.
To test the port 30000 i changed it to any thing like 1234 and it gave me message "Failed to connect to license server", changing it back to 30000 and connect brings in all the hardware/license keys etc.
Kindly help what you did in your case to get rid of this problem.
Experts you support in this regard will be highly appreciated.
Kashif -
RFC_ERROR_COMMUNICATION: Connect to message server failed
Hi,
I think this is the most common error that one can face and have seen quite a few threads in the forum. Still, i couldn't resolve my problem.
I am getting the following error when i tried to connect to SAP using SAP JCO connector with load balancing.
(102) RFC_ERROR_COMMUNICATION: Connect to message server failed
Connect_PM MSHOST=sapserver, R3NAME=D11, GROUP=Group1
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host sapserver, service sapmsD11)
TIME Wed Jun 24 16:05:49 2009
I added the service sapmsD11 in the services file of my client as well as in R/3 server.
I got the above error when i tried to connect using load balancing. Without load balancing, i was able to connect to R/3 server successfully. Can any one tell how to figure out the message server host name ?
Can the application server host name and message server host name be same ?
PS: I am able to ping my R/3 server from my client.
Thanks,
Prasad.Hi,
Check that you have configured properly using the below document. And check the message server of R/3 is configured properly in the SLD.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
Function module to get the message server host name and port in R/3.
SLDAG_GET_MESSAGE_SERVER_INFO
See this thread also..
Re: Jco Destination
Regards,
Charan -
Connect to B1i server failed - HTTP/1.1 404 not found
Hi All,
I currently have B1 8.8 PL14 installed and in the process of installing B1i when I get to Step 3/5: Configure B1i Parameters and select Test Connection I get the error message 'Connect to B1i server failed - HTTP/1.1 404 not found'. I have followed. I have undertaken the installation as per the recorded session by Benno Eberte and regrettably I cannot set a successful connection.
Can anyone assist?
Best regards
EarlHello,
personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-8012) Company version mismatch
{b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
Hope it helps
Kind Regards -
I got an iPad mini over Christmas and have had no issues setting up/managing my email until yesterday. I've had my Exchange email working for almost a month, and yesterday I stopped getting emails and getting the error: "Cannot Get Mail. The connection to the server failed."
I tried resetting the device (multiple times) and deleting and recreating the Exchange account (multiple times). This is getting annoying because it worked fine up until yesterday. I'm not aware of any updates to the device, or any changes that have occurred since yesterday.Due to a screen issue, I had my iPhone 5 replaced two days ago. I repeated deleted the mail account and kept adding it but this did not make any difference. When I attempted to setup the new phone with my Google (Gmail via exchange active sync) accounts I was receiving this same "Cannot Get Mail" error. From what I was able to gather, this problem should be affecting Gmail accounts set up via Exchange. When originally purchasing the phone I was assisted and directed to set up my Gmail account through Exchange because it had the ability to use "ActiveSync" and push not only mail and calendars, but all of my contacts as well. I found this article regarding the subject.
http://www.pcmag.com/article2/0,2817,2413283,00.asp
What it came down to was having to delete my Gmail via Exchange account and separate it into two different accounts, a regular gmail account for my mail and a CardDAV account for my contacts.
Here is what I did. Google is changing their system and for new registrars Exchange ActiveSync will not work so you will be unable to register your account via Exchange and have your mail, calenders, and contacts all pushed together. I find this change really annoying. If you are having problems accessing your contacts after deleting the mail account, like I was, here is the work around.
To circumvent this issue go to Setting > Mail, Contacts, Calendars > Add Account > Other > Add CardDAV Account: Under server ender google.com, then your email user name and password, then click next to verify the information.
I hope this helps. -
Roundcube: connection to storage server failed
I have done a clean install of my server (10.8.2 and 2.2.1) and have reinstalled Rouncube that was working fine on the old server (10.8.2 and 2.1.1).
However when I connect to the website I get the error "Connection to storage server failed"
I think it is failing to connect to the IMAP server but I cannot find anything in the Console or Server logs when this happens. Any ideas on how to debug?
I am pretty sure I have followed the identical installation path as before - and have checked and rechecked but there are no obvious differences in the config files.system
May 23 17:57:52 server.m10fire.com com.apple.SecurityServer[21]: Succeeded authorizing right 'system.privilege.admin' by client '/Library/PrivilegedHelperTools/com.apple.serverd' [69] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [107] (100000,0)
May 23 17:58:01 server com.apple.launchd[1] (org.dovecot.dovecotd[29325]): Exited with code: 89
May 23 17:58:01 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
May 23 17:58:12 server com.apple.launchd[1] (org.dovecot.dovecotd[29328]): Exited with code: 89
May 23 17:58:12 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
May 23 17:58:22 server com.apple.launchd[1] (org.dovecot.dovecotd[29330]): Exited with code: 89
May 23 17:58:22 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
May 23 17:58:32 server com.apple.launchd[1] (org.dovecot.dovecotd[29334]): Exited with code: 89
May 23 17:58:32 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
May 23 17:58:42 server com.apple.launchd[1] (org.dovecot.dovecotd[29337]): Exited with code: 89
May 23 17:58:42 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
May 23 17:58:52 server com.apple.launchd[1] (org.dovecot.dovecotd[29340]): Exited with code: 89
May 23 17:58:52 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
May 23 17:59:02 server com.apple.launchd[1] (org.dovecot.dovecotd[29343]): Exited with code: 89
May 23 17:59:02 server com.apple.launchd[1] (org.dovecot.dovecotd): Throttling respawn: Will start in 10 seconds
odd mailserver log
May 23 00:30:03 server newsyslog[4619]: logfile turned over -
I am unable to receive email from hotmail. It is spinning with checking for email message. Some time it downloads old emails and then those emails disappears and redownloads. some times shows connection to the server failed. From laptop there are no issues with account or email. Any ideas?
Hi Friend,
Look at this discussion: https://discussions.apple.com/message/20830562?ac_cid=sa123456#20830562
You probably will think that discussion has not the same problem as you, but probably has your answer there.
So please have a look and try those solutions.
Hope it will be helpful
Maybe you are looking for
-
Creation of Header and Sub headers in Hyperion data forms
Hello all, I have a Hyperion Planning dataform with many account members in columns. I want to create header to differentiate each category of accounts. A-Type A001 A002 B-Type B001 B002 B003 How can i do the header creation using XML code of the for
-
Problem with Stacked Columns in Business Graphics
Hi, Has anyone used the stacked columns chart type in business graphics? Am facing a problem with this. I am using the SimpleGraphics example demo with 2 dataseries, the values ranging from 0-10. It works fine if the chart type is Columns (this is
-
Hi All, I need to configure CNPJ number for the new plant, I have a doubt on this, CNPJ number have following format , 12.345.678./0001-96 and these digits represent three distinct elements: 12.345.678. - The first eight digits refer to the company r
-
Size Jitter isn't changeable in Photoshop CS6
Hi, I'm suffering from a very strange thing, about which I can't find any information on Google. Please help me. My software information: OS: Windows 8 64bit Photoshop: Adobe Photoshop CS6 (Adobe CS6 Master Collection) As
-
Tracking - Chnages made using T.Code CJ32 and Cj37
Hi Experts, Please let me know how to track changes made in a project/ for a WBS element by using T.code CJ32 (Change release) and Cj37 (Change Supplement). Regards, Channa Edited by: Channa on Jan 25, 2012 6:37 AM Edited by: Channa on Jan 25, 2012 6