Connection to database takes a considerable amount of time

Hi,
This is basically an IDS 10g thing. Same issue in Reports
1. Whenever I connect to Oracle 10g by pressing CTRL J, it takes like 4-5 mins to connect to Oracle. This only happens once till I close down Forms 10g and reopen it.
2. A related thing, I cannot FILE-OPEN any .fmb file till I first connect to database, or else I just get one of those windows errors (not responding) and the form builder crashes.
Environment:
1. Windows 7 x64 and x86
2. Windows 8 x64
3. Connecting to Oracle 10g.
i7 processor 8gb ram, plenty of hard drive space.
Why does this happen, how do I fix it?
Edited by: Asim Siddiqui on May 23, 2013 3:16 AM
Edited by: Asim Siddiqui on May 23, 2013 3:17 AM

Asim Siddiqui wrote:
1. Windows 7 x64 and x86Did you install the required patches for this platform?
cheers

Similar Messages

Why is the "Empty Trash" option missing? All I have is "Secure Empty Trash" which takes a considerable amount of time.

Why is the “Empty Trash” option missing? All I have is “Secure Empty Trash” which takes a considerable amount of time.

check your finder preferences.

Update 3.1.3 Vault backup takes an inordinate amount of time...

Installed the update, 3.1.3. Now clicking Vault icon to update the Vault, the update takes an inordinate amount of time. In addition after the update the Vault icon, lower left, remains red.
Normal Vault update goes to the server, prior to the update it ran quite fast then icon turned black. As a test I created a new Vault on my Desktop (deleted the original), again update takes an inordinate amount of time, still the Vault icon is red.
MacBook Pro, 8 GB RAM, 10.6.8, 2.4 GHz i5.

Hi shutterp33d,
That speed answer is a yes and no. To the local drive yes speed is almost where it was prior to the 3.1.3 update. Over to the network drive it is quite slow. Even direct connected to an external vault update is much slower than before the 3.1.3 update.
My network is AirPort Extreme to which I have a Pogoplug connected with RJ45, a Seagate 1.5 TB external drive is connected to the Pogoplug via USB 2.0.
At present Aperture vault update has been running forty-five minutes being one third through. So, shutdown the Pogoplug did a direct cable connect to the Seagate from the laptop still vault update is taking a longer time than before the update.
This time the icon has changed from red to black. Then I disconnected the USB cable direct connect, reconnected the external to the the Pogoplug. Maybe this is a Pogoplug hit maybe not.
Thank you for listening.

Estimating Size of backup Items taking considerable amount of time?

The part of the Azure Online Backup that does the "estimating size of back items" is taking hours to complete. Is there anyway to speed it up? I want to be backing up files right away, not have to wait for an estimate of size.

Hi,
the message might be little misleading but as part of estimating size of the backup items, we enumerate what all files and directories need to be backed up based on whether they changed from last backup and then start backing them up. if you have huge amount
of files and directories say like a build server then its likely you will be seeing this. We already have a feature request to improve this for such kind of workloads.
Thanks
Prashanth

When I try to snyc my iphone 5 or iPad 2 iTunes 11 takes an excessive amount of time recognizing them, please help!

iTunes 11 is junk and when I updated to it, it now takes at least 25 minutes for itunes to recognize my iphone or ipad. This is so frustratinig when I want to quickly sync new music, videos, etc...
I have tried everything under the sun to fix the problem including resoring software and even trying to downgrade to iTunes 10.
Is anyone else experiencing these same issues? if so were you able to find a fix?
Your help is appreciated.

No one else is seeing this. Time to troubleshoot your computer - nothing to do with iTunes itself unless it was incorrectly installed. Not the phone either.

HT201272 I spend a considerable amount of time in Asia and am finding the ability to download previous purchases now shown on my iCloud account. Music appears fine and most movies are OK but I have problems with all music videos included with album purch

I am finding the ability to download previous purchases now shown on my iCloud account to be difficult. Music appears fine and most movies are OK but I have problems with all music videos included with album purchases. Any ideas?

Phillip_dc wrote:
Firstly, I purchased my first iPhone a few years ago, since then there have been a lot of apps released, a lot which I downloaded for free, tried and deleted from both my phone and my iTune 'Apps' Panel. What bothers me is when I do get a new iOS device, iPad and/or iPhone 5, and I don't want to just copy the back-up of my current iOS device to the new one, then to get the apps I want I will have to scroll through countless useless 'trash' applications in my purchase history to 'cloud download' the ones I want.
Just sync the apps you want from your computer. You don't need to redownload them directly on the iPhone Purchased list.
Will Apple be employing such a feature, a 'permanently delete/un-purchase' feature?
Dunno.
Send suggestions here -> http://www.apple.com/feedback/

[IE11] Expanding a group of items in a list takes an absurd amount of time

I'm currently dealing with a large sized list (<10,000 items) that is grouped by date, then subgrouped by a department name. A user had called in reporting that their browser (Internet Explorer 11) would become non-responsive whenever a group is expanded
- it may sit there for ~15 seconds, then eventually open the list. I can confirm this behavior on my own computer, same browser. An older (slower) computer did not exhibit this behavior, and it seems only recently that our computers have started doing this.
The odd thing is that when I use Mozilla Firefox, the list expanding works fine.
The above profiling session seems to show an EnsureSelectionHandlerDeferred JS function is tying things up... but why?

If your environment is OOB then, it won't default to IE8. In scenario where we have deployed some solution in the farm for some custom features, Developers generally put this string inside the code so all the images and other thing would load as expected
and browser compatibility won't be the issue. But, in real world there are some other features which gets broken by using this.
So, i would recommend you to check if there is any custom solution, custom master page or custom page inside your environment? If there is then please check if below mentioned string is not mentioned.
<meta http-equiv="X-UA-Compatible" content="IE=8">
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Invalid or unknown NLS parameter value specifiedBR0310E Connect to database

Dear all ,
While installing Db instance (4.7 e,HPIA64-oracle), in database update stati.
got error like
"WARNING 2008-03-19 01:36:25
Execution of the command "/sapmnt/C2P/exe/brconnect -u / -c -f crsyn -o SAPC2P" finished with return code 3. Output: BR0801I BRCONNECT 6.40 (11)BR0280I BRCONNECT time stamp: 2008-03-19 01.36.25BR0301E SQL error -12705 at location db_connect-2ORA-12705: invalid or unknown NLS parameter value specifiedBR0310E Connect to database instance C2P failed
ERROR 2008-03-19 01:36:25
CJS-00288 Could not update database statistics. DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPC2P returned 3. SOLUTION: See brconnect.log for details.
Brconnect.log shows like
R0801I BRCONNECT 6.40 (11)
BR0280I BRCONNECT time stamp: 2008-03-19 01.36.25
BR0301E SQL error -12705 at location db_connect-2
ORA-12705: invalid or unknown NLS parameter value specified
BR0310E Connect to database instance C2P failed
BR0280I BRCONNECT time stamp: 2008-03-19 01.36.25
BR0804I BRCONNECT terminated with errors
How resolve this issue.
Regards,
satish kumar

Hi Sergo,
those notes are a bit outdated, that is the reason I indicate to read the FAQ.
If you read it carefully you will realize of several things:
1) the oracle client to be used depends on the SAP kernel version
2) the way the oracle client is "linked" with the kernel depends also on the version.
You can take a look at the powerpoint attached to the note.
For the sake of simplification I'll go from kernel 4.6D (and forgot the exceptions)
Kernel 4.6D was linked against oracle client 8.0
The ORA_NLS33 has to point to the NLS files of that version. But oracle made something easier.
Oracle NLS files for version 8.1 are also compatible with 8.0.
This means that, even when the client was 8.0, you could use NLS files of 8.1.7 without any error (the one is refered in this thread)
Another thing is that the oracle client library was included on the SAP kernel, it was statically linked, SAP only needed the NLS files.
This changed a little with newer kernels.
What happens with Kernel 6.20?
SAP does not includes the client inside the KERNEL, now the oracle library is dinamically linked. By default the kernel looks for it on the /oracle/client/81x_64/lib (assumming here 64 bit)
ORA_NLS33 can point to the oracle client or the oracle home, again we have compatibility.
But, then oracle start doing "funny" things with oracle 9i.
SAP kernel 6.40 is dynamically linked against this oracle client version. Now the search directory is /oracle/client/92x_64. But NLS files are not backwards compatible (later on Oracle provided information about a couple of environment variables to be able to use 9i nls files with 8x client)
it is more, nls files are not even compatible between oracle 9i versions.
For that reason, it could be that you have installed in your oracle home, lets say 9.2.0.7 and your ORA_NLS33 pointing to the oacle home.
But SAP kernel is using (if your environmet variables are OK) the library on the /oracle/client/92x_64 and you get the error ORA-12705 even when you think everything is OK.
Again, my recommendation is to follow the proper note.
If you are using a kernel that uses the client 9.2 then you have to configure the environment variables as the correspondent note for that client (539922 Installing the ORACLE client software 9.2.X for UNIX t) or other note that could complement it (like installing several clients on one server)
Hope the explanation is clear.
Note. This is only valid for UNIX, in windows it is a different history.

What's wrong with this MySQL connection? "Could not create connection to database server"

I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out. It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea. The MySQL account has full priviledges.
Here is the message when I try to validate the data source:
Connection verification failed for data source: test
com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.
The root cause was that: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.

This happened on two servers. One one, the cause was that skip-networking was turned on. In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test. Even though I edited the data source in the CF administrator, it still didn't work (very misleading). When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
Has anyone else seen this problem with the case sensitive database names? And with the data source in CF not updating the case correctly? Seems like a bug in CF.

Not able to connect to Database

My SQL.NET entry is
# Copyright (c) 1996, 2003, Oracle Corporation. All rights reserved.
# NAME
# sqlnet.ora
# FUNCTION
# Oracle Network Client startup parameter file example
# NOTES
# This file contains examples and instructions for defining all
# - ONames Client ----------------------------------------------------
#names.default_domain = world
#Syntax: domain-name
#Default: NULL
# Indicates the domain from which the client most often requests names. When
# this parameter is set the default domain name (for example, US.ACME), the
# domain name will be automatically appended to any unqualified name in an
# ONAmes request (query, register, deregister, etc). Any name which contains
# an unescaped dot ('.') will not have the default domain appended. Simple
# names may be qualified with a trailing dot (for example 'rootserver.').
#names.initial_retry_timeout = 30
#Syntax: 1-600 seconds
#Default: 15 (OSD)
# Determines how long a client will wait for a response from a Names Server
# before reiterating the request to the next server in the preferred_servers
# list.
#names.message_pool_start_size = 10
#Syntax: 3-256
#Default: 10
# Determines the initial number of messages allocated in the client's message
# pool. This pool provides the client with pre-allocated messages to be used
# for requests to ONames servers. Messages which are in the pool and unused
# may be reused. If a message is needed and no free messages are available in
# the pool more will be allocated.
#names.preferred_servers = (address_list =
# (address=(protocol=ipc)(key=n23))
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (address=(protocol=tcp)(host=cicada)(port=1575))
#Syntax: ADDR_LIST
#Default: Well-Known (OSD)
# Specifies a list of ONames servers in the client's region; requests will be
# sent to each ADDRESS in the list until a response is recieved, or the list
# (and number of retries) is exhausted.
# Addresses of the following form specify that messages to the ONames server
# should use Oracle Remote Operations (RPC):
# (description =
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (connect_data=(rpc=on))
#names.request_retries = 2
#Syntax: 1-5
#Default: 1
# Specifies the number of times the client should try each server in the list
# of preferred_servers before allowing the operation to fail.
#names.directory_path
#Syntax: <adapter-name>
#Default: TNSNAMES,ONAMES,HOSTNAME
# Sets the (ordered) list of naming adaptors to use in resolving a name.
# The default is as shown for 3.0.2 of sqlnet onwards. The default was
# (TNSNAMES, ONAMES) before that. The value can be presented without
# parentheses if only a single entry is being specified. The parameter is
# recognized from version 2.3.2 of sqlnet onward. Acceptable values include:
# TNSNAMES -- tnsnames.ora lookup
# ONAMES -- Oracle Names
# HOSTNAME -- use the hostname (or an alias of the hostname)
# NIS -- NIS (also known as "yp")
# CDS -- OSF DCE's Cell Directory Service
# NDS -- Novell's Netware Directory Service
# - Client Cache (ONRSD) ---------------------------------------------
#names.addresses = (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
#Syntax: ADDR
#Default: (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
# Address on which the client cache listens (is available to clients).
# Any valid TNS address is allowed. The default should be used if at
# all possible; clients have this entry hardwired as the first line
# of their server-list file (sdns.ora). If the address is set to a
# non-default value the client's preferred_servers parameter should
# be set to include the client-cache address first.
#names.authority_required = False
#Syntax: T/F
#Default: False
# Determines whether system querys (for the root etc) require Authoritative
# answers.
#names.auto_refresh_expire = 259200
#Syntax: Number of seconds, 60-1209600
#Default: 259200
# This is the amount of time (in seconds) the server will cache the addresses
# of servers listed in server-list file (sdns.ora). When this time expires the
# server will issue another query to the servers in those regions to refresh
# the data.
#names.auto_refresh_retry = 180
#Syntax: Number of seconds, 60-3600
#Default: sec. 180
# This set how often the server will retry when the auto_refresh query fails.
#names.cache_checkpoint_file = cache.ckp
#Syntax: filename
#Default: $ORACLE_HOME/network/names/ckpcch.ora
# Specifies the name of the operating system file to which the Names Server
# writes its foreign data cache.
#names.cache_checkpoint_interval = 7200
#Syntax: Number of seconds, 10-259200
#Default: 0 (off)
# Indicates the interval at which a Names Server writes a checkpoint of its
# data cache to the checkpoint file.
#names.default_forwarders=
# (FORWARDER_LIST=
# (FORWARDER=
# (NAME= rootserv1.world)
# (ADDRESS=(PROTOCOL=tcp)(PORT=42100)(HOST=roothost))))
#Syntax: Name-Value/address_list
#Default: NULL
# A list (in NV form) of the addresses of other servers which should be used to
# forward querys while in default_forwarder (slave) mode. NAME is the global
# names for the server to which forwards whould be directed, and ADDRESS is its
# address.
#names.default_forwarders_only = True
#Syntax: T/F
#Default: False
# When set to true this server will use the servers listed in default_forwarders
# to forward all operations which involve data in foreign regions. Otherwise it
# will use the servers defined in the server-list file (sdns.ora) in addition
# to any defined in the default_forwarders parameter.
#names.log_directory = /oracle/network/log
#Syntax: directory
#Default: $ORACLE_HOME/network/log
# Indicates the name of the directory where the log file for Names Server
# operational events are written.
#names.log_file = names.log
#Syntax: filename
#Default: names.log
# The name of the output file to which Names Server operational events are
# written.
#names.log_stats_interval = 3600
#Syntax: Number of seconds, 10-ub4max
#Default: sec. 0 (off)
#Specifies the number of seconds between statistical entries in log file.
#names.log_unique = False
#Syntax: T/F
#Default: False
# If set to true the server will guarantee that the log file will have a unique
# name which will not overwrite any existing files (note that log files are
# appended to, so log information will not be lost if log_unique is not true).
#names.max_open_connections = 10
#Syntax: 3-64
#Default: 10
# Specifies the number of connections that the Names Server can have open at any
# given time. The value is generated as the value 10 or the sum of one
# connection for listening, five for clients, plus one for each foreign domain
# defined in the local administrative region, whichever is greater. Any
# operation which requires the server to open a network connection will use
# an already open connection if it is available, or will open a connection
# if not. Higher settings will save time and cost network resources; lower
# settings save network resources, cost time.
#names.max_reforwards = 2
#Syntax: 1-15
#Default: 2
# The maximum number of times the server will attempt to forward a certain
# operation.
#names.message_pool_start_size = 24
#Syntax: 3-256
#Default: 10
# Determines the initial number of messages allocated in the server's message
# pool. This pool provides the server with pre-allocated messages to be used
# for incoming or outgoing messages (forwards). Messages which are in the pool
#names.trace_file = names.trc
#Syntax: filename
#Default: names.trc
# Indicates the name of the output file from a Names Server trace session.
#names.trace_func # NA
#Syntax: T/F
#Default: False
# Internal mechanism to control tracing by function name.
#names.trace_level = ADMIN
#Syntax: T/F
#Default: False
#Syntax: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
# Indicates the level at which the Names Server is to be traced.
# Available Values:
# 0 or OFF - No trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - WorldWide Customer Support trace information
#names.trace_mask = (200,201,202,203,205,206,207)
#namesctl.trace_unique = True
#Syntax: T/F
#Default: False
# Indicates whether each trace file has a unique name, allowing multiple trace
# files to coexist. If the value is set to ON, a process identifier is appended
# to the name of each trace file generated.
#namesctl.no_initial_server = False
#Syntax: T/F
#Default: False
# If set to TRUE namesctl will suppress any error messages when namesctl is
# unable to connect to a default names server.
#namesctl.internal_use = True
#Syntax: T/F
#Default: False
# If set to true namesctl will enable a set of internal undocumented commands.
# All internal commands are preceded by an underscore ('_') in order to
# distinguish them as internal. Without going into details, the commands
# enabled are:
# _max_reforwards _modify_ops_enabled
# _next_cache_checkpoint _next_cache_flush
# _next_stat_log _next_stat_reset
# _reload _request_delay
# _restart _shutdown
#namesctl.noconfirm = True
#Syntax: T/F
#Default: False
# When set to TRUE namesctl will suppress the confirmation prompt when
# sensitive operations (stop, restart, reload) are requested. This is
# quite helpful when using namesctl scripts.
#namesctl.server_password = mangler
#Syntax: string
#Default: NULL
# Automatically sets the password for the names server in order to perform
#Default: /.:/subsys/oracle/names
#Specifies the DCE cell (prefix) to use for name lookup.
#names.nds.name_context = personnel.acme
#Syntax: NDS name
#Default: (OSD?)
# Specifies the default NDS name context in which to look for the name to
# be resolved.
#names.nis.meta_map # NA
# Syntax: filename
# The acceptable difference in the number of seconds between when a
# credential was sent and when it was received.
#sqlnet.kerberos5_clockskew=600
#sqlnet.kerberos5_conf
# Syntax: Any valid pathname.
# Default: /krb5/krb.conf
# The Kerberos configuration pathname.
#sqlnet.kerberos5_conf=/tmp/mykrb.conf
#sqlnet.kerberos5_realms
# Syntax: Any valid pathname
# Default: /krb5/krb.realms
# The Kerberos host name to realm translation file.
#sqlnet.kerberos5_realms=/tmp/mykrb.realms
#sqlnet.kerberos5_keytab
# Syntax: Any valid pathname.
# Default: /etc/v5srvtab
# The Kerberos secret key file.
## Parameters used with Radius adapter
# Need to specify the location of the Radius server
#sqlnet.radius_authentication = localhost
# Need to specify the port address of the Radius server
#sqlnet.radius_authentication_port = 1654
# If your radius server support accounting, you can enable it
#sqlnet.radius_accounting = off
# Turn on/off challenge response
#sqlnet.radius_challenge_response = off
# Keyword to request a challenge from Radius server.
# If you use activcard, enter activcard
# If you use something else, enter challenge
#sqlnet.radius_challenge_keyword = challenge
# Enter the name of the client interface you want to use for challenge response
#sqlnet.radius_authentication_interface = DefaultRadiusInterface
# Where is the secret file locate
#sqlnet.radius_secret = $ORACLE_HOME/security/radius.key
# ACCEPTED The service will be active if the other side of the
# connection specifies "REQUESTED" or REQUIRED" and
# there is a compatible algorithm available on the other
# side; it will be inactive otherwise.
# REJECTED The service must not be active, and the connection
# will fail if the other side specifies "REQUIRED".
# REQUESTED The service will be active if the other side specifies
# "ACCEPTED", "REQUESTED", or "REQUIRED" and there is a
# compatible algorithm available on the other side; it
# will be inactive otherwise.
# REQUIRED The service must be active, and the connection will
# fail if the other side specifies "REJECTED" or if there
# is no compatible algorithm on the other side.
#sqlnet.crypto_checksum_types_client
#sqlnet.crypto_checksum_types_server
#sqlnet.encryption_types_client
#sqlnet.encryption_types_server
# These parameters control which algorithms will be made available for
#ssl_server_dn_match
# Systax: ON/OFF
# Default: OFF
# The ssl_server_dn_match parameter determines SSL behavior when the
# server's distinguished name does not match the service name. When
# set to ON, the names must match for a connection to be established.
# Leaving the parameter on OFF allows connection to servers where
# the names do not match. However, this may potentially allow servers
# to fake their identity.
#ssl_client_authentication
# Syntax: TRUE/FALSE
# Default: TRUE
# The ssl_client_authentication parameter controls whether the client
# is authenticated using SSL. This parameter should be set to FALSE if
# using a cipher suite that contains Diffie-Hellman anonymous
# authentication (DH_anon) or if using other non-SSL authentication
# methods.
#ssl_cipher_suites
# Syntax: (SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_RC4_128_SHA,
# SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_DES_CBC_SHA,
# SSL_DH_anon_WITH_3DES_EDE_CBC_SHA, SSL_DH_anon_WITH_RC4_128_MD5,
# SSL_DH_anon_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5,
# SSL_RSA_EXPORT_WITH_DES40_CBC_SHA,
# SSL_DH_anon_EXPORT_WITH_RC4_40_MD5,
# SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA)
# Default: All cipher suites enabled
# ssl_cipher_suites defines a list of cipher suites used to negotiate
# an SSL connection in order of priority. The cipher suites selected for
# a server must be compatible with those required by the client.
#ssl_version
# Syntax: 0/2.0/3.0
# Default: 0 (impiles 3.0)
# The ssl_version parameter defines the version of SSL that must
# run on the systems with which the client communicates.
# - SSL ---------------------------------------------------------------------
#my_wallet
# Syntax: A properly formatted NLNV list.
# Default: Platform specific. Unix: $HOME/oracle/oss
# The method for retrieving and storing my identity.
#my_wallet
# =(source
# =(method=file)
# (method_data=/dve/asriniva/oss/wallet)
# - Sqlnet(v2.x) and Net3.0 Client ------------------------------------------
# In the following descriptions, the term "client program" could mean
# either sqlplus, svrmgrl or any other OCI programs written by users
#trace_level_client = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the client program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#trace_directory_client = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the client execution are written.
#Supported since: v2.0
#trace_file_client = /oracle/network/trace/cli.trc
#Possible values: Any valid file name
#Default: $ORACLE_HOME/network/trace/cli.trc ($ORACLE_HOME =
# /oracle at customer site)
#Purpose: Indicates the name of the file to which the execution trace
# of the client is written to.
#Supported since: v2.0
#trace_unique_client = ON
#Possible values: {ON, OFF}
#Default: OFF
#Purpose: Used to make each client trace file have a unique name to
# prevent each trace file from being overwritten by successive
# runs of the client program
#Supported since: v2.0
#log_directory_client = /oracle/network/log
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/log ($ORACLE_HOME = /oracle at customer
# site)
#Purpose: Indicates the name of the directory to which the client log file
# is written to.
#Supported since: v2.0
#log_file_client = /oracle/network/log/sqlnet.log
#Possible values: This is a default value, u cannot change this
#Default: $ORACLE_HOME/network/log/sqlnet.log ($ORACLE_HOME=/oracle in
# customer site)
#Purpose: Indicates the name of the log file from a client program
#Supported since: v2.0
#log_directory_server = /oracle/network/trace
#Possible values: Any valid diretcory path with write permission
#Default: $ORACLE_HOME/network/trace ( $ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which log files from the
# server are written
#Supported since: v2.0
#trace_directory_server = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network_trace ( $ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the server are written
#Supported since: v2.0
#trace_file_server = /orace/network/trace/svr_<pid>.trc
#Possible values: Any valid filename
#Default: $ORACLE_HOME/network/trace/svr_<pid>.trc where <pid? stands for
# the process id of the server on UNIX systems
#Purpose: Indicates the name of the file to which the execution trace of
# the server program is written to.
#Supported since: v2.0
#trace_level_server = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#use_dedicated_server = ON
#Possible values: {OFF,ON}
#Default: OFF
#Purpose: Forces the listener to spawn a dedicated server process for
# sessions from this client program.
#Supported since: v2.0
#use_cman = TRUE
#Possible values: {TRUE, FALSE}
#Default: FALSE
#Purpose:
#Supported since: v3.0
#tnsping.trace_directory = /oracle/network/trace
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the directory to which the execution trace from
# the tnsping program is to be written to.
#Supported since: v2.0
#tnsping.trace_level = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#sqlnet.expire_time = 10
#Possible values: 0-any valid positive integer! (in minutes)
#Default: 0 minutes
#Recommended value: 10 minutes
#Purpose: Indicates the time interval to send a probe to verify the
# client session is alive (this is used to reclaim watseful
# resources on a dead client)
#Supported since: v2.1
#sqlnet.client_registration = <unique_id>
#Possible values:
#Default: OFF
#Purpose: Sets a unique identifier for the client machine. This
# identifier is then passed to the listener with any connection
# request and will be included in the Audit Trail. The identifier
# can be any alphanumeric string up to 128 characters long.
#Supported since: v2.3.2
#bequeath_detach = YES
#Possible values: {YES,NO}
#Default: NO
#Purpose: Turns off signal handling on UNIX systems. If signal handling
# were not turned off and if client programs written by users make
# use of signal handling they could interfere with Sqlnet/Net3.
#Supported since: v2.3.3
#automatic_ipc = OFF
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: Force a session to use or not to use IPC addresses on the
# client's node.
#Supported since: v2.0
#disable_oob = ON
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: If the underlying transport protocol (TCP, DECnet,...) does
# not support Out-of-band breaks, then disable out-of-band
# breaks
#Supported since: v2.0
#sqlnet.inbound_connect_timeout = 3
#Possible values: 0-any valid positive integer (in seconds)
#Default: 0
#Recommended value: 3 seconds (note: this is highly application dependent)
#Purpose: Indicates the time interval within which database authentication
# for a client must be completed. If the client fails to complete
# authentication within the given time period, then the database
# server will drop the client connection. This can be used to
# counter Denial of Service attacks in which malicious clients may
# cause numerous servers to be spawn without fully establishing DB
# sessions.
# A value of 0 turns off the timeout feature. If a spurious
# timeout error occurs (e.g. due to a slow network/system),
# reconfigure this parameter to a larger value.
#Supported since: v9.2
{code}
and my tns file entry is
{code}
# This file contains the syntax information for
# the entries to be put in any tnsnames.ora file
# The entries in this file are need based.
# There are no defaults for entries in this file
# that Sqlnet/Net3 use that need to be overridden
# Typically you could have two tnsnames.ora files
# in the system, one that is set for the entire system
# and is called the system tnsnames.ora file, and a
# second file that is used by each user locally so that
# he can override the definitions dictated by the system
# tnsnames.ora file.
# The entries in tnsnames.ora are an alternative to using
# the names server with the onames adapter.
# They are a collection of aliases for the addresses that
# the listener(s) is(are) listening for a database or
# several databases.
# The following is the general syntax for any entry in
# a tnsnames.ora file. There could be several such entries
# tailored to the user's needs.
<alias>= [ (DESCRIPTION_LIST = # Optional depending on whether u have
 # one or more descriptions
 # If there is just one description, unnecessary ]
 (DESCRIPTION=
 [ (SDU=2048) ] # Optional, defaults to 2048
 # Can take values between 512 and 32K
 [ (ADDRESS_LIST= # Optional depending on whether u have
 # one or more addresses
 # If there is just one address, unnecessary ]
 (ADDRESS=
 [ (COMMUNITY=<community_name>) ]
 (PROTOCOL=tcp)
 (HOST=<hostname>)
 (PORT=<portnumber (1521 is a standard port used)>)
 [ (ADDRESS=
 (PROTOCOL=ipc)
 (KEY=<ipckey (PNPKEY is a standard key used)>)
 [ (ADDRESS=
 [ (COMMUNITY=<community_name>) ]
 (PROTOCOL=decnet)
 (NODE=<nodename>)
 (OBJECT=<objectname>)
 ... # More addresses
 [ ) ] # Optional depending on whether ADDRESS_LIST is used or not
 [ (CONNECT_DATA=
 (SID=<oracle_sid>)
 [ (GLOBAL_NAME=<global_database_name>) ]
 [ (SOURCE_ROUTE=yes) ]
 (DESCRIPTION=
 [ (SDU=2048) ] # Optional, defaults to 2048
 # Can take values between 512 and 32K
 [ (ADDRESS_LIST= ] # Optional depending on whether u have more
 # than one address or not
 # If there is just one address, unnecessary
 (ADDRESS
 [ (COMMUNITY=<community_name>) ]
 (PROTOCOL=tcp)
 (HOST=<hostname>)
 (PORT=<portnumber (1521 is a standard port used)>)
 [ (ADDRESS=
 (PROTOCOL=ipc)
 (KEY=<ipckey (PNPKEY is a standard key used)>)
 ... # More addresses
 [ ) ] # Optional depending on whether ADDRESS_LIST
 # is being used
 [ (CONNECT_DATA=
 (SID=<oracle_sid>)
 [ (GLOBAL_NAME=<global_database_name>) ]
 [ (SOURCE_ROUTE=yes) ]
 [ (CONNECT_DATA=
 (SID=<oracle_sid>)
 [ (GLOBAL_NAME=<global_database_name>) ]
 ... # More descriptions
 [ ) ] # Optional depending on whether DESCRIPTION_LIST is used or not
{code}
DATABASE-10G CLIENT

Hi Rahul,
this question does not seem to be related to SQL and PL/SQL forum.
I guess you could use {forum:id=64} or {forum:id=61} forums.
Regards.
Al

JSF-ADF // no more connection ? // database unreachable

Hi,
I developed a very simple application with a list on one page, an edit form on a second and a create form on a third page. Easy. No login.
Everything seems ok but after a certain amount of time, creation and edit don't work anymore. After a while, I can still change some value in my edit form and I'm able to commit them.
But I have two fields with a validation. This validation is made with a query validation at the entity level.
After a while, the system tells me that the validation fails (on these 2 fields) because "JBO-25200: Application module is not connected to a database".
So I'm no more able to insert a new record. But I still can change et commit old ones !?
Even if I restart my brower, it doesn't work, nor on other PC. I have to reload the webapplication.
Any ideas
For information, I use
jdev 10.1.3.0.4 whith ADF 10.1.3.36 and Tomcat 5.5.20, everything on windows
but I 'm pretty sure this is not the problem.

Nice idea, but exactly the same error (see below)
But even in the case of a network problem, then I should not be able to update (except those fields) old records . It is the validation step at the entity level that seems to cause some problem.
Do I have to take care to some configuration parameters of the module ?
JBO-27025: Failed to validate attribute SiteId with value AUT
JBO-27014: Attribute SiteId in ModuleDeBase.DemandeVO is required
JBO-27025: Failed to validate attribute TypeDi with value LAPTOP
JBO-27014: Attribute TypeDi in ModuleDeBase.DemandeVO is required
JBO-27024: Failed to validate a row with key oracle.jbo.Key[-7 ] of type ModuleDeBase.DemandeVO
JBO-27120: SQL error during query execution. Statement: select code from ifin_lsa_code where domaine_code='SITE'
JBO-25200: Application module is not connected to a database
JBO-27120: SQL error during query execution. Statement: select code from ifin_lsa_code where domaine_code='TYPE_DI'
JBO-25200: Application module is not connected to a database
JBO-27027: Missing mandatory attributes for a row with key oracle.jbo.Key[-7 ] of type ModuleDeBase.DemandeVO

Managed Server can not connect to Database

I have a WebLogic cluster with three managed Server on 3 different machines.
ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
Ravi Jegga

Enterprise manager is not able to connect to database instance

Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?

user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

Unable to Connect to Database (after server has been re-started)

Hi, I use Essbase Admin Services 7.1.3 and the server was not responding, therefore our IT guys re-started it. Since then I am unable to connect to one of the applications. I have tried to start/Stop the application but it just says "Application did not start". There are 6 databases in this application altogether (3 data and 2 Currency). The application has been there for about 3 years (it holds historic sales data) and there has never been any problems with it. When I tried to Start the application, in the message panel at the bottom it says "Error: 1013015 Unable to Connect to Database (2003)". It's as if there is a problem with this 2003 database but the 2002 and 2004 database are OK. Has anyone ever had this problem and knows how to rectify it?? Thanks in advance. Sarah

It may be that the server restart corrupted the database. Go into database properties and uncheck the box start database with application and then try to restart the application. You can try database validation, or simply reload the database from backup. But you can get the application up and the rest of the databases up by decoupling the database restart from the application start. There will be a .xcp log file in your application directory (and possibly your database directory.) These might help Hyperion Support in identifying the cause of the problem. But the quickest solution would be to reload the database from backup. The serer and application logs can also provide help in identifying the problem. One of the keys is to determine why the server is not responding before restarting the server. It may be that a single application is the source of problem. Typical causes are unscheduled free space restructures, application loads of large databases, and an occasional rogue process. Rather than rebooting the entire box, or even restarting the Essbase server, the safest approach is to only kill the job that is soaking up the cpu cycles, causing the server to be unresponsive. This requires identifying the offending process (esssvr.exe) and killingit. Often that restores the rest of the system to operations, giving you time to focus onthe offending application. You learn thses things when you are pushing the server to its limits (or beyond). If it happens often, you need to do a serious performance audit of teh server and determine whether you need more power and/or memory. And in any case, you are less likely to encounter this sort of problem in the future if you try to limit applications to a single database. This will allow a better utilization of system resources. And also, it's a good idea to shut down applications that you are not going to be using for a while. Every loaded app takes system resources whether or not it is doing anything. So review your list of apps that start on startup and consider unloading apps after completing batch processing. Sorry about the long lecture, but I speak from somewhat painful experience. I hope that this will help you.

Connection to database takes a considerable amount of time

Similar Messages

Maybe you are looking for