Connection to Game Server could not be established

Connection to Game Server could not be established.
Mountain Lion
Thanks, i have found the solution.

Hi,
you have other entries in the /etc/host-file. (tinyumbrella?)
here is the fix :
1) Finder Menu -> Go -> Go to Folder... -> type : /etc/hosts
2) find hosts file and DO BACKUP
3) Copy file (hosts) onto desktop and open with text edit.
Delete everything and paste below :
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Replace file with /etc/hosts (admin permission required)
Reopen Game Center

Similar Messages

Subscriber Status: Connection to the server could not be established

Hi,
I have a cluster of Cisco Callmanager 4.2
all thinks work fine but I have a Problem with Cisco Callmanager serviceability:
When I access to Cisco Callmanager serviceability and go to Tools Service Activation I have a list of my servers and I have this following message for th:
Server: Select a Server
Status: Ready
But when I select my subscriber I have this following message:
Server: 10.150.17.247
Status: Connection to the server could not be established
Same things with Tools Control Center
Server: 10.150.17.247
Status: Connection to the server could not be established
Note: If this server has been permanently removed from the network, use Delete Services utility to remove the database entries.
Same things with Tools Real-Time monitoring Tool
When I Select my subscribers sever I have this message : The specified machine is unavailable.
Nevertheless, database replication work.
Can same one help me and tell me the cause of this problem.
Best regards

This URL should help you:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide_book09186a0080551a86.html

I can not update Quick Time. I get the message "a connection with the server could not be established" I AM connected to the internet. I have purchased QuickTime pro but can not get it uploaded. Help.

I have purchased Quick Time Pro and received my key. I am told to go to QuickTime settings to update and I do not have Quick Time in my control panel.
When I bring up QuickTime and click Help to Update I am told that a connection to the server could not be made due to either the server being down or my computer not having an internet connection. I am connected to the internet so I know that is not the problem.
How do I update my Quick Time player from 7.7.2 to QuickTime Pro that I have purchased?

Launch the QuickTime Player and go "Edit > Preferences > Register", as per the following screenshot:
... that should get you through to the Register Tab in your QuickTime Control Panel.

A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
I am using Windows 7 64 bit.
Many thanks

I was able to download and install the latest version of iTunes (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
Still seeking advice if possible
Cheers

A connection with Quick Time software server could not be established

How do i fix this when trying to update the software?

Let's try installing using an installer from the website rather than using Apple Software Update:
http://support.apple.com/kb/DL837
Any better luck with that one? Or the same message?

Clean Access Server could not establish a secure connection

I have a OOB Real IP GW setup on v4.1.2
I seem to have a problem with the CAS connecting to the CAM although I have added the CAS to the CAM and can manage the CAS from the CAM.
I noticed while troubleshooting client authentication that the client was not being redirected to the logon web page and it had full access to the trusted network from the untrusted authentication vlan. I eventually figured out that if I change the CAS Filter Fallback method from Allow to ignore then it tries to authenticate the client. However the fact that the fallback is activated tells you that something is not right.
I have 2 problems:
A) The clients web page is redirected for authentication but it only lists the domain name in the URL and not the hostname or host IP. In the lab I do not have a DNS server and it would not help as it does not include the hostname in the URL anyway. How do I fix this or perhaps it's related to the 2nd problem.
B) When I manually change the URL by replacing the domain name with the IP of the CAS (untrusted OOB Real IP GW) then I get the following error message when logging on:
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at mydomain.com.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
I would guess the culprit is No 2 but surely the system can run on self signed certificates? I have an NTP server so time is in sync. I have even tried regenerating the cetificates on the CAM
& CAS.
Any ideas?

To overcome problem B, I regenerated the SSL Certificates using the host IP address instead of the name for all the CAM & CAS appliances. This seems to have resolved this problem.
I also SSH'd from each of the CAS's to each of the CAM's from the CLI and it then prompts to permanently store the certificates. I'm not sure it this was necessary though.

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

Trying to update keep getting a message "the ipod software update server could not be contacted Network connection could not be established" using mac OSX. done this with 2 ipod touches??

trying to update 2 ipods but when I go through the process it says "The ipod software update server could not be contacted" "Network connection could not be established". One of the ipods is locked and I don't remember password.

Here's what you can do in case of the forgotten password:
Connect in recovery mode and restore, you'll get the option to rest the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Check this post for the network problem:
https://discussions.apple.com/message/17855328?ac_cid=142432#17855328

Network Error: Clean Access Server could not establish a secure connection to Clean Access Manager

Hello everyone
I am implementing a failover solution of NAC in OOB VG version 4.8, I have 2 CAS and 2 CAM.
The Error I am getting is when I connect to both IP address and the FQDN of the CAS.
===========
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at camsrv3.cadivi.gob.ve.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
==========
For the CAM's I use this names camsrv1 and camsrv2. then generate a CSR in the camsrv1 with the name camsrv3.mycompany.com corresponding to virtual ip and it exported to camsrv2, Install the CA certificate of the company and everything works perfect.
This is the failover configuration
CAM:
Primary:     10.1.206.248 camsrv1.mycompany.com
Secondary: 10.1.206.249 camsrv2.mycompany.com
Virtual:       10.1.206.250 camsrv3.mycompany.com
Then I do exactly the same steps for the CAS's and this is the failover configuration:
Primary:     10.1.216.248 cassrv1.mycompany.com
Secondary: 10.1.216.249 cassrv2.mycompany.com
Virtual:       10.1.216.250 cassrv3.mycompany.com
Then I add the certificate of CAM in the CAS on the tab "Trusted Certificate Authorities" and vice versa.
The communication between all the CAM´s and CAS´s is correct (Primary, Secondary and Virtual). I can ping the IP and the FQDN and I can also manage the CAS through the CAM.
I verify that the time was right in the CAM and the CAS and all good up there.
Appreciate your help
Eduardo Navas

Eduardo,
Bump up the CAS/CAS communications logging on both the CAS and CAMs, and then look in the log files for clues.
On CAM they live in /perfigo/control/tomcat/logs and on CAS in /perfigo/access/tomcat/logs
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily

ESB Server connection could not be established via Jdeveloper or using ant

When I try to deploy a ESB project using ant in a remote virtual linux machine
via command mode,I am getting deployment failed message as below suggesting to check whether ESB server is running.
./ant outputs the following:
Buildfile: build.xml
deployProjects:
[echo] deploying esb project files
[deployESBProjects] Deployment Failed ...Check if server at 132.146.44.93 is running
[deployESBProjects] ESB Project </data/ESB_Samples/CPL_US_001> successfully deployed
[echo] esb project files deployed
BUILD SUCCESSFUL
Total time: 0 seconds
./opmnctl status -l oututs the following:
Processes in Instance: SOA_NFT.RHEL4AS
-------------------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | mused | uptime | ports
-------------------------------------------------------------------------------------------------------+------
OC4JGroup:default_group | OC4J:home | 1051 | Alive | 1610238535 |3616 | 20:41:30 | jms:12601,http:8888,rmis:12701,rmi:12401
ASG | ASG | N/A | Down | N/A | N/A | N/A | N/A
HTTP_Server | HTTP_Server | 1050 | Alive | 1610238534 |1820 | 20:41:20 | https1:4443,http2:7200,http1:7777
./opmnctl status -app outputs the following:
Applications in Instance: SOA_NFT.RHEL4AS
application type: OC4J
pid | name | state | rtid | classification | routable | parent
1051 | hw_services | started | g_rt_id | internal-BPEL | true | orabpel
1051 | ruleauthor | started | g_rt_id | internal-Rules | true | default
1051 | system | started | g_rt_id | external | true |
1051 | WSIL-App | started | g_rt_id | internal | true | default
1051 | orainfra | started | g_rt_id | internal | true | default
1051 | datatags | started | g_rt_id | internal | true | default
1051 | orabpel | started | g_rt_id | internal-BPEL | true | default
1051 | gateway | started | g_rt_id | internal-WSM | true | default
1051 | rulehelp | started | g_rt_id | internal-Rules | true | default
1051 | ccore | started | g_rt_id | internal-WSM | true | default
1051 | policymanager | started | g_rt_id | internal-WSM | true | default
1051 | default | started | g_rt_id | external | true | system
1051 | esb-rt | started | g_rt_id | internal-ESB | true | esb-dt
1051 | ascontrol | started | g_rt_id | external | true | system
1051 | coreman | started | g_rt_id | internal-WSM | true | default
1051 | esb-dt | started | g_rt_id | internal-ESB | true | default
1051 | javasso | started | g_rt_id | internal | true | default
Also when I try to create Appliocation Server connection using opmn port 6003 from my local Jdeveloper,the test connection fails.
While creating Application Server connection in Jdeveloper, the connection Test succeeds when I select Standalone server and
using RMI port 12401.Maenwhile, the Integration Server connection using the above Application Server connection created and port 8888 when tested
displays
Application Server: OK
BPEL Process Manager Server: OK
ESB Server: FAILED
ESB Server failue detail: ESB connection failed.
ESB Server connection could not be established.
The SOA was installed in silent mode after resolving many issues detailed in SR 6622260.992

Can you try changing the port to 80 while creating connection.

The ipod software update server could not be contacted.the network connection could not be established

the ipod software update server could not be contacted.the network connection could not be established

Try changeing the DSN server. See:
iOS 5 update issues "Network...: Apple Support Communities

I keep getting "the network connection could not be established" error message when trying to update my iPads and iPhone to iOS 5.1

I keep getting "the network connection could not be established" message when trying to update my iPad, iPad2 and iPhone4 devices using either my iMac or MacBook. The Macs and iOS devices are apparently working correctly otherwise. Problem started about a day ago when I connected one of the iPads to my iMac and iTunes notified my of an update for the device. I tried and got the above message. Tryied other iPad2 and iPhone4 and get the same message. Also, get same message when trying to update using the MacBook. My system SW is 10.7.3 on the iMac and 10.6.8 on MacBook. iTunes is version 10.6. Have gone thru the check list of things to check and have re-started. Would appreciate any ideas. Thanks.

Another user named Springbk posted a fix that worked for me as I was having the same problem today:
I Changed my DNS settings to OpenDNS
On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
change DNS by adding ( + )
208.67.222.222
then
208.67.220.220
click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

SSL/TLS - secure connection could not be established but passes diagnostics

Any other ideas for the ever popular inability to create a secure connection issue?
I've tried just about everything I could find in all the posts on this issue and continue to get the inability to create a secure connection messag4e when logging in.
We tried the various Apple non-support channels: e-mail, chat, phone, and Genius Bar with no success.
Here's what I've tried (attempting to log in after each change):
SSL3.0 and TLS 1.0 are enabled (and always have been)
iTunes and iTunes Helper are in the Windows Firewall Exception list
reinstalled itunes 9.02 several times.
UNINSTALLED Norton Internet Security
Turned off Windows firewall.
deleted contents of /etc/hosts
Cleared SSL state
Unchecked “Check for server certificate revocation, restarted IE
--After this change I got an "network connection timed out." message
Cleared SSL state
--Back to "secure network connection could not be established"
This happens on my daughter's college network and on our home family area network. And other PCs have no trouble accessing this iTunes account on both of these networks.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
-Griff W.

Adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.

In our R12.1.3 EBS, on RHEL 5.5, 64-bit, we are getting this error -
adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
However, neither the db is down nor the APPS password is wrong. I am able to connect from sqlplus from application tier. And also from the 10.1.3 home. I have checked similar threads here but none helped. Raised an SR yesterday but that too hasn't helped yet.
Any ideas?
Regards,
Vinod

please post he output of
SQL> show parameter sec_case_sensitive_logon
$ECHO TWO_TASK
clean FND NODES
How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Check if all services are down on application node, no process should be running.
shut down db listener and database
reboot the server
start or reload listener on DB node and start the database
Run autoconfig on db tier -- make sure it completes successfully.
Run autoconfig on all apps tier -- make sure it completes successfully.
Now, try to start applications on middle tier.
ApPsMaStI
sharing is Caring

A connection could not be established...

Hi, i am undergraduate junior student who just joined a summer research lab where I need to use labview and fpga; however, all previous members all graduated last semester so there is no one who can teach me labview and what they were doing....(I really need help..)
The first problem is whenever i try to run a FPGA code the previous people made, i get : "A connection could not be established to the specified remote device. Ensure the device is on an accessible over the network, that NI-RIO software is installed, and that the RIO server running and properly configured."
In the lab labtop, there are
Labview 2012 SP1 (32 bit), NI-RIO130, Labview Real Time 2012 f1, NI-RIO FPGA driver.... and maybe some files I can't find in this messy disordered labtop.
I have CRIO-9113, NI-CRIO9022, NI-9234, NI-9269 (all four are connected, and power is green on and connected to this labtio.)
Later, i found same probelm when I try to add device on Project Explorer (FPGA Target -> new -> c series module -> "A connection could not be established to the specified remote device. Ensure the device is on an accessible over the network, that NI-RIO software is installed, and that the RIO server running and properly configured.")
Can anyone tell me why there is connection error?

Hey rhksgud92,
With CompactRIO, you have to specify an IP address to connect to and program the target. In MAX (Measurement and Automation Explorer), expand the 'Remote Systems' category in the left pane and your cRIO should be located on that list. Select it, and then view the 'Network Settings' cetegory in the middle pane. Here you should see an IP address listed for your target.
Copy this IP address and open your LabVIEW project. In the project tree, right-click on the cRIO and select 'Properties'. In the windows that pops up, you should see an entry field for the IP address. Paste the value from MAX here (and make sure that it is still formatted correctly). Now you should be able to right-click the cRIO in the project and select 'Connect' with success.
I agree with Hooovahh that you are going to have a steep learning curve trying to use LabVIEW and CompactRIO for the first time without training. To make it a little easier, we do have some resources that can help you. First, since you are a student, if your school has an active Academic Site License (ASL), you can get free access to all of NI's self-paced online training resources. If you aren't sure if you have an active ASL, just ask your professor or IT division that handles your school's LabVIEW licensing. Since you are so new, I highly recommend you start with LabVIEW Core 1 & 2, and then proceed to Real-Time 1 and FPGA to learn how to use your CompactRIO.
If you don't have an active ASL, you can still follow some of the video tutorials for students for both LabVIEW and RIO, which should help you out quite a bit. Check out the link below. Lastly, I recommend becoming very familiar with the CompactRIO Developer's Guide (also linked below). This guide is a great resource for how to implement many different features and architectures in RIO applications, for both RT and FPGA.
Academic Online Training:
http://us.ni.com/academic/training
NI LabVIEW for CompactRIO Developer’s Guide:
http://www.ni.com/pdf/products/us/fullcriodevguide.pdf
Regards,
Ryan

Connection to Game Server could not be established

Similar Messages

Maybe you are looking for